Problem z x-ami pod Etch

Zagadnienia dotyczące menadżerów okien, środowisk graficznych - X, KDE, GNOME, Fluxbox, XFCE., Compiz itp.
Rady
Posty: 87
Rejestracja: 20 kwietnia 2007, 11:57

Problem z x-ami pod Etch

Post autor: Rady »

Wiec problem jest następujący :

Zainstalowałem Etch'a i używam Gnome podczas pracy na nim system się wiesza lub wyświetla się czarny ekran, sprzęt jest w porządku testowałem proca i pamięć wszystko git. Mam radeona 9550 i monitor Flatron LG L1952S podczas rekonfiguracji Xorg wykrywa monitor ustawienia karty grafiki biorę na ati, pod konsolą chodzi bez żadnych problemów ale jak tylko wejdę w środowisko graficzne i popracuje trochę to albo zwis albo czarny ekran pod KDE to samo, podczas ładowania systemu na monitorze wyświetla się komunikat :

OUT OF RANGE 36,8 kHZ/82 Hz

A oto config dla x11 :

Kod: Zaznacz cały

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
	FontPath	"/usr/share/fonts/X11/misc"
	FontPath	"/usr/X11R6/lib/X11/fonts/misc"
	FontPath	"/usr/share/fonts/X11/cyrillic"
	FontPath	"/usr/X11R6/lib/X11/fonts/cyrillic"
	FontPath	"/usr/share/fonts/X11/100dpi/:unscaled"
	FontPath	"/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
	FontPath	"/usr/share/fonts/X11/75dpi/:unscaled"
	FontPath	"/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
	FontPath	"/usr/share/fonts/X11/Type1"
	FontPath	"/usr/X11R6/lib/X11/fonts/Type1"
	FontPath	"/usr/share/fonts/X11/100dpi"
	FontPath	"/usr/X11R6/lib/X11/fonts/100dpi"
	FontPath	"/usr/share/fonts/X11/75dpi"
	FontPath	"/usr/X11R6/lib/X11/fonts/75dpi"
	# path to defoma fonts
	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load	"i2c"
	Load	"bitmap"
	Load	"ddc"
	Load	"dri"
	Load	"extmod"
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"vbe"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"pl"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ImPS/2"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "Device"
	Identifier	"ATI Technologies Inc RV350 AS [Radeon 9550]"
	Driver		"ati"
	BusID		"PCI:1:0:0"
EndSection

Section "Monitor"
	Identifier	"L1952S"
	Option		"DPMS"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"ATI Technologies Inc RV350 AS [Radeon 9550]"
	Monitor		"L1952S"
	DefaultDepth	24
	SubSection "Display"
		Depth		1
		Modes		"1280x1024" "1024x768" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1280x1024" "1024x768" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1280x1024" "1024x768" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1280x1024" "1024x768" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1280x1024" "1024x768" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1280x1024" "1024x768" "800x600" "720x400" "640x480"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
EndSection

Section "DRI"
	Mode	0666
EndSection

Gnome/KDE FC4/FC5
wifi Repotec RP-WP0854
11GB Ralink RT 2500
Rt 2560F-chipset
mlyczek
Junior Member
Posty: 979
Rejestracja: 02 sierpnia 2006, 19:17

Post autor: mlyczek »

Kod: Zaznacz cały

HorizSync       30-70
VertRefresh     50-160
Dodaj do sekcji "Monitor" te dwie linijki, ale podaj wartości takie jak masz w instrukcji do monitora.
Rady
Posty: 87
Rejestracja: 20 kwietnia 2007, 11:57

Post autor: Rady »

Kod: Zaznacz cały

Section "Monitor"
	Identifier	"L1952S"
	Option		"DPMS"
	HorizSync      30-83
	VertRefresh    56-75
I dalej to samo tens sam komunikat out of range i zwisy
velmafia
Member
Posty: 1820
Rejestracja: 01 września 2006, 00:56
Lokalizacja: Las

Post autor: velmafia »

Rady, może zapodaj logami
Rady
Posty: 87
Rejestracja: 20 kwietnia 2007, 11:57

Post autor: Rady »

Oki zapodaje wyszłem z x-ów podczas zwisu i skopiowałem logi Xorg.0.log


Daje załącznik bo tego straszni dużo jest
daris
Beginner
Posty: 304
Rejestracja: 30 marca 2007, 21:00

Post autor: daris »

OUT OF RANGE 36,8 kHZ/82 Hz
To OUT OF RANGE zapamiętałem z windowsa (xp) - pojawiało się podczas ładowania (tak jak ten pasek zasuwa) i wystarczyło wyłączyć i włączyć monitor. Nie wiem po co to piszę ale może się przyda.

Też na radku (9600)
Kaka'
Senior Member
Posty: 3018
Rejestracja: 30 lipca 2006, 13:17
Lokalizacja: Kartuzy

Post autor: Kaka' »

Mnie ten log za dużo nie mówi, ale... Tak patrzę i jest tam napisane, że ładowany jest AIGLX - kiedy w xorg.conf nic o tym nie masz. Dziwna sprawa...
velmafia
Member
Posty: 1820
Rejestracja: 01 września 2006, 00:56
Lokalizacja: Las

Post autor: velmafia »

1. Rady, na innych sterach jest ten sam problem?
2. doinstalowałeś potrzebne pakiety do sterów otwartych?
3. na jakiej rozdzielczości jedziesz (wiem, jest zapisane w xorgu, jednak nie zawsze jest tak samo)?


po przepuszczeniu Twoich logów przez poniższe polecenie zanajduję takie błędy, jednak nie do końca potrafię je zrozumieć:

Kod: Zaznacz cały

kamil@kamil:~$ cat downloads/Xorglog.txt | grep WW
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(WW) The directory "/usr/X11R6/lib/X11/fonts/misc" does not exist.
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
(WW) The directory "/usr/X11R6/lib/X11/fonts/cyrillic" does not exist.
(WW) The directory "/usr/X11R6/lib/X11/fonts/100dpi/" does not exist.
(WW) The directory "/usr/X11R6/lib/X11/fonts/75dpi/" does not exist.
(WW) The directory "/usr/X11R6/lib/X11/fonts/Type1" does not exist.
(WW) The directory "/usr/X11R6/lib/X11/fonts/100dpi" does not exist.
(WW) The directory "/usr/X11R6/lib/X11/fonts/75dpi" does not exist.
(WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
(WW) RADEON: No matching Device section for instance (BusID PCI:1:0:1) found
(WW) RADEON(0): Failed to detect secondary monitor, MergedFB/Clone mode disabled
(WW) RADEON(0): config file vrefresh range 50-75Hz not within DDC vrefresh ranges.
(WW) (1280x960,L1952S) mode clock 148.5MHz exceeds DDC maximum 140MHz
(WW) (1280x1024,L1952S) mode clock 157.5MHz exceeds DDC maximum 140MHz
(WW) (1600x1200,L1952S) mode clock 162MHz exceeds DDC maximum 140MHz
(WW) (1600x1200,L1952S) mode clock 175.5MHz exceeds DDC maximum 140MHz
(WW) (1600x1200,L1952S) mode clock 189MHz exceeds DDC maximum 140MHz
(WW) (1600x1200,L1952S) mode clock 202.5MHz exceeds DDC maximum 140MHz
(WW) (1600x1200,L1952S) mode clock 229.5MHz exceeds DDC maximum 140MHz
(WW) (1792x1344,L1952S) mode clock 204.8MHz exceeds DDC maximum 140MHz
(WW) (1792x1344,L1952S) mode clock 261MHz exceeds DDC maximum 140MHz
(WW) (1856x1392,L1952S) mode clock 218.3MHz exceeds DDC maximum 140MHz
(WW) (1856x1392,L1952S) mode clock 288MHz exceeds DDC maximum 140MHz
(WW) (1920x1440,L1952S) mode clock 234MHz exceeds DDC maximum 140MHz
(WW) (1920x1440,L1952S) mode clock 297MHz exceeds DDC maximum 140MHz
(WW) (1400x1050,L1952S) mode clock 151MHz exceeds DDC maximum 140MHz
(WW) (1400x1050,L1952S) mode clock 155.8MHz exceeds DDC maximum 140MHz
(WW) (1400x1050,L1952S) mode clock 184MHz exceeds DDC maximum 140MHz
(WW) (1680x1050,L1952S) mode clock 147.14MHz exceeds DDC maximum 140MHz
(WW) (1920x1200,L1952S) mode clock 193.16MHz exceeds DDC maximum 140MHz
(WW) (1920x1200,L1952S) mode clock 230MHz exceeds DDC maximum 140MHz
(WW) (1920x1440,L1952S) mode clock 341.35MHz exceeds DDC maximum 140MHz
(WW) (2048x1536,L1952S) mode clock 266.95MHz exceeds DDC maximum 140MHz
(WW) (2048x1536,L1952S) mode clock 340.48MHz exceeds DDC maximum 140MHz
(WW) (2048x1536,L1952S) mode clock 388.04MHz exceeds DDC maximum 140MHz
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0):   MC_FB_LOCATION  was: 0xe7ffe000 is: 0xe7ffe000
(WW) RADEON(0):   MC_AGP_LOCATION was: 0xffffffc0 is: 0xf07ff000
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
może ktoś inny będzie umiał z nich coś wyciągnąć?
Rady
Posty: 87
Rejestracja: 20 kwietnia 2007, 11:57

Post autor: Rady »

1280/1024 ale na niższych tez to samo sterowniki otwarte na ati podczas konfiguracji xorg sam wykrywa kartę grafiki wiec chyba instaluje odpowiednie pakiety jeśli nie to które pakiety d instalować ???
velmafia
Member
Posty: 1820
Rejestracja: 01 września 2006, 00:56
Lokalizacja: Las

Post autor: velmafia »

Rady pisze:które pakiety d instalować ???
ja mam takie u siebie:

Kod: Zaznacz cały

kamil@kamil:~$ dpkg -l | grep mesa
ii  libgl1-mesa-dev                   6.5.2-4                         A free implementation of the OpenGL API -- G
ii  libgl1-mesa-dri                   6.5.2-4                         A free implementation of the OpenGL API -- D
ii  libgl1-mesa-glx                   6.5.2-4                         A free implementation of the OpenGL API -- G
ii  libglu1-mesa                      6.5.2-4                         The OpenGL utility library (GLU)
ii  libglu1-mesa-dev                  6.5.2-4                         The OpenGL utility library -- development su
ii  mesa-common-dev                   6.5.2-4                         Developer documentation for Mesa
ii  mesa-utils                        6.5.2-4                         Miscellaneous Mesa GL utilities
ii  xlibmesa-dri                      7.1.0-18                        transitional package for Debian etch
ii  xlibmesa-glu                      7.1.0-18                        transitional package for Debian etch

aloha
ODPOWIEDZ