polecenie sesnors z lm-sensors pokazuje bzduty. Wszystko w jądrze (2.6.18.1) wkompilowane jak w instrukcji.
sensors:
~# sensors
w83627hf-isa-0290
Adapter: ISA adapter
VCore 1: +0.06 V (min = +1.38 V, max = +1.54 V) ALARM
VCore 2: +0.06 V (min = +1.38 V, max = +1.54 V) ALARM
+3.3V: +0.06 V (min = +3.14 V, max = +3.46 V) ALARM
+5V: +5.05 V (min = +4.73 V, max = +5.24 V)
+12V: +0.24 V (min = +10.82 V, max = +13.19 V) ALARM
-12V: -14.58 V (min = -13.18 V, max = -10.88 V) ALARM
-5V: -7.51 V (min = -5.25 V, max = -4.75 V) ALARM
V5SB: +5.48 V (min = +4.73 V, max = +5.24 V) ALARM
VBat: +2.06 V (min = +2.40 V, max = +3.60 V) ALARM
fan1: 0 RPM (min = 712 RPM, div = 8) ALARM
fan2: 0 RPM (min = 712 RPM, div = 8) ALARM
fan3: 0 RPM (min = 892 RPM, div = 8) ALARM
temp1: +126°C (high = -1°C, hyst = -1°C) sensor = thermistor ALARM
temp2: +126.0°C (high = +80°C, hyst = +75°C) sensor = thermistor ALARM
temp3: +126.0°C (high = +80°C, hyst = +75°C) sensor = thermistor ALARM
vid: +1.463 V (VRM Version 10.0)
alarms: Chassis intrusion detection ALARM
beep_enable:
Sound alarm enabled
w83627hf-i2c-0-2d
Adapter: SMBus I801 adapter at 1100
VCore 1: +0.06 V (min = +1.38 V, max = +1.54 V) ALARM
VCore 2: +0.06 V (min = +1.38 V, max = +1.54 V) ALARM
+3.3V: +0.06 V (min = +3.14 V, max = +3.46 V) ALARM
+5V: +5.05 V (min = +4.73 V, max = +5.24 V)
+12V: +0.24 V (min = +10.82 V, max = +13.19 V) ALARM
-12V: -14.58 V (min = -13.18 V, max = -10.88 V) ALARM
-5V: -7.51 V (min = -5.25 V, max = -4.75 V) ALARM
V5SB: +5.48 V (min = +4.73 V, max = +5.24 V) ALARM
VBat: +2.06 V (min = +2.40 V, max = +3.60 V) ALARM
fan1: 0 RPM (min = 712 RPM, div = 8) ALARM
fan2: 0 RPM (min = 712 RPM, div = 8) ALARM
fan3: 0 RPM (min = 892 RPM, div = 8) ALARM
temp1: +126°C (high = -1°C, hyst = -1°C) sensor = thermistor ALARM
temp2: +126.0°C (high = +80°C, hyst = +75°C) sensor = thermistor ALARM
temp3: +126.0°C (high = +80°C, hyst = +75°C) sensor = thermistor ALARM
vid: +1.463 V (VRM Version 10.0)
alarms: Chassis intrusion detection ALARM
beep_enable:
Sound alarm enabled
lspci:
:~# lspci
0000:00:00.0 Host bridge: Intel Corporation E7230/3000/3010 Memory Controller Hub (rev 81)
0000:00:01.0 PCI bridge: Intel Corporation E7230/3000/3010 PCI Express Root Port (rev 81)
0000:00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
0000:00:1c.4 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 5 (rev 01)
0000:00:1c.5 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 6 (rev 01)
0000:00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01)
0000:00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01)
0000:00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01)
0000:00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01)
0000:00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
0000:00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
0000:00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
0000:00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
0000:00:1f.2 RAID bus controller: Intel Corporation 82801GR/GH (ICH7 Family) Serial ATA Storage Controller RAID (rev 01)
0000:00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
0000:02:00.0 PCI bridge: Intel Corporation 6702PXH PCI Express-to-PCI Bridge A (rev 09)
0000:02:00.1 PIC: Intel Corporation 6700/6702PXH I/OxAPIC Interrupt Controller A (rev 09)
0000:04:00.0 Ethernet controller: Intel Corporation 82573E Gigabit Ethernet Controller (Copper) (rev 03)
0000:04:00.3 Serial controller: Intel Corporation Active Management Technology - SOL (rev 03)
0000:04:00.4 0c07: Intel Corporation 82573E KCS (Active Management) (rev 03)
0000:05:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller
0000:0a:00.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
0000:0a:05.0 Communication controller: PLX Technology, Inc. PCI <-> IOBus Bridge (rev 02)
Czylu czujniki są:
sensors-detects:
To continue, we need module `i2c-dev' to be loaded.
If it is built-in into your kernel, you can safely skip this.
i2c-dev is already loaded.
We are now going to do the adapter probings. Some adapters may hang halfway
through; we can't really help that. Also, some chips will be double detected;
we choose the one with the highest confidence value in that case.
If you found that the adapter hung after probing a certain address, you can
specify that address to remain unprobed. That often
includes address 0x69 (clock chip).
Next adapter: SMBus I801 adapter at 1100
Do you want to scan it? (YES/no/selectively): yes
Client found at address 0x08
Client found at address 0x0c
Client at address 0x2d can not be probed - unload all client drivers first!
Client found at address 0x2f
Probing for `National Semiconductor LM78'... Failed!
Probing for `National Semiconductor LM78-J'... Failed!
Probing for `National Semiconductor LM79'... Failed!
Probing for `National Semiconductor LM80'... Failed!
Probing for `Winbond W83781D'... Failed!
Probing for `Winbond W83782D'... Failed!
Probing for `Winbond W83791D'... Failed!
Probing for `Winbond W83792D'... Success!
(confidence 7, driver `to-be-written')
Probing for `Winbond W83791SD'... Failed!
Probing for `Winbond W83627HF'... Failed!
Probing for `Winbond W83627EHF'... Failed!
Probing for `Asus AS99127F (rev.1)'... Failed!
Probing for `Asus AS99127F (rev.2)'... Failed!
Probing for `Asus ASB100 Bach'... Failed!
Probing for `Analog Devices ADM9240'... Failed!
Probing for `Dallas Semiconductor DS1780'... Failed!
Probing for `National Semiconductor LM81'... Failed!
Probing for `Analog Devices ADM1029'... Failed!
Probing for `ITE IT8712F'... Failed!
Probing for `ITE IT8705F / SiS 950'... Failed!
Client found at address 0x30
Client found at address 0x32
Client found at address 0x44
Probing for `Maxim MAX6633/MAX6634/MAX6635'... Failed!
Client at address 0x48 can not be probed - unload all client drivers first!
Client at address 0x49 can not be probed - unload all client drivers first!
Client found at address 0x50
Probing for `SPD EEPROM'... Success!
(confidence 8, driver `eeprom')
Probing for `DDC monitor'... Failed!
Probing for `Maxim MAX6900'... Failed!
Client found at address 0x52
Probing for `SPD EEPROM'... Success!
(confidence 8, driver `eeprom')
Client found at address 0x60
Client found at address 0x61
Probing for `SMBus 2.0 ARP-Capable Device'... Success!
(confidence 1, driver `smbus-arp')
Client found at address 0x62
Client found at address 0x63
Client found at address 0x64
Client found at address 0x69
Some chips are also accessible through the ISA bus. ISA probes are
typically a bit more dangerous, as we have to write to I/O ports to do
this. This is usually safe though.
Do you want to scan the ISA bus? (YES/no): y
Probing for `National Semiconductor LM78'
Trying address 0x0290... Failed!
Probing for `National Semiconductor LM78-J'
Trying address 0x0290... Failed!
Probing for `National Semiconductor LM79'
Trying address 0x0290... Failed!
Probing for `Winbond W83781D'
Trying address 0x0290... Failed!
Probing for `Winbond W83782D'
Trying address 0x0290... Failed!
Probing for `Winbond W83627HF'
Trying address 0x0290... Success!
(confidence 8, driver `w83781d')
Probing for `Winbond W83627EHF'
Trying address 0x0290... Failed!
Probing for `Winbond W83697HF'
Trying address 0x0290... Failed!
Probing for `Silicon Integrated Systems SIS5595'
Trying general detect... Failed!
Probing for `VIA Technologies VT82C686 Integrated Sensors'
Trying general detect... Failed!
Probing for `VIA Technologies VT8231 Integrated Sensors'
Trying general detect... Failed!
Probing for `ITE IT8712F'
Trying address 0x0290... Failed!
Probing for `ITE IT8705F / SiS 950'
Trying address 0x0290... Failed!
Probing for `IPMI BMC KCS'
Trying address 0x0ca0... Failed!
Probing for `IPMI BMC SMIC'
Trying address 0x0ca8... Failed!
Some Super I/O chips may also contain sensors. Super I/O probes are
typically a bit more dangerous, as we have to write to I/O ports to do
this. This is usually safe though.
Do you want to scan for Super I/O sensors? (YES/no): y
Probing for `ITE 8702F Super IO Sensors'
Failed! (0x5241)
Probing for `ITE 8705F Super IO Sensors'
Failed! (0x5241)
Probing for `ITE 8712F Super IO Sensors'
Failed! (0x5241)
Probing for `Nat. Semi. PC87351 Super IO Fan Sensors'
Failed! (0x52)
Probing for `Nat. Semi. PC87360 Super IO Fan Sensors'
Failed! (0x52)
Probing for `Nat. Semi. PC87363 Super IO Fan Sensors'
Failed! (0x52)
Probing for `Nat. Semi. PC87364 Super IO Fan Sensors'
Failed! (0x52)
Probing for `Nat. Semi. PC87365 Super IO Fan Sensors'
Failed! (0x52)
Probing for `Nat. Semi. PC87365 Super IO Voltage Sensors'
Failed! (0x52)
Probing for `Nat. Semi. PC87365 Super IO Thermal Sensors'
Failed! (0x52)
Probing for `Nat. Semi. PC87366 Super IO Fan Sensors'
Failed! (0x52)
Probing for `Nat. Semi. PC87366 Super IO Voltage Sensors'
Failed! (0x52)
Probing for `Nat. Semi. PC87366 Super IO Thermal Sensors'
Failed! (0x52)
Probing for `Nat. Semi. PC87372 Super IO Fan Sensors'
Failed! (0x52)
Probing for `Nat. Semi. PC87373 Super IO Fan Sensors'
Failed! (0x52)
Probing for `Nat. Semi. PC87591 Super IO'
Failed! (0x52)
Probing for `Nat. Semi. PC87371 Super IO'
Failed! (0x52)
Probing for `Nat. Semi. PC97371 Super IO'
Failed! (0x52)
Probing for `Nat. Semi. PC8739x Super IO'
Failed! (0x52)
Probing for `Nat. Semi. PC8741x Super IO'
Failed! (0x52)
Probing for `SMSC 47B27x Super IO Fan Sensors'
Failed! (0x52)
Probing for `SMSC 47M10x/13x Super IO Fan Sensors'
Failed! (0x52)
Probing for `SMSC 47M14x Super IO Fan Sensors'
Failed! (0x52)
Probing for `SMSC 47M15x/192 Super IO Fan Sensors'
Failed! (0x52)
Probing for `SMSC 47S42x Super IO Fan Sensors'
Failed! (0x52)
Probing for `SMSC 47S45x Super IO Fan Sensors'
Failed! (0x52)
Probing for `SMSC 47M172 Super IO'
Failed! (0x52)
Probing for `SMSC LPC47B397-NC Super IO'
Failed! (0x52)
Probing for `VT1211 Super IO Sensors'
Failed! (0x52)
Probing for `Winbond W83627HF Super IO Sensors'
Success... found at address 0x0295
Probing for `Winbond W83627THF Super IO Sensors'
Failed! (0x52)
Probing for `Winbond W83637HF Super IO Sensors'
Failed! (0x52)
Probing for `Winbond W83697HF Super IO Sensors'
Failed! (0x52)
Probing for `Winbond W83697SF/UF Super IO PWM'
Failed! (0x52)
Probing for `Winbond W83L517D Super IO'
Failed! (0x52)
Probing for `Winbond W83627EHF Super IO Sensors'
Failed! (0x5241)
Do you want to scan for secondary Super I/O sensors? (YES/no): y
Probing for `ITE 8702F Super IO Sensors'
Failed! (skipping family)
Probing for `Nat. Semi. PC87351 Super IO Fan Sensors'
Failed! (skipping family)
Probing for `SMSC 47B27x Super IO Fan Sensors'
Failed! (skipping family)
Probing for `VT1211 Super IO Sensors'
Failed! (skipping family)
Probing for `Winbond W83627EHF Super IO Sensors'
Failed! (skipping family)
Now follows a summary of the probes I have just done.
Just press ENTER to continue:
Driver `to-be-written' (should be inserted):
Detects correctly:
* Bus `SMBus I801 adapter at 1100'
Busdriver `i2c-i801', I2C address 0x2f
Chip `Winbond W83792D' (confidence: 7)
Driver `eeprom' (should be inserted):
Detects correctly:
* Bus `SMBus I801 adapter at 1100'
Busdriver `i2c-i801', I2C address 0x50
Chip `SPD EEPROM' (confidence: 8)
* Bus `SMBus I801 adapter at 1100'
Busdriver `i2c-i801', I2C address 0x52
Chip `SPD EEPROM' (confidence: 8)
Driver `smbus-arp' (should be inserted):
Detects correctly:
* Bus `SMBus I801 adapter at 1100'
Busdriver `i2c-i801', I2C address 0x61
Chip `SMBus 2.0 ARP-Capable Device' (confidence: 1)
Driver `w83781d' (should be inserted):
Detects correctly:
* ISA bus address 0x0290 (Busdriver `i2c-isa')
Chip `Winbond W83627HF' (confidence: 8)
Driver `w83627hf' (should be inserted):
Detects correctly:
* ISA bus address 0x0295 (Busdriver `i2c-isa')
Chip `Winbond W83627HF Super IO Sensors' (confidence: 9)
I will now generate the commands needed to load the I2C modules.
Sometimes, a chip is available both through the ISA bus and an I2C bus.
ISA bus access is faster, but you need to load an additional driver module
for it. If you have the choice, do you want to use the ISA bus or the
I2C/SMBus (ISA/smbus)? smbus
To make the sensors modules behave correctly, add these lines to
/etc/modules:
#----cut here----
# I2C adapter drivers
i2c-i801
i2c-isa
# I2C chip drivers
# no driver for Winbond W83792D yet
eeprom
# Warning: the required module smbus-arp is not currently installed on your system.
# For status of 2.6 kernel ports see http://secure.netroedge.com/~lm78/supported.html
# If driver is built-in to the kernel, or unavailable, comment out the following line.
smbus-arp
w83781d
w83627hf
#----cut here----
Do you want to add these lines to /etc/modules automatically? (yes/NO)n
Jak wybrać odpowiedni moduł? kontroler?
Gdzie może być błąd?
Z góry dzięki za info.