Teraz jest w porządku. Pliku xorg.conf nie twórz, tworzy się go tylko gdy Nvidia jest jedyną kartą graficzną.
PS To bez związku z tym wątkiem, ale brakuje Ci firmware – jest w pakiecie firmware-realtek.
[+] Gnome Shell nie dzia
Kod: Zaznacz cały
gedit /var/log/Xorg.0.log
Kod: Zaznacz cały
[ 19.271]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 19.271] X Protocol Version 11, Revision 0
[ 19.271] Build Operating System: Linux 3.11-2-amd64 x86_64 Debian
[ 19.271] Current Operating System: Linux Jotus 3.2.0-4-amd64 #1 SMP Debian 3.2.57-3+deb7u1 x86_64
[ 19.271] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=34ec43e0-6f07-469a-b1b4-f758bdbe0364 ro quiet
[ 19.272] Build Date: 17 December 2013 07:37:58PM
[ 19.272] xorg-server 2:1.12.4-6+deb7u2 (Julien Cristau <jcristau@debian.org>)
[ 19.272] Current version of pixman: 0.26.0
[ 19.272] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 19.272] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 19.272] (==) Log file: "/var/log/Xorg.0.log", Time: Wed May 28 23:21:51 2014
[ 19.326] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 19.344] (==) No Layout section. Using the first Screen section.
[ 19.344] (==) No screen section available. Using defaults.
[ 19.344] (**) |-->Screen "Default Screen Section" (0)
[ 19.344] (**) | |-->Monitor "<default monitor>"
[ 19.344] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 19.344] (==) Automatically adding devices
[ 19.344] (==) Automatically enabling devices
[ 19.388] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 19.388] Entry deleted from font path.
[ 19.451] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 19.451] Entry deleted from font path.
[ 19.451] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 19.451] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 19.451] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 19.451] (II) Loader magic: 0x7f5baa627ae0
[ 19.451] (II) Module ABI versions:
[ 19.451] X.Org ANSI C Emulation: 0.4
[ 19.451] X.Org Video Driver: 12.1
[ 19.451] X.Org XInput driver : 16.0
[ 19.451] X.Org Server Extension : 6.0
[ 19.452] (--) PCI:*(0:0:2:0) 8086:0166:1043:124d rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 19.452] (II) Open ACPI successful (/var/run/acpid.socket)
[ 19.452] (II) LoadModule: "extmod"
[ 19.489] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 19.499] (II) Module extmod: vendor="X.Org Foundation"
[ 19.499] compiled for 1.12.4, module version = 1.0.0
[ 19.499] Module class: X.Org Server Extension
[ 19.499] ABI class: X.Org Server Extension, version 6.0
[ 19.499] (II) Loading extension SELinux
[ 19.500] (II) Loading extension MIT-SCREEN-SAVER
[ 19.500] (II) Loading extension XFree86-VidModeExtension
[ 19.500] (II) Loading extension XFree86-DGA
[ 19.500] (II) Loading extension DPMS
[ 19.500] (II) Loading extension XVideo
[ 19.500] (II) Loading extension XVideo-MotionCompensation
[ 19.500] (II) Loading extension X-Resource
[ 19.500] (II) LoadModule: "dbe"
[ 19.500] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 19.508] (II) Module dbe: vendor="X.Org Foundation"
[ 19.508] compiled for 1.12.4, module version = 1.0.0
[ 19.508] Module class: X.Org Server Extension
[ 19.508] ABI class: X.Org Server Extension, version 6.0
[ 19.508] (II) Loading extension DOUBLE-BUFFER
[ 19.508] (II) LoadModule: "glx"
[ 19.508] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[ 20.215] (II) Module glx: vendor="NVIDIA Corporation"
[ 20.215] compiled for 4.0.2, module version = 1.0.0
[ 20.215] Module class: X.Org Server Extension
[ 20.215] (II) NVIDIA GLX Module 319.82 Sun Dec 29 23:17:58 PST 2013
[ 20.229] (II) Loading extension GLX
[ 20.229] (II) LoadModule: "record"
[ 20.230] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 20.240] (II) Module record: vendor="X.Org Foundation"
[ 20.240] compiled for 1.12.4, module version = 1.13.0
[ 20.240] Module class: X.Org Server Extension
[ 20.240] ABI class: X.Org Server Extension, version 6.0
[ 20.240] (II) Loading extension RECORD
[ 20.240] (II) LoadModule: "dri"
[ 20.241] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 20.257] (II) Module dri: vendor="X.Org Foundation"
[ 20.257] compiled for 1.12.4, module version = 1.0.0
[ 20.257] ABI class: X.Org Server Extension, version 6.0
[ 20.257] (II) Loading extension XFree86-DRI
[ 20.257] (II) LoadModule: "dri2"
[ 20.258] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 20.258] (II) Module dri2: vendor="X.Org Foundation"
[ 20.258] compiled for 1.12.4, module version = 1.2.0
[ 20.258] ABI class: X.Org Server Extension, version 6.0
[ 20.258] (II) Loading extension DRI2
[ 20.258] (==) Matched intel as autoconfigured driver 0
[ 20.258] (==) Matched vesa as autoconfigured driver 1
[ 20.258] (==) Matched fbdev as autoconfigured driver 2
[ 20.258] (==) Assigned the driver to the xf86ConfigLayout
[ 20.258] (II) LoadModule: "intel"
[ 20.276] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 20.310] (II) Module intel: vendor="X.Org Foundation"
[ 20.310] compiled for 1.12.3.902, module version = 2.19.0
[ 20.310] Module class: X.Org Video Driver
[ 20.310] ABI class: X.Org Video Driver, version 12.1
[ 20.310] (II) LoadModule: "vesa"
[ 20.310] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 20.321] (II) Module vesa: vendor="X.Org Foundation"
[ 20.321] compiled for 1.12.1, module version = 2.3.1
[ 20.321] Module class: X.Org Video Driver
[ 20.321] ABI class: X.Org Video Driver, version 12.0
[ 20.321] (II) LoadModule: "fbdev"
[ 20.321] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 20.332] (II) Module fbdev: vendor="X.Org Foundation"
[ 20.332] compiled for 1.12.1, module version = 0.4.2
[ 20.332] ABI class: X.Org Video Driver, version 12.0
[ 20.332] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2)
[ 20.333] (II) VESA: driver for VESA chipsets: vesa
[ 20.333] (II) FBDEV: driver for framebuffer: fbdev
[ 20.333] (++) using VT number 7
[ 20.339] (WW) Falling back to old probe method for vesa
[ 20.339] (WW) Falling back to old probe method for fbdev
[ 20.339] (II) Loading sub module "fbdevhw"
[ 20.339] (II) LoadModule: "fbdevhw"
[ 20.339] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 20.350] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 20.350] compiled for 1.12.4, module version = 0.0.2
[ 20.351] ABI class: X.Org Video Driver, version 12.1
[ 20.351] drmOpenDevice: node name is /dev/dri/card0
[ 20.351] drmOpenDevice: open result is 9, (OK)
[ 20.351] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 20.351] drmOpenDevice: node name is /dev/dri/card0
[ 20.351] drmOpenDevice: open result is 9, (OK)
[ 20.351] drmOpenByBusid: drmOpenMinor returns 9
[ 20.351] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 20.351] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 20.351] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 20.351] (==) intel(0): RGB weight 888
[ 20.351] (==) intel(0): Default visual is TrueColor
[ 20.351] (II) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
[ 20.351] (--) intel(0): Chipset: "Ivybridge Mobile (GT2)"
[ 20.351] (**) intel(0): Relaxed fencing enabled
[ 20.351] (**) intel(0): Wait on SwapBuffers? enabled
[ 20.351] (**) intel(0): Triple buffering? enabled
[ 20.351] (**) intel(0): Framebuffer tiled
[ 20.351] (**) intel(0): Pixmaps tiled
[ 20.351] (**) intel(0): 3D buffers tiled
[ 20.351] (**) intel(0): SwapBuffers wait enabled
[ 20.351] (==) intel(0): video overlay key set to 0x101fe
[ 20.351] (II) intel(0): Output LVDS1 has no monitor section
[ 20.352] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video1
[ 20.352] (II) intel(0): Output VGA1 has no monitor section
[ 20.352] (II) intel(0): Output HDMI1 has no monitor section
[ 20.400] (II) intel(0): Output DP1 has no monitor section
[ 20.400] (II) intel(0): EDID for output LVDS1
[ 20.400] (II) intel(0): Manufacturer: LGD Model: 3db Serial#: 0
[ 20.400] (II) intel(0): Year: 2012 Week: 0
[ 20.400] (II) intel(0): EDID Version: 1.3
[ 20.400] (II) intel(0): Digital Display Input
[ 20.400] (II) intel(0): Max Image Size [cm]: horiz.: 35 vert.: 19
[ 20.400] (II) intel(0): Gamma: 2.20
[ 20.400] (II) intel(0): No DPMS capabilities specified
[ 20.400] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 20.400] (II) intel(0): First detailed timing is preferred mode
[ 20.400] (II) intel(0): redX: 0.578 redY: 0.344 greenX: 0.337 greenY: 0.571
[ 20.400] (II) intel(0): blueX: 0.159 blueY: 0.120 whiteX: 0.313 whiteY: 0.329
[ 20.400] (II) intel(0): Manufacturer's mask: 0
[ 20.400] (II) intel(0): Supported detailed timing:
[ 20.400] (II) intel(0): clock: 76.8 MHz Image Size: 345 x 194 mm
[ 20.400] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1618 h_border: 0
[ 20.400] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 776 v_blanking: 790 v_border: 0
[ 20.400] (II) intel(0): LG Display
[ 20.400] (II) intel(0): LP156WH3-TLT1
[ 20.400] (II) intel(0): EDID (in hex):
[ 20.400] (II) intel(0): 00ffffffffffff0030e4db0300000000
[ 20.400] (II) intel(0): 00160103802313780a05f59458569228
[ 20.400] (II) intel(0): 1e505400000001010101010101010101
[ 20.400] (II) intel(0): 010101010101fb1d56fc500016303020
[ 20.400] (II) intel(0): 350059c2100000190000000000000000
[ 20.401] (II) intel(0): 00000000000000000000000000fe004c
[ 20.401] (II) intel(0): 4720446973706c61790a2020000000fe
[ 20.401] (II) intel(0): 004c503135365748332d544c54310006
[ 20.401] (II) intel(0): EDID vendor "LGD", prod id 987
[ 20.401] (II) intel(0): Printing DDC gathered Modelines:
[ 20.401] (II) intel(0): Modeline "1366x768"x0.0 76.75 1366 1414 1446 1618 768 771 776 790 -hsync -vsync (47.4 kHz eP)
[ 20.401] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 20.401] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 20.401] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 20.401] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 20.401] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 20.401] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 20.401] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 20.401] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 20.401] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 20.401] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 20.401] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[ 20.401] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 20.401] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 20.401] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 20.401] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[ 20.401] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[ 20.401] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 20.401] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 20.401] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[ 20.401] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[ 20.401] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 20.401] (II) intel(0): Printing probed modes for output LVDS1
[ 20.401] (II) intel(0): Modeline "1366x768"x60.0 76.75 1366 1414 1446 1618 768 771 776 790 -hsync -vsync (47.4 kHz eP)
[ 20.401] (II) intel(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz d)
[ 20.401] (II) intel(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz d)
[ 20.401] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 20.401] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 20.401] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 20.401] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 20.402] (II) intel(0): EDID for output VGA1
[ 20.402] (II) intel(0): EDID for output HDMI1
[ 20.452] (II) intel(0): EDID for output DP1
[ 20.452] (II) intel(0): Output LVDS1 connected
[ 20.452] (II) intel(0): Output VGA1 disconnected
[ 20.452] (II) intel(0): Output HDMI1 disconnected
[ 20.452] (II) intel(0): Output DP1 disconnected
[ 20.452] (II) intel(0): Using exact sizes for initial modes
[ 20.452] (II) intel(0): Output LVDS1 using initial mode 1366x768
[ 20.452] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 20.452] (II) intel(0): Kernel page flipping support detected, enabling
[ 20.452] (**) intel(0): Display dimensions: (350, 190) mm
[ 20.452] (**) intel(0): DPI set to (99, 102)
[ 20.452] (II) Loading sub module "fb"
[ 20.452] (II) LoadModule: "fb"
[ 20.452] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 20.453] (II) Module fb: vendor="X.Org Foundation"
[ 20.453] compiled for 1.12.4, module version = 1.0.0
[ 20.453] ABI class: X.Org ANSI C Emulation, version 0.4
[ 20.453] (II) Loading sub module "dri2"
[ 20.453] (II) LoadModule: "dri2"
[ 20.454] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 20.454] (II) Module dri2: vendor="X.Org Foundation"
[ 20.454] compiled for 1.12.4, module version = 1.2.0
[ 20.454] ABI class: X.Org Server Extension, version 6.0
[ 20.454] (II) UnloadModule: "vesa"
[ 20.454] (II) Unloading vesa
[ 20.454] (II) UnloadModule: "fbdev"
[ 20.454] (II) Unloading fbdev
[ 20.454] (II) UnloadSubModule: "fbdevhw"
[ 20.454] (II) Unloading fbdevhw
[ 20.454] (==) Depth 24 pixmap format is 32 bpp
[ 20.454] (II) intel(0): [DRI2] Setup complete
[ 20.454] (II) intel(0): [DRI2] DRI driver: i965
[ 20.454] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[ 20.457] (II) UXA(0): Driver registered support for the following operations:
[ 20.457] (II) solid
[ 20.457] (II) copy
[ 20.457] (II) composite (RENDER acceleration)
[ 20.457] (II) put_image
[ 20.457] (II) get_image
[ 20.457] (==) intel(0): Backing store disabled
[ 20.457] (==) intel(0): Silken mouse enabled
[ 20.457] (II) intel(0): Initializing HW Cursor
[ 20.457] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 20.459] (==) intel(0): DPMS enabled
[ 20.459] (==) intel(0): Intel XvMC decoder enabled
[ 20.460] (II) intel(0): Set up textured video
[ 20.460] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 20.460] (II) intel(0): direct rendering: DRI2 Enabled
[ 20.460] (==) intel(0): hotplug detection: "enabled"
[ 20.528] (--) RandR disabled
[ 20.528] (II) Initializing built-in extension Generic Event Extension
[ 20.528] (II) Initializing built-in extension SHAPE
[ 20.528] (II) Initializing built-in extension MIT-SHM
[ 20.528] (II) Initializing built-in extension XInputExtension
[ 20.528] (II) Initializing built-in extension XTEST
[ 20.528] (II) Initializing built-in extension BIG-REQUESTS
[ 20.528] (II) Initializing built-in extension SYNC
[ 20.528] (II) Initializing built-in extension XKEYBOARD
[ 20.528] (II) Initializing built-in extension XC-MISC
[ 20.528] (II) Initializing built-in extension SECURITY
[ 20.528] (II) Initializing built-in extension XINERAMA
[ 20.528] (II) Initializing built-in extension XFIXES
[ 20.528] (II) Initializing built-in extension RENDER
[ 20.528] (II) Initializing built-in extension RANDR
[ 20.528] (II) Initializing built-in extension COMPOSITE
[ 20.528] (II) Initializing built-in extension DAMAGE
[ 20.528] (II) SELinux: Disabled on system
[ 20.542] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
[ 20.553] (II) intel(0): Setting screen physical size to 361 x 203
[ 20.882] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 20.882] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 20.882] (II) LoadModule: "evdev"
[ 20.882] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 20.897] (II) Module evdev: vendor="X.Org Foundation"
[ 20.897] compiled for 1.12.1, module version = 2.7.0
[ 20.897] Module class: X.Org XInput Driver
[ 20.897] ABI class: X.Org XInput driver, version 16.0
[ 20.897] (II) Using input driver 'evdev' for 'Power Button'
[ 20.897] (**) Power Button: always reports core events
[ 20.897] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 20.897] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 20.897] (--) evdev: Power Button: Found keys
[ 20.897] (II) evdev: Power Button: Configuring as keyboard
[ 20.897] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 20.897] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 20.897] (**) Option "xkb_rules" "evdev"
[ 20.897] (**) Option "xkb_model" "pc105"
[ 20.897] (**) Option "xkb_layout" "pl"
[ 20.937] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[ 20.937] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 20.937] (II) Using input driver 'evdev' for 'Video Bus'
[ 20.937] (**) Video Bus: always reports core events
[ 20.937] (**) evdev: Video Bus: Device: "/dev/input/event9"
[ 20.937] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 20.937] (--) evdev: Video Bus: Found keys
[ 20.937] (II) evdev: Video Bus: Configuring as keyboard
[ 20.937] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input9/event9"
[ 20.937] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 20.937] (**) Option "xkb_rules" "evdev"
[ 20.937] (**) Option "xkb_model" "pc105"
[ 20.937] (**) Option "xkb_layout" "pl"
[ 20.938] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[ 20.938] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 20.938] (II) Using input driver 'evdev' for 'Video Bus'
[ 20.938] (**) Video Bus: always reports core events
[ 20.938] (**) evdev: Video Bus: Device: "/dev/input/event8"
[ 20.938] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 20.938] (--) evdev: Video Bus: Found keys
[ 20.938] (II) evdev: Video Bus: Configuring as keyboard
[ 20.938] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input8/event8"
[ 20.938] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 20.938] (**) Option "xkb_rules" "evdev"
[ 20.938] (**) Option "xkb_model" "pc105"
[ 20.938] (**) Option "xkb_layout" "pl"
[ 20.939] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 20.939] (II) No input driver specified, ignoring this device.
[ 20.939] (II) This device may have been added with another device file.
[ 20.939] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 20.939] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 20.939] (II) Using input driver 'evdev' for 'Sleep Button'
[ 20.939] (**) Sleep Button: always reports core events
[ 20.939] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[ 20.939] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 20.939] (--) evdev: Sleep Button: Found keys
[ 20.939] (II) evdev: Sleep Button: Configuring as keyboard
[ 20.939] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event3"
[ 20.939] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 20.939] (**) Option "xkb_rules" "evdev"
[ 20.939] (**) Option "xkb_model" "pc105"
[ 20.939] (**) Option "xkb_layout" "pl"
[ 20.940] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/event1)
[ 20.940] (**) USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
[ 20.940] (II) Using input driver 'evdev' for 'USB OPTICAL MOUSE'
[ 20.940] (**) USB OPTICAL MOUSE: always reports core events
[ 20.940] (**) evdev: USB OPTICAL MOUSE: Device: "/dev/input/event1"
[ 20.940] (--) evdev: USB OPTICAL MOUSE: Vendor 0x93a Product 0x2521
[ 20.940] (--) evdev: USB OPTICAL MOUSE: Found 9 mouse buttons
[ 20.940] (--) evdev: USB OPTICAL MOUSE: Found scroll wheel(s)
[ 20.940] (--) evdev: USB OPTICAL MOUSE: Found relative axes
[ 20.940] (--) evdev: USB OPTICAL MOUSE: Found x and y relative axes
[ 20.940] (II) evdev: USB OPTICAL MOUSE: Configuring as mouse
[ 20.940] (II) evdev: USB OPTICAL MOUSE: Adding scrollwheel support
[ 20.940] (**) evdev: USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
[ 20.940] (**) evdev: USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 20.940] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/input/input1/event1"
[ 20.940] (II) XINPUT: Adding extended input device "USB OPTICAL MOUSE" (type: MOUSE, id 10)
[ 20.941] (II) evdev: USB OPTICAL MOUSE: initialized for relative axes.
[ 20.941] (**) USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
[ 20.941] (**) USB OPTICAL MOUSE: (accel) acceleration profile 0
[ 20.941] (**) USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[ 20.941] (**) USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[ 20.941] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/mouse0)
[ 20.941] (II) No input driver specified, ignoring this device.
[ 20.941] (II) This device may have been added with another device file.
[ 20.942] (II) config/udev: Adding input device USB2.0 UVC HD Webcam (/dev/input/event10)
[ 20.942] (**) USB2.0 UVC HD Webcam: Applying InputClass "evdev keyboard catchall"
[ 20.942] (II) Using input driver 'evdev' for 'USB2.0 UVC HD Webcam'
[ 20.942] (**) USB2.0 UVC HD Webcam: always reports core events
[ 20.942] (**) evdev: USB2.0 UVC HD Webcam: Device: "/dev/input/event10"
[ 20.942] (--) evdev: USB2.0 UVC HD Webcam: Vendor 0x13d3 Product 0x5188
[ 20.942] (--) evdev: USB2.0 UVC HD Webcam: Found keys
[ 20.942] (II) evdev: USB2.0 UVC HD Webcam: Configuring as keyboard
[ 20.942] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input10/event10"
[ 20.942] (II) XINPUT: Adding extended input device "USB2.0 UVC HD Webcam" (type: KEYBOARD, id 11)
[ 20.942] (**) Option "xkb_rules" "evdev"
[ 20.942] (**) Option "xkb_model" "pc105"
[ 20.942] (**) Option "xkb_layout" "pl"
[ 20.943] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event11)
[ 20.943] (II) No input driver specified, ignoring this device.
[ 20.943] (II) This device may have been added with another device file.
[ 20.943] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event12)
[ 20.943] (II) No input driver specified, ignoring this device.
[ 20.943] (II) This device may have been added with another device file.
[ 20.943] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event7)
[ 20.943] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 20.943] (II) Using input driver 'evdev' for 'Asus WMI hotkeys'
[ 20.943] (**) Asus WMI hotkeys: always reports core events
[ 20.943] (**) evdev: Asus WMI hotkeys: Device: "/dev/input/event7"
[ 20.943] (--) evdev: Asus WMI hotkeys: Vendor 0 Product 0
[ 20.943] (--) evdev: Asus WMI hotkeys: Found keys
[ 20.944] (II) evdev: Asus WMI hotkeys: Configuring as keyboard
[ 20.944] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input7/event7"
[ 20.944] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 12)
[ 20.944] (**) Option "xkb_rules" "evdev"
[ 20.944] (**) Option "xkb_model" "pc105"
[ 20.944] (**) Option "xkb_layout" "pl"
[ 20.945] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 20.945] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 20.945] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 20.945] (**) AT Translated Set 2 keyboard: always reports core events
[ 20.945] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 20.945] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 20.945] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 20.945] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 20.945] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 20.945] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[ 20.945] (**) Option "xkb_rules" "evdev"
[ 20.945] (**) Option "xkb_model" "pc105"
[ 20.945] (**) Option "xkb_layout" "pl"
[ 20.946] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event6)
[ 20.946] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 20.946] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[ 20.946] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[ 20.946] (II) LoadModule: "synaptics"
[ 20.946] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 20.969] (II) Module synaptics: vendor="X.Org Foundation"
[ 20.969] compiled for 1.12.4, module version = 1.6.2
[ 20.969] Module class: X.Org XInput Driver
[ 20.969] ABI class: X.Org XInput driver, version 16.0
[ 20.969] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[ 20.969] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 20.969] (**) Option "Device" "/dev/input/event6"
[ 21.080] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 3249
[ 21.080] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 2223
[ 21.080] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[ 21.080] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[ 21.080] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
[ 21.080] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[ 21.080] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 21.080] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 21.088] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input6/event6"
[ 21.088] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 14)
[ 21.088] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 21.088] (**) synaptics: ETPS/2 Elantech Touchpad: MaxSpeed is now 1.75
[ 21.088] (**) synaptics: ETPS/2 Elantech Touchpad: AccelFactor is now 0.051
[ 21.088] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[ 21.088] (**) ETPS/2 Elantech Touchpad: (accel) accelerationKod: Zaznacz cały
update-alternatives --config glxKod: Zaznacz cały
root@Jotus:/home/wojo44# update-alternatives --config glx
Są 2 dostępne alternatywy dla glx (dostarczające /usr/lib/glx).
Wybór Ścieżka Priorytet Status
------------------------------------------------------------
* 0 /usr/lib/nvidia 100 tryb auto
1 /usr/lib/mesa-diverted 5 tryb ręczny
2 /usr/lib/nvidia 100 tryb ręczny
Proszę wcisnąć Enter, aby pozostawić bieżący wybór
[*]; albo wpisać wybrany numer:
Ok, super dzięki!! 
GNOME 3 wróciło na swoje miejsce. Teraz czy mógłbyś mi jeszcze wytłumaczyć, czy funkcjonowanie tego polecenia optirun z programu bumblebee jest prawidłowe, wpisałem:
nie wiem czy to tak powinno działać, że uruchamia mi vlc w konsoli.
GNOME 3 wróciło na swoje miejsce. Teraz czy mógłbyś mi jeszcze wytłumaczyć, czy funkcjonowanie tego polecenia optirun z programu bumblebee jest prawidłowe, wpisałem:Kod: Zaznacz cały
wojo44@Jotus:~$ optirun vlc
VLC media player 2.0.6 Twoflower (revision 2.0.6-0-gbe9623c)
[0x1757108] main libvlc: Uruchamianie vlc z domyślnym interfejsem. Użyj 'cvlc' aby używać vlc bez interfejsu.
../../../include/vlc_xlib.h:46:vlc_xlib_init: Xlib not initialized for threads.
This process is probably using LibVLC incorrectly.
Pass "--no-xlib" to libvlc_new() to fix this.
[0x1997c88] qt4 interface error: Xlib not initialized for threads
../../../include/vlc_xlib.h:46:vlc_xlib_init: Xlib not initialized for threads.
This process is probably using LibVLC incorrectly.
Pass "--no-xlib" to libvlc_new() to fix this.
[0x1997c88] skins2 interface error: Xlib not initialized for threads
[0x1997c88] skins2 interface error: initializing xlib for multi-threading failed
[0x1997c88] skins2 interface error: cannot initialize OSFactory
[0x1997c88] [cli] lua interface: Listening on host "*console".
VLC media player 2.0.6 Twoflower
Command Line Interface initialized. Type `help' for help.
>
nie wiem czy to tak powinno działać, że uruchamia mi vlc w konsoli.
Teraz już tak, i wrócił stary problem.
tylko, że zgodnie z instrukcją https://wiki.debian.org/Bumblebee w pliku /etc/bumblebee/bumblebee.conf jest już zapisane KernelDriver=nvidia-current
Kod: Zaznacz cały
wojo44@Jotus:~$ optirun vlc
[ 537.517300] [ERROR]Cannot access secondary GPU - error: Could not load GPU driver
[ 537.517335] [ERROR]Aborting because fallback start is disabled.