Instalacja sterowników NVidia GeForce 520MX

[sullivan]

Witam wszystkich bardzo serdecznie.
Po bardzo długim czasie postanowiłem powrócić do Debiana w wersji testowej z nieco "wyparowaną wiedzą", bo nie używałem Linuksa z rok. Problemy niestety pojawiły się już na starcie i wierzcie mi, że walczę z bublem od 4 dni i nie zakładałbym nowego tematu gdybym nie był zdesperowany.

Problem dotyczy instalacji sterowników do karty graficznej NVidia GeForce 520MX. Próbowałem dosłownie wszystkiego. Czytałem poradnik, który jest na tym forum, a mianowicie ten:
http://damlab.pl/howto/nvidia_drivers/

Postąpiłem dokładnie według wskazówek. Za pierwszym razem instalator krzyczał, że mam zainstalowany nowszy kompilator tj. gcc-4.7, a do poprawnej instalacji wymagany jest gcc-4.6. Zignorowałem ten błąd kontynuując instalację. Sterownik się zainstalował lecz zabrakło akceleracji 3D, nie można było włączyć przezroczystych okien. W poradniku zawarta jest informacja, że w takim przypadku należy zainstalować wymagany kompilator. Tak też zrobiłem lecz niestety problem dalej istniał. W związku z tym usunąłem sterownik i znalazłem poradnik Velmafii (ma On niemal identyczny laptop jak ja). Pomyślałem, że na bank zadziała. Przeczytałem ten oto temat:
http://velmafia.pl/debian-i-samsung-np300e5a/
a następie ten:
http://wiki.debian.org/Bumblebee

Odinstalowałem całkowicie sterownik, który instalowałem wcześniej jak i wszystko co było związane z nvidią tak aby system korzystał z fabrycznych sterowników (na tych o dziwo akceleracja 3D jest).

Kod: Zaznacz cały

daniel@debian:~$ glxgears
Running synchronized to the vertical refresh.  The framerate should beapproximately the same as the monitor refresh rate.
302 frames in 5.0 seconds = 60.263 FPS
300 frames in 5.0 seconds = 59.945 FPS
300 frames in 5.0 seconds = 59.945 FPS
300 frames in 5.0 seconds = 59.944 FPS
300 frames in 5.0 seconds = 59.945 FPS

Kod: Zaznacz cały

daniel@debian:~$ glxinfo | grep direct
direct rendering: Yes

Kod: Zaznacz cały

daniel@debian:~$ lspci -k
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)        Subsystem: Samsung Electronics Co Ltd Device c0b6
        Kernel driver in use: agpgart-intel
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
        Kernel driver in use: pcieport
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
        Subsystem: Samsung Electronics Co Ltd Device c0b6
        Kernel driver in use: i915
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
        Subsystem: Samsung Electronics Co Ltd Device c0b6
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
        Subsystem: Samsung Electronics Co Ltd Device c0b6
        Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04)
        Subsystem: Samsung Electronics Co Ltd Device c0b6
        Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4)
        Kernel driver in use: pcieport
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4)
        Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
        Subsystem: Samsung Electronics Co Ltd Device c0b6
        Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 04)
        Subsystem: Samsung Electronics Co Ltd Device c0b6
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04)
        Subsystem: Samsung Electronics Co Ltd Device c0b6
        Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04)
        Subsystem: Samsung Electronics Co Ltd Device c0b6
01:00.0 3D controller: NVIDIA Corporation GF119 [GeForce GT 520MX] (rev a1)
        Subsystem: Samsung Electronics Co Ltd Device c0b6
02:00.0 Network controller: Intel Corporation Centrino Wireless-N 130 (rev 34)
        Subsystem: Intel Corporation Centrino Wireless-N 130 BGN
        Kernel driver in use: iwlwifi
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
        Subsystem: Samsung Electronics Co Ltd Device c0b6
        Kernel driver in use: r8169

Podczas instalacji tych dwóch pierwszych dostałem informacje, że moduł, który instalator chce załadować nie jest kompatybilny z jądrem systemu i najszybciej można problem naprawić poprzez restart systemu po instalacji sterownika. Tak też zrobiłem. Nie jestem w stanie odnaleźć logu z tego ale nagłówki do jądra zainstalowały się poprawnie.

Kod: Zaznacz cały

daniel@debian:~$ uname -r3.2.0-4-amd64

Kod: Zaznacz cały

ii  linux-image-3.2.0-4-amd64             3.2.35-2                    amd64        Linux 3.2 for 64-bit PCs

Potem przeszedłem do instalacji Bumblebee, dokładnie według instrukcji z tej strony:
http://suwako.nomanga.net/
Niby wszystko poprawnie się zainstalowało, ale gdy wpisuję polecenie:

Kod: Zaznacz cały

optirun glxgears -info 

jest chwila namysłu po czym dostaję czarny ekran z różnymi dziwnymi napisami, z których nie mogłem odnaleźć loga.
Akceleracja 3D niby jest, a wskazanie glxgears jest takie jak powyżej. Przez ten czarny ekran nie jestem w stanie sprawdzić wskazań optiruna i nie da się powrócić do pulpitu (mimo, że widzę strzałkę) i jestem zmuszony "siłowo" wyłączać laptop. Mimo to sterownik do karty grafiki jest załadowany taki jak po świeżej instalacji Debiana, czyli i915. No i martwi mnie to:

Kod: Zaznacz cały

daniel@debian:~$ glxinfoname of display: :0display: :0  screen: 0direct rendering: Yesserver glx vendor string: SGIserver glx version string: 1.4server glx extensions:    GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_texture_from_pixmap,     GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,     GLX_OML_swap_method, GLX_SGI_swap_control, GLX_SGIS_multisample,     GLX_SGIX_fbconfig, GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group,     GLX_INTEL_swap_eventclient glx vendor string: Mesa Project and SGIclient glx version string: 1.4client glx extensions:    GLX_ARB_create_context, GLX_ARB_create_context_profile,     GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,     GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_framebuffer_sRGB,     GLX_EXT_create_context_es2_profile, GLX_MESA_copy_sub_buffer,     GLX_MESA_multithread_makecurrent, GLX_MESA_swap_control,     GLX_OML_swap_method, GLX_OML_sync_control, GLX_SGI_make_current_read,     GLX_SGI_swap_control, GLX_SGI_video_sync, GLX_SGIS_multisample,     GLX_SGIX_fbconfig, GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group,     GLX_EXT_texture_from_pixmap, GLX_INTEL_swap_eventGLX version: 1.4GLX extensions:    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,     GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,     GLX_MESA_multithread_makecurrent, GLX_MESA_swap_control,     GLX_OML_swap_method, GLX_OML_sync_control, GLX_SGI_make_current_read,     GLX_SGI_swap_control, GLX_SGI_video_sync, GLX_SGIS_multisample,     GLX_SGIX_fbconfig, GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group,     GLX_EXT_texture_from_pixmapOpenGL vendor string: Tungsten Graphics, IncOpenGL renderer string: Mesa DRI Intel(R) Sandybridge Mobile OpenGL version string: 3.0 Mesa 8.0.5OpenGL shading language version string: 1.30OpenGL extensions:    GL_ARB_multisample, GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color,     GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_copy_texture,     GL_EXT_polygon_offset, GL_EXT_subtexture, GL_EXT_texture_object,     GL_EXT_vertex_array, GL_EXT_compiled_vertex_array, GL_EXT_texture,     GL_EXT_texture3D, GL_IBM_rasterpos_clip, GL_ARB_point_parameters,     GL_EXT_draw_range_elements, GL_EXT_packed_pixels, GL_EXT_point_parameters,     GL_EXT_rescale_normal, GL_EXT_separate_specular_color,     GL_EXT_texture_edge_clamp, GL_SGIS_generate_mipmap,     GL_SGIS_texture_border_clamp, GL_SGIS_texture_edge_clamp,     GL_SGIS_texture_lod, GL_ARB_framebuffer_sRGB, GL_ARB_multitexture,     GL_EXT_framebuffer_sRGB, GL_IBM_multimode_draw_arrays,     GL_IBM_texture_mirrored_repeat, GL_3DFX_texture_compression_FXT1,     GL_ARB_texture_cube_map, GL_ARB_texture_env_add, GL_ARB_transpose_matrix,     GL_EXT_blend_func_separate, GL_EXT_fog_coord, GL_EXT_multi_draw_arrays,     GL_EXT_secondary_color, GL_EXT_texture_env_add,     GL_EXT_texture_filter_anisotropic, GL_EXT_texture_lod_bias,     GL_INGR_blend_func_separate, GL_NV_blend_square, GL_NV_light_max_exponent,     GL_NV_texgen_reflection, GL_NV_texture_env_combine4,     GL_SUN_multi_draw_arrays, GL_ARB_texture_border_clamp,     GL_ARB_texture_compression, GL_EXT_framebuffer_object,     GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3, GL_MESA_window_pos,     GL_NV_packed_depth_stencil, GL_NV_texture_rectangle, GL_NV_vertex_program,     GL_ARB_depth_texture, GL_ARB_occlusion_query, GL_ARB_shadow,     GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar,     GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat,     GL_ARB_window_pos, GL_ATI_envmap_bumpmap, GL_EXT_stencil_two_side,     GL_EXT_texture_cube_map, GL_NV_depth_clamp, GL_NV_vertex_program1_1,     GL_APPLE_packed_pixels, GL_APPLE_vertex_array_object, GL_ARB_draw_buffers,     GL_ARB_fragment_program, GL_ARB_fragment_shader, GL_ARB_shader_objects,     GL_ARB_vertex_program, GL_ARB_vertex_shader, GL_ATI_draw_buffers,     GL_ATI_texture_env_combine3, GL_ATI_texture_float, GL_EXT_shadow_funcs,     GL_EXT_stencil_wrap, GL_MESA_pack_invert, GL_MESA_ycbcr_texture,     GL_ARB_depth_clamp, GL_ARB_fragment_program_shadow,     GL_ARB_half_float_pixel, GL_ARB_point_sprite, GL_ARB_shading_language_100,     GL_ARB_sync, GL_ARB_texture_non_power_of_two, GL_ARB_vertex_buffer_object,     GL_ATI_blend_equation_separate, GL_EXT_blend_equation_separate,     GL_OES_read_format, GL_ARB_color_buffer_float, GL_ARB_pixel_buffer_object,     GL_ARB_texture_compression_rgtc, GL_ARB_texture_float,     GL_ARB_texture_rectangle, GL_EXT_packed_float, GL_EXT_pixel_buffer_object,     GL_EXT_texture_compression_rgtc, GL_EXT_texture_rectangle,     GL_EXT_texture_sRGB, GL_EXT_texture_shared_exponent,     GL_ARB_framebuffer_object, GL_EXT_framebuffer_blit,     GL_EXT_framebuffer_multisample, GL_EXT_packed_depth_stencil,     GL_APPLE_object_purgeable, GL_ARB_vertex_array_object,     GL_ATI_separate_stencil, GL_EXT_draw_buffers2,     GL_EXT_gpu_program_parameters, GL_EXT_texture_array,     GL_EXT_texture_integer, GL_EXT_texture_sRGB_decode, GL_EXT_timer_query,     GL_OES_EGL_image, GL_MESA_texture_array, GL_ARB_copy_buffer,     GL_ARB_depth_buffer_float, GL_ARB_half_float_vertex,     GL_ARB_map_buffer_range, GL_ARB_texture_rg, GL_ARB_texture_swizzle,     GL_ARB_vertex_array_bgra, GL_EXT_separate_shader_objects,     GL_EXT_texture_swizzle, GL_EXT_vertex_array_bgra,     GL_NV_conditional_render, GL_ARB_ES2_compatibility,     GL_ARB_draw_elements_base_vertex, GL_ARB_explicit_attrib_location,     GL_ARB_fragment_coord_conventions, GL_ARB_provoking_vertex,     GL_ARB_sampler_objects, GL_ARB_seamless_cube_map,     GL_ARB_shader_texture_lod, GL_EXT_provoking_vertex, GL_EXT_texture_snorm,     GL_MESA_texture_signed_rgba, GL_ARB_robustness, GL_EXT_transform_feedback32 GLX Visuals    visual  x   bf lv rg d st  colorbuffer  sr ax dp st accumbuffer  ms  cav  id dep cl sp  sz l  ci b ro  r  g  b  a F gb bf th cl  r  g  b  a ns b eat----------------------------------------------------------------------------0x021 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None0x022 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None0x090 24 tc  0  24  0 r  . .   8  8  8  0 .  .  0  0  0  0  0  0  0  0 0 None0x091 24 tc  0  24  0 r  y .   8  8  8  0 .  .  0  0  0  0  0  0  0  0 0 None0x092 24 tc  0  24  0 r  y .   8  8  8  0 .  .  0  0  0  0  0  0  0  0 0 None0x093 24 tc  0  24  0 r  . .   8  8  8  0 .  .  0 24  8  0  0  0  0  0 0 None0x094 24 tc  0  24  0 r  y .   8  8  8  0 .  .  0 24  8  0  0  0  0  0 0 None0x095 24 tc  0  24  0 r  y .   8  8  8  0 .  .  0 24  8  0  0  0  0  0 0 None0x096 24 tc  0  32  0 r  . .   8  8  8  8 .  .  0  0  0  0  0  0  0  0 0 None0x097 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0  0  0  0  0  0  0  0 0 None0x098 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0  0  0  0  0  0  0  0 0 None0x099 24 tc  0  32  0 r  . .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None0x09a 24 tc  0  24  0 r  y .   8  8  8  0 .  .  0 24  8  0  0  0  0  0 0 None0x09b 24 tc  0  24  0 r  y .   8  8  8  0 .  .  0 24  8 16 16 16  0  0 0 Slow0x09c 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None0x09d 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8 16 16 16 16  0 0 Slow0x09e 24 dc  0  24  0 r  . .   8  8  8  0 .  .  0  0  0  0  0  0  0  0 0 None0x09f 24 dc  0  24  0 r  y .   8  8  8  0 .  .  0  0  0  0  0  0  0  0 0 None0x0a0 24 dc  0  24  0 r  y .   8  8  8  0 .  .  0  0  0  0  0  0  0  0 0 None0x0a1 24 dc  0  24  0 r  . .   8  8  8  0 .  .  0 24  8  0  0  0  0  0 0 None0x0a2 24 dc  0  24  0 r  y .   8  8  8  0 .  .  0 24  8  0  0  0  0  0 0 None0x0a3 24 dc  0  24  0 r  y .   8  8  8  0 .  .  0 24  8  0  0  0  0  0 0 None0x0a4 24 dc  0  32  0 r  . .   8  8  8  8 .  .  0  0  0  0  0  0  0  0 0 None0x0a5 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0  0  0  0  0  0  0  0 0 None0x0a6 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0  0  0  0  0  0  0  0 0 None0x0a7 24 dc  0  32  0 r  . .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None0x0a8 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None0x0a9 24 dc  0  24  0 r  y .   8  8  8  0 .  .  0 24  8  0  0  0  0  0 0 None0x0aa 24 dc  0  24  0 r  y .   8  8  8  0 .  .  0 24  8 16 16 16  0  0 0 Slow0x0ab 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None0x0ac 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8 16 16 16 16  0 0 Slow0x05f 32 tc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None48 GLXFBConfigs:    visual  x   bf lv rg d st  colorbuffer  sr ax dp st accumbuffer  ms  cav  id dep cl sp  sz l  ci b ro  r  g  b  a F gb bf th cl  r  g  b  a ns b eat----------------------------------------------------------------------------0x060  0 tc  0  16  0 r  . .   5  6  5  0 .  .  0  0  0  0  0  0  0  0 0 None0x061  0 tc  0  16  0 r  y .   5  6  5  0 .  .  0  0  0  0  0  0  0  0 0 None0x062  0 tc  0  16  0 r  y .   5  6  5  0 .  .  0  0  0  0  0  0  0  0 0 None0x063  0 tc  0  16  0 r  . .   5  6  5  0 .  .  0 16  0  0  0  0  0  0 0 None0x064  0 tc  0  16  0 r  y .   5  6  5  0 .  .  0 16  0  0  0  0  0  0 0 None0x065  0 tc  0  16  0 r  y .   5  6  5  0 .  .  0 16  0  0  0  0  0  0 0 None0x066 24 tc  0  24  0 r  . .   8  8  8  0 .  .  0  0  0  0  0  0  0  0 0 None0x067 24 tc  0  24  0 r  y .   8  8  8  0 .  .  0  0  0  0  0  0  0  0 0 None0x068 24 tc  0  24  0 r  y .   8  8  8  0 .  .  0  0  0  0  0  0  0  0 0 None0x069 24 tc  0  24  0 r  . .   8  8  8  0 .  .  0 24  8  0  0  0  0  0 0 None0x06a 24 tc  0  24  0 r  y .   8  8  8  0 .  .  0 24  8  0  0  0  0  0 0 None0x06b 24 tc  0  24  0 r  y .   8  8  8  0 .  .  0 24  8  0  0  0  0  0 0 None0x06c 24 tc  0  32  0 r  . .   8  8  8  8 .  .  0  0  0  0  0  0  0  0 0 None0x06d 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0  0  0  0  0  0  0  0 0 None0x06e 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0  0  0  0  0  0  0  0 0 None0x06f 24 tc  0  32  0 r  . .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None0x070 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None0x071 32 tc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None0x072  0 tc  0  16  0 r  y .   5  6  5  0 .  .  0 16  0  0  0  0  0  0 0 None0x073  0 tc  0  16  0 r  y .   5  6  5  0 .  .  0 16  0 16 16 16  0  0 0 Slow0x074 24 tc  0  24  0 r  y .   8  8  8  0 .  .  0 24  8  0  0  0  0  0 0 None0x075 24 tc  0  24  0 r  y .   8  8  8  0 .  .  0 24  8 16 16 16  0  0 0 Slow0x076 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None0x077 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8 16 16 16 16  0 0 Slow0x078  0 dc  0  16  0 r  . .   5  6  5  0 .  .  0  0  0  0  0  0  0  0 0 None0x079  0 dc  0  16  0 r  y .   5  6  5  0 .  .  0  0  0  0  0  0  0  0 0 None0x07a  0 dc  0  16  0 r  y .   5  6  5  0 .  .  0  0  0  0  0  0  0  0 0 None0x07b  0 dc  0  16  0 r  . .   5  6  5  0 .  .  0 16  0  0  0  0  0  0 0 None0x07c  0 dc  0  16  0 r  y .   5  6  5  0 .  .  0 16  0  0  0  0  0  0 0 None0x07d  0 dc  0  16  0 r  y .   5  6  5  0 .  .  0 16  0  0  0  0  0  0 0 None0x07e 24 dc  0  24  0 r  . .   8  8  8  0 .  .  0  0  0  0  0  0  0  0 0 None0x07f 24 dc  0  24  0 r  y .   8  8  8  0 .  .  0  0  0  0  0  0  0  0 0 None0x080 24 dc  0  24  0 r  y .   8  8  8  0 .  .  0  0  0  0  0  0  0  0 0 None0x081 24 dc  0  24  0 r  . .   8  8  8  0 .  .  0 24  8  0  0  0  0  0 0 None0x082 24 dc  0  24  0 r  y .   8  8  8  0 .  .  0 24  8  0  0  0  0  0 0 None0x083 24 dc  0  24  0 r  y .   8  8  8  0 .  .  0 24  8  0  0  0  0  0 0 None0x084 24 dc  0  32  0 r  . .   8  8  8  8 .  .  0  0  0  0  0  0  0  0 0 None0x085 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0  0  0  0  0  0  0  0 0 None0x086 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0  0  0  0  0  0  0  0 0 None0x087 24 dc  0  32  0 r  . .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None0x088 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None0x089 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None0x08a  0 dc  0  16  0 r  y .   5  6  5  0 .  .  0 16  0  0  0  0  0  0 0 None0x08b  0 dc  0  16  0 r  y .   5  6  5  0 .  .  0 16  0 16 16 16  0  0 0 Slow0x08c 24 dc  0  24  0 r  y .   8  8  8  0 .  .  0 24  8  0  0  0  0  0 0 None0x08d 24 dc  0  24  0 r  y .   8  8  8  0 .  .  0 24  8 16 16 16  0  0 0 Slow0x08e 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None0x08f 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8 16 16 16 16  0 0 Slow
 

Tak jest od samego początku zaraz po instalacji. Wiem, że brak logów jest dość kłopotliwy ale nie zawsze wiem gdzie ich szukać. Googlowałem i próbowałem szukać też rozwiązań, które tam są lecz bez żadnego powodzenia. Gdy instalowałem sterowniki według poradnika, który jest na tej stronie korzystałem z tej wersji: NVIDIA-Linux-x86_64-310.19.run. Jest to najnowsza wersja sterownika dla mojej karty graficznej pobrana bezpośrednio ze strony producenta. Chipset, na którym pracuje moja karta jest Intela, natomiast sterownik NVidii. Nie wiem o co może chodzić. Po tym wszystkim wyrzuciłem wszystko co związane z NVidią oraz Bumblebee więc jest zupełna czystka.

Sterownik, na którym teraz pracuje jest domyślnym, takim jak po instalacji Debiana. W związku z tym mój system czeka na jakąkolwiek pomoc i nie będę nic grzebał póki nie otrzymam pomocy bo straciłem 4 dni i nie zrobiłem nic. Pozdrawiam i liczę na pomoc.

PS: Nie wiem dlaczego wyświetlany jest taki śmietnik przy kodach.

[Rafal_F]

1. W metodzie w której problemem była zła wersja kompilatora powinieneś po zainstalowaniu odpowiedniej wersji odinstalować sterownik nvidii i zainstalować go ponownie. Instalacja kompilatora po tym jak zainstalowałeś sterownik (i skompilowałeś moduł) nie wystarczy.
2. Czy zanim zacząłeś przeglądać te wszystkie poradniki przeczytałeś to: http://wiki.debian.org/NvidiaGraphicsDrivers?

PS. co do śmietnika, to nie korzystasz czasem z opery? Mnie podczas edycji postów ze znacznikami code w operze często wycina znaki nowej linii w tekście zawartym pomiędzy tymi znacznikami.

[sullivan]

Instalowałem jeszcze raz niejednokrotnie, nawet po zmianie kompilatora i nie przyniosło to żadnych efektów. Szczerze to nie przeglądałem tekstu z odnośnika, który podałeś. Nie natknąłem się na to. Angielski znam średnio i nie chciałbym znów niczego zepsuć. Odnośnie krzaków to jestem po świerzej instalacji, więc nie ma tu nic poza Konquerorem.

[fnmirk]

sullivan, przejrzyj:
http://debian.linux.pl/threads/12771-Za ... #post81406

i uzupełnij informacje.

Przestań się koncentrować na wynikach polecenia glxgears bo jest to najmniej wiarygodne źródło informacji o działaniu karty graficznej.

Ps. Odnośnie usuwania znaków końca linii, w przypadku logów na forum, jest to wina używanego edytora. Jeżeli tak się dzieje należy zmienić edytor, w którym się sprawdza logi itp.

[sullivan]

fnmirk, jutro dostarczę logi z w/w linku do Waszej analizy. Mam nadzieję, że uda mi się rozwiązać problem i będę mógł się zająć dalszą konfiguracją systemu, bo zależy mi na jego używaniu.

PS: Odnośnie logów na forum używam polecenia "cat" i kopiuje tutaj bezpośrednio z terminala. Następnym razem spróbuje przez "nano"

Dodane:
Uzupełniam wpisy:

Kod: Zaznacz cały

 daniel@debian:~$ uname -a
 Linux debian 3.2.0-4-amd64 #1 SMP Debian 3.2.35-2 x86_64 GNU/Linux
 

Kod: Zaznacz cały

 daniel@debian:~$ dpkg --print-architecture
 amd64
 

Kod: Zaznacz cały

 daniel@debian:~$ lspci -k
 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
         Subsystem: Samsung Electronics Co Ltd Device c0b6
         Kernel driver in use: agpgart-intel
 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
         Kernel driver in use: pcieport
 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
         Subsystem: Samsung Electronics Co Ltd Device c0b6
         Kernel driver in use: i915
 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
         Subsystem: Samsung Electronics Co Ltd Device c0b6
 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
         Subsystem: Samsung Electronics Co Ltd Device c0b6
         Kernel driver in use: ehci_hcd
 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04)
         Subsystem: Samsung Electronics Co Ltd Device c0b6
         Kernel driver in use: snd_hda_intel
 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4)
         Kernel driver in use: pcieport
 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4)
         Kernel driver in use: pcieport
 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
         Subsystem: Samsung Electronics Co Ltd Device c0b6
         Kernel driver in use: ehci_hcd
 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 04)
         Subsystem: Samsung Electronics Co Ltd Device c0b6
 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04)
         Subsystem: Samsung Electronics Co Ltd Device c0b6
         Kernel driver in use: ahci
 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04)
         Subsystem: Samsung Electronics Co Ltd Device c0b6
 01:00.0 3D controller: NVIDIA Corporation GF119 [GeForce GT 520MX] (rev a1)
         Subsystem: Samsung Electronics Co Ltd Device c0b6
 02:00.0 Network controller: Intel Corporation Centrino Wireless-N 130 (rev 34)
         Subsystem: Intel Corporation Centrino Wireless-N 130 BGN
         Kernel driver in use: iwlwifi
 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)                       
         Subsystem: Samsung Electronics Co Ltd Device c0b6                                                                                         
         Kernel driver in use: r8169
 

Kod: Zaznacz cały

 daniel@debian:~$ lspci -n                                                                                                                         
 00:00.0 0600: 8086:0104 (rev 09)
 00:01.0 0604: 8086:0101 (rev 09)
 00:02.0 0300: 8086:0116 (rev 09)
 00:16.0 0780: 8086:1c3a (rev 04)
 00:1a.0 0c03: 8086:1c2d (rev 04)
 00:1b.0 0403: 8086:1c20 (rev 04)
 00:1c.0 0604: 8086:1c10 (rev b4)
 00:1c.3 0604: 8086:1c16 (rev b4)
 00:1d.0 0c03: 8086:1c26 (rev 04)
 00:1f.0 0601: 8086:1c49 (rev 04)
 00:1f.2 0106: 8086:1c03 (rev 04)
 00:1f.3 0c05: 8086:1c22 (rev 04)
 01:00.0 0302: 10de:1051 (rev a1)
 02:00.0 0280: 8086:0896 (rev 34)
 03:00.0 0200: 10ec:8168 (rev 06)
 

Xorg.0.log

Kod: Zaznacz cały

 [    18.610] 
 X.Org X Server 1.12.4
 Release Date: 2012-08-27
 [    18.610] X Protocol Version 11, Revision 0
 [    18.610] Build Operating System: Linux 3.2.0-4.drm-amd64 x86_64 Debian
 [    18.610] Current Operating System: Linux debian 3.2.0-4-amd64 #1 SMP Debian 3.2.35-2 x86_64
 [    18.610] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=4ead4330-fa16-4c5b-8b86-b38206172905 ro quiet
 [    18.610] Build Date: 29 November 2012  07:18:16PM
 [    18.610] xorg-server 2:1.12.4-4 (Julien Cristau <jcristau@debian.org>) 
 [    18.610] Current version of pixman: 0.26.0
 [    18.610] 	Before reporting problems, check http://wiki.x.org
 	to make sure that you have the latest version.
 [    18.610] Markers: (--) probed, (**) from config file, (==) default setting,
 	(++) from command line, (!!) notice, (II) informational,
 	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
 [    18.611] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Dec 30 12:43:52 2012
 [    18.650] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
 [    18.685] (==) No Layout section.  Using the first Screen section.
 [    18.685] (==) No screen section available. Using defaults.
 [    18.685] (**) |-->Screen "Default Screen Section" (0)
 [    18.685] (**) |   |-->Monitor "<default monitor>"
 [    18.685] (==) No monitor specified for screen "Default Screen Section".
 	Using a default monitor configuration.
 [    18.685] (==) Automatically adding devices
 [    18.685] (==) Automatically enabling devices
 [    18.722] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
 [    18.722] 	Entry deleted from font path.
 [    18.746] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
 [    18.746] 	Entry deleted from font path.
 [    18.746] (==) FontPath set to:
 	/usr/share/fonts/X11/misc,
 	/usr/share/fonts/X11/100dpi/:unscaled,
 	/usr/share/fonts/X11/75dpi/:unscaled,
 	/usr/share/fonts/X11/Type1,
 	/usr/share/fonts/X11/100dpi,
 	/usr/share/fonts/X11/75dpi,
 	built-ins
 [    18.746] (==) ModulePath set to "/usr/lib/xorg/modules"
 [    18.746] (II) The server relies on udev to provide the list of input devices.
 	If no devices become available, reconfigure udev or disable AutoAddDevices.
 [    18.746] (II) Loader magic: 0x7fe7bfe44ae0
 [    18.746] (II) Module ABI versions:
 [    18.746] 	X.Org ANSI C Emulation: 0.4
 [    18.746] 	X.Org Video Driver: 12.1
 [    18.746] 	X.Org XInput driver : 16.0
 [    18.746] 	X.Org Server Extension : 6.0
 [    18.747] (--) PCI:*(0:0:2:0) 8086:0116:144d:c0b6 rev 9, Mem @ 0xe1400000/4194304, 0xd0000000/268435456, I/O @ 0x00004000/64
 [    18.748] (--) PCI: (0:1:0:0) 10de:1051:144d:c0b6 rev 161, Mem @ 0xe0000000/16777216, 0xb0000000/268435456, 0xc0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288
 [    18.748] (II) Open ACPI successful (/var/run/acpid.socket)
 [    18.748] (II) LoadModule: "extmod"
 [    18.805] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
 [    18.821] (II) Module extmod: vendor="X.Org Foundation"
 [    18.821] 	compiled for 1.12.4, module version = 1.0.0
 [    18.821] 	Module class: X.Org Server Extension
 [    18.821] 	ABI class: X.Org Server Extension, version 6.0
 [    18.821] (II) Loading extension SELinux
 [    18.821] (II) Loading extension MIT-SCREEN-SAVER
 [    18.821] (II) Loading extension XFree86-VidModeExtension
 [    18.821] (II) Loading extension XFree86-DGA
 [    18.821] (II) Loading extension DPMS
 [    18.821] (II) Loading extension XVideo
 [    18.821] (II) Loading extension XVideo-MotionCompensation
 [    18.821] (II) Loading extension X-Resource
 [    18.821] (II) LoadModule: "dbe"
 [    18.821] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
 [    18.832] (II) Module dbe: vendor="X.Org Foundation"
 [    18.832] 	compiled for 1.12.4, module version = 1.0.0
 [    18.832] 	Module class: X.Org Server Extension
 [    18.832] 	ABI class: X.Org Server Extension, version 6.0
 [    18.832] (II) Loading extension DOUBLE-BUFFER
 [    18.832] (II) LoadModule: "glx"
 [    18.832] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
 [    18.854] (II) Module glx: vendor="X.Org Foundation"
 [    18.854] 	compiled for 1.12.4, module version = 1.0.0
 [    18.854] 	ABI class: X.Org Server Extension, version 6.0
 [    18.854] (==) AIGLX enabled
 [    18.854] (II) Loading extension GLX
 [    18.854] (II) LoadModule: "record"
 [    18.854] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
 [    18.855] (II) Module record: vendor="X.Org Foundation"
 [    18.855] 	compiled for 1.12.4, module version = 1.13.0
 [    18.855] 	Module class: X.Org Server Extension
 [    18.855] 	ABI class: X.Org Server Extension, version 6.0
 [    18.855] (II) Loading extension RECORD
 [    18.855] (II) LoadModule: "dri"
 [    18.855] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
 [    18.864] (II) Module dri: vendor="X.Org Foundation"
 [    18.864] 	compiled for 1.12.4, module version = 1.0.0
 [    18.864] 	ABI class: X.Org Server Extension, version 6.0
 [    18.864] (II) Loading extension XFree86-DRI
 [    18.864] (II) LoadModule: "dri2"
 [    18.865] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
 [    18.866] (II) Module dri2: vendor="X.Org Foundation"
 [    18.866] 	compiled for 1.12.4, module version = 1.2.0
 [    18.866] 	ABI class: X.Org Server Extension, version 6.0
 [    18.866] (II) Loading extension DRI2
 [    18.866] (==) Matched intel as autoconfigured driver 0
 [    18.866] (==) Matched vesa as autoconfigured driver 1
 [    18.866] (==) Matched fbdev as autoconfigured driver 2
 [    18.866] (==) Assigned the driver to the xf86ConfigLayout
 [    18.866] (II) LoadModule: "intel"
 [    18.866] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
 [    18.923] (II) Module intel: vendor="X.Org Foundation"
 [    18.923] 	compiled for 1.12.3.902, module version = 2.19.0
 [    18.923] 	Module class: X.Org Video Driver
 [    18.923] 	ABI class: X.Org Video Driver, version 12.1
 [    18.923] (II) LoadModule: "vesa"
 [    18.924] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
 [    18.933] (II) Module vesa: vendor="X.Org Foundation"
 [    18.933] 	compiled for 1.12.1, module version = 2.3.1
 [    18.933] 	Module class: X.Org Video Driver
 [    18.933] 	ABI class: X.Org Video Driver, version 12.0
 [    18.933] (II) LoadModule: "fbdev"
 [    18.934] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
 [    18.937] (II) Module fbdev: vendor="X.Org Foundation"
 [    18.937] 	compiled for 1.12.1, module version = 0.4.2
 [    18.937] 	ABI class: X.Org Video Driver, version 12.0
 [    18.937] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
 	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
 	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
 	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
 	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
 	Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
 	Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
 	Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
 	Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
 	Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
 	Ivybridge Server (GT2)
 [    18.938] (II) VESA: driver for VESA chipsets: vesa
 [    18.938] (II) FBDEV: driver for framebuffer: fbdev
 [    18.938] (++) using VT number 7
 

 [    18.947] (WW) Falling back to old probe method for vesa
 [    18.947] (WW) Falling back to old probe method for fbdev
 [    18.947] (II) Loading sub module "fbdevhw"
 [    18.947] (II) LoadModule: "fbdevhw"
 [    18.947] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
 [    18.953] (II) Module fbdevhw: vendor="X.Org Foundation"
 [    18.953] 	compiled for 1.12.4, module version = 0.0.2
 [    18.953] 	ABI class: X.Org Video Driver, version 12.1
 [    18.953] drmOpenDevice: node name is /dev/dri/card0
 [    18.953] drmOpenDevice: open result is 9, (OK)
 [    18.953] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
 [    18.953] drmOpenDevice: node name is /dev/dri/card0
 [    18.953] drmOpenDevice: open result is 9, (OK)
 [    18.953] drmOpenByBusid: drmOpenMinor returns 9
 [    18.953] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
 [    18.953] (II) intel(0): Creating default Display subsection in Screen section
 	"Default Screen Section" for depth/fbbpp 24/32
 [    18.953] (==) intel(0): Depth 24, (--) framebuffer bpp 32
 [    18.953] (==) intel(0): RGB weight 888
 [    18.953] (==) intel(0): Default visual is TrueColor
 [    18.953] (II) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2)
 [    18.953] (--) intel(0): Chipset: "Sandybridge Mobile (GT2)"
 [    18.953] (**) intel(0): Relaxed fencing enabled
 [    18.953] (**) intel(0): Wait on SwapBuffers? enabled
 [    18.953] (**) intel(0): Triple buffering? enabled
 [    18.953] (**) intel(0): Framebuffer tiled
 [    18.953] (**) intel(0): Pixmaps tiled
 [    18.953] (**) intel(0): 3D buffers tiled
 [    18.967] (**) intel(0): SwapBuffers wait enabled
 [    18.967] (==) intel(0): video overlay key set to 0x101fe
 [    18.968] (II) intel(0): Output LVDS1 has no monitor section
 [    18.968] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video1
 [    18.968] (II) intel(0): Output VGA1 has no monitor section
 [    18.991] (II) intel(0): Output HDMI1 has no monitor section
 [    19.040] (II) intel(0): Output DP1 has no monitor section
 [    19.040] (II) intel(0): EDID for output LVDS1
 [    19.040] (II) intel(0): Manufacturer: SEC  Model: 324a  Serial#: 0
 [    19.040] (II) intel(0): Year: 2011  Week: 0
 [    19.040] (II) intel(0): EDID Version: 1.3
 [    19.040] (II) intel(0): Digital Display Input
 [    19.040] (II) intel(0): Max Image Size [cm]: horiz.: 34  vert.: 19
 [    19.040] (II) intel(0): Gamma: 2.20
 [    19.040] (II) intel(0): No DPMS capabilities specified
 [    19.040] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
 [    19.040] (II) intel(0): First detailed timing is preferred mode
 [    19.040] (II) intel(0): redX: 0.570 redY: 0.340   greenX: 0.330 greenY: 0.560
 [    19.040] (II) intel(0): blueX: 0.160 blueY: 0.135   whiteX: 0.313 whiteY: 0.329
 [    19.040] (II) intel(0): Manufacturer's mask: 0
 [    19.040] (II) intel(0): Supported detailed timing:
 [    19.040] (II) intel(0): clock: 70.7 MHz   Image Size:  344 x 194 mm
 [    19.040] (II) intel(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1486 h_border: 0
 [    19.040] (II) intel(0): v_active: 768  v_sync: 770  v_sync_end 775 v_blanking: 792 v_border: 0
 [    19.040] (II) intel(0): Unknown vendor-specific block f
 [    19.040] (II) intel(0):  SAMSUNG
 [    19.040] (II) intel(0):  LTN156AT190
 [    19.040] (II) intel(0): EDID (in hex):
 [    19.040] (II) intel(0): 	00ffffffffffff004ca34a3200000000
 [    19.040] (II) intel(0): 	00150103802213780a09259257548f29
 [    19.040] (II) intel(0): 	22505400000001010101010101010101
 [    19.040] (II) intel(0): 	0101010101019e1b5678500018303020
 [    19.040] (II) intel(0): 	250058c2100000190000000f00000000
 [    19.040] (II) intel(0): 	00000000002387026401000000fe0053
 [    19.040] (II) intel(0): 	414d53554e470a2020202020000000fe
 [    19.040] (II) intel(0): 	004c544e31353641543139300a2000b4
 [    19.040] (II) intel(0): EDID vendor "SEC", prod id 12874
 [    19.040] (II) intel(0): Printing DDC gathered Modelines:
 [    19.040] (II) intel(0): Modeline "1366x768"x0.0   70.70  1366 1414 1446 1486  768 770 775 792 -hsync -vsync (47.6 kHz eP)
 [    19.040] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
 [    19.040] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
 [    19.040] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
 [    19.040] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
 [    19.040] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
 [    19.040] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
 [    19.040] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
 [    19.040] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
 [    19.040] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
 [    19.040] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
 [    19.040] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
 [    19.040] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
 [    19.040] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
 [    19.040] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
 [    19.040] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
 [    19.040] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
 [    19.040] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
 [    19.040] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
 [    19.040] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
 [    19.040] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
 [    19.040] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
 [    19.040] (II) intel(0): Printing probed modes for output LVDS1
 [    19.040] (II) intel(0): Modeline "1366x768"x60.1   70.70  1366 1414 1446 1486  768 770 775 792 -hsync -vsync (47.6 kHz eP)
 [    19.040] (II) intel(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
 [    19.040] (II) intel(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
 [    19.040] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
 [    19.040] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
 [    19.040] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
 [    19.040] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
 [    19.040] (II) intel(0): EDID for output VGA1
 [    19.064] (II) intel(0): EDID for output HDMI1
 [    19.112] (II) intel(0): EDID for output DP1
 [    19.112] (II) intel(0): Output LVDS1 connected
 [    19.112] (II) intel(0): Output VGA1 disconnected
 [    19.112] (II) intel(0): Output HDMI1 disconnected
 [    19.112] (II) intel(0): Output DP1 disconnected
 [    19.112] (II) intel(0): Using exact sizes for initial modes
 [    19.112] (II) intel(0): Output LVDS1 using initial mode 1366x768
 [    19.112] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
 [    19.112] (II) intel(0): Kernel page flipping support detected, enabling
 [    19.112] (**) intel(0): Display dimensions: (340, 190) mm
 [    19.112] (**) intel(0): DPI set to (102, 102)
 [    19.112] (II) Loading sub module "fb"
 [    19.112] (II) LoadModule: "fb"
 [    19.112] (II) Loading /usr/lib/xorg/modules/libfb.so
 [    19.123] (II) Module fb: vendor="X.Org Foundation"
 [    19.123] 	compiled for 1.12.4, module version = 1.0.0
 [    19.123] 	ABI class: X.Org ANSI C Emulation, version 0.4
 [    19.123] (II) Loading sub module "dri2"
 [    19.123] (II) LoadModule: "dri2"
 [    19.124] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
 [    19.124] (II) Module dri2: vendor="X.Org Foundation"
 [    19.124] 	compiled for 1.12.4, module version = 1.2.0
 [    19.124] 	ABI class: X.Org Server Extension, version 6.0
 [    19.124] (II) UnloadModule: "vesa"
 [    19.124] (II) Unloading vesa
 [    19.124] (II) UnloadModule: "fbdev"
 [    19.124] (II) Unloading fbdev
 [    19.124] (II) UnloadSubModule: "fbdevhw"
 [    19.124] (II) Unloading fbdevhw
 [    19.124] (==) Depth 24 pixmap format is 32 bpp
 [    19.125] (II) intel(0): [DRI2] Setup complete
 [    19.125] (II) intel(0): [DRI2]   DRI driver: i965
 [    19.125] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
 [    19.128] (II) UXA(0): Driver registered support for the following operations:
 [    19.128] (II)         solid
 [    19.128] (II)         copy
 [    19.128] (II)         composite (RENDER acceleration)
 [    19.128] (II)         put_image
 [    19.129] (II)         get_image
 [    19.129] (==) intel(0): Backing store disabled
 [    19.129] (==) intel(0): Silken mouse enabled
 [    19.129] (II) intel(0): Initializing HW Cursor
 [    19.129] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
 [    19.130] (==) intel(0): DPMS enabled
 [    19.130] (==) intel(0): Intel XvMC decoder enabled
 [    19.130] (II) intel(0): Set up textured video
 [    19.130] (II) intel(0): [XvMC] xvmc_vld driver initialized.
 [    19.130] (II) intel(0): direct rendering: DRI2 Enabled
 [    19.130] (==) intel(0): hotplug detection: "enabled"
 [    19.196] (--) RandR disabled
 [    19.196] (II) Initializing built-in extension Generic Event Extension
 [    19.196] (II) Initializing built-in extension SHAPE
 [    19.196] (II) Initializing built-in extension MIT-SHM
 [    19.196] (II) Initializing built-in extension XInputExtension
 [    19.196] (II) Initializing built-in extension XTEST
 [    19.196] (II) Initializing built-in extension BIG-REQUESTS
 [    19.196] (II) Initializing built-in extension SYNC
 [    19.196] (II) Initializing built-in extension XKEYBOARD
 [    19.196] (II) Initializing built-in extension XC-MISC
 [    19.196] (II) Initializing built-in extension SECURITY
 [    19.196] (II) Initializing built-in extension XINERAMA
 [    19.196] (II) Initializing built-in extension XFIXES
 [    19.196] (II) Initializing built-in extension RENDER
 [    19.196] (II) Initializing built-in extension RANDR
 [    19.196] (II) Initializing built-in extension COMPOSITE
 [    19.196] (II) Initializing built-in extension DAMAGE
 [    19.196] (II) SELinux: Disabled on system
 [    19.372] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
 [    19.372] (II) AIGLX: enabled GLX_INTEL_swap_event
 [    19.372] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
 [    19.372] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
 [    19.372] (II) AIGLX: Loaded and initialized i965
 [    19.372] (II) GLX: Initialized DRI2 GL provider for screen 0
 [    19.373] (II) intel(0): Setting screen physical size to 361 x 203
 [    19.665] (II) config/udev: Adding input device Power Button (/dev/input/event6)
 [    19.665] (**) Power Button: Applying InputClass "evdev keyboard catchall"
 [    19.665] (II) LoadModule: "evdev"
 [    19.665] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
 [    19.681] (II) Module evdev: vendor="X.Org Foundation"
 [    19.681] 	compiled for 1.12.1, module version = 2.7.0
 [    19.681] 	Module class: X.Org XInput Driver
 [    19.681] 	ABI class: X.Org XInput driver, version 16.0
 [    19.681] (II) Using input driver 'evdev' for 'Power Button'
 [    19.681] (**) Power Button: always reports core events
 [    19.681] (**) evdev: Power Button: Device: "/dev/input/event6"
 [    19.681] (--) evdev: Power Button: Vendor 0 Product 0x1
 [    19.681] (--) evdev: Power Button: Found keys
 [    19.681] (II) evdev: Power Button: Configuring as keyboard
 [    19.681] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event6"
 [    19.681] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
 [    19.681] (**) Option "xkb_rules" "evdev"
 [    19.681] (**) Option "xkb_model" "pc105"
 [    19.681] (**) Option "xkb_layout" "pl"
 [    19.740] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
 [    19.740] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
 [    19.740] (II) Using input driver 'evdev' for 'Video Bus'
 [    19.740] (**) Video Bus: always reports core events
 [    19.740] (**) evdev: Video Bus: Device: "/dev/input/event10"
 [    19.740] (--) evdev: Video Bus: Vendor 0 Product 0x6
 [    19.740] (--) evdev: Video Bus: Found keys
 [    19.740] (II) evdev: Video Bus: Configuring as keyboard
 [    19.740] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input10/event10"
 [    19.740] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
 [    19.740] (**) Option "xkb_rules" "evdev"
 [    19.740] (**) Option "xkb_model" "pc105"
 [    19.740] (**) Option "xkb_layout" "pl"
 [    19.741] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
 [    19.742] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
 [    19.742] (II) Using input driver 'evdev' for 'Video Bus'
 [    19.742] (**) Video Bus: always reports core events
 [    19.742] (**) evdev: Video Bus: Device: "/dev/input/event9"
 [    19.742] (--) evdev: Video Bus: Vendor 0 Product 0x6
 [    19.742] (--) evdev: Video Bus: Found keys
 [    19.742] (II) evdev: Video Bus: Configuring as keyboard
 [    19.742] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2c/LNXVIDEO:00/input/input9/event9"
 [    19.742] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
 [    19.742] (**) Option "xkb_rules" "evdev"
 [    19.742] (**) Option "xkb_model" "pc105"
 [    19.742] (**) Option "xkb_layout" "pl"
 [    19.743] (II) config/udev: Adding input device Power Button (/dev/input/event5)
 [    19.743] (**) Power Button: Applying InputClass "evdev keyboard catchall"
 [    19.743] (II) Using input driver 'evdev' for 'Power Button'
 [    19.743] (**) Power Button: always reports core events
 [    19.743] (**) evdev: Power Button: Device: "/dev/input/event5"
 [    19.743] (--) evdev: Power Button: Vendor 0 Product 0x1
 [    19.743] (--) evdev: Power Button: Found keys
 [    19.743] (II) evdev: Power Button: Configuring as keyboard
 [    19.743] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5/event5"
 [    19.743] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
 [    19.743] (**) Option "xkb_rules" "evdev"
 [    19.743] (**) Option "xkb_model" "pc105"
 [    19.743] (**) Option "xkb_layout" "pl"
 [    19.744] (II) config/udev: Adding input device Lid Switch (/dev/input/event4)
 [    19.744] (II) No input driver specified, ignoring this device.
 [    19.744] (II) This device may have been added with another device file.
 [    19.745] (II) config/udev: Adding input device WebCam SCB-1100N (/dev/input/event8)
 [    19.745] (**) WebCam SCB-1100N: Applying InputClass "evdev keyboard catchall"
 [    19.745] (II) Using input driver 'evdev' for 'WebCam SCB-1100N'
 [    19.745] (**) WebCam SCB-1100N: always reports core events
 [    19.745] (**) evdev: WebCam SCB-1100N: Device: "/dev/input/event8"
 [    19.745] (--) evdev: WebCam SCB-1100N: Vendor 0x2232 Product 0x1008
 [    19.745] (--) evdev: WebCam SCB-1100N: Found keys
 [    19.745] (II) evdev: WebCam SCB-1100N: Configuring as keyboard
 [    19.745] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input8/event8"
 [    19.745] (II) XINPUT: Adding extended input device "WebCam SCB-1100N" (type: KEYBOARD, id 10)
 [    19.745] (**) Option "xkb_rules" "evdev"
 [    19.745] (**) Option "xkb_model" "pc105"
 [    19.745] (**) Option "xkb_layout" "pl"
 [    19.747] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event11)
 [    19.747] (II) No input driver specified, ignoring this device.
 [    19.747] (II) This device may have been added with another device file.
 [    19.747] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event12)
 [    19.747] (II) No input driver specified, ignoring this device.
 [    19.747] (II) This device may have been added with another device file.
 [    19.748] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event13)
 [    19.748] (II) No input driver specified, ignoring this device.
 [    19.748] (II) This device may have been added with another device file.
 [    19.748] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1)
 [    19.748] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
 [    19.748] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
 [    19.748] (**) Logitech USB Receiver: always reports core events
 [    19.749] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event1"
 [    19.749] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
 [    19.749] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
 [    19.749] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
 [    19.749] (--) evdev: Logitech USB Receiver: Found relative axes
 [    19.749] (--) evdev: Logitech USB Receiver: Found x and y relative axes
 [    19.749] (II) evdev: Logitech USB Receiver: Configuring as mouse
 [    19.749] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
 [    19.749] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
 [    19.749] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
 [    19.749] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input1/event1"
 [    19.749] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 11)
 [    19.749] (II) evdev: Logitech USB Receiver: initialized for relative axes.
 [    19.750] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
 [    19.750] (**) Logitech USB Receiver: (accel) acceleration profile 0
 [    19.750] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
 [    19.750] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
 [    19.750] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
 [    19.750] (II) No input driver specified, ignoring this device.
 [    19.750] (II) This device may have been added with another device file.
 [    19.751] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
 [    19.751] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
 [    19.751] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
 [    19.751] (**) Logitech USB Receiver: always reports core events
 [    19.751] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event2"
 [    19.751] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
 [    19.751] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
 [    19.751] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
 [    19.751] (--) evdev: Logitech USB Receiver: Found relative axes
 [    19.751] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
 [    19.751] (--) evdev: Logitech USB Receiver: Found absolute axes
 [    19.751] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
 [    19.751] (--) evdev: Logitech USB Receiver: Found keys
 [    19.751] (II) evdev: Logitech USB Receiver: Configuring as mouse
 [    19.751] (II) evdev: Logitech USB Receiver: Configuring as keyboard
 [    19.751] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
 [    19.751] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
 [    19.751] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
 [    19.751] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/input/input2/event2"
 [    19.752] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 12)
 [    19.752] (**) Option "xkb_rules" "evdev"
 [    19.752] (**) Option "xkb_model" "pc105"
 [    19.752] (**) Option "xkb_layout" "pl"
 [    19.752] (II) evdev: Logitech USB Receiver: initialized for relative axes.
 [    19.752] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
 [    19.752] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
 [    19.753] (**) Logitech USB Receiver: (accel) acceleration profile 0
 [    19.753] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
 [    19.753] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
 [    19.753] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
 [    19.753] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
 [    19.753] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
 [    19.753] (**) AT Translated Set 2 keyboard: always reports core events
 [    19.753] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
 [    19.753] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
 [    19.753] (--) evdev: AT Translated Set 2 keyboard: Found keys
 [    19.754] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
 [    19.754] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
 [    19.754] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
 [    19.754] (**) Option "xkb_rules" "evdev"
 [    19.754] (**) Option "xkb_model" "pc105"
 [    19.754] (**) Option "xkb_layout" "pl"
 [    19.755] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event7)
 [    19.755] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
 [    19.755] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
 [    19.755] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
 [    19.755] (II) LoadModule: "synaptics"
 [    19.755] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
 [    19.784] (II) Module synaptics: vendor="X.Org Foundation"
 [    19.784] 	compiled for 1.12.4, module version = 1.6.2
 [    19.784] 	Module class: X.Org XInput Driver
 [    19.784] 	ABI class: X.Org XInput driver, version 16.0
 [    19.784] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
 [    19.784] (**) ETPS/2 Elantech Touchpad: always reports core events
 [    19.784] (**) Option "Device" "/dev/input/event7"
 [    19.908] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 2940
 [    19.908] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 1400
 [    19.908] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
 [    19.908] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
 [    19.908] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
 [    19.908] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
 [    19.908] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
 [    19.908] (**) ETPS/2 Elantech Touchpad: always reports core events
 [    19.912] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event7"
 [    19.912] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 14)
 [    19.912] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
 [    19.912] (**) synaptics: ETPS/2 Elantech Touchpad: MaxSpeed is now 1.75
 [    19.912] (**) synaptics: ETPS/2 Elantech Touchpad: AccelFactor is now 0.061
 [    19.912] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
 [    19.912] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
 [    19.913] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
 [    19.913] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
 [    19.913] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
 [    19.913] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
 [    19.913] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
 [    19.914] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
 [    19.914] (II) No input driver specified, ignoring this device.
 [    19.914] (II) This device may have been added with another device file.
 [    36.076] (II) intel(0): EDID vendor "SEC", prod id 12874
 [    36.076] (II) intel(0): Printing DDC gathered Modelines:
 [    36.076] (II) intel(0): Modeline "1366x768"x0.0   70.70  1366 1414 1446 1486  768 770 775 792 -hsync -vsync (47.6 kHz eP)
 [    56.117] (II) intel(0): EDID vendor "SEC", prod id 12874
 [    56.117] (II) intel(0): Printing DDC gathered Modelines:
 [    56.117] (II) intel(0): Modeline "1366x768"x0.0   70.70  1366 1414 1446 1486  768 770 775 792 -hsync -vsync (47.6 kHz eP)
 

[fnmirk]

Nie wiem, w którym miejscu przekombinowałeś.

Użyj jakiejś dystrybucji narzędziowej Linuksa:
http://debian.linux.pl/threads/9479-Dys ... #post61503

SystemRescueCD, Knoppix lub grml.

Przedstaw na forum wyniki poleceń przekierowane do pliku.

Kod: Zaznacz cały

lspci -n > plik01.txt
lspci -k > plik02.txt
cp /var/log/Xorg.0.log /home/użytkownik/plik03.txt

Wstaw jako załączniki.

[sullivan]

fnmirk, takie wskazania mam od samego początku, zaraz po instalacji i aktualizacji Debiana po zmianie repozytoriów na te z forum i przed kombinowaniem ze sterownikami. Te wpisy, o które prosisz mam sprawdzić na którymś z systemów, które podałeś czy najzwyczajniej zapisać do pliku i wstawić jako załącznik, bo nie bardzo rozumiem?

Dodane:
Może inaczej. Spróbuję zainstalować jeszcze raz sterownik NVidii ze strony producenta. Gdy napotkam jakiś błąd przedstawię loga z /var/log/nvidia-installer.log? W sumie to mam starego loga z odinstalowania sterownika. Może on coś Wam jeszcze podpowie:

Kod: Zaznacz cały

nvidia-installer log file '/var/log/nvidia-installer.log'
creation time: Sat Dec 29 16:54:16 2012
installer version: 310.19


PATH: /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin


nvidia-installer command line:
    ./nvidia-installer
    --uninstall


Using: nvidia-installer ncurses user interface
-> If you plan to no longer use the NVIDIA driver, you should make sure that no X screens are configured to use the NVIDIA X driver in your X configuration file. If you used nvidia-xconfig to configure X, it may have created a backup of your original configuration. Would you like to run `nvidia-xconfig --restore-original-backup` to attempt restoration of the original X configuration file? (Answer: Yes)
ERROR: Failed to run `/usr/bin/nvidia-xconfig --restore-original-backup`:


WARNING: Unable to locate/open X configuration file.




ERROR: Unable to restore from original backup file
       '/etc/X11/xorg.conf.nvidia-xconfig-original' (No such file or
       directory)
-> Parsing log file:
-> done.
-> Validating previous installation:
-> done.
-> Uninstalling NVIDIA Accelerated Graphics Driver for Linux-x86_64 (1.0-31019 (310.19)):
WARNING: Failed to delete the directory '/usr/share/doc/NVIDIA_GLX-1.0' (Directory not empty).
-> Unable to delete directories created by previous installation.
-> done.
-> Uninstallation of existing driver: NVIDIA Accelerated Graphics Driver for Linux-x86_64 (310.19) is complete.

Aha, no i dodam jeszcze, że nie mam wygenerowanego pliku Xorg.conf. Jak instalowałem w/w sterownik to instalator nie wygenerował go automatycznie i nie tworzyłem go ręcznie.

[otypoks]

Zdecyduj się z której karty chcesz korzystać lub zainstaluj poprawnie bumblebee. Sterownik z paczki NV nie nadaje się do użycia z i915(nadpisuje libglx z mesy). Xorg.conf również nie jest potrzebny.

[sullivan]

Ale ja mam jedną kartę... Chyba że mi o czymś nie wiadomo. Bumblebee instalowałem poprawnie. Gdybym miał loga z uruchomienia optiruna to bym go tutaj wkleił. Jak mówiłem nic z NVidii teraz nie mam zainstalowanego. Lece na fabrycznym sterowniku. W windowsie 7 jak instalowałem sterowniki do grafiki to instalowałem 2. Jeden do chipsetu (sterownik intela) a drugi chyba do akceleracji (NVidii)

[otypoks]

Kod: Zaznacz cały

00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
         Subsystem: Samsung Electronics Co Ltd Device c0b6
         Kernel driver in use: i915

Czarno na białym, że jest załadowany sterownik do karty intela.