Wszystko związane z jądrem systemowym, sterownikami, sprzętem itp.
			
		
		
			
				
																			
								superserek 							 
									
		Posty:  53 Rejestracja:  12 marca 2019, 12:19 
		
						
					
													
							
						
									
						Post 
					 
								autor: superserek  18 marca 2019, 12:19 
			
			
			
			
			
			Laptop lenovo s130, kernel 4.19, klawisze FN działają w połowie (tylko home, end, pgUp/down), jednak nie mogę odblokować touchapda.
Kod: Zaznacz cały 
synclient -l
Couldn't find synaptics properties. No synaptics driver loaded?
Paczki do xów zostały zainstalowane.
Kod: Zaznacz cały 
xinput list⎡ Virtual core pointer                    	id=2	[master pointer  (3)]
⎜   ↳ Virtual core XTEST pointer              	id=4	[slave  pointer  (2)]
⎜   ↳ 2.4G Mouse Mouse                        	id=9	[slave  pointer  (2)]
⎜   ↳ 2.4G Mouse Consumer Control             	id=10	[slave  pointer  (2)]
⎣ Virtual core keyboard                   	id=3	[master keyboard (2)]
    ↳ Virtual core XTEST keyboard             	id=5	[slave  keyboard (3)]
    ↳ Video Bus                               	id=6	[slave  keyboard (3)]
    ↳ Power Button                            	id=7	[slave  keyboard (3)]
    ↳ 2.4G Mouse                              	id=8	[slave  keyboard (3)]
    ↳ 2.4G Mouse System Control               	id=11	[slave  keyboard (3)]
    ↳ EasyCamera: EasyCamera                  	id=12	[slave  keyboard (3)]
    ↳ AT Translated Set 2 keyboard            	id=13	[slave  keyboard (3)]
    ↳ 2.4G Mouse Consumer Control             	id=14	[slave  keyboard (3)]
 
		 
				
		
		 
	 
				
		
		
			
				
								dedito 							 
						Moderator 			
		Posty:  3597 Rejestracja:  18 listopada 2013, 21:07Lokalizacja:  Gliwice 
		
						
					
													
							
						
									
						Post 
					 
								autor: dedito  18 marca 2019, 12:45 
			
			
			
			
			
			
			
			
									
						
										
						 
		 
				
		
		 
	 
				
		
		
			
				
																			
								superserek 							 
									
		Posty:  53 Rejestracja:  12 marca 2019, 12:19 
		
						
					
													
							
						
									
						Post 
					 
								autor: superserek  18 marca 2019, 12:53 
			
			
			
			
			
			Kod: Zaznacz cały 
lspci -k
00:00.0 Host bridge: Intel Corporation Device 31f0 (rev 03)
	Subsystem: Lenovo Device 3807
00:00.1 Signal processing controller: Intel Corporation Celeron/Pentium Silver Processor Dynamic Platform and Thermal Framework Processor Participant (rev 03)
	Kernel driver in use: proc_thermal
	Kernel modules: processor_thermal_device
00:00.3 System peripheral: Intel Corporation Device 3190 (rev 03)
	Subsystem: Lenovo Device 3807
00:02.0 VGA compatible controller: Intel Corporation UHD Graphics 605 (rev 03)
	Subsystem: Lenovo UHD Graphics 605
	Kernel driver in use: i915
	Kernel modules: i915
00:0e.0 Audio device: Intel Corporation Device 3198 (rev 03)
	Subsystem: Lenovo Device 3807
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel, snd_soc_skl
00:0f.0 Communication controller: Intel Corporation Celeron/Pentium Silver Processor Trusted Execution Engine Interface (rev 03)
	Kernel driver in use: mei_me
	Kernel modules: mei_me
00:12.0 SATA controller: Intel Corporation Device 31e3 (rev 03)
	Subsystem: Lenovo Device 3807
	Kernel driver in use: ahci
	Kernel modules: ahci
00:13.0 PCI bridge: Intel Corporation Device 31d8 (rev f3)
	Kernel driver in use: pcieport
00:14.0 PCI bridge: Intel Corporation Device 31d6 (rev f3)
	Kernel driver in use: pcieport
00:14.1 PCI bridge: Intel Corporation Device 31d7 (rev f3)
	Kernel driver in use: pcieport
00:15.0 USB controller: Intel Corporation Device 31a8 (rev 03)
	Subsystem: Lenovo Device 3801
	Kernel driver in use: xhci_hcd
	Kernel modules: xhci_pci
00:17.0 Signal processing controller: Intel Corporation Device 31b4 (rev 03)
	Subsystem: Lenovo Device 3807
	Kernel driver in use: intel-lpss
	Kernel modules: intel_lpss_pci
00:1c.0 SD Host controller: Intel Corporation Celeron/Pentium Silver Processor SDA Standard Compliant SD Host Controller (rev 03)
	Subsystem: Lenovo Celeron/Pentium Silver Processor SDA Standard Compliant SD Host Controller
	Kernel driver in use: sdhci-pci
	Kernel modules: sdhci_pci
00:1f.0 ISA bridge: Intel Corporation Device 31e8 (rev 03)
	Subsystem: Lenovo Device 3802
00:1f.1 SMBus: Intel Corporation Celeron/Pentium Silver Processor Gaussian Mixture Model (rev 03)
	Kernel driver in use: i801_smbus
	Kernel modules: i2c_i801
02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01)
	Subsystem: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader
	Kernel driver in use: rtsx_pci
	Kernel modules: rtsx_pci
03:00.0 Network controller: Intel Corporation Intel Dual Band Wireless-AC 3165 Plus Bluetooth (rev 99)
	Subsystem: Intel Corporation Dual Band Wireless-AC 3165 Plus Bluetooth
	Kernel driver in use: iwlwifi
	Kernel modules: iwlwifi
 
		 
				
		
		 
	 
				
		
		
			
				
								arturromarr 							 
						Beginner 			
		Posty:  190 Rejestracja:  14 sierpnia 2015, 01:21 
		
						
					
													
							
						
									
						Post 
					 
								autor: arturromarr  18 marca 2019, 23:42 
			
			
			
			
			
			Może jakieś zamknięte sterowniki są, bo na moim Lenowo 120S nie działał touchpad podczas graficznej instalacji systemu. Instalowałem Debiana w wersji z dodanym zamkniętymi programami i po zainstalowaniu wszystko działało.
			
			
									
						
										
						 
		 
				
		
		 
	 
				
		
		
			
				
								dedito 							 
						Moderator 			
		Posty:  3597 Rejestracja:  18 listopada 2013, 21:07Lokalizacja:  Gliwice 
		
						
					
													
							
						
									
						Post 
					 
								autor: dedito  19 marca 2019, 07:09 
			
			
			
			
			
			W dmesg powinno być widać, co i jak wykrywa.
			
			
									
						
										
						 
		 
				
		
		 
	 
				
		
		
			
				
																			
								superserek 							 
									
		Posty:  53 Rejestracja:  12 marca 2019, 12:19 
		
						
					
													
							
						
									
						Post 
					 
								autor: superserek  19 marca 2019, 07:36 
			
			
			
			
			
			@arturromarr - to jest właśnie wersja z frimware, instalator graficzny
			
			
									
						
										
						 
		 
				
		
		 
	 
				
		
		
			
				
								dedito 							 
						Moderator 			
		Posty:  3597 Rejestracja:  18 listopada 2013, 21:07Lokalizacja:  Gliwice 
		
						
					
													
							
						
									
						Post 
					 
								autor: dedito  19 marca 2019, 07:49 
			
			
			
			
			
			Wrzuć jednak, zerknę.
			
			
									
						
										
						 
		 
				
		
		 
	 
				
				
		
		
			
				
								dedito 							 
						Moderator 			
		Posty:  3597 Rejestracja:  18 listopada 2013, 21:07Lokalizacja:  Gliwice 
		
						
					
													
							
						
									
						Post 
					 
								autor: dedito  19 marca 2019, 08:20 
			
			
			
			
			
			Zainstaluj acpidump i wrzuć wynik: