Jestem połączony z siecią przez wvdial, włączyłem logowanie w usb_modeswitch.
Kod: Zaznacz cały
# dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-15) ) #1 SMP Debian 3.2.39-2
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfff0000 (usable)
[ 0.000000] BIOS-e820: 00000000bfff0000 - 00000000bfff8000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfff8000 - 00000000c0000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] Legacy DMI 0.0 present.
[ 0.000000] DMI: , BIOS
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0xbfff0 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00fc480] fc480
[ 0.000000] initial memory mapped : 0 - 01a00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037800000 page 2M
[ 0.000000] 0037800000 - 00379fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 379fe000 @ 19f9000-1a00000
[ 0.000000] RAMDISK: 36ca4000 - 3764a000
[ 0.000000] ACPI: RSDP 000fa690 00014 (v00 AMI )
[ 0.000000] ACPI: RSDT bfff0000 0002C (v01 AMIINT INTEL875 00000010 MSFT 00000097)
[ 0.000000] ACPI: FACP bfff0030 00081 (v01 AMIINT INTEL875 00000011 MSFT 00000097)
[ 0.000000] ACPI: DSDT bfff0120 036DA (v01 INTEL I875 00001000 MSFT 0100000D)
[ 0.000000] ACPI: FACS bfff8000 00040
[ 0.000000] ACPI: APIC bfff00c0 0005C (v01 AMIINT INTEL875 00000009 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2181MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000379fe
[ 0.000000] HighMem 0x000379fe -> 0x000bfff0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bfff0
[ 0.000000] On node 0 totalpages: 786303
[ 0.000000] free_area_init_node: node 0, pgdat c1412680, node_mem_map f54a4200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1748 pages used for memmap
[ 0.000000] Normal zone: 221994 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4364 pages used for memmap
[ 0.000000] HighMem zone: 554214 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ec00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f79cf000 s33280 r0 d24064 u57344
[ 0.000000] pcpu-alloc: s33280 r0 d24064 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 780159
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-686-pae root=UUID=dbcbf0bf-1a35-4104-b8d2-403a62bdacf4 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000379fe:000bfff0)
[ 0.000000] Memory: 3104548k/3145664k available (2847k kernel code, 40664k reserved, 1352k data, 416k init, 2234312k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
[ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
[ 0.000000] .init : 0xc141a000 - 0xc1482000 ( 416 kB)
[ 0.000000] .data : 0xc12c7d40 - 0xc1419fc0 (1352 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12c7d40 (2847 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f5008000 soft=f500a000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3400.732 MHz processor.
[ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6801.46 BogoMIPS (lpj=13602928)
[ 0.004009] pid_max: default: 32768 minimum: 301
[ 0.004056] Security Framework initialized
[ 0.004064] AppArmor: AppArmor disabled by boot time parameter
[ 0.004083] Mount-cache hash table entries: 512
[ 0.004240] Initializing cgroup subsys cpuacct
[ 0.004247] Initializing cgroup subsys memory
[ 0.004256] Initializing cgroup subsys devices
[ 0.004259] Initializing cgroup subsys freezer
[ 0.004261] Initializing cgroup subsys net_cls
[ 0.004264] Initializing cgroup subsys blkio
[ 0.004271] Initializing cgroup subsys perf_event
[ 0.004307] CPU: Physical Processor ID: 0
[ 0.004309] CPU: Processor Core ID: 0
[ 0.004313] mce: CPU supports 4 MCE banks
[ 0.004324] CPU0: Thermal monitoring enabled (TM1)
[ 0.004776] ACPI: Core revision 20110623
[ 0.006954] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.007285] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.047607] CPU0: Intel(R) Pentium(R) 4 CPU 3.40GHz stepping 09
[ 0.048002] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[ 0.048002] ... version: 0
[ 0.048002] ... bit width: 40
[ 0.048002] ... generic registers: 18
[ 0.048002] ... value mask: 000000ffffffffff
[ 0.048002] ... max period: 0000007fffffffff
[ 0.048002] ... fixed-purpose events: 0
[ 0.048002] ... event mask: 000000000003ffff
[ 0.048002] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.048002] CPU 1 irqstacks, hard=f509a000 soft=f509c000
[ 0.048002] Booting Node 0, Processors #1 Ok.
[ 0.048002] smpboot cpu 1: start_ip = 9b000
[ 0.008000] Initializing CPU#1
[ 0.136050] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.136106] Brought up 2 CPUs
[ 0.136111] Total of 2 processors activated (13602.10 BogoMIPS).
[ 0.136642] devtmpfs: initialized
[ 0.136642] PM: Registering ACPI NVS region at bfff8000 (32768 bytes)
[ 0.136642] print_constraints: dummy:
[ 0.136642] NET: Registered protocol family 16
[ 0.136642] ACPI: bus type pci registered
[ 0.137821] PCI: PCI BIOS revision 2.10 entry at 0xfdb81, last bus=3
[ 0.137824] PCI: Using configuration type 1 for base access
[ 0.140019] bio: create slab <bio-0> at 0
[ 0.140072] ACPI: Added _OSI(Module Device)
[ 0.140072] ACPI: Added _OSI(Processor Device)
[ 0.140072] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.140072] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.140998] ACPI: EC: Look up EC in DSDT
[ 0.144709] ACPI: Interpreter enabled
[ 0.144714] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.144741] ACPI: Using IOAPIC for interrupt routing
[ 0.147148] ACPI: Power Resource [URP1] (off)
[ 0.147201] ACPI: Power Resource [URP2] (off)
[ 0.147257] ACPI: Power Resource [FDDP] (off)
[ 0.147310] ACPI: Power Resource [LPTP] (off)
[ 0.149293] ACPI: No dock devices found.
[ 0.149297] HEST: Table not found.
[ 0.149301] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.149384] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.149530] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.149534] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.149537] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.149540] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.149543] pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xffdfffff]
[ 0.149546] pci_root PNP0A03:00: host bridge window [mem 0xfee01000-0xffdfffff]
[ 0.149550] pci_root PNP0A03:00: host bridge window expanded to [mem 0xc0000000-0xffdfffff]; [mem 0xfee01000-0xffdfffff] ignored
[ 0.149574] pci 0000:00:00.0: [8086:2578] type 0 class 0x000600
[ 0.149578] pci 0000:00:00.0: Enabling MCH 'Overflow' Device
[ 0.149587] pci 0000:00:00.0: reg 10: [mem 0xf0000000-0xf7ffffff pref]
[ 0.149651] pci 0000:00:01.0: [8086:2579] type 1 class 0x000604
[ 0.149686] pci 0000:00:03.0: [8086:257b] type 1 class 0x000604
[ 0.149722] pci 0000:00:06.0: [8086:257e] type 0 class 0x000880
[ 0.149733] pci 0000:00:06.0: reg 10: [mem 0xfecf0000-0xfecf0fff]
[ 0.149807] pci 0000:00:1d.0: [8086:24d2] type 0 class 0x000c03
[ 0.149849] pci 0000:00:1d.0: reg 20: [io 0xcc00-0xcc1f]
[ 0.149885] pci 0000:00:1d.1: [8086:24d4] type 0 class 0x000c03
[ 0.149928] pci 0000:00:1d.1: reg 20: [io 0xd000-0xd01f]
[ 0.149962] pci 0000:00:1d.2: [8086:24d7] type 0 class 0x000c03
[ 0.150004] pci 0000:00:1d.2: reg 20: [io 0xd400-0xd41f]
[ 0.150039] pci 0000:00:1d.3: [8086:24de] type 0 class 0x000c03
[ 0.150081] pci 0000:00:1d.3: reg 20: [io 0xd800-0xd81f]
[ 0.150126] pci 0000:00:1d.7: [8086:24dd] type 0 class 0x000c03
[ 0.150148] pci 0000:00:1d.7: reg 10: [mem 0xffaffc00-0xffafffff]
[ 0.150240] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.150263] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.150306] pci 0000:00:1f.0: [8086:24d0] type 0 class 0x000601
[ 0.150367] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.150393] pci 0000:00:1f.1: [8086:24db] type 0 class 0x000101
[ 0.150407] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.150417] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.150427] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.150437] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.150447] pci 0000:00:1f.1: reg 20: [io 0xfc00-0xfc0f]
[ 0.150457] pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff]
[ 0.150484] pci 0000:00:1f.2: [8086:24d1] type 0 class 0x000101
[ 0.150496] pci 0000:00:1f.2: reg 10: [io 0xec00-0xec07]
[ 0.150505] pci 0000:00:1f.2: reg 14: [io 0xe800-0xe803]
[ 0.150514] pci 0000:00:1f.2: reg 18: [io 0xe400-0xe407]
[ 0.150523] pci 0000:00:1f.2: reg 1c: [io 0xe000-0xe003]
[ 0.150532] pci 0000:00:1f.2: reg 20: [io 0xdc00-0xdc0f]
[ 0.150565] pci 0000:00:1f.3: [8086:24d3] type 0 class 0x000c05
[ 0.150608] pci 0000:00:1f.3: reg 20: [io 0x0c00-0x0c1f]
[ 0.150646] pci 0000:00:1f.5: [8086:24d5] type 0 class 0x000401
[ 0.150661] pci 0000:00:1f.5: reg 10: [io 0xc800-0xc8ff]
[ 0.150670] pci 0000:00:1f.5: reg 14: [io 0xc400-0xc43f]
[ 0.150680] pci 0000:00:1f.5: reg 18: [mem 0xffaffa00-0xffaffbff]
[ 0.150689] pci 0000:00:1f.5: reg 1c: [mem 0xffaff900-0xffaff9ff]
[ 0.150733] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[ 0.150765] pci 0000:01:00.0: [1002:4b4c] type 0 class 0x000300
[ 0.150780] pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xe7ffffff pref]
[ 0.150788] pci 0000:01:00.0: reg 14: [io 0x9800-0x98ff]
[ 0.150797] pci 0000:01:00.0: reg 18: [mem 0xff7f0000-0xff7fffff]
[ 0.150821] pci 0000:01:00.0: reg 30: [mem 0xff7c0000-0xff7dffff pref]
[ 0.150850] pci 0000:01:00.0: supports D1 D2
[ 0.150867] pci 0000:01:00.1: [1002:4b6c] type 0 class 0x000380
[ 0.150880] pci 0000:01:00.1: reg 10: [mem 0xd8000000-0xdfffffff pref]
[ 0.150888] pci 0000:01:00.1: reg 14: [mem 0xff7e0000-0xff7effff]
[ 0.150936] pci 0000:01:00.1: supports D1 D2
[ 0.150975] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.150979] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
[ 0.150983] pci 0000:00:01.0: bridge window [mem 0xff700000-0xff7fffff]
[ 0.150988] pci 0000:00:01.0: bridge window [mem 0xcff00000-0xefefffff pref]
[ 0.151010] pci 0000:02:01.0: [8086:1019] type 0 class 0x000200
[ 0.151024] pci 0000:02:01.0: reg 10: [mem 0xff8e0000-0xff8fffff]
[ 0.151038] pci 0000:02:01.0: reg 18: [io 0xac00-0xac1f]
[ 0.151084] pci 0000:02:01.0: PME# supported from D0 D3hot D3cold
[ 0.151120] pci 0000:00:03.0: PCI bridge to [bus 02-02]
[ 0.151124] pci 0000:00:03.0: bridge window [io 0xa000-0xafff]
[ 0.151128] pci 0000:00:03.0: bridge window [mem 0xff800000-0xff8fffff]
[ 0.151153] pci 0000:03:01.0: [1814:3060] type 0 class 0x000280
[ 0.151169] pci 0000:03:01.0: reg 10: [mem 0xff9f0000-0xff9fffff]
[ 0.151260] pci 0000:03:09.0: [1106:3044] type 0 class 0x000c00
[ 0.151277] pci 0000:03:09.0: reg 10: [mem 0xff9ef800-0xff9effff]
[ 0.151287] pci 0000:03:09.0: reg 14: [io 0xbc00-0xbc7f]
[ 0.151348] pci 0000:03:09.0: supports D2
[ 0.151350] pci 0000:03:09.0: PME# supported from D2 D3hot D3cold
[ 0.151383] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.151388] pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff]
[ 0.151393] pci 0000:00:1e.0: bridge window [mem 0xff900000-0xff9fffff]
[ 0.151399] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.151402] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.151405] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.151408] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.151412] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xffdfffff] (subtractive decode)
[ 0.151426] pci_bus 0000:00: on NUMA node 0
[ 0.151431] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.151525] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.ICHB._PRT]
[ 0.151698] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[ 0.156095] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 0.156158] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.156220] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.156318] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 6 7 10 11 12 14 15)
[ 0.156379] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 0.156443] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.156503] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 0.156601] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 12 14 15)
[ 0.156859] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.156859] vgaarb: loaded
[ 0.156859] vgaarb: bridge control possible 0000:01:00.0
[ 0.156859] PCI: Using ACPI for IRQ routing
[ 0.156859] PCI: pci_cache_line_size set to 64 bytes
[ 0.156859] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.156859] reserve RAM buffer: 00000000bfff0000 - 00000000bfffffff
[ 0.156859] hpet clockevent registered
[ 0.156859] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.156859] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.156859] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.160174] Switching to clocksource hpet
[ 0.162771] pnp: PnP ACPI init
[ 0.162799] ACPI: bus type pnp registered
[ 0.162924] pnp 00:00: [bus 00-ff]
[ 0.162928] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.162931] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.162933] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.162936] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.162939] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.162942] pnp 00:00: [mem 0xc0000000-0xffdfffff window]
[ 0.162945] pnp 00:00: [mem 0xfee01000-0xffdfffff window]
[ 0.163020] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.163120] pnp 00:01: [io 0x0010-0x001f]
[ 0.163123] pnp 00:01: [io 0x0022-0x003f]
[ 0.163126] pnp 00:01: [io 0x0044-0x005f]
[ 0.163128] pnp 00:01: [io 0x0062-0x0063]
[ 0.163131] pnp 00:01: [io 0x0065-0x006f]
[ 0.163133] pnp 00:01: [io 0x0072-0x007f]
[ 0.163136] pnp 00:01: [io 0x0080]
[ 0.163138] pnp 00:01: [io 0x0084-0x0086]
[ 0.163141] pnp 00:01: [io 0x0088]
[ 0.163143] pnp 00:01: [io 0x008c-0x008e]
[ 0.163145] pnp 00:01: [io 0x0090-0x009f]
[ 0.163148] pnp 00:01: [io 0x00a2-0x00bf]
[ 0.163150] pnp 00:01: [io 0x00e0-0x00ef]
[ 0.163153] pnp 00:01: [io 0x0290-0x029f]
[ 0.163155] pnp 00:01: [io 0x03f0-0x03f1]
[ 0.163158] pnp 00:01: [io 0x04d0-0x04d1]
[ 0.163160] pnp 00:01: [io 0x0400-0x043f]
[ 0.163163] pnp 00:01: [io 0x0000-0xffffffffffffffff disabled]
[ 0.163166] pnp 00:01: [mem 0xfed20000-0xfed8ffff]
[ 0.163169] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[ 0.163258] system 00:01: [io 0x0290-0x029f] has been reserved
[ 0.163262] system 00:01: [io 0x03f0-0x03f1] has been reserved
[ 0.163265] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.163269] system 00:01: [io 0x0400-0x043f] has been reserved
[ 0.163273] system 00:01: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.163277] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.163281] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.163295] pnp 00:02: [mem 0xffb00000-0xffbfffff]
[ 0.163334] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.163359] pnp 00:03: [dma 4]
[ 0.163362] pnp 00:03: [io 0x0000-0x000f]
[ 0.163365] pnp 00:03: [io 0x0081-0x0083]
[ 0.163367] pnp 00:03: [io 0x0087]
[ 0.163369] pnp 00:03: [io 0x0089-0x008b]
[ 0.163372] pnp 00:03: [io 0x008f]
[ 0.163374] pnp 00:03: [io 0x00c0-0x00df]
[ 0.163411] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.163425] pnp 00:04: [io 0x0070-0x0071]
[ 0.163441] pnp 00:04: [irq 8]
[ 0.163479] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.163491] pnp 00:05: [io 0x0061]
[ 0.163530] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.163544] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.163550] pnp 00:06: [irq 13]
[ 0.163588] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.163628] pnp 00:07: [irq 12]
[ 0.163677] pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.163702] pnp 00:08: [io 0x0060]
[ 0.163705] pnp 00:08: [io 0x0064]
[ 0.163711] pnp 00:08: [irq 1]
[ 0.163758] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.163841] pnp 00:09: [io 0x03f2-0x03f3]
[ 0.163844] pnp 00:09: [io 0x03f4-0x03f5]
[ 0.163847] pnp 00:09: [io 0x03f7]
[ 0.163853] pnp 00:09: [irq 6]
[ 0.163856] pnp 00:09: [dma 2]
[ 0.163936] pnp 00:09: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.164144] pnp 00:0a: [io 0x03f8-0x03ff]
[ 0.164151] pnp 00:0a: [irq 4]
[ 0.164235] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.164573] pnp 00:0b: [io 0x0378-0x037f]
[ 0.164577] pnp 00:0b: [io 0x0778-0x077b]
[ 0.164582] pnp 00:0b: [irq 7]
[ 0.164585] pnp 00:0b: [dma 3]
[ 0.164700] pnp 00:0b: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.164837] pnp 00:0c: [io 0x0200-0x0207]
[ 0.164890] pnp 00:0c: Plug and Play ACPI device, IDs PNPb02f (active)
[ 0.165151] pnp: PnP ACPI: found 13 devices
[ 0.165154] ACPI: ACPI bus type pnp unregistered
[ 0.165158] PnPBIOS: Disabled by ACPI PNP
[ 0.203484] PCI: max bus depth: 1 pci_try_num: 2
[ 0.203519] pci 0000:00:1f.1: BAR 5: assigned [mem 0xc0000000-0xc00003ff]
[ 0.203526] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.203530] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
[ 0.203536] pci 0000:00:01.0: bridge window [mem 0xff700000-0xff7fffff]
[ 0.203540] pci 0000:00:01.0: bridge window [mem 0xcff00000-0xefefffff pref]
[ 0.203547] pci 0000:00:03.0: PCI bridge to [bus 02-02]
[ 0.203550] pci 0000:00:03.0: bridge window [io 0xa000-0xafff]
[ 0.203555] pci 0000:00:03.0: bridge window [mem 0xff800000-0xff8fffff]
[ 0.203563] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[ 0.203567] pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff]
[ 0.203573] pci 0000:00:1e.0: bridge window [mem 0xff900000-0xff9fffff]
[ 0.203597] pci 0000:00:1e.0: setting latency timer to 64
[ 0.203602] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.203605] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.203608] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.203611] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.203614] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xffdfffff]
[ 0.203617] pci_bus 0000:01: resource 0 [io 0x9000-0x9fff]
[ 0.203620] pci_bus 0000:01: resource 1 [mem 0xff700000-0xff7fffff]
[ 0.203623] pci_bus 0000:01: resource 2 [mem 0xcff00000-0xefefffff pref]
[ 0.203626] pci_bus 0000:02: resource 0 [io 0xa000-0xafff]
[ 0.203629] pci_bus 0000:02: resource 1 [mem 0xff800000-0xff8fffff]
[ 0.203632] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
[ 0.203635] pci_bus 0000:03: resource 1 [mem 0xff900000-0xff9fffff]
[ 0.203638] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.203641] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.203644] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.203647] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.203651] pci_bus 0000:03: resource 8 [mem 0xc0000000-0xffdfffff]
[ 0.203742] NET: Registered protocol family 2
[ 0.203840] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.204257] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.205217] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.205856] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.205860] TCP reno registered
[ 0.205867] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.205895] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.206108] NET: Registered protocol family 1
[ 0.206309] pci 0000:01:00.0: Boot video device
[ 0.206323] PCI: CLS 32 bytes, default 64
[ 0.206410] Unpacking initramfs...
[ 0.515980] Freeing initrd memory: 9880k freed
[ 0.529354] audit: initializing netlink socket (disabled)
[ 0.529372] type=2000 audit(1364667421.524:1): initialized
[ 0.541848] highmem bounce pool size: 64 pages
[ 0.541855] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.542724] VFS: Disk quotas dquot_6.5.2
[ 0.542770] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.542856] msgmni has been set to 1718
[ 0.543124] alg: No test for stdrng (krng)
[ 0.543177] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.543182] io scheduler noop registered
[ 0.543185] io scheduler deadline registered
[ 0.543202] io scheduler cfq registered (default)
[ 0.543370] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.543399] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.543402] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.543736] ERST: Table is not found!
[ 0.543739] GHES: HEST is not enabled!
[ 0.543757] isapnp: Scanning for PnP cards...
[ 0.897446] isapnp: No Plug & Play device found
[ 0.897559] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.917847] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.940572] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.952217] Linux agpgart interface v0.103
[ 0.952507] agpgart-intel 0000:00:00.0: Intel i875 Chipset
[ 0.957426] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
[ 0.957646] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.959954] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.959965] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.960193] mousedev: PS/2 mouse device common for all mice
[ 0.960251] rtc_cmos 00:04: RTC can wake from S4
[ 0.960377] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.960401] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.960417] cpuidle: using governor ladder
[ 0.960420] cpuidle: using governor menu
[ 0.960751] TCP cubic registered
[ 0.960801] NET: Registered protocol family 10
[ 0.961509] Mobile IPv6
[ 0.961513] NET: Registered protocol family 17
[ 0.961519] Registering the dns_resolver key type
[ 0.961551] Using IPI No-Shortcut mode
[ 0.961741] PM: Hibernation image not present or could not be loaded.
[ 0.961757] registered taskstats version 1
[ 0.962397] rtc_cmos 00:04: setting system clock to 2013-03-30 18:17:02 UTC (1364667422)
[ 0.962448] Initializing network drop monitor service
[ 0.962554] Freeing unused kernel memory: 416k freed
[ 0.963047] Write protecting the kernel text: 2848k
[ 0.963103] Write protecting the kernel read-only data: 1092k
[ 0.983159] udevd[49]: starting version 175
[ 0.986363] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.075253] SCSI subsystem initialized
[ 1.098161] usbcore: registered new interface driver usbfs
[ 1.098236] usbcore: registered new interface driver hub
[ 1.112154] usbcore: registered new device driver usb
[ 1.113329] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.113430] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.113439] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.113497] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.113546] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.113795] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 1.113800] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 1.113852] e1000 0000:02:01.0: setting latency timer to 64
[ 1.117039] libata version 3.00 loaded.
[ 1.117430] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.122605] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xffaffc00
[ 1.136087] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.136150] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.136156] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.136161] usb usb1: Product: EHCI Host Controller
[ 1.136165] usb usb1: Manufacturer: Linux 3.2.0-4-686-pae ehci_hcd
[ 1.136169] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.136452] hub 1-0:1.0: USB hub found
[ 1.136468] hub 1-0:1.0: 8 ports detected
[ 1.137624] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.137761] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.137768] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.137806] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.137877] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000cc00
[ 1.137963] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.137968] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.137973] usb usb2: Product: UHCI Host Controller
[ 1.137976] usb usb2: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
[ 1.137980] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.138298] hub 2-0:1.0: USB hub found
[ 1.138308] hub 2-0:1.0: 2 ports detected
[ 1.138498] ata_piix 0000:00:1f.1: version 2.13
[ 1.138526] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[ 1.138627] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.151355] Floppy drive(s): fd0 is 1.44M
[ 1.154850] scsi0 : ata_piix
[ 1.167189] scsi1 : ata_piix
[ 1.170219] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 1.170227] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 1.170321] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.170329] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.170361] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.170417] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d000
[ 1.170495] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.170501] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.170505] usb usb3: Product: UHCI Host Controller
[ 1.170509] usb usb3: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
[ 1.170512] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.170826] hub 3-0:1.0: USB hub found
[ 1.170840] hub 3-0:1.0: 2 ports detected
[ 1.171031] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.171040] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.171066] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.171132] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d400
[ 1.171201] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.171207] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.171211] usb usb4: Product: UHCI Host Controller
[ 1.171215] usb usb4: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
[ 1.171219] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.171518] hub 4-0:1.0: USB hub found
[ 1.171533] hub 4-0:1.0: 2 ports detected
[ 1.171742] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.171749] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.171773] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.171810] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d800
[ 1.171878] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.171885] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.171891] usb usb5: Product: UHCI Host Controller
[ 1.171896] usb usb5: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
[ 1.171902] usb usb5: SerialNumber: 0000:00:1d.3
[ 1.172252] hub 5-0:1.0: USB hub found
[ 1.172263] hub 5-0:1.0: 2 ports detected
[ 1.172572] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[ 1.172659] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.175011] scsi2 : ata_piix
[ 1.175223] scsi3 : ata_piix
[ 1.175363] ata3: SATA max UDMA/133 cmd 0xec00 ctl 0xe800 bmdma 0xdc00 irq 18
[ 1.175370] ata4: SATA max UDMA/133 cmd 0xe400 ctl 0xe000 bmdma 0xdc08 irq 18
[ 1.178738] FDC 0 is a post-1991 82077
[ 1.184371] firewire_ohci: Added fw-ohci device 0000:03:09.0, OHCI v1.0, 8 IR + 8 IT contexts, quirks 0x11
[ 1.347834] ata2.00: ATAPI: SAMSUNG DVD-ROM SD-616T, F311, max UDMA/33
[ 1.347843] ata2.01: ATAPI: HL-DT-STDVD-RAM GH22LP20, 1.02, max UDMA/66
[ 1.347850] ata2.01: limited to UDMA/33 due to 40-wire cable
[ 1.348287] ata2.00: configured for UDMA/33
[ 1.356406] ata3.00: HPA detected: current 976771055, native 976773168
[ 1.356413] ata3.00: ATA-8: SAMSUNG HD502HJ, 1AJ100E4, max UDMA/133
[ 1.356417] ata3.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.364335] ata2.01: configured for UDMA/33
[ 1.364491] ata3.00: configured for UDMA/133
[ 1.398111] ata1.00: ATA-7: ST3160215A, 3.AAC, max UDMA/100
[ 1.398115] ata1.00: 312581808 sectors, multi 16: LBA48
[ 1.464680] ata1.00: configured for UDMA/100
[ 1.464837] scsi 0:0:0:0: Direct-Access ATA ST3160215A 3.AA PQ: 0 ANSI: 5
[ 1.465765] scsi 1:0:0:0: CD-ROM SAMSUNG DVD-ROM SD-616T F311 PQ: 0 ANSI: 5
[ 1.467261] scsi 1:0:1:0: CD-ROM HL-DT-ST DVD-RAM GH22LP20 1.02 PQ: 0 ANSI: 5
[ 1.467707] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD502HJ 1AJ1 PQ: 0 ANSI: 5
[ 1.487528] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.487654] sd 0:0:0:0: [sda] Write Protect is off
[ 1.487661] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.487725] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.489025] sr0: scsi3-mmc drive: 1x/48x cd/rw xa/form2 cdda tray
[ 1.489032] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.489336] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.492056] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.492344] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 1.493007] sd 2:0:0:0: [sdb] 976771055 512-byte logical blocks: (500 GB/465 GiB)
[ 1.493145] sd 2:0:0:0: [sdb] Write Protect is off
[ 1.493152] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.493210] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.502981] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.503081] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.503173] sr 1:0:1:0: Attached scsi generic sg2 type 5
[ 1.503265] sd 2:0:0:0: Attached scsi generic sg3 type 0
[ 1.512730] sda: sda1
[ 1.513304] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.528085] Refined TSC clocksource calibration: 3400.120 MHz.
[ 1.528093] Switching to clocksource tsc
[ 1.553930] sdb: sdb1 sdb2 < sdb5 sdb6 >
[ 1.554635] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 1.584062] usb 1-2: new high-speed USB device number 2 using ehci_hcd
[ 1.684262] firewire_core: created device fw0: GUID 0010dc00005e5bc4, S400
[ 1.718551] usb 1-2: New USB device found, idVendor=0c45, idProduct=6242
[ 1.718557] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.718560] usb 1-2: Product: USB20 Camera
[ 1.750619] e1000 0000:02:01.0: eth0: (PCI:33MHz:32-bit) 00:0c:76:e9:88:d8
[ 1.750634] e1000 0000:02:01.0: eth0: Intel(R) PRO/1000 Network Connection
[ 1.828040] usb 1-6: new high-speed USB device number 3 using ehci_hcd
[ 2.067738] PM: Starting manual resume from disk
[ 2.067744] PM: Hibernation image partition 8:22 present
[ 2.067746] PM: Looking for hibernation image.
[ 2.068058] PM: Image not found (code -22)
[ 2.068062] PM: Hibernation image not present or could not be loaded.
[ 2.093543] kjournald starting. Commit interval 5 seconds
[ 2.093581] EXT3-fs (sdb5): mounted filesystem with ordered data mode
[ 2.104181] usb 1-6: New USB device found, idVendor=0c76, idProduct=0005
[ 2.104188] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.104194] usb 1-6: Product: DataTraveler 2.0
[ 2.104198] usb 1-6: Manufacturer: Kingston
[ 2.104201] usb 1-6: SerialNumber: 000C76E988D8F140DC0B14DC
[ 3.630977] udevd[325]: starting version 175
[ 4.054380] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 4.054398] ACPI: Power Button [PWRB]
[ 4.054568] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 4.054578] ACPI: Power Button [PWRF]
[ 4.126842] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 4.378886] parport_pc 00:0b: reported by Plug and Play ACPI
[ 4.379001] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 4.382855] intel_rng: FWH not detected
[ 4.397105] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.487663] iTCO_vendor_support: vendor-support=0
[ 4.500978] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 4.501149] iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0860)
[ 4.501277] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.680575] ACPI: resource 0000:00:1f.3 [io 0x0c00-0x0c1f] conflicts with ACPI region SMOV [io 0xc00-0xc06]
[ 4.680580] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.706265] gameport gameport0: NS558 PnP Gameport is pnp00:0c/gameport0, io 0x200, speed 806kHz
[ 4.761887] cfg80211: Calling CRDA to update world regulatory domain
[ 4.772069] Initializing USB Mass Storage driver...
[ 4.772344] scsi4 : usb-storage 1-6:1.0
[ 4.772511] usbcore: registered new interface driver usb-storage
[ 4.772516] USB Mass Storage support registered.
[ 4.815602] snd_intel8x0 0000:00:1f.5: setting latency timer to 64
[ 4.871382] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 4.872421] Registered led device: rt2800pci-phy0::radio
[ 4.872465] Registered led device: rt2800pci-phy0::assoc
[ 4.872512] Registered led device: rt2800pci-phy0::quality
[ 4.962023] [drm] Initialized drm 1.1.0 20060810
[ 5.008453] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[ 5.115121] Linux media interface: v0.10
[ 5.136025] intel8x0_measure_ac97_clock: measured 54574 usecs (2630 samples)
[ 5.136029] intel8x0: clocking to 48000
[ 5.148925] Linux video capture interface: v2.00
[ 5.199092] udevd[365]: renamed network interface wlan0 to wlan1
[ 5.305741] gspca_main: v2.14.0 registered
[ 5.342344] gspca_main: sn9c20x-2.14.0 probing 0c45:6242
[ 5.362318] gspca_sn9c20x: MT9M111 sensor detected
[ 5.362798] input: sn9c20x as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/input/input5
[ 5.363089] usbcore: registered new interface driver sn9c20x
[ 5.374814] [drm] radeon kernel modesetting enabled.
[ 5.375631] [drm] initializing kernel modesetting (R420 0x1002:0x4B4C 0x1043:0x0100).
[ 5.375675] [drm] register mmio base: 0xFF7F0000
[ 5.375678] [drm] register mmio size: 65536
[ 5.379683] ATOM BIOS: 4B4C.9.8.1.4.AS01
[ 5.379715] agpgart-intel 0000:00:00.0: AGP 3.0 bridge
[ 5.379733] agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode
[ 5.379776] radeon 0000:01:00.0: putting AGP V3 device into 8x mode
[ 5.379799] radeon 0000:01:00.0: GTT: 128M 0xF0000000 - 0xF7FFFFFF
[ 5.379803] [drm] Generation 2 PCI interface, using max accessible memory
[ 5.379808] radeon 0000:01:00.0: VRAM: 256M 0x00000000E0000000 - 0x00000000EFFFFFFF (256M used)
[ 5.379836] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 5.379839] [drm] Driver supports precise vblank timestamp query.
[ 5.379855] [drm] radeon: irq initialized.
[ 5.380220] [drm] Detected VRAM RAM=256M, BAR=128M
[ 5.380224] [drm] RAM width 256bits DDR
[ 5.380303] [TTM] Zone kernel: Available graphics memory: 440266 kiB
[ 5.380306] [TTM] Zone highmem: Available graphics memory: 1557422 kiB
[ 5.380309] [TTM] Initializing pool allocator
[ 5.380316] [TTM] Initializing DMA pool allocator
[ 5.380353] [drm] radeon: 256M of VRAM memory ready
[ 5.380356] [drm] radeon: 128M of GTT memory ready.
[ 5.380388] [drm] radeon: ib pool ready.
[ 5.380476] [drm] radeon: 4 quad pipes, 1 z pipes initialized.
[ 5.381811] radeon 0000:01:00.0: WB disabled
[ 5.381823] [drm] fence driver on ring 0 use gpu addr 0xf0000000 and cpu addr 0xf822c000
[ 5.382227] [drm] Loading R400 Microcode
[ 5.480850] platform radeon_cp.0: firmware: agent aborted loading radeon/R420_cp.bin (not found?)
[ 5.481369] [drm:r100_cp_init] *ERROR* Failed to load firmware!
[ 5.481427] radeon 0000:01:00.0: failed initializing CP (-2).
[ 5.481474] radeon 0000:01:00.0: Disabling GPU acceleration
[ 5.481580] [drm] radeon: cp finalized
[ 5.481642] radeon 0000:01:00.0: f7390e00 unpin not necessary
[ 5.481678] [drm] radeon: cp finalized
[ 5.481683] radeon 0000:01:00.0: no bo for sa manager
[ 5.481761] [TTM] Finalizing pool allocator
[ 5.483099] [TTM] Finalizing DMA pool allocator
[ 5.483211] [TTM] Zone kernel: Used memory at exit: 0 kiB
[ 5.483221] [TTM] Zone highmem: Used memory at exit: 0 kiB
[ 5.483229] [drm] radeon: ttm finalized
[ 5.483236] [drm] Forcing AGP to PCI mode
[ 5.488434] ATOM BIOS: 4B4C.9.8.1.4.AS01
[ 5.488471] [drm] Generation 2 PCI interface, using max accessible memory
[ 5.488485] radeon 0000:01:00.0: VRAM: 256M 0x00000000E0000000 - 0x00000000EFFFFFFF (256M used)
[ 5.488491] radeon 0000:01:00.0: GTT: 512M 0x00000000C0000000 - 0x00000000DFFFFFFF
[ 5.488501] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 5.488506] [drm] Driver supports precise vblank timestamp query.
[ 5.488542] [drm] radeon: irq initialized.
[ 5.488561] [drm] Detected VRAM RAM=256M, BAR=128M
[ 5.488565] [drm] RAM width 256bits DDR
[ 5.488701] [TTM] Zone kernel: Available graphics memory: 440266 kiB
[ 5.488706] [TTM] Zone highmem: Available graphics memory: 1557422 kiB
[ 5.488710] [TTM] Initializing pool allocator
[ 5.488723] [TTM] Initializing DMA pool allocator
[ 5.488777] [drm] radeon: 256M of VRAM memory ready
[ 5.488781] [drm] radeon: 512M of GTT memory ready.
[ 5.488794] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 5.493283] [drm] radeon: ib pool ready.
[ 5.495228] [drm] PCIE GART of 512M enabled (table at 0x0000000037700000).
[ 5.495245] [drm] radeon: 4 quad pipes, 1 z pipes initialized.
[ 5.495308] radeon 0000:01:00.0: WB enabled
[ 5.495315] [drm] fence driver on ring 0 use gpu addr 0xc0000000 and cpu addr 0xf499c000
[ 5.495407] [drm] Loading R400 Microcode
[ 5.507724] platform radeon_cp.0: firmware: agent aborted loading radeon/R420_cp.bin (not found?)
[ 5.509538] [drm:r100_cp_init] *ERROR* Failed to load firmware!
[ 5.509592] radeon 0000:01:00.0: failed initializing CP (-2).
[ 5.509661] radeon 0000:01:00.0: Disabling GPU acceleration
[ 5.509715] [drm] radeon: cp finalized
[ 5.509918] radeon 0000:01:00.0: f73e8800 unpin not necessary
[ 5.514461] [drm] Radeon Display Connectors
[ 5.514468] [drm] Connector 0:
[ 5.514471] [drm] VGA
[ 5.514476] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 5.514479] [drm] Encoders:
[ 5.514482] [drm] CRT1: INTERNAL_DAC1
[ 5.514485] [drm] Connector 1:
[ 5.514488] [drm] S-video
[ 5.514490] [drm] Encoders:
[ 5.514493] [drm] TV1: INTERNAL_DAC2
[ 5.514496] [drm] Connector 2:
[ 5.514499] [drm] DVI-I
[ 5.514502] [drm] HPD1
[ 5.514506] [drm] DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68
[ 5.514509] [drm] Encoders:
[ 5.514512] [drm] CRT2: INTERNAL_DAC2
[ 5.514515] [drm] DFP1: INTERNAL_TMDS1
[ 5.514528] [drm] Possible lm63 thermal controller at 0x4c
[ 5.617429] [drm] fb mappable at 0xE0040000
[ 5.617432] [drm] vram apper at 0xE0000000
[ 5.617435] [drm] size 7057408
[ 5.617437] [drm] fb depth is 24
[ 5.617439] [drm] pitch is 6720
[ 5.617578] fbcon: radeondrmfb (fb0) is primary device
[ 5.703539] Console: switching to colour frame buffer device 210x65
[ 5.735755] fb0: radeondrmfb frame buffer device
[ 5.735758] drm: registered panic notifier
[ 5.735783] [drm] Initialized radeon 2.16.0 20080528 for 0000:01:00.0 on minor 0
[ 5.772779] scsi 4:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 2
[ 5.773912] sd 4:0:0:0: Attached scsi generic sg4 type 0
[ 5.775182] sd 4:0:0:0: [sdc] 62586816 512-byte logical blocks: (32.0 GB/29.8 GiB)
[ 5.775688] sd 4:0:0:0: [sdc] Write Protect is off
[ 5.775695] sd 4:0:0:0: [sdc] Mode Sense: 0b 00 00 08
[ 5.776303] sd 4:0:0:0: [sdc] No Caching mode page present
[ 5.776475] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[ 5.781878] sd 4:0:0:0: [sdc] No Caching mode page present
[ 5.782054] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[ 5.783065] sdc: sdc1
[ 5.785449] sd 4:0:0:0: [sdc] No Caching mode page present
[ 5.785638] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[ 5.785831] sd 4:0:0:0: [sdc] Attached SCSI removable disk
[ 7.539222] Adding 1270780k swap on /dev/sdb6. Priority:-1 extents:1 across:1270780k
[ 7.965473] EXT3-fs (sdb5): using internal journal
[ 8.256433] loop: module loaded
[ 9.796447] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.182674] RPC: Registered named UNIX socket transport module.
[ 10.182681] RPC: Registered udp transport module.
[ 10.182684] RPC: Registered tcp transport module.
[ 10.182687] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 10.239640] FS-Cache: Loaded
[ 10.292098] FS-Cache: Netfs 'nfs' registered for caching
[ 10.310270] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 10.597130] fuse init (API version 7.17)
[ 11.242167] NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team
[ 11.242701] DECnet: Routing cache hash table of 1024 buckets, 8Kbytes
[ 11.242721] NET: Registered protocol family 12
[ 15.034093] lp0: using parport0 (interrupt-driven).
[ 15.123838] ppdev: user-space parallel port driver
[ 16.572523] rt2800pci 0000:03:01.0: firmware: agent loaded rt2860.bin into memory
[ 16.608443] phy0 -> rt2800pci_mcu_status: Error - MCU request failed, no response from hardware
[ 19.860406] ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 25.708364] colord-sane[2831]: segfault at 0 ip b562c47a sp bfe1d928 error 6 in libdbus-1.so.3.7.2[b5601000+49000]
[ 41.340017] usb 1-3: new high-speed USB device number 4 using ehci_hcd
[ 41.474290] usb 1-3: New USB device found, idVendor=12d1, idProduct=1446
[ 41.474295] usb 1-3: New USB device strings: Mfr=3, Product=2, SerialNumber=0
[ 41.474298] usb 1-3: Product: HUAWEI Mobile
[ 41.474301] usb 1-3: Manufacturer: HUAWEI Technology
[ 41.476441] scsi5 : usb-storage 1-3:1.0
[ 41.476742] scsi6 : usb-storage 1-3:1.1
[ 41.476990] usb 1-3: USB disconnect, device number 4
[ 45.644016] usb 1-3: new high-speed USB device number 5 using ehci_hcd
[ 45.778574] usb 1-3: New USB device found, idVendor=12d1, idProduct=1436
[ 45.778579] usb 1-3: New USB device strings: Mfr=4, Product=3, SerialNumber=0
[ 45.778583] usb 1-3: Product: HUAWEI Mobile
[ 45.778585] usb 1-3: Manufacturer: HUAWEI Technology
[ 45.781904] scsi7 : usb-storage 1-3:1.5
[ 45.782220] scsi8 : usb-storage 1-3:1.6
[ 45.866053] cdc_ether 1-3:1.1: wwan0: register 'cdc_ether' at usb-0000:00:1d.7-3, Mobile Broadband Network Device, 02:50:f3:00:00:00
[ 45.866147] usbcore: registered new interface driver cdc_ether
[ 45.874684] usbcore: registered new interface driver usbserial
[ 45.874711] USB Serial support registered for generic
[ 45.874784] usbcore: registered new interface driver usbserial_generic
[ 45.874788] usbserial: USB Serial Driver core
[ 45.915488] USB Serial support registered for GSM modem (1-port)
[ 45.915610] option 1-3:1.0: GSM modem (1-port) converter detected
[ 45.915870] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB0
[ 45.915924] option 1-3:1.3: GSM modem (1-port) converter detected
[ 45.916448] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB1
[ 45.916494] option 1-3:1.4: GSM modem (1-port) converter detected
[ 45.916670] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB2
[ 45.917256] usbcore: registered new interface driver option
[ 45.917261] option: v0.7.2:USB Driver for GSM modems
[ 46.781452] scsi 7:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 46.782059] scsi 8:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
[ 46.786209] sr2: scsi-1 drive
[ 46.787351] sr 7:0:0:0: Attached scsi CD-ROM sr2
[ 46.787747] sr 7:0:0:0: Attached scsi generic sg5 type 5
[ 46.790738] sd 8:0:0:0: Attached scsi generic sg6 type 0
[ 46.795247] sd 8:0:0:0: [sdd] Attached SCSI removable disk
[ 173.412136] wlan1: authenticate with 00:12:2a:6b:9d:28 (try 1)
[ 173.413513] wlan1: authenticated
[ 173.428137] wlan1: associate with 00:12:2a:6b:9d:28 (try 1)
[ 173.430719] wlan1: RX AssocResp from 00:12:2a:6b:9d:28 (capab=0x431 status=0 aid=7)
[ 173.430726] wlan1: associated
[ 173.436481] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 179.483266] wlan1: disassociated from 00:12:2a:6b:9d:28 (Reason: 3)
[ 179.488207] cfg80211: Calling CRDA for country: PL
[ 179.488297] wlan1: deauthenticating from 00:12:2a:6b:9d:28 by local choice (reason=3)
[ 180.724133] wlan1: authenticate with 00:12:2a:6b:9d:28 (try 1)
[ 180.725580] wlan1: authenticated
[ 180.740094] wlan1: associate with 00:12:2a:6b:9d:28 (try 1)
[ 180.742684] wlan1: RX ReassocResp from 00:12:2a:6b:9d:28 (capab=0x431 status=0 aid=7)
[ 180.742690] wlan1: associated
[ 186.794275] wlan1: disassociated from 00:12:2a:6b:9d:28 (Reason: 3)
[ 186.828380] wlan1: deauthenticating from 00:12:2a:6b:9d:28 by local choice (reason=3)
[ 186.829927] cfg80211: Calling CRDA to update world regulatory domain
[ 188.064685] wlan1: authenticate with 00:12:2a:6b:9d:28 (try 1)
[ 188.065963] wlan1: authenticated
[ 188.066508] wlan1: associate with 00:12:2a:6b:9d:28 (try 1)
[ 188.070619] wlan1: RX ReassocResp from 00:12:2a:6b:9d:28 (capab=0x431 status=0 aid=7)
[ 188.070625] wlan1: associated
[ 194.124473] wlan1: disassociated from 00:12:2a:6b:9d:28 (Reason: 3)
[ 194.145480] cfg80211: Calling CRDA to update world regulatory domain
[ 194.145533] wlan1: deauthenticating from 00:12:2a:6b:9d:28 by local choice (reason=3)
[ 195.381615] wlan1: authenticate with 00:12:2a:6b:9d:28 (try 1)
[ 195.382942] wlan1: authenticated
[ 195.383568] wlan1: associate with 00:12:2a:6b:9d:28 (try 1)
[ 195.386237] wlan1: RX ReassocResp from 00:12:2a:6b:9d:28 (capab=0x431 status=0 aid=7)
[ 195.386254] wlan1: associated
[ 197.008813] wlan1: deauthenticating from 00:12:2a:6b:9d:28 by local choice (reason=3)
[ 197.028208] cfg80211: Calling CRDA for country: PL
[ 382.681994] PPP generic driver version 2.4.2
[ 382.737905] PPP BSD Compression module registered
[ 382.758980] PPP Deflate Compression module registered
[ 618.584903] wlan1: authenticate with 00:12:2a:6b:9d:28 (try 1)
[ 618.588333] wlan1: authenticated
[ 618.588876] wlan1: associate with 00:12:2a:6b:9d:28 (try 1)
[ 618.592734] wlan1: RX ReassocResp from 00:12:2a:6b:9d:28 (capab=0x431 status=0 aid=7)
[ 618.592744] wlan1: associated
[ 624.636617] wlan1: disassociated from 00:12:2a:6b:9d:28 (Reason: 3)
[ 624.680327] wlan1: deauthenticating from 00:12:2a:6b:9d:28 by local choice (reason=3)
[ 624.681919] cfg80211: Calling CRDA to update world regulatory domain
[ 625.919766] wlan1: authenticate with 00:12:2a:6b:9d:28 (try 1)
[ 625.921109] wlan1: authenticated
[ 625.922092] wlan1: associate with 00:12:2a:6b:9d:28 (try 1)
[ 625.924820] wlan1: RX ReassocResp from 00:12:2a:6b:9d:28 (capab=0x431 status=0 aid=7)
[ 625.924828] wlan1: associated
[ 631.977163] wlan1: disassociated from 00:12:2a:6b:9d:28 (Reason: 3)
[ 631.984237] cfg80211: Calling CRDA for country: PL
[ 631.984299] wlan1: deauthenticating from 00:12:2a:6b:9d:28 by local choice (reason=3)
[ 633.220737] wlan1: authenticate with 00:12:2a:6b:9d:28 (try 1)
[ 633.222064] wlan1: authenticated
[ 633.222584] wlan1: associate with 00:12:2a:6b:9d:28 (try 1)
[ 633.225555] wlan1: RX ReassocResp from 00:12:2a:6b:9d:28 (capab=0x431 status=0 aid=7)
[ 633.225560] wlan1: associated
[ 639.276099] wlan1: disassociated from 00:12:2a:6b:9d:28 (Reason: 3)
[ 639.284257] cfg80211: Calling CRDA to update world regulatory domain
[ 639.284322] wlan1: deauthenticating from 00:12:2a:6b:9d:28 by local choice (reason=3)
[ 640.521873] wlan1: authenticate with 00:12:2a:6b:9d:28 (try 1)
[ 640.523255] wlan1: authenticated
[ 640.523993] wlan1: associate with 00:12:2a:6b:9d:28 (try 1)
[ 640.526839] wlan1: RX ReassocResp from 00:12:2a:6b:9d:28 (capab=0x431 status=0 aid=7)
[ 640.526847] wlan1: associated
[ 643.012181] wlan1: deauthenticating from 00:12:2a:6b:9d:28 by local choice (reason=3)
[ 643.028542] cfg80211: Calling CRDA to update world regulatory domain
[ 1064.432210] wlan1: authenticate with 00:12:2a:6b:9d:28 (try 1)
[ 1064.434607] wlan1: authenticated
[ 1064.435274] wlan1: associate with 00:12:2a:6b:9d:28 (try 1)
[ 1064.441110] wlan1: RX ReassocResp from 00:12:2a:6b:9d:28 (capab=0x431 status=0 aid=7)
[ 1064.441116] wlan1: associated
[ 1070.491819] wlan1: disassociated from 00:12:2a:6b:9d:28 (Reason: 3)
[ 1070.496249] cfg80211: Calling CRDA for country: PL
[ 1070.496309] wlan1: deauthenticating from 00:12:2a:6b:9d:28 by local choice (reason=3)
[ 1071.732230] wlan1: authenticate with 00:12:2a:6b:9d:28 (try 1)
[ 1071.733572] wlan1: authenticated
[ 1071.734100] wlan1: associate with 00:12:2a:6b:9d:28 (try 1)
[ 1071.736725] wlan1: RX ReassocResp from 00:12:2a:6b:9d:28 (capab=0x431 status=0 aid=7)
[ 1071.736730] wlan1: associated
[ 1077.781947] wlan1: disassociated from 00:12:2a:6b:9d:28 (Reason: 3)
[ 1077.788219] cfg80211: Calling CRDA to update world regulatory domain
[ 1077.788274] wlan1: deauthenticating from 00:12:2a:6b:9d:28 by local choice (reason=3)
[ 1079.024849] wlan1: authenticate with 00:12:2a:6b:9d:28 (try 1)
[ 1079.026201] wlan1: authenticated
[ 1079.026911] wlan1: associate with 00:12:2a:6b:9d:28 (try 1)
[ 1079.029531] wlan1: RX ReassocResp from 00:12:2a:6b:9d:28 (capab=0x431 status=0 aid=7)
[ 1079.029536] wlan1: associated
[ 1085.082380] wlan1: disassociated from 00:12:2a:6b:9d:28 (Reason: 3)
[ 1085.092147] cfg80211: Calling CRDA to update world regulatory domain
[ 1085.092213] wlan1: deauthenticating from 00:12:2a:6b:9d:28 by local choice (reason=3)
[ 1086.328145] wlan1: authenticate with 00:12:2a:6b:9d:28 (try 1)
[ 1086.329526] wlan1: authenticated
[ 1086.331717] wlan1: associate with 00:12:2a:6b:9d:28 (try 1)
[ 1086.334343] wlan1: RX ReassocResp from 00:12:2a:6b:9d:28 (capab=0x431 status=0 aid=7)
[ 1086.334351] wlan1: associated
[ 1089.008138] wlan1: deauthenticating from 00:12:2a:6b:9d:28 by local choice (reason=3)
[ 1089.036438] cfg80211: Calling CRDA for country: PL
[ 1510.424144] wlan1: authenticate with 00:12:2a:6b:9d:28 (try 1)
[ 1510.426864] wlan1: authenticated
[ 1510.427488] wlan1: associate with 00:12:2a:6b:9d:28 (try 1)
[ 1510.430158] wlan1: RX ReassocResp from 00:12:2a:6b:9d:28 (capab=0x431 status=0 aid=7)
[ 1510.430166] wlan1: associated
[ 1516.480754] wlan1: disassociated from 00:12:2a:6b:9d:28 (Reason: 3)
[ 1516.488216] cfg80211: Calling CRDA to update world regulatory domain
[ 1516.488278] wlan1: deauthenticating from 00:12:2a:6b:9d:28 by local choice (reason=3)
[ 1517.724880] wlan1: authenticate with 00:12:2a:6b:9d:28 (try 1)
[ 1517.726233] wlan1: authenticated
[ 1517.726764] wlan1: associate with 00:12:2a:6b:9d:28 (try 1)
[ 1517.729406] wlan1: RX ReassocResp from 00:12:2a:6b:9d:28 (capab=0x431 status=0 aid=7)
[ 1517.729411] wlan1: associated
[ 1523.778240] wlan1: disassociated from 00:12:2a:6b:9d:28 (Reason: 3)
[ 1523.788162] cfg80211: Calling CRDA for country: PL
[ 1523.788217] wlan1: deauthenticating from 00:12:2a:6b:9d:28 by local choice (reason=3)
[ 1525.024169] wlan1: authenticate with 00:12:2a:6b:9d:28 (try 1)
[ 1525.025612] wlan1: authenticated
[ 1525.026313] wlan1: associate with 00:12:2a:6b:9d:28 (try 1)
[ 1525.028915] wlan1: RX ReassocResp from 00:12:2a:6b:9d:28 (capab=0x431 status=0 aid=7)
[ 1525.028921] wlan1: associated
