Kod: Zaznacz cały
Bootdata ok (command line is root=/dev/sda3 ro )
Linux version 2.6.18-4-amd64 (Debian 2.6.18.dfsg.1-12) (waldi@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Mon Mar 26 11:36:53 CEST 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ff10000 (usable)
BIOS-e820: 000000003ff10000 - 000000003ff1b000 (ACPI data)
BIOS-e820: 000000003ff1b000 - 000000003ff80000 (ACPI NVS)
BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
DMI present.
ACPI: RSDP (v003 PTLTD ) @ 0x00000000000f8240
ACPI: XSDT (v001 ACRSYS ACRPRDCT 0x06040000 INNA 0x00000000) @ 0x000000003ff148c9
ACPI: FADT (v003 NVIDIA MCP51M 0x06040000 PTL 0x000f4240) @ 0x000000003ff1aaa6
ACPI: SLIC (v001 ACRSYS ACRPRDCT 0x06040000 ANNI 0x00000001) @ 0x000000003ff1ac0e
ACPI: MCFG (v001 PTLTD MCFG 0x06040000 LTP 0x00000000) @ 0x000000003ff1ad84
ACPI: HPET (v001 PTLTD HPETTBL 0x06040000 LTP 0x00000001) @ 0x000000003ff1adc0
ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x000000003ff1adf8
ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x000000003ff1ae56
ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP 0x00000001) @ 0x000000003ff1ae7e
ACPI: DSDT (v001 NVIDIA MCP51M 0x06040000 MSFT 0x0100000e) @ 0x0000000000000000
Scanning NUMA topology in Northbridge 24
Number of nodes 1
Node 0 MemBase 0000000000000000 Limit 000000003ff10000
NUMA: Using 63 for the hash shift.
Using node hash shift of 63
Bootmem setup node 0 0000000000000000-000000003ff10000
On node 0 totalpages: 257338
DMA zone: 3054 pages, LIFO batch:0
DMA32 zone: 254284 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:8 APIC version 16
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 15:8 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to physical flat
ACPI: HPET id: 0x10de8201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
SMP: Allowing 2 CPUs, 0 hotplug CPUs
Built 1 zonelists. Total pages: 257338
Kernel command line: root=/dev/sda3 ro
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
time.c: Using 25.000000 MHz WALL HPET GTOD HPET timer.
time.c: Detected 1607.517 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Checking aperture...
CPU 0: aperture @ 8010000000 size 32 MB
Aperture too small (32 MB)
No AGP bridge found
Memory: 1022348k/1047616k available (1930k kernel code, 24872k reserved, 868k data, 176k init)
Calibrating delay using timer specific routine.. 3218.88 BogoMIPS (lpj=6437776)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0/0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
Using local APIC timer interrupts.
result 12558645
Detected 12.558 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 3214.68 BogoMIPS (lpj=6429374)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
AMD Turion(tm) 64 X2 Mobile Technology TL-52 stepping 02
CPU 1: Syncing TSC to CPU 0.
CPU 1: synchronized TSC with CPU 0 (last diff 0 cycles, maxerr 457 cycles)
Brought up 2 CPUs
testing NMI watchdog ... OK.
migration_cost=307
checking if image is initramfs... it is
Freeing initrd memory: 5314k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG at e0000000
PCI: No mmconfig possible on device 0:18
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
Boot video device is 0000:03:00.0
PCI: Transparent bridge - 0000:00:10.0
PCI: Bus #05 (-#08) is hidden behind transparent bridge #04 (-#05) (try 'pci=assign-busses')
Please report the result to linux-kernel to fix this permanently
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Embedded Controller [EC0] (gpe 1) interrupt mode.
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 19 20 21 22 23) *10
ACPI: PCI Interrupt Link [LNK3] (IRQs 16 17 18 19 20 21 22 23) *10
ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LK1E] (IRQs 16 17 18 19 20 21 22 23) *10
ACPI: PCI Interrupt Link [LK2E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LK3E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LK4E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 19 20 21 22 23) *10
ACPI: PCI Interrupt Link [LSMU] (IRQs 16 17 18 19 20 21 22 23) *11
ACPI: PCI Interrupt Link [LUS0] (IRQs 16 17 18 19 20 21 22 23) *11
ACPI: PCI Interrupt Link [LUS2] (IRQs 16 17 18 19 20 21 22 23) *7
ACPI: PCI Interrupt Link [LMAC] (IRQs 16 17 18 19 20 21 22 23) *11
ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LACI] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LMCI] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LTID] (IRQs 16 17 18 19 20 21 22 23) *5
ACPI: PCI Interrupt Link [LSI1] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: ACPI device : hid PNP0A03
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0200
pnp: ACPI device : hid PNP0800
pnp: ACPI device : hid PNP0B00
pnp: ACPI device : hid PNP0C04
pnp: ACPI device : hid PNP0103
pnp: ACPI device : hid PNP0303
pnp: ACPI device : hid SYN0302
pnp: PnP ACPI: found 11 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Cannot allocate resource region 7 of bridge 0000:00:04.0
PCI: Cannot allocate resource region 5 of device 0000:03:00.0
hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 31
hpet0: 3 32-bit timers, 25000000 Hz
PCI-DMA: Disabling IOMMU.
pnp: the driver 'system' has been registered
pnp: match found with the PnP device '00:01' and the driver 'system'
pnp: match found with the PnP device '00:02' and the driver 'system'
pnp: 00:02: ioport range 0x1000-0x107f could not be reserved
pnp: 00:02: ioport range 0x1080-0x10ff has been reserved
pnp: 00:02: ioport range 0x1400-0x147f has been reserved
pnp: 00:02: ioport range 0x1480-0x14ff could not be reserved
pnp: 00:02: ioport range 0x1800-0x187f has been reserved
pnp: 00:02: ioport range 0x1880-0x18ff has been reserved
pnp: 00:02: ioport range 0x2000-0x203f has been reserved
pnp: match found with the PnP device '00:03' and the driver 'system'
PCI: Bridge: 0000:00:02.0
IO window: disabled.
MEM window: c0100000-c01fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:03.0
IO window: 4000-4fff
MEM window: c4000000-c40fffff
PREFETCH window: disabled.
PCI: Failed to allocate mem resource #6:20000@e0000000 for 0000:03:00.0
PCI: Bridge: 0000:00:04.0
IO window: 5000-5fff
MEM window: c1000000-c2ffffff
PREFETCH window: d0000000-dfffffff
PCI: Bus 5, cardbus bridge: 0000:04:06.0
IO window: 00006000-000060ff
IO window: 00006400-000064ff
PREFETCH window: 50000000-51ffffff
MEM window: 52000000-53ffffff
PCI: Bridge: 0000:00:10.0
IO window: 6000-6fff
MEM window: c3000000-c30fffff
PREFETCH window: 50000000-51ffffff
PCI: Setting latency timer of device 0000:00:02.0 to 64
PCI: Setting latency timer of device 0000:00:03.0 to 64
PCI: Setting latency timer of device 0000:00:04.0 to 64
PCI: Setting latency timer of device 0000:00:10.0 to 64
ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 11
ACPI: PCI Interrupt 0000:04:06.0[A] -> Link [LNK4] -> GSI 11 (level, low) -> IRQ 11
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Simple Boot Flag at 0x36 set to 0x1
audit: initializing netlink socket (disabled)
audit(1184334624.044:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:02.0 to 64
pcie_portdrv_probe->Dev[02fc:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:02.:p cie00]
Allocate Port Service[0000:00:02.:p cie03]
PCI: Setting latency timer of device 0000:00:03.0 to 64
pcie_portdrv_probe->Dev[02fd:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:03.:p cie00]
Allocate Port Service[0000:00:03.:p cie03]
PCI: Setting latency timer of device 0000:00:04.0 to 64
pcie_portdrv_probe->Dev[02fb:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:04.:p cie00]
Allocate Port Service[0000:00:04.:p cie03]
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
pnp: the driver 'serial' has been registered
RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
pnp: the driver 'i8042 kbd' has been registered
pnp: match found with the PnP device '00:09' and the driver 'i8042 kbd'
pnp: the driver 'i8042 aux' has been registered
pnp: match found with the PnP device '00:0a' and the driver 'i8042 aux'
PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI: (supports S0 S3 S4 S5)
Freeing unused kernel memory: 176k freed
ACPI: Thermal Zone [TZS0] (49 C)
ACPI: Thermal Zone [TZS1] (52 C)
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 23
GSI 16 sharing vector 0xC9 and IRQ 16
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LUS0] -> GSI 23 (level, high) -> IRQ 201
PCI: Setting latency timer of device 0000:00:0b.0 to 64
ohci_hcd 0000:00:0b.0: OHCI Host Controller
ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:0b.0: irq 201, io mem 0xc0004000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.56.
NFORCE-MCP51: IDE controller at PCI slot 0000:00:0d.0
NFORCE-MCP51: chipset revision 241
NFORCE-MCP51: not 100% native mode: will probe irqs later
NFORCE-MCP51: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE-MCP51: 0000:00:0d.0 (rev f1) UDMA133 controller
ide0: BM-DMA at 0x3080-0x3087, BIOS settings: hda :p io, hdb :p io
ide1: BM-DMA at 0x3088-0x308f, BIOS settings: hdc :D MA, hdd :p io
Probing IDE interface ide0...
input: AT Translated Set 2 keyboard as /class/input/input0
usb 1-6: new full speed USB device using ohci_hcd and address 2
input: AT Translated Set 2 keyboard as /class/input/input1
Probing IDE interface ide1...
usb 1-6: configuration #1 chosen from 1 choice
usb 1-8: new full speed USB device using ohci_hcd and address 3
usb 1-8: configuration #1 chosen from 1 choice
hdc: Slimtype DVDRW SSM-8515S, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
GSI 17 sharing vector 0xD1 and IRQ 17
ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LUS2] -> GSI 22 (level, high) -> IRQ 209
PCI: Setting latency timer of device 0000:00:0b.1 to 64
ehci_hcd 0000:00:0b.1: EHCI Host Controller
ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:0b.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:0b.1
ehci_hcd 0000:00:0b.1: irq 209, io mem 0xc0005000
ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
SCSI subsystem initialized
libata version 2.00 loaded.
usb 1-6: USB disconnect, address 2
sata_nv 0000:00:0e.0: version 2.0
ACPI: PCI Interrupt Link [LTID] enabled at IRQ 21
GSI 18 sharing vector 0xD9 and IRQ 18
ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LTID] -> GSI 21 (level, high) -> IRQ 217
PCI: Setting latency timer of device 0000:00:0e.0 to 64
ata1: SATA max UDMA/133 cmd 0x30B0 ctl 0x30A6 bmdma 0x3090 irq 217
ata2: SATA max UDMA/133 cmd 0x30A8 ctl 0x30A2 bmdma 0x3098 irq 217
scsi0 : sata_nv
usb 1-8: USB disconnect, address 3
usb 2-6: new high speed USB device using ehci_hcd and address 2
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7, max UDMA/100, 312581808 sectors: LBA48 NCQ (depth 0/32)
ata1.00: ata1: dev 0 multi count 16
ata1.00: configured for UDMA/100
scsi1 : sata_nv
ata2: SATA link down (SStatus 0 SControl 300)
ATA: abnormal status 0x7F on port 0x30AF
Vendor: ATA Model: Hitachi HTS54161 Rev: SB4O
Type: Direct-Access ANSI SCSI revision: 05
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
GSI 19 sharing vector 0xE1 and IRQ 19
ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LMAC] -> GSI 20 (level, high) -> IRQ 225
PCI: Setting latency timer of device 0000:00:14.0 to 64
forcedeth: using HIGHDMA
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda:<6>hdc: ATAPI 63X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
usb 2-6: configuration #1 chosen from 1 choice
sda1 sda2 sda3 sda4 < sda5 >
sd 0:0:0:0: Attached scsi disk sda
ohci_hcd 0000:00:0b.0: wakeup
eth0: forcedeth.c: subsystem: 01025:0112 bound to 0000:00:14.0
usb 1-8: new full speed USB device using ohci_hcd and address 4
Attempting manual resume
ReiserFS: sda3: found reiserfs format "3.6" with standard journal
usb 1-8: configuration #1 chosen from 1 choice
ReiserFS: sda3: using ordered data mode
ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda3: checking transaction log (sda3)
ReiserFS: sda3: Using r5 hash to sort names
i2c_adapter i2c-0: nForce2 SMBus adapter at 0x3040
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x3000
input: PC Speaker as /class/input/input2
[ueagle-atm] driver ueagle 1.3 loaded
usb 1-8: [ueagle-atm] ADSL device founded vid (0X1110) pid (0X9021) : Eagle II
Yenta: CardBus bridge found at 0000:04:06.0 [1025:0112]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:04:06.0, mfunc 0x013a1b22, devctl 0x64
usb 1-8: reset full speed USB device using ohci_hcd and address 4
Yenta: ISA IRQ mask 0x04f8, PCI irq 11
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#04) from #05 to #08
pcmcia: parent PCI bridge I/O window: 0x6000 - 0x6fff
pcmcia: parent PCI bridge Memory window: 0xc3000000 - 0xc30fffff
pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x51ffffff
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 19
GSI 20 sharing vector 0xE9 and IRQ 20
ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LAZA] -> GSI 19 (level, high) -> IRQ 233
PCI: Setting latency timer of device 0000:00:10.1 to 64
usb 1-8: [ueagle-atm] using iso mode
usb 1-8: [ueagle-atm] (re)booting started
usbcore: registered new driver ueagle-atm
hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1280b1, caps: 0xa04713/0x204000
input: SynPS/2 Synaptics TouchPad as /class/input/input3
psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1
ts: Compaq touchscreen protocol output
Adding 5678936k swap on /dev/sda5. Priority:-1 extents:1 across:5678936k
loop: loaded (max 8 devices)
ndiswrapper version 1.47 loaded (smp=yes)
ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisMSetBusData'
ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisAllocateMdl'
ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisFreeMdl'
ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisFreeNetBufferList'
ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisMDeregisterInterruptEx'
ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisAllocateNetBufferAndNetBufferList'
ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisAllocateMemoryWithTagPriority'
ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisMSendNetBufferListsComplete'
ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisMDeregisterMiniportDriver'
ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisMRegisterScatterGatherDma'
ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisMDeregisterScatterGatherDma'
ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisMSynchronizeWithInterruptEx'
ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisFreeNetBufferListPool'
ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisMOidRequestComplete'
ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisAllocateIoWorkItem'
ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisMRegisterInterruptEx'
ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisOpenConfigurationEx'
ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisMIndicateReceiveNetBufferLists'
ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisQueueIoWorkItem'
ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisMGetBusData'
ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisMSetMiniportAttributes'
ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisMRegisterMiniportDriver'ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisAllocateNetBufferListPool'
ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisMIndicateStatusEx'
ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisFreeIoWorkItem'
ndiswrapper (load_sys_files:216): couldn't prepare driver 'bcmwl6'
ndiswrapper (load_wrap_driver:118): couldn't load driver bcmwl6; check system log for messages from 'loadndisdriver'
usbcore: registered new driver ndiswrapper
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: [email]dm-devel@redhat.com[/email]
NTFS driver 2.1.27 [Flags: R/W MODULE].
NTFS volume version 3.1.
NTFS-fs warning (device sda2): load_system_files(): Unsupported volume flags 0x4000 encountered.
NTFS-fs error (device sda2): load_system_files(): Volume has unsupported flags set. Mounting read-only. Run chkdsk and mount in Windows.
pcmcia: Detected deprecated PCMCIA ioctl usage from process: discover.
pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.
pcmcia: see [url]http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html[/url] for details.
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
vbetool[2840]: segfault at 0000000000003632 rip 0000000000424854 rsp 00007fff6daf49a0 error 4
usb 1-8: [ueagle-atm] modem operational
usb 1-8: [ueagle-atm] ATU-R firmware version : 44e2ea17
ACPI: Battery Slot [BAT0] (battery present)
ACPI: AC Adapter [ADP1] (on-line)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID0]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Power Button (CM) [PWRB]
pnp: the driver 'parport_pc' has been registered
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
eth0: no link during initialization.
ADDRCONF(NETDEV_UP): eth0: link is not ready
Bluetooth: Core ver 2.10
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
psmouse.c: TouchPad at isa0060/serio4/input0 - driver resynched.
Unable to identify CD-ROM format.
PPP BSD Compression module registered
PPP Deflate Compression module registered
quvision:/etc#
hmm wywala bledy aczkolwiek pisze driver present. Szukalem po necie i znalazlem podobny error
