[+]Debian10 nie montuje telefonu z Androidem Temat rozwiązany

Ogólne pytania dotyczące systemu
Awatar użytkownika
hsurim
Beginner
Posty: 270
Rejestracja: 05 maja 2014, 17:15
Lokalizacja: Warszawa (mazowieckie)

[+]Debian10 nie montuje telefonu z Androidem

Post autor: hsurim » 25 sierpnia 2019, 18:21

Witam.
Ta przypadłość występuje na trzech komputerach po czystej instalacji Debian10 - w Debian9 wszystko działało bez problemu - tak więc wygląda na problem jakby systemowy
Próbowałem z telefonem na Android 9 oraz 4 - nie widać różnicy.

Na Windows działa bez problemu.

================================

Po podłączeniu telefonu pojawia się on na liście podłączonych urządzeń, ale go nie montuje.
hsurim@H61N-USB3:~$ lsusb
Bus 003 Device 004: ID 04e8:6860 Samsung Electronics Co., Ltd Galaxy series, misc. (MTP mode)
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 005: ID 1c4f:0002 SiGma Micro Keyboard TRACER Gamma Ivory
Bus 001 Device 004: ID 041e:3f19 Creative Technology, Ltd
Bus 001 Device 003: ID 09da:8090 A4Tech Co., Ltd. X-718BK Oscar Optical Gaming Mouse
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Kod: Zaznacz cały

hsurim@H61N-USB3:~$ su -
Hasło: 
root@H61N-USB3:~# dmesg
[    0.000000] Linux version 4.19.0-5-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.37-5+deb10u2 (2019-08-08)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-5-amd64 root=UUID=459d548c-0bd1-4af5-b932-3afd5bc08d77 ro quiet
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000daf3ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000daf40000-0x00000000daf82fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000daf83000-0x00000000dafbffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000dafc0000-0x00000000daffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f4000000-0x00000000f7ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. H61N-USB3/H61N-USB3, BIOS F8 05/15/2012
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3292.372 MHz processor
[    0.001807] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.001809] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.001812] last_pfn = 0x11fe00 max_arch_pfn = 0x400000000
[    0.001815] MTRR default type: uncachable
[    0.001816] MTRR fixed ranges enabled:
[    0.001817]   00000-9FFFF write-back
[    0.001817]   A0000-BFFFF uncachable
[    0.001818]   C0000-D0FFF write-protect
[    0.001819]   D1000-EFFFF uncachable
[    0.001819]   F0000-FFFFF write-through
[    0.001820] MTRR variable ranges enabled:
[    0.001821]   0 base 000000000 mask F00000000 write-back
[    0.001821]   1 base 0E0000000 mask FE0000000 uncachable
[    0.001822]   2 base 0DC000000 mask FFC000000 uncachable
[    0.001823]   3 base 0DB800000 mask FFF800000 uncachable
[    0.001823]   4 base 100000000 mask FE0000000 write-back
[    0.001824]   5 disabled
[    0.001824]   6 disabled
[    0.001824]   7 disabled
[    0.001825]   8 disabled
[    0.001825]   9 disabled
[    0.002358] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.002451] e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved
[    0.002455] last_pfn = 0xdaf40 max_arch_pfn = 0x400000000
[    0.006955] found SMP MP-table at [mem 0x000f57a0-0x000f57af]
[    0.019980] Base memory trampoline at [(____ptrval____)] 97000 size 24576
[    0.019981] reserving inaccessible SNB gfx pages
[    0.019985] BRK [0xb5201000, 0xb5201fff] PGTABLE
[    0.019986] BRK [0xb5202000, 0xb5202fff] PGTABLE
[    0.019987] BRK [0xb5203000, 0xb5203fff] PGTABLE
[    0.020010] BRK [0xb5204000, 0xb5204fff] PGTABLE
[    0.020012] BRK [0xb5205000, 0xb5205fff] PGTABLE
[    0.020052] BRK [0xb5206000, 0xb5206fff] PGTABLE
[    0.020076] BRK [0xb5207000, 0xb5207fff] PGTABLE
[    0.020158] RAMDISK: [mem 0x33ba5000-0x35dc9fff]
[    0.020164] ACPI: Early table checksum verification disabled
[    0.023871] ACPI: RSDP 0x00000000000F7390 000014 (v00 GBT   )
[    0.023874] ACPI: RSDT 0x00000000DAF83040 000050 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.023878] ACPI: FACP 0x00000000DAF83100 000074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.023882] ACPI: DSDT 0x00000000DAF831C0 0046E7 (v01 GBT    GBTUACPI 00001000 MSFT 04000000)
[    0.023884] ACPI: FACS 0x00000000DAF40000 000040
[    0.023886] ACPI: MSDM 0x00000000DAF87A00 000055 (v03 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.023888] ACPI: HPET 0x00000000DAF87AC0 000038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
[    0.023891] ACPI: MCFG 0x00000000DAF87B40 00003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.023893] ACPI: ASPT 0x00000000DAF87C00 000034 (v07 GBT    PerfTune 312E3042 UTBG 01010101)
[    0.023895] ACPI: SSPT 0x00000000DAF87C40 0022F4 (v01 GBT    SsptHead 312E3042 UTBG 01010101)
[    0.023897] ACPI: MATS 0x00000000DAF89F40 000034 (v01 GBT             00000000      00000000)
[    0.023900] ACPI: TAMG 0x00000000DAF89FA0 00054A (v01 GBT    GBT   B0 5455312E BG?? 53450101)
[    0.023902] ACPI: APIC 0x00000000DAF87900 0000BC (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.023904] ACPI: SSDT 0x00000000DAF8A500 001EC8 (v01 INTEL  PPM RCM  80000001 INTL 20061109)
[    0.023907] ACPI: MATS 0x00000000DAF8C400 0095D0 (v01        MATS RCM 80000001 INTL 20061109)
[    0.023914] ACPI: Local APIC address 0xfee00000
[    0.023979] No NUMA configuration found
[    0.023979] Faking a node at [mem 0x0000000000000000-0x000000011fdfffff]
[    0.023982] NODE_DATA(0) allocated [mem 0x11fdf9000-0x11fdfdfff]
[    0.024000] Zone ranges:
[    0.024001]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.024002]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.024003]   Normal   [mem 0x0000000100000000-0x000000011fdfffff]
[    0.024004]   Device   empty
[    0.024004] Movable zone start for each node
[    0.024005] Early memory node ranges
[    0.024005]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.024006]   node   0: [mem 0x0000000000100000-0x00000000daf3ffff]
[    0.024006]   node   0: [mem 0x0000000100000000-0x000000011fdfffff]
[    0.024009] Reserved but unavailable: 100 pages
[    0.024010] Initmem setup node 0 [mem 0x0000000000001000-0x000000011fdfffff]
[    0.024011] On node 0 totalpages: 1027292
[    0.024012]   DMA zone: 64 pages used for memmap
[    0.024012]   DMA zone: 156 pages reserved
[    0.024013]   DMA zone: 3996 pages, LIFO batch:0
[    0.024094]   DMA32 zone: 13949 pages used for memmap
[    0.024095]   DMA32 zone: 892736 pages, LIFO batch:63
[    0.042586]   Normal zone: 2040 pages used for memmap
[    0.042587]   Normal zone: 130560 pages, LIFO batch:31
[    0.045159] Reserving Intel graphics memory at [mem 0xdba00000-0xdf9fffff]
[    0.045310] ACPI: PM-Timer IO Port: 0x408
[    0.045312] ACPI: Local APIC address 0xfee00000
[    0.045318] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.045318] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.045319] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.045319] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[    0.045319] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[    0.045320] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[    0.045320] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[    0.045321] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[    0.045331] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.045332] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.045334] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.045335] ACPI: IRQ0 used by override.
[    0.045335] ACPI: IRQ9 used by override.
[    0.045337] Using ACPI (MADT) for SMP configuration information
[    0.045338] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.045342] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.045352] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.045353] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[    0.045354] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.045354] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.045355] PM: Registered nosave memory: [mem 0xdaf40000-0xdaf82fff]
[    0.045356] PM: Registered nosave memory: [mem 0xdaf83000-0xdafbffff]
[    0.045356] PM: Registered nosave memory: [mem 0xdafc0000-0xdaffffff]
[    0.045356] PM: Registered nosave memory: [mem 0xdb000000-0xdb9fffff]
[    0.045357] PM: Registered nosave memory: [mem 0xdba00000-0xdf9fffff]
[    0.045357] PM: Registered nosave memory: [mem 0xdfa00000-0xf3ffffff]
[    0.045358] PM: Registered nosave memory: [mem 0xf4000000-0xf7ffffff]
[    0.045358] PM: Registered nosave memory: [mem 0xf8000000-0xfebfffff]
[    0.045358] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[    0.045360] [mem 0xdfa00000-0xf3ffffff] available for PCI devices
[    0.045361] Booting paravirtualized kernel on bare hardware
[    0.045363] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.129043] random: get_random_bytes called from start_kernel+0x93/0x52c with crng_init=0
[    0.129051] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.129234] percpu: Embedded 44 pages/cpu s143256 r8192 d28776 u262144
[    0.129240] pcpu-alloc: s143256 r8192 d28776 u262144 alloc=1*2097152
[    0.129241] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.129257] Built 1 zonelists, mobility grouping on.  Total pages: 1011083
[    0.129258] Policy zone: Normal
[    0.129260] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-5-amd64 root=UUID=459d548c-0bd1-4af5-b932-3afd5bc08d77 ro quiet
[    0.132843] Calgary: detecting Calgary via BIOS EBDA area
[    0.132845] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.143416] Memory: 3915876K/4109168K available (10252K kernel code, 1242K rwdata, 3184K rodata, 1580K init, 2296K bss, 193292K reserved, 0K cma-reserved)
[    0.143495] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.143500] Kernel/User page tables isolation: enabled
[    0.143532] ftrace: allocating 31828 entries in 125 pages
[    0.153332] rcu: Hierarchical RCU implementation.
[    0.153334] rcu: 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.153334] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.155743] NR_IRQS: 33024, nr_irqs: 488, preallocated irqs: 16
[    0.157409] Console: colour VGA+ 80x25
[    0.157413] console [tty0] enabled
[    0.157425] ACPI: Core revision 20180810
[    0.157586] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.157594] hpet clockevent registered
[    0.157598] APIC: Switch to symmetric I/O mode setup
[    0.157987] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.177598] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2f75263f196, max_idle_ns: 440795244155 ns
[    0.177609] Calibrating delay loop (skipped), value calculated using timer frequency.. 6584.74 BogoMIPS (lpj=13169488)
[    0.177611] pid_max: default: 32768 minimum: 301
[    0.177632] Security Framework initialized
[    0.177633] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.177647] AppArmor: AppArmor initialized
[    0.178139] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.178433] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.178454] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.178464] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.178638] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.178638] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.178642] mce: CPU supports 7 MCE banks
[    0.178649] CPU0: Thermal monitoring enabled (TM1)
[    0.178655] process: using mwait in idle threads
[    0.178657] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.178658] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.178659] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.178660] Spectre V2 : Mitigation: Full generic retpoline
[    0.178660] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.178661] Speculative Store Bypass: Vulnerable
[    0.178687] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.178809] Freeing SMP alternatives memory: 24K
[    0.181662] TSC deadline timer enabled
[    0.181664] smpboot: CPU0: Intel(R) Core(TM) i3-2120 CPU @ 3.30GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[    0.181741] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.181757] core: PEBS disabled due to CPU errata, please upgrade microcode
[    0.181758] ... version:                3
[    0.181759] ... bit width:              48
[    0.181759] ... generic registers:      4
[    0.181760] ... value mask:             0000ffffffffffff
[    0.181760] ... max period:             00007fffffffffff
[    0.181761] ... fixed-purpose events:   3
[    0.181761] ... event mask:             000000070000000f
[    0.181792] rcu: Hierarchical SRCU implementation.
[    0.182390] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.182445] smp: Bringing up secondary CPUs ...
[    0.182505] x86: Booting SMP configuration:
[    0.182506] .... node  #0, CPUs:      #1 #2
[    0.185719] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[    0.185719]  #3
[    0.187902] smp: Brought up 1 node, 4 CPUs
[    0.187902] smpboot: Max logical packages: 2
[    0.187902] smpboot: Total of 4 processors activated (26338.97 BogoMIPS)
[    0.189780] devtmpfs: initialized
[    0.189780] x86/mm: Memory block size: 128MB
[    0.189920] PM: Registering ACPI NVS region [mem 0xdaf40000-0xdaf82fff] (274432 bytes)
[    0.189920] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.189920] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.189920] pinctrl core: initialized pinctrl subsystem
[    0.189920] NET: Registered protocol family 16
[    0.189920] audit: initializing netlink subsys (disabled)
[    0.189920] audit: type=2000 audit(1566753689.032:1): state=initialized audit_enabled=0 res=1
[    0.189920] cpuidle: using governor ladder
[    0.189920] cpuidle: using governor menu
[    0.189920] ACPI: bus type PCI registered
[    0.189920] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.189920] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
[    0.189920] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
[    0.189920] pmd_set_huge: Cannot satisfy [mem 0xf4000000-0xf4200000] with a huge-page mapping due to MTRR override.
[    0.189920] PCI: Using configuration type 1 for base access
[    0.189920] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.189920] mtrr: your CPUs had inconsistent fixed MTRR settings
[    0.189920] mtrr: probably your BIOS does not setup all CPUs.
[    0.189920] mtrr: corrected configuration.
[    0.190167] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.190167] ACPI: Added _OSI(Module Device)
[    0.190167] ACPI: Added _OSI(Processor Device)
[    0.190167] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.190167] ACPI: Added _OSI(Processor Aggregator Device)
[    0.190167] ACPI: Added _OSI(Linux-Dell-Video)
[    0.190167] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.191169] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.195036] ACPI: Interpreter enabled
[    0.195048] ACPI: (supports S0 S3 S4 S5)
[    0.195048] ACPI: Using IOAPIC for interrupt routing
[    0.195062] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.195154] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.197544] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[    0.197548] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.197550] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.197694] PCI host bridge to bus 0000:00
[    0.197696] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.197697] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.197698] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.197699] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.197700] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.197700] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfebfffff window]
[    0.197702] pci_bus 0000:00: root bus resource [bus 00-3f]
[    0.197707] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[    0.197775] pci 0000:00:02.0: [8086:0102] type 00 class 0x030000
[    0.197783] pci 0000:00:02.0: reg 0x10: [mem 0xfb800000-0xfbbfffff 64bit]
[    0.197788] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.197791] pci 0000:00:02.0: reg 0x20: [io  0xff00-0xff3f]
[    0.197870] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.197892] pci 0000:00:16.0: reg 0x10: [mem 0xfbfff000-0xfbfff00f 64bit]
[    0.197959] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.198023] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.198043] pci 0000:00:1a.0: reg 0x10: [mem 0xfbffe000-0xfbffe3ff]
[    0.198120] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.198182] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.198201] pci 0000:00:1b.0: reg 0x10: [mem 0xfbff4000-0xfbff7fff 64bit]
[    0.198269] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.198328] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.198407] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.198476] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[    0.198555] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.198626] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.198646] pci 0000:00:1d.0: reg 0x10: [mem 0xfbffd000-0xfbffd3ff]
[    0.198724] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.198780] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.198878] pci 0000:00:1f.0: [8086:1c5c] type 00 class 0x060100
[    0.199029] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[    0.199045] pci 0000:00:1f.2: reg 0x10: [io  0xfe00-0xfe07]
[    0.199051] pci 0000:00:1f.2: reg 0x14: [io  0xfd00-0xfd03]
[    0.199057] pci 0000:00:1f.2: reg 0x18: [io  0xfc00-0xfc07]
[    0.199063] pci 0000:00:1f.2: reg 0x1c: [io  0xfb00-0xfb03]
[    0.199070] pci 0000:00:1f.2: reg 0x20: [io  0xfa00-0xfa1f]
[    0.199076] pci 0000:00:1f.2: reg 0x24: [mem 0xfbffc000-0xfbffc7ff]
[    0.199111] pci 0000:00:1f.2: PME# supported from D3hot
[    0.199164] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.199180] pci 0000:00:1f.3: reg 0x10: [mem 0xfbffb000-0xfbffb0ff 64bit]
[    0.199198] pci 0000:00:1f.3: reg 0x20: [io  0x0500-0x051f]
[    0.199311] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[    0.199344] pci 0000:01:00.0: reg 0x10: [io  0xee00-0xeeff]
[    0.199376] pci 0000:01:00.0: reg 0x18: [mem 0xfbdff000-0xfbdfffff 64bit pref]
[    0.199396] pci 0000:01:00.0: reg 0x20: [mem 0xfbdf8000-0xfbdfbfff 64bit pref]
[    0.199508] pci 0000:01:00.0: supports D1 D2
[    0.199508] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.199624] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.199627] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
[    0.199634] pci 0000:00:1c.0:   bridge window [mem 0xfbd00000-0xfbdfffff 64bit pref]
[    0.199683] pci 0000:02:00.0: [1b73:1009] type 00 class 0x0c0330
[    0.199718] pci 0000:02:00.0: reg 0x10: [mem 0xfbee0000-0xfbeeffff 64bit]
[    0.199736] pci 0000:02:00.0: reg 0x18: [mem 0xfbeff000-0xfbefffff 64bit]
[    0.199755] pci 0000:02:00.0: reg 0x20: [mem 0xfbefe000-0xfbefefff 64bit]
[    0.199841] pci 0000:02:00.0: supports D1
[    0.199842] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[    0.199930] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.199935] pci 0000:00:1c.1:   bridge window [mem 0xfbe00000-0xfbefffff]
[    0.199954] pci_bus 0000:03: extended config space not accessible
[    0.199998] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
[    0.200006] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.200007] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.200007] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.200008] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[    0.200009] pci 0000:00:1e.0:   bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
[    0.200010] pci 0000:00:1e.0:   bridge window [mem 0xdfa00000-0xfebfffff window] (subtractive decode)
[    0.200279] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.200314] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.200348] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[    0.200382] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.200415] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.200449] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.200483] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[    0.200517] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[    0.200634] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.200634] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.200634] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.200634] vgaarb: loaded
[    0.200634] pps_core: LinuxPPS API ver. 1 registered
[    0.200634] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.200634] PTP clock support registered
[    0.200634] EDAC MC: Ver: 3.0.0
[    0.200634] PCI: Using ACPI for IRQ routing
[    0.200634] PCI: pci_cache_line_size set to 64 bytes
[    0.200634] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
[    0.200634] e820: reserve RAM buffer [mem 0xdaf40000-0xdbffffff]
[    0.200634] e820: reserve RAM buffer [mem 0x11fe00000-0x11fffffff]
[    0.201628] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.201632] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.202616] clocksource: Switched to clocksource tsc-early
[    0.208591] VFS: Disk quotas dquot_6.6.0
[    0.208591] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.208591] AppArmor: AppArmor Filesystem Enabled
[    0.208591] pnp: PnP ACPI init
[    0.208591] system 00:00: [io  0x04d0-0x04d1] has been reserved
[    0.208591] system 00:00: [io  0x0290-0x029f] has been reserved
[    0.208591] system 00:00: [io  0x0800-0x0805] has been reserved
[    0.208591] system 00:00: [io  0x0290-0x0294] has been reserved
[    0.208591] system 00:00: [io  0x0880-0x088f] has been reserved
[    0.208591] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.208591] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.208591] system 00:02: [io  0x0400-0x04cf] has been reserved
[    0.208591] system 00:02: [io  0x04d2-0x04ff] has been reserved
[    0.208591] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.208591] system 00:03: [io  0x1000-0x107f] has been reserved
[    0.208591] system 00:03: [io  0x1080-0x10ff] has been reserved
[    0.208591] system 00:03: [io  0x1100-0x117f] has been reserved
[    0.208591] system 00:03: [io  0x1180-0x11ff] has been reserved
[    0.208591] system 00:03: Plug and Play ACPI device, IDs ICD0001 PNP0c02 (active)
[    0.208591] system 00:04: [io  0x0454-0x0457] has been reserved
[    0.208591] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.208591] system 00:05: [mem 0xf4000000-0xf7ffffff] has been reserved
[    0.208591] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.208591] system 00:06: [mem 0x000d0a00-0x000d3fff] has been reserved
[    0.208591] system 00:06: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.208591] system 00:06: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.208591] system 00:06: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.208591] system 00:06: [mem 0xdaf40000-0xdafbffff] could not be reserved
[    0.208591] system 00:06: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.208591] system 00:06: [mem 0x00100000-0xdaf3ffff] could not be reserved
[    0.208591] system 00:06: [mem 0xdafc0000-0xdaffffff] has been reserved
[    0.208591] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.208591] system 00:06: [mem 0xfed10000-0xfed1dfff] has been reserved
[    0.208591] system 00:06: [mem 0xfed20000-0xfed8ffff] could not be reserved
[    0.208591] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.208591] system 00:06: [mem 0xffb00000-0xffb7ffff] has been reserved
[    0.208591] system 00:06: [mem 0xfff00000-0xffffffff] has been reserved
[    0.208591] system 00:06: [mem 0x000e0000-0x000effff] has been reserved
[    0.208591] system 00:06: [mem 0x20000000-0x201fffff] could not be reserved
[    0.208591] system 00:06: [mem 0x40000000-0x400fffff] could not be reserved
[    0.208591] system 00:06: [mem 0xdb000000-0xdf9fffff] could not be reserved
[    0.208591] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.208591] pnp: PnP ACPI: found 7 devices
[    0.214958] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.214983] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.214985] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
[    0.214991] pci 0000:00:1c.0:   bridge window [mem 0xfbd00000-0xfbdfffff 64bit pref]
[    0.214996] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.215000] pci 0000:00:1c.1:   bridge window [mem 0xfbe00000-0xfbefffff]
[    0.215007] pci 0000:00:1e.0: PCI bridge to [bus 03]
[    0.215016] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.215017] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.215018] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.215018] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.215019] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff window]
[    0.215020] pci_bus 0000:00: resource 9 [mem 0xdfa00000-0xfebfffff window]
[    0.215021] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.215022] pci_bus 0000:01: resource 2 [mem 0xfbd00000-0xfbdfffff 64bit pref]
[    0.215023] pci_bus 0000:02: resource 1 [mem 0xfbe00000-0xfbefffff]
[    0.215024] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7 window]
[    0.215025] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff window]
[    0.215025] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.215026] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.215027] pci_bus 0000:03: resource 8 [mem 0xfed40000-0xfed44fff window]
[    0.215028] pci_bus 0000:03: resource 9 [mem 0xdfa00000-0xfebfffff window]
[    0.215079] NET: Registered protocol family 2
[    0.215210] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
[    0.215224] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.215272] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.215327] TCP: Hash tables configured (established 32768 bind 32768)
[    0.215355] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.215366] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.215409] NET: Registered protocol family 1
[    0.215413] NET: Registered protocol family 44
[    0.215429] pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling
[    0.215440] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.233722] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x6c1 took 17845 usecs
[    0.257716] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x6c1 took 23420 usecs
[    0.257835] PCI: CLS 4 bytes, default 64
[    0.257870] Unpacking initramfs...
[    0.702841] Freeing initrd memory: 34964K
[    0.702854] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.702855] software IO TLB: mapped [mem 0xd6f40000-0xdaf40000] (64MB)
[    0.703404] Initialise system trusted keyrings
[    0.703412] Key type blacklist registered
[    0.703451] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[    0.704345] zbud: loaded
[    0.704528] pstore: using deflate compression
[    0.851098] Key type asymmetric registered
[    0.851100] Asymmetric key parser 'x509' registered
[    0.851110] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.851136] io scheduler noop registered
[    0.851136] io scheduler deadline registered
[    0.851163] io scheduler cfq registered (default)
[    0.851164] io scheduler mq-deadline registered
[    0.851429] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.851438] intel_idle: MWAIT substates: 0x1120
[    0.851438] intel_idle: v0.4.1 model 0x2A
[    0.851553] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.851995] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.852275] Linux agpgart interface v0.103
[    0.852307] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    0.852307] AMD IOMMUv2 functionality not available on this system
[    0.852549] i8042: PNP: No PS/2 controller found.
[    0.852549] i8042: Probing ports directly.
[    0.886623] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
[    0.886623] i8042: If AUX port is really absent please use the 'i8042.noaux' option
[    1.141717] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.141890] mousedev: PS/2 mouse device common for all mice
[    1.141935] rtc_cmos 00:01: RTC can wake from S4
[    1.142111] rtc_cmos 00:01: registered as rtc0
[    1.142126] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.142135] intel_pstate: Intel P-state driver initializing
[    1.142491] ledtrig-cpu: registered to indicate activity on CPUs
[    1.142962] NET: Registered protocol family 10
[    1.152900] Segment Routing with IPv6
[    1.152931] mip6: Mobile IPv6
[    1.152934] NET: Registered protocol family 17
[    1.153023] mpls_gso: MPLS GSO support
[    1.153446] microcode: sig=0x206a7, pf=0x2, revision=0x25
[    1.153519] microcode: Microcode Update Driver: v2.2.
[    1.153533] sched_clock: Marking stable (1151825187, 1686133)->(1162521360, -9010040)
[    1.153814] registered taskstats version 1
[    1.153815] Loading compiled-in X.509 certificates
[    1.189637] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[    1.189653] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'
[    1.189668] zswap: loaded using pool lzo/zbud
[    1.189719] AppArmor: AppArmor sha1 policy hashing enabled
[    1.189980] rtc_cmos 00:01: setting system clock to 2019-08-25 17:21:30 UTC (1566753690)
[    1.191104] Freeing unused kernel image memory: 1580K
[    1.221642] Write protecting the kernel read-only data: 16384k
[    1.222418] Freeing unused kernel image memory: 2028K
[    1.222741] Freeing unused kernel image memory: 912K
[    1.235308] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.235310] x86/mm: Checking user space page tables
[    1.242301] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.242302] Run /init as init process
[    1.298228] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    1.298240] ACPI: Power Button [PWRB]
[    1.298317] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.298331] ACPI: Power Button [PWRF]
[    1.304899] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x000000000000042C-0x000000000000042D (\GP2C) (20180810/utaddress-213)
[    1.304905] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    1.304932] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    1.329474] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.331209] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.340893] libphy: r8169: probed
[    1.341331] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl, 50:e5:49:49:14:5f, XID 2c900800, IRQ 24
[    1.341333] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.342578] ACPI: bus type USB registered
[    1.342601] usbcore: registered new interface driver usbfs
[    1.342617] usbcore: registered new interface driver hub
[    1.342641] usbcore: registered new device driver usb
[    1.343402] r8169 0000:01:00.0 enp1s0: renamed from eth0
[    1.348416] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.348940] SCSI subsystem initialized
[    1.349743] ehci-pci: EHCI PCI platform driver
[    1.349874] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.349885] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.349897] ehci-pci 0000:00:1a.0: debug port 2
[    1.353815] ehci-pci 0000:00:1a.0: cache line size of 4 is not supported
[    1.353831] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfbffe000
[    1.366223] libata version 3.00 loaded.
[    1.369644] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.369683] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    1.369685] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.369686] usb usb1: Product: EHCI Host Controller
[    1.369686] usb usb1: Manufacturer: Linux 4.19.0-5-amd64 ehci_hcd
[    1.369687] usb usb1: SerialNumber: 0000:00:1a.0
[    1.369809] hub 1-0:1.0: USB hub found
[    1.369817] hub 1-0:1.0: 2 ports detected
[    1.369951] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    1.369957] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[    1.370055] xhci_hcd 0000:02:00.0: hcc params 0x200073a1 hci version 0x100 quirks 0x0000000000080010
[    1.370251] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    1.370252] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.370253] usb usb2: Product: xHCI Host Controller
[    1.370253] usb usb2: Manufacturer: Linux 4.19.0-5-amd64 xhci-hcd
[    1.370254] usb usb2: SerialNumber: 0000:02:00.0
[    1.370332] hub 2-0:1.0: USB hub found
[    1.370339] hub 2-0:1.0: 2 ports detected
[    1.370418] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.370426] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
[    1.370440] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    1.370443] ehci-pci 0000:00:1d.0: debug port 2
[    1.370443] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 4
[    1.370446] xhci_hcd 0000:02:00.0: Host supports USB 3.0  SuperSpeed
[    1.370468] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.370490] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[    1.370491] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.370492] usb usb4: Product: xHCI Host Controller
[    1.370493] usb usb4: Manufacturer: Linux 4.19.0-5-amd64 xhci-hcd
[    1.370494] usb usb4: SerialNumber: 0000:02:00.0
[    1.372201] ahci 0000:00:1f.2: version 3.0
[    1.372345] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.372409] hub 4-0:1.0: USB hub found
[    1.372420] hub 4-0:1.0: 2 ports detected
[    1.374354] ehci-pci 0000:00:1d.0: cache line size of 4 is not supported
[    1.374366] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbffd000
[    1.382434] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x23 impl SATA mode
[    1.382437] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems apst 
[    1.389631] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.389688] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    1.389690] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.389691] usb usb3: Product: EHCI Host Controller
[    1.389692] usb usb3: Manufacturer: Linux 4.19.0-5-amd64 ehci_hcd
[    1.389693] usb usb3: SerialNumber: 0000:00:1d.0
[    1.389847] hub 3-0:1.0: USB hub found
[    1.389857] hub 3-0:1.0: 2 ports detected
[    1.406206] scsi host0: ahci
[    1.406377] scsi host1: ahci
[    1.406476] scsi host2: ahci
[    1.406573] scsi host3: ahci
[    1.406669] scsi host4: ahci
[    1.406761] scsi host5: ahci
[    1.406822] ata1: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc100 irq 30
[    1.406824] ata2: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc180 irq 30
[    1.406825] ata3: DUMMY
[    1.406826] ata4: DUMMY
[    1.406827] ata5: DUMMY
[    1.406828] ata6: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc380 irq 30
[    1.437566] [drm] Replacing VGA console driver
[    1.437952] Console: switching to colour dummy device 80x25
[    1.438706] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.438706] [drm] Driver supports precise vblank timestamp query.
[    1.439220] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.563306] random: fast init done
[    1.597743] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0
[    1.702837] fbcon: inteldrmfb (fb0) is primary device
[    1.709671] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.725623] usb 3-1: new high-speed USB device number 2 using ehci-pci
[    1.729660] tsc: Refined TSC clocksource calibration: 3292.520 MHz
[    1.729671] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2f75b1eac7a, max_idle_ns: 440795210882 ns
[    1.729715] clocksource: Switched to clocksource tsc
[    1.778191] Console: switching to colour frame buffer device 240x67
[    1.801632] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    1.866120] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[    1.866123] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.866503] hub 1-1:1.0: USB hub found
[    1.866641] hub 1-1:1.0: 4 ports detected
[    1.881672] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.881971] ata1.00: ATA-8: PLEXTOR PX-128M5S, 1.05, max UDMA/133
[    1.881973] ata1.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    1.882060] usb 3-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[    1.882063] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.882378] hub 3-1:1.0: USB hub found
[    1.882388] ata1.00: configured for UDMA/133
[    1.882613] scsi 0:0:0:0: Direct-Access     ATA      PLEXTOR PX-128M5 1.05 PQ: 0 ANSI: 5
[    1.882822] hub 3-1:1.0: 6 ports detected
[    2.153663] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[    2.357670] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.361575] ata2.00: ATAPI: TSSTcorp CDDVDW SN-208BB, SB03, max UDMA/100
[    2.367878] ata2.00: configured for UDMA/100
[    2.385400] scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW SN-208BB  SB03 PQ: 0 ANSI: 5
[    2.418969] usb 1-1.1: New USB device found, idVendor=09da, idProduct=8090, bcdDevice= 6.06
[    2.418972] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.418974] usb 1-1.1: Product: USB Full Speed
[    2.418975] usb 1-1.1: Manufacturer: A4Tech
[    2.428964] hidraw: raw HID events driver (C) Jiri Kosina
[    2.436193] usbcore: registered new interface driver usbhid
[    2.436194] usbhid: USB HID core driver
[    2.437633] input: A4Tech USB Full Speed as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:09DA:8090.0001/input/input3
[    2.437739] hid-generic 0003:09DA:8090.0001: input,hidraw0: USB HID v1.11 Mouse [A4Tech USB Full Speed] on usb-0000:00:1a.0-1.1/input0
[    2.438108] input: A4Tech USB Full Speed Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:09DA:8090.0002/input/input4
[    2.497663] usb 1-1.2: new high-speed USB device number 4 using ehci-pci
[    2.497928] input: A4Tech USB Full Speed System Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:09DA:8090.0002/input/input5
[    2.498034] input: A4Tech USB Full Speed Consumer Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:09DA:8090.0002/input/input6
[    2.498090] input: A4Tech USB Full Speed as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:09DA:8090.0002/input/input7
[    2.498321] hid-generic 0003:09DA:8090.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [A4Tech USB Full Speed] on usb-0000:00:1a.0-1.1/input1
[    2.608490] usb 1-1.2: New USB device found, idVendor=041e, idProduct=3f19, bcdDevice= 1.00
[    2.608493] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.608495] usb 1-1.2: Product: E-MU 0204 | USB
[    2.608496] usb 1-1.2: Manufacturer: E-MU Systems, Inc.
[    2.608498] usb 1-1.2: SerialNumber: E-MU-2A-3F19-07DA0C1B-0E249-8740AT2A
[    2.689661] usb 1-1.4: new low-speed USB device number 5 using ehci-pci
[    2.736302] ata6: SATA link down (SStatus 0 SControl 300)
[    2.751737] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[    2.751744] sd 0:0:0:0: [sda] Write Protect is off
[    2.751746] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.751754] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.754585]  sda: sda1 sda2 sda3 sda4 < sda5 >
[    2.754893] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.794843] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.794845] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.795031] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.803500] usb 1-1.4: New USB device found, idVendor=1c4f, idProduct=0002, bcdDevice= 1.10
[    2.803502] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.803503] usb 1-1.4: Product: USB Keykoard
[    2.803504] usb 1-1.4: Manufacturer: SIGMACH1P
[    2.806445] input: SIGMACH1P USB Keykoard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:1C4F:0002.0003/input/input8
[    2.865759] hid-generic 0003:1C4F:0002.0003: input,hidraw2: USB HID v1.10 Keyboard [SIGMACH1P USB Keykoard] on usb-0000:00:1a.0-1.4/input0
[    2.868288] input: SIGMACH1P USB Keykoard Consumer Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:1C4F:0002.0004/input/input9
[    2.925658] input: SIGMACH1P USB Keykoard System Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:1C4F:0002.0004/input/input10
[    2.925690] hid-generic 0003:1C4F:0002.0004: input,hidraw3: USB HID v1.10 Device [SIGMACH1P USB Keykoard] on usb-0000:00:1a.0-1.4/input1
[    3.121146] cryptd: max_cpu_qlen set to 1000
[    3.250033] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    3.387138] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
[    3.401899] systemd[1]: Inserted module 'autofs4'
[    3.421808] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    3.441784] systemd[1]: Detected architecture x86-64.
[    3.445305] systemd[1]: Set hostname to <H61N-USB3>.
[    3.560510] random: systemd: uninitialized urandom read (16 bytes read)
[    3.561832] random: systemd: uninitialized urandom read (16 bytes read)
[    3.561934] systemd[1]: Listening on Journal Audit Socket.
[    3.562001] random: systemd: uninitialized urandom read (16 bytes read)
[    3.562095] systemd[1]: Listening on Journal Socket (/dev/log).
[    3.562151] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    3.563260] systemd[1]: Created slice system-getty.slice.
[    3.563361] systemd[1]: Listening on Syslog Socket.
[    3.563450] systemd[1]: Listening on udev Kernel Socket.
[    3.563537] systemd[1]: Listening on fsck to fsckd communication Socket.
[    3.586272] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[    3.602853] lp: driver loaded but no devices found
[    3.607233] ppdev: user-space parallel port driver
[    3.701441] systemd-journald[223]: Received request to flush runtime journal from PID 1
[    3.767114] iTCO_vendor_support: vendor-support=0
[    3.776645] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    3.776683] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[    3.794440] input: PC Speaker as /devices/platform/pcspkr/input/input11
[    3.819882] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.819965] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    3.822203] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[    3.822205] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[    3.822206] RAPL PMU: hw unit of domain package 2^-16 Joules
[    3.822206] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[    3.842447] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    3.876732] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC889: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    3.876735] snd_hda_codec_realtek hdaudioC0D2:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    3.876744] snd_hda_codec_realtek hdaudioC0D2:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    3.876745] snd_hda_codec_realtek hdaudioC0D2:    mono: mono_out=0x0
[    3.876746] snd_hda_codec_realtek hdaudioC0D2:    dig-out=0x11/0x1e
[    3.876748] snd_hda_codec_realtek hdaudioC0D2:    inputs:
[    3.876750] snd_hda_codec_realtek hdaudioC0D2:      Rear Mic=0x18
[    3.876752] snd_hda_codec_realtek hdaudioC0D2:      Front Mic=0x19
[    3.876753] snd_hda_codec_realtek hdaudioC0D2:      Line=0x1a
[    3.876754] snd_hda_codec_realtek hdaudioC0D2:      CD=0x1c
[    3.890644] usbcore: registered new interface driver snd-usb-audio
[    3.930458] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    3.931351] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    3.931404] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[    3.931456] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[    3.931509] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[    3.931562] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[    3.931619] snd_hda_intel 0000:00:1b.0: device 1458:a002 is on the power_save blacklist, forcing power_save to 0
[    4.037794] intel_rapl: Found RAPL domain package
[    4.037795] intel_rapl: Found RAPL domain core
[    4.037796] intel_rapl: Found RAPL domain uncore
[    4.157160] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    4.195888] audit: type=1400 audit(1566746493.501:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=426 comm="apparmor_parser"
[    4.195893] audit: type=1400 audit(1566746493.501:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=426 comm="apparmor_parser"
[    4.197101] audit: type=1400 audit(1566746493.501:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=427 comm="apparmor_parser"
[    4.197294] audit: type=1400 audit(1566746493.501:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=425 comm="apparmor_parser"
[    4.197298] audit: type=1400 audit(1566746493.501:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=425 comm="apparmor_parser"
[    4.197300] audit: type=1400 audit(1566746493.501:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=425 comm="apparmor_parser"
[    4.197776] audit: type=1400 audit(1566746493.505:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=429 comm="apparmor_parser"
[    4.199756] audit: type=1400 audit(1566746493.505:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=428 comm="apparmor_parser"
[    4.199760] audit: type=1400 audit(1566746493.505:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=428 comm="apparmor_parser"
[    4.746563] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[    4.746941] r8169 0000:01:00.0: firmware: failed to load rtl_nic/rtl8168e-3.fw (-2)
[    4.746944] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
[    4.746947] r8169 0000:01:00.0: Direct firmware load for rtl_nic/rtl8168e-3.fw failed with error -2
[    4.746952] r8169 0000:01:00.0 enp1s0: unable to load firmware patch rtl_nic/rtl8168e-3.fw (-2)
[    4.747172] RTL8211E Gigabit Ethernet r8169-100:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-100:00, irq=IGNORE)
[    4.852136] r8169 0000:01:00.0 enp1s0: Link is Down
[    4.852205] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[    7.103623] r8169 0000:01:00.0 enp1s0: Link is Up - 1Gbps/Full - flow control rx/tx
[    7.103633] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
[    7.653191] random: crng init done
[    7.653195] random: 7 urandom warning(s) missed due to ratelimiting
[   13.202696] retire_capture_urb: 7 callbacks suppressed
[ 1812.185066] usb 3-1.1: new high-speed USB device number 3 using ehci-pci
[ 1812.295176] usb 3-1.1: New USB device found, idVendor=04e8, idProduct=6860, bcdDevice= 4.00
[ 1812.295180] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1812.295181] usb 3-1.1: Product: SAMSUNG_Android
[ 1812.295183] usb 3-1.1: Manufacturer: SAMSUNG
[ 1812.295184] usb 3-1.1: SerialNumber: 42004dfa9bcdc459
[ 2330.448467] usb 3-1.1: USB disconnect, device number 3
[ 2339.640096] usb 3-1.2: new high-speed USB device number 4 using ehci-pci
[ 2339.749754] usb 3-1.2: New USB device found, idVendor=04e8, idProduct=6860, bcdDevice= 4.00
[ 2339.749757] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2339.749759] usb 3-1.2: Product: SAMSUNG_Android
[ 2339.749761] usb 3-1.2: Manufacturer: SAMSUNG
[ 2339.749762] usb 3-1.2: SerialNumber: 42004dfa9bcdc459
Szukając rozwiązania, instalowałem jakieś zalecane dodatki "android", ale niczego to nie zmieniło
Jest jeszcze coś takiego, jak pakiet Google SDK dla platformy Android 9. Czy może on coś pomóc ?
Ostatnio zmieniony 27 sierpnia 2019, 19:59 przez hsurim, łącznie zmieniany 1 raz.

Awatar użytkownika
dedito
Moderator
Posty: 2974
Rejestracja: 18 listopada 2013, 21:07
Lokalizacja: Gliwice

Re: Debian10 nie montuje telefonu z Androidem

Post autor: dedito » 25 sierpnia 2019, 23:19

Paczka jmtpfs zainstalowana?
https://wiki.debian.org/mtp

Awatar użytkownika
LordRuthwen
Moderator
Posty: 2080
Rejestracja: 18 września 2009, 21:45
Lokalizacja: klikash?

Re: Debian10 nie montuje telefonu z Androidem

Post autor: LordRuthwen » 26 sierpnia 2019, 07:09

a w dmesgu coś jest?

Awatar użytkownika
dedito
Moderator
Posty: 2974
Rejestracja: 18 listopada 2013, 21:07
Lokalizacja: Gliwice

Re: Debian10 nie montuje telefonu z Androidem

Post autor: dedito » 26 sierpnia 2019, 08:58

Lordzie, pod koniec masz log z wykrycia sprzętu.
[ 1812.185066] usb 3-1.1: new high-speed USB device number 3 using ehci-pci
[ 1812.295176] usb 3-1.1: New USB device found, idVendor=04e8, idProduct=6860, bcdDevice= 4.00
[ 1812.295180] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1812.295181] usb 3-1.1: Product: SAMSUNG_Android
[ 1812.295183] usb 3-1.1: Manufacturer: SAMSUNG
[ 1812.295184] usb 3-1.1: SerialNumber: 42004dfa9bcdc459
[ 2330.448467] usb 3-1.1: USB disconnect, device number 3
[ 2339.640096] usb 3-1.2: new high-speed USB device number 4 using ehci-pci
[ 2339.749754] usb 3-1.2: New USB device found, idVendor=04e8, idProduct=6860, bcdDevice= 4.00
[ 2339.749757] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2339.749759] usb 3-1.2: Product: SAMSUNG_Android
[ 2339.749761] usb 3-1.2: Manufacturer: SAMSUNG
[ 2339.749762] usb 3-1.2: SerialNumber: 42004dfa9bcdc459

Awatar użytkownika
Yampress
Administrator
Posty: 6159
Rejestracja: 09 sierpnia 2007, 21:41
Lokalizacja: PL

Re: Debian10 nie montuje telefonu z Androidem

Post autor: Yampress » 26 sierpnia 2019, 15:46

zanistaluj pakiet gmtp

Awatar użytkownika
hsurim
Beginner
Posty: 270
Rejestracja: 05 maja 2014, 17:15
Lokalizacja: Warszawa (mazowieckie)

Re: Debian10 nie montuje telefonu z Androidem

Post autor: hsurim » 26 sierpnia 2019, 16:02

Dzięki za zainteresowanie ! :)

Po zainstalowaniu jmtpfs , bez zmiany.
Po doinstalowaniu gmtp, również nic się nie dzieje.

Od samego początku występowania tego problemu, co jakiś czas pojawia się w telefonie komunikat o braku połączenia z sugestią o ponownym podłączeniu USB - ale niczego to nie poprawia
Kabelki co mam raczej sprawne, bo w Windows wykrywa i montuje.

Czy mogę przyjąć, że u Was działa prawidłowo ?

Awatar użytkownika
Yampress
Administrator
Posty: 6159
Rejestracja: 09 sierpnia 2007, 21:41
Lokalizacja: PL

Re: Debian10 nie montuje telefonu z Androidem

Post autor: Yampress » 26 sierpnia 2019, 16:19

a w telefonie zmieniłeś tryb ładowania w tryb przesyłania plików?

Awatar użytkownika
hsurim
Beginner
Posty: 270
Rejestracja: 05 maja 2014, 17:15
Lokalizacja: Warszawa (mazowieckie)

Re: Debian10 nie montuje telefonu z Androidem

Post autor: hsurim » 26 sierpnia 2019, 16:35

Jest 5 opcji i mam włączone 'przesyłanie plików' - w Win działa prawidłowo

Przed chwilą podłączyłem Xiaomi Mi4 - też go nie montuje

Awatar użytkownika
Yampress
Administrator
Posty: 6159
Rejestracja: 09 sierpnia 2007, 21:41
Lokalizacja: PL

Re: Debian10 nie montuje telefonu z Androidem

Post autor: Yampress » 26 sierpnia 2019, 16:39

a kabel jest sprawny? dziala pod windowsem?

Awatar użytkownika
hsurim
Beginner
Posty: 270
Rejestracja: 05 maja 2014, 17:15
Lokalizacja: Warszawa (mazowieckie)

Re: Debian10 nie montuje telefonu z Androidem

Post autor: hsurim » 26 sierpnia 2019, 16:46

Mam kilka kabelków i wszystkie pod WIn działają
Mimo tego - dla pewności - jednak zakupię jeszcze z jeden

Zablokowany