Skonfigurowałem serwer poczty POSTFIX + Dovecot i problem mój polega na tym że odbieram pocztę wysyłam w obrębie kont wewnętrznych lecz nie mogę wysłać poza mój serwer żadnej wiadomości.
Otrzymuje taki log :
Kod: Zaznacz cały
Sep 20 12:38:01 vps181665 postfix/smtpd[10203]: connect from public-gprs516554.centertel.pl[31.61.137.11]
Sep 20 12:38:06 vps181665 postfix/smtpd[10203]: NOQUEUE: reject: RCPT from public-gprs516554.centertel.pl[31.61.137.11]: 554 5.7.1 <michal.peterek@o2.pl>: Relay access denied; from=<kontakt@djpetix.eu> to=<michal.peterek@o2.pl> proto=ESMTP helo=<Laptop>
Sep 20 12:38:08 vps181665 postfix/smtpd[10203]: disconnect from public-gprs516554.centertel.pl[31.61.137.11]Całość skonfigurowałem według tego poradnika.
Gdy dodam linijkę
Kod: Zaznacz cały
smtpd_relay_restrictions = permit_mynetworks permit_sasl_authenticated defer_unauth_destinationotrzymuje komunikaty :
Kod: Zaznacz cały
Starting Postfix Mail Transport Agent: postfixpostconf: warning: /etc/postfix/main.cf: unused parameter: smtpd_relay_restrictions=permit_mynetworks permit_sasl_authenticated defer_unauth_destination
postconf: warning: /etc/postfix/main.cf: unused parameter: smtpd_relay_restrictions=permit_mynetworks permit_sasl_authenticated defer_unauth_destination
postconf: warning: /etc/postfix/main.cf: unused parameter: smtpd_relay_restrictions=permit_mynetworks permit_sasl_authenticated defer_unauth_destination
postconf: warning: /etc/postfix/main.cf: unused parameter: smtpd_relay_restrictions=permit_mynetworks permit_sasl_authenticated defer_unauth_destination
postconf: warning: /etc/postfix/main.cf: unused parameter: smtpd_relay_restrictions=permit_mynetworks permit_sasl_authenticated defer_unauth_destination
postconf: warning: /etc/postfix/main.cf: unused parameter: smtpd_relay_restrictions=permit_mynetworks permit_sasl_authenticated defer_unauth_destination
/usr/sbin/postconf: warning: /etc/postfix/main.cf: unused parameter: smtpd_relay_restrictions=permit_mynetworks permit_sasl_authenticated defer_unauth_destination
/usr/sbin/postconf: warning: /etc/postfix/main.cf: unused parameter: smtpd_relay_restrictions=permit_mynetworks permit_sasl_authenticated defer_unauth_destination
/usr/sbin/postconf: warning: /etc/postfix/main.cf: unused parameter: smtpd_relay_restrictions=permit_mynetworks permit_sasl_authenticated defer_unauth_destination
/usr/sbin/postconf: warning: /etc/postfix/main.cf: unused parameter: smtpd_relay_restrictions=permit_mynetworks permit_sasl_authenticated defer_unauth_destination
/usr/sbin/postconf: warning: /etc/postfix/main.cf: unused parameter: smtpd_relay_restrictions=permit_mynetworks permit_sasl_authenticated defer_unauth_destination
/usr/sbin/postconf: warning: /etc/postfix/main.cf: unused parameter: smtpd_relay_restrictions=permit_mynetworks permit_sasl_authenticated defer_unauth_destination
/usr/sbin/postconf: warning: /etc/postfix/main.cf: unused parameter: smtpd_relay_restrictions=permit_mynetworks permit_sasl_authenticated defer_unauth_destination
/usr/sbin/postconf: warning: /etc/postfix/main.cf: unused parameter: smtpd_relay_restrictions=permit_mynetworks permit_sasl_authenticated defer_unauth_destination
/usr/sbin/postconf: warning: /etc/postfix/main.cf: unused parameter: smtpd_relay_restrictions=permit_mynetworks permit_sasl_authenticated defer_unauth_destination
/usr/sbin/postconf: warning: /etc/postfix/main.cf: unused parameter: smtpd_relay_restrictions=permit_mynetworks permit_sasl_authenticated defer_unauth_destination
/usr/sbin/postconf: warning: /etc/postfix/main.cf: unused parameter: smtpd_relay_restrictions=permit_mynetworks permit_sasl_authenticated defer_unauth_destination
/usr/sbin/postconf: warning: /etc/postfix/main.cf: unused parameter: smtpd_relay_restrictions=permit_mynetworks permit_sasl_authenticated defer_unauth_destination
/usr/sbin/postconf: warning: /etc/postfix/main.cf: unused parameter: smtpd_relay_restrictions=permit_mynetworks permit_sasl_authenticated defer_unauth_destination
/usr/sbin/postconf: warning: /etc/postfix/main.cf: unused parameter: smtpd_relay_restrictions=permit_mynetworks permit_sasl_authenticated defer_unauth_destination
/usr/sbin/postconf: warning: /etc/postfix/main.cf: unused parameter: smtpd_relay_restrictions=permit_mynetworks permit_sasl_authenticated defer_unauth_destination
/usr/sbin/postconf: warning: /etc/postfix/main.cf: unused parameter: smtpd_relay_restrictions=permit_mynetworks permit_sasl_authenticated defer_unauth_destination
Pliki konfiguracyjne :
main.cf :
Kod: Zaznacz cały
# See /usr/share/postfix/main.cf.dist for a commented, more complete version
# Debian specific: Specifying a file name will cause the first
# line of that file to be used as the name. The Debian default
# is /etc/mailname.
#myorigin = /etc/mailname
smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU)
biff = no
# appending .domain is the MUA's job.
append_dot_mydomain = no
# Uncomment the next line to generate "delayed mail" warnings
#delay_warning_time = 4h
# Handing off local delivery to Dovecot's LMTP
virtual_transport = lmtp:unix :p rivate/dovecot-lmtp
#Enabling SMTP for authenticated users, and handing off authentication to Dovecot
smtpd_sasl_type = dovecot
smtpd_sasl_path = private/auth
smtpd_sasl_auth_enable = yes
smtpd_tls_auth_only = yes
readme_directory = no
#Virtual domains, users, and aliases
virtual_mailbox_domains = /etc/postfix/virtual_mailbox_domains
# virtual_mailbox_maps = /etc/postfix/virtual_mailbox_maps
# TLS parameters
smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem
smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key
smtpd_use_tls=yes
smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache
smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache
smtpd_relay_restrictions = permit_mynetworks permit_sasl_authenticated defer_unauth_destination
# See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for
# information on enabling SSL in the smtp client.
myhostname = meganet-serv.eu
alias_maps = hash:/etc/aliases
alias_database = hash:/etc/aliases
myorigin = /etc/mailname
mydestination = vps181665.ovh.net, localhost.ovh.net, localhost
relayhost =
mynetworks = 127.0.0.1, 92.222.5.4, localhost, djpetix.eu
mailbox_size_limit = 0
recipient_delimiter = +
inet_interfaces = all
master.cf :
Kod: Zaznacz cały
#
# Postfix master process configuration file. For details on the format
# of the file, see the master(5) manual page (command: "man 5 master").
#
# Do not forget to execute "postfix reload" after editing this file.
#
# ==========================================================================
# service type private unpriv chroot wakeup maxproc command + args
# (yes) (yes) (yes) (never) (100)
# ==========================================================================
smtp inet n - - - - smtpd
#smtp inet n - - - 1 postscreen
#smtpd pass - - - - - smtpd
#dnsblog unix - - - - 0 dnsblog
#tlsproxy unix - - - - 0 tlsproxy
submission inet n - - - - smtpd
# -o syslog_name=postfix/submission
# -o smtpd_tls_security_level=encrypt
# -o smtpd_sasl_auth_enable=yes
# -o smtpd_client_restrictions=permit_sasl_authenticated,reject
# -o milter_macro_daemon_name=ORIGINATING
smtps inet n - - - - smtpd
# -o syslog_name=postfix/smtps
# -o smtpd_tls_wrappermode=yes
# -o smtpd_sasl_auth_enable=yes
# -o smtpd_client_restrictions=permit_sasl_authenticated,reject
# -o milter_macro_daemon_name=ORIGINATING
#628 inet n - - - - qmqpd
pickup fifo n - - 60 1 pickup
cleanup unix n - - - 0 cleanup
qmgr fifo n - n 300 1 qmgr
#qmgr fifo n - n 300 1 oqmgr
tlsmgr unix - - - 1000? 1 tlsmgr
rewrite unix - - - - - trivial-rewrite
bounce unix - - - - 0 bounce
defer unix - - - - 0 bounce
trace unix - - - - 0 bounce
verify unix - - - - 1 verify
flush unix n - - 1000? 0 flush
proxymap unix - - n - - proxymap
proxywrite unix - - n - 1 proxymap
smtp unix - - - - - smtp
relay unix - - - - - smtp
# -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
showq unix n - - - - showq
error unix - - - - - error
retry unix - - - - - error
discard unix - - - - - discard
local unix - n n - - local
virtual unix - n n - - virtual
lmtp unix - - - - - lmtp
anvil unix - - - - 1 anvil
scache unix - - - - 1 scache
#
# ====================================================================
# Interfaces to non-Postfix software. Be sure to examine the manual
# pages of the non-Postfix software to find out what options it wants.
#
# Many of the following services use the Postfix pipe(8) delivery
# agent. See the pipe(8) man page for information about ${recipient}
# and other message envelope options.
# ====================================================================
#
# maildrop. See the Postfix MAILDROP_README file for details.
# Also specify in main.cf: maildrop_destination_recipient_limit=1
#
maildrop unix - n n - - pipe
flags=DRhu user=vmail argv=/usr/bin/maildrop -d ${recipient}
#
# ====================================================================
#
# Recent Cyrus versions can use the existing "lmtp" master.cf entry.
#
# Specify in cyrus.conf:
# lmtp cmd="lmtpd -a" listen="localhost:lmtp" proto=tcp4
#
# Specify in main.cf one or more of the following:
# mailbox_transport = lmtp:inet:localhost
# virtual_transport = lmtp:inet:localhost
#
# ====================================================================
#
# Cyrus 2.1.5 (Amos Gouaux)
# Also specify in main.cf: cyrus_destination_recipient_limit=1
#
#cyrus unix - n n - - pipe
# user=cyrus argv=/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user}
#
# ====================================================================
# Old example of delivery via Cyrus.
#
#old-cyrus unix - n n - - pipe
# flags=R user=cyrus argv=/cyrus/bin/deliver -e -m ${extension} ${user}
#
# ====================================================================
#
# See the Postfix UUCP_README file for configuration details.
#
uucp unix - n n - - pipe
flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
#
# Other external delivery methods.
#
ifmail unix - n n - - pipe
flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
bsmtp unix - n n - - pipe
flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient
scalemail-backend unix - n n - 2 pipe
flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension}
mailman unix - n n - - pipe
flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py
${nexthop} ${user}
dovecot.conf :
Kod: Zaznacz cały
## Dovecot configuration file
# If you're in a hurry, see [URL]http://wiki2.dovecot.org/QuickConfiguration[/URL]
# "doveconf -n" command gives a clean output of the changed settings. Use it
# instead of copy&pasting files when posting to the Dovecot mailing list.
# '#' character and everything after it is treated as comments. Extra spaces
# and tabs are ignored. If you want to use either of these explicitly, put the
# value inside quotes, eg.: key = "# char and trailing whitespace "
# Default values are shown for each setting, it's not required to uncomment
# those. These are exceptions to this though: No sections (e.g. namespace {})
# or plugin settings are added by default, they're listed only as examples.
# Paths are also just examples with the real defaults being based on configure
# options. The paths listed here are for configure --prefix=/usr
# --sysconfdir=/etc --localstatedir=/var
# Enable installed protocols
!include_try /usr/share/dovecot/protocols.d/*.protocol
# A comma separated list of IPs or hosts where to listen in for connections.
# "*" listens in all IPv4 interfaces, "::" listens in all IPv6 interfaces.
# If you want to specify non-default ports or anything more complex,
# edit conf.d/master.conf.
#listen = *, ::
# Base directory where to store runtime data.
#base_dir = /var/run/dovecot/
# Name of this instance. In multi-instance setup doveadm and other commands
# can use -i <instance_name> to select which instance is used (an alternative
# to -c <config_path>). The instance name is also added to Dovecot processes
# in ps output.
#instance_name = dovecot
# Greeting message for clients.
#login_greeting = Dovecot ready.
# Space separated list of trusted network ranges. Connections from these
# IPs are allowed to override their IP addresses and ports (for logging and
# for authentication checks). disable_plaintext_auth is also ignored for
# these networks. Typically you'd specify your IMAP proxy servers here.
#login_trusted_networks =
# Sepace separated list of login access check sockets (e.g. tcpwrap)
#login_access_sockets =
# With proxy_maybe=yes if proxy destination matches any of these IPs, don't do
# proxying. This isn't necessary normally, but may be useful if the destination
# IP is e.g. a load balancer's IP.
#auth_proxy_self =
# Show more verbose process titles (in ps). Currently shows user name and
# IP address. Useful for seeing who are actually using the IMAP processes
# (eg. shared mailboxes or if same uid is used for multiple accounts).
#verbose_proctitle = no
# Should all processes be killed when Dovecot master process shuts down.
# Setting this to "no" means that Dovecot can be upgraded without
# forcing existing client connections to close (although that could also be
# a problem if the upgrade is e.g. because of a security fix).
#shutdown_clients = yes
# If non-zero, run mail commands via this many connections to doveadm server,
# instead of running them directly in the same process.
#doveadm_worker_count = 0
# UNIX socket or host :p ort used for connecting to doveadm server
#doveadm_socket_path = doveadm-server
# Space separated list of environment variables that are preserved on Dovecot
# startup and passed down to all of its child processes. You can also give
# key=value pairs to always set specific settings.
#import_environment = TZ
##
## Dictionary server settings
##
# Dictionary can be used to store key=value lists. This is used by several
# plugins. The dictionary can be accessed either directly or though a
# dictionary server. The following dict block maps dictionary names to URIs
# when the server is used. These can then be referenced using URIs in format
# "proxy::<name>".
dict {
#quota = mysql:/etc/dovecot/dovecot-dict-sql.conf.ext
#expire = sqlite:/etc/dovecot/dovecot-dict-sql.conf.ext
}
# Most of the actual configuration gets included below. The filenames are
# first sorted by their ASCII value and parsed in that order. The 00-prefixes
# in filenames are intended to make it easier to understand the ordering.
!include conf.d/*.conf
# A config file can also tried to be included without giving an error if
# it's not found:
!include_try local.conf
Bardzo proszę o pomoc.
Pozdrawiam
