"JBD2: Detected IO errors" prezent mikołajkowy

Wszystko związane z jądrem systemowym, sterownikami, sprzętem itp.
Awatar użytkownika
tommot
Posty: 15
Rejestracja: 09 października 2016, 12:30

"JBD2: Detected IO errors" prezent mikołajkowy

Post autor: tommot »

Witam
prosze o interpretacje tego wpisu w logach

Kod: Zaznacz cały

Dec  6 20:02:13 enterprise kernel: [194684.646801] JBD2: Detected IO errors while flushing file data on sda1-8
Dec  6 20:03:33 enterprise kernel: [194765.367483] JBD2: Detected IO errors while flushing file data on sda1-8
Dec  6 20:04:53 enterprise kernel: [194845.430934] JBD2: Detected IO errors while flushing file data on sda1-8
Dec  6 20:07:11 enterprise kernel: [194983.540959] JBD2: Detected IO errors while flushing file data on sda1-8
Dec  6 20:07:41 enterprise kernel: [195013.564184] JBD2: Detected IO errors while flushing file data on sda1-8
Dec  6 20:08:21 enterprise kernel: [195053.595904] JBD2: Detected IO errors while flushing file data on sda1-8
Dec  6 20:09:40 enterprise kernel: [195132.666599] JBD2: Detected IO errors while flushing file data on sda1-8
Dec  6 20:11:48 enterprise kernel: [195260.538583] JBD2: Detected IO errors while flushing file data on sda1-8
Dec  6 20:13:47 enterprise kernel: [195379.854479] JBD2: Detected IO errors while flushing file data on sda1-8
Dec  6 20:15:53 enterprise kernel: [195505.954412] JBD2: Detected IO errors while flushing file data on sda1-8
Dec  6 20:17:03 enterprise kernel: [195575.993910] JBD2: Detected IO errors while flushing file data on sda1-8
Dec  6 20:17:41 enterprise kernel: [195614.040634] JBD2: Detected IO errors while flushing file data on sda1-8
bo ja już czarne scenariusze pisze :(
-----------------------------------
Debian 9.1
Debian 3.16.43-2+deb8u5
Atom 1Ghz d2500cc miniATX
Ostatnio zmieniony 09 grudnia 2017, 09:02 przez tommot, łącznie zmieniany 2 razy.
Awatar użytkownika
dedito
Moderator
Posty: 3512
Rejestracja: 18 listopada 2013, 21:07
Lokalizacja: Gliwice

Re: "JBD2: Detected IO errors" prezent mikołajkowy

Post autor: dedito »

Pokaż tablicę smart tego dysku.
Awatar użytkownika
tommot
Posty: 15
Rejestracja: 09 października 2016, 12:30

Re: "JBD2: Detected IO errors" prezent mikołajkowy

Post autor: tommot »

wlepię całość

Kod: Zaznacz cały

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Black
Device Model:     WDC WD3200BEKT-75PVMT1
Serial Number:    WD-WXC1A72V1338
LU WWN Device Id: 5 0014ee 6ad78170d
Firmware Version: 01.01A01
User Capacity:    320,072,933,376 bytes [320 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    7200 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 2.6, 3.0 Gb/s
Local Time is:    Thu Dec  7 09:35:00 2017 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      ( 249) Self-test routine in progress...
                                        90% of test remaining.
Total time to complete Offline
data collection:                ( 6600) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        (  68) minutes.
Conveyance self-test routine
recommended polling time:        (   5) minutes.
SCT capabilities:              (0x7035) SCT Status supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   164   163   021    Pre-fail  Always       -       791
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       319
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   075   075   000    Old_age   Always       -       18907
 10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       318
191 G-Sense_Error_Rate      0x0032   033   033   000    Old_age   Always       -       67
192 Power-Off_Retract_Count 0x0032   198   198   000    Old_age   Always       -       1901
193 Load_Cycle_Count        0x0032   001   001   000    Old_age   Always       -       2302889
194 Temperature_Celsius     0x0022   108   094   000    Old_age   Always       -       35
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   100   253   000    Old_age   Offline      -       0
240 Head_Flying_Hours       0x0032   084   084   000    Old_age   Always       -       12148
241 Total_LBAs_Written      0x0032   200   200   000    Old_age   Always       -       2272128171
242 Total_LBAs_Read         0x0032   200   200   000    Old_age   Always       -       330699311
254 Free_Fall_Sensor        0x0032   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Poprawiłem znaczniki kodu. Uzupełnij komendę wywołującą.
Awatar użytkownika
dedito
Moderator
Posty: 3512
Rejestracja: 18 listopada 2013, 21:07
Lokalizacja: Gliwice

Re: "JBD2: Detected IO errors" prezent mikołajkowy

Post autor: dedito »

Nie widzę problemów, ale warto też wykonać test.

Kod: Zaznacz cały

smartctl -t
Awatar użytkownika
tommot
Posty: 15
Rejestracja: 09 października 2016, 12:30

Re: "JBD2: Detected IO errors" prezent mikołajkowy

Post autor: tommot »

musiałem chwilę zaczekać na wynik

Kod: Zaznacz cały

$smartctl --test=long /dev/sda
smartctl 6.6 2016-05-31 r4324 [i686-linux-3.16.0-4-686-pae] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Extended self-test routine immediately in off-line mode".
Drive command "Execute SMART Extended self-test routine immediately in off-line mode" successful.
Testing has begun.
Please wait 68 minutes for test to complete.
Test will complete after Thu Dec  7 13:50:58 2017

Use smartctl -X to abort test.
wynik który nadal mi nic nie mówi :(

Kod: Zaznacz cały

$ smartctl  -a /dev/sda
smartctl 6.6 2016-05-31 r4324 [i686-linux-3.16.0-4-686-pae] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Black
Device Model:     WDC WD3200BEKT-75PVMT1
Serial Number:    WD-WXC1A72V1338
LU WWN Device Id: 5 0014ee 6ad78170d
Firmware Version: 01.01A01
User Capacity:    320,072,933,376 bytes [320 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    7200 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 2.6, 3.0 Gb/s
Local Time is:    Thu Dec  7 14:52:48 2017 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      ( 249) Self-test routine in progress...
                                        90% of test remaining.
Total time to complete Offline
data collection:                ( 6600) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        (  68) minutes.
Conveyance self-test routine
recommended polling time:        (   5) minutes.
SCT capabilities:              (0x7035) SCT Status supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   164   163   021    Pre-fail  Always       -       791
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       319
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   075   075   000    Old_age   Always       -       18912
 10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       318
191 G-Sense_Error_Rate      0x0032   033   033   000    Old_age   Always       -       67
192 Power-Off_Retract_Count 0x0032   198   198   000    Old_age   Always       -       1901
193 Load_Cycle_Count        0x0032   001   001   000    Old_age   Always       -       2302911
194 Temperature_Celsius     0x0022   107   094   000    Old_age   Always       -       36
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0
240 Head_Flying_Hours       0x0032   084   084   000    Old_age   Always       -       12153
241 Total_LBAs_Written      0x0032   200   200   000    Old_age   Always       -       2272937636
242 Total_LBAs_Read         0x0032   200   200   000    Old_age   Always       -       330711342
254 Free_Fall_Sensor        0x0032   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%     18911         -
# 2  Selective offline   Completed without error       00%     18909         -
# 3  Extended offline    Completed without error       00%     18908         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1       10       20  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
ps.

Kod: Zaznacz cały

$ smartctl -t
smartctl 6.6 2016-05-31 r4324 [i686-linux-3.16.0-4-686-pae] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=======> ARGUMENT REQUIRED FOR OPTION: t
=======> VALID ARGUMENTS ARE: offline, short, long, conveyance, force, vendor,N, select,M-N, pending,N, afterselect,[on|off] <=======

Use smartctl -h to get a usage summary
Awatar użytkownika
dedito
Moderator
Posty: 3512
Rejestracja: 18 listopada 2013, 21:07
Lokalizacja: Gliwice

Re: "JBD2: Detected IO errors" prezent mikołajkowy

Post autor: dedito »

Dysk nie zgłasza problemów.
Uzupełnij dane na temat wersji systemu, kernela i sprzętu.
Zablokowany