Instalacja sterowników NVidia GeForce 520MX

fnmirk · Post autor: **fnmirk** » 10 stycznia 2013, 12:21

Doinstaluj:

apt-get install firmware-linux-nonfree

Jeszcze przedstaw:

Kod: Zaznacz cały

lspci -v | grep -A10 -i "3D controller"
dpkg -l | grep $(uname -r)

Dodane:

&quot pisze: otypoks:
Kod: Zaznacz cały
optirun --debug glxspheres /home/daniel/glx.txt
Plik się nie tworzy z powodu wyskakującego czarnego ekranu...

Plik się nie utworzy jak nie wykonasz poprawnie polecenia.

&quot pisze:
Kod: Zaznacz cały
optirun --debug glxspheres &>plik

sullivan · Post autor: **sullivan** » 11 stycznia 2013, 07:13

Doinstalowane.

Kod: Zaznacz cały

01:00.0 3D controller: NVIDIA Corporation GF119 [GeForce GT 520MX] (rev ff) (prog-if ff)
        !!! Unknown header type 7f


02:00.0 Network controller: Intel Corporation Centrino Wireless-N 130 (rev 34)
        Subsystem: Intel Corporation Centrino Wireless-N 130 BGN
        Flags: bus master, fast devsel, latency 0, IRQ 44
        Memory at e1900000 (64-bit, non-prefetchable) [size=8K]
        Capabilities: <access denied>
        Kernel driver in use: iwlwifi


03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)

Kod: Zaznacz cały

daniel@debian:~$ dpkg -l | grep $(uname -r)
ii  linux-headers-3.2.0-4-amd64            3.2.35-2                           amd64        Header files for Linux 3.2.0-4-amd64
ii  linux-image-3.2.0-4-amd64              3.2.35-2                           amd64        Linux 3.2 for 64-bit PCs

Po poprawnym wykonaniu komendy:

Kod: Zaznacz cały

optirun --debug glxspheres &>optirun.txt

Plik się utworzył, ale jest pusty i wyskoczył również ten sam czarny ekran z napisami, które umieściłem już w logu, który znalazłem.

fnmirk · Post autor: **fnmirk** » 11 stycznia 2013, 19:47

Nie ma w systemie zainstalowanego poprawnie sterownika do tej karty.

Spróbuj według tego opisu:
http://debian.linux.pl/threads/27845-Ur ... post153647
uruchomić komputer. Interesuje mnie ta opcja z dograniem modułów. I sprawdź to wszystko co do tej pory było proponowane.

sullivan · Post autor: **sullivan** » 13 stycznia 2013, 16:34

Aż dziwne, że nie ma zainstalowanego poprawnie sterownika do tej karty. Coś takiego się dzieje odkąd zainstalowałem system i nic w nim nie grzebałem. Nienawidzę takich problemów od samego początku, bo aż się odechciewa.

Spróbuję jeszcze uruchomić system według opisu, który podałeś. Jak rozumiem mam tutaj wrzucić polecenia m.in.

Kod: Zaznacz cały

lspci -k
lspci -n

i całą resztę na Debianie uruchomionym z SystemRescueCD i dogranymi modułami z jądra tego systemu, tak?

Dodane:
Inaczej. Zainstalowałem Kubuntu 12.10. Problem jest identyczny jak w Debianie z tym, że sprzęt jest wykrywany poprawnie.

Kod: Zaznacz cały

root@Sullivan:/home/daniel# lspci -k
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
        Subsystem: Samsung Electronics Co Ltd Device c0b6
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
        Kernel driver in use: pcieport
        Kernel modules: shpchp
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
        Subsystem: Samsung Electronics Co Ltd Device c0b6
        Kernel driver in use: i915
        Kernel modules: i915
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
        Subsystem: Samsung Electronics Co Ltd Device c0b6
        Kernel driver in use: mei
        Kernel modules: mei
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
        Subsystem: Samsung Electronics Co Ltd Device c0b6
        Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04)
        Subsystem: Samsung Electronics Co Ltd Device c0b6
        Kernel driver in use: snd_hda_intel
        Kernel modules: snd-hda-intel
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4)
        Kernel driver in use: pcieport
        Kernel modules: shpchp
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4)
        Kernel driver in use: pcieport
        Kernel modules: shpchp
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
        Subsystem: Samsung Electronics Co Ltd Device c0b6
        Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 04)
        Subsystem: Samsung Electronics Co Ltd Device c0b6
        Kernel modules: lpc_ich
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04)
        Subsystem: Samsung Electronics Co Ltd Device c0b6
        Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04)
        Subsystem: Samsung Electronics Co Ltd Device c0b6
        Kernel modules: i2c-i801                                                                                                                       
01:00.0 3D controller: NVIDIA Corporation GF119 [GeForce GT 520MX] (rev a1)                                                                            
        Subsystem: Samsung Electronics Co Ltd Device c0b6
        Kernel modules: nouveau, nvidiafb
02:00.0 Network controller: Intel Corporation Centrino Wireless-N 130 (rev 34)
        Subsystem: Intel Corporation Centrino Wireless-N 130 BGN
        Kernel driver in use: iwlwifi
        Kernel modules: iwlwifi
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
        Subsystem: Samsung Electronics Co Ltd Device c0b6
        Kernel driver in use: r8169
        Kernel modules: r8169

Kod: Zaznacz cały

root@Sullivan:/home/daniel# lspci -v | grep -A15 -i "3D Controller"
01:00.0 3D controller: NVIDIA Corporation GF119 [GeForce GT 520MX] (rev a1)
        Subsystem: Samsung Electronics Co Ltd Device c0b6
        Flags: fast devsel, IRQ 16
        Memory at e0000000 (32-bit, non-prefetchable) [size=16M]
        Memory at b0000000 (64-bit, prefetchable) [size=256M]
        Memory at c0000000 (64-bit, prefetchable) [size=32M]
        I/O ports at 3000 [size=200]
        Expansion ROM at e1000000 [disabled] [size=512K]
        Capabilities: [60] Power Management version 3
        Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
        Capabilities: [78] Express Endpoint, MSI 00
        Capabilities: [b4] Vendor Specific Information: Len=14 <?>
        Capabilities: [100] Virtual Channel
        Capabilities: [128] Power Budgeting <?>
        Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
        Kernel modules: nouveau, nvidiafb

Kod: Zaznacz cały

root@Sullivan:/home/daniel# lspci -v | grep -A15 -i "VGA compatible controller"
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller])
        Subsystem: Samsung Electronics Co Ltd Device c0b6
        Flags: bus master, fast devsel, latency 0, IRQ 43
        Memory at e1400000 (64-bit, non-prefetchable) [size=4M]
        Memory at d0000000 (64-bit, prefetchable) [size=256M]
        I/O ports at 4000 [size=200]
        Expansion ROM at <unassigned> [disabled]
        Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
        Capabilities: [d0] Power Management version 2
        Capabilities: [a4] PCI Advanced Features
        Kernel driver in use: i915
        Kernel modules: i915

Kod: Zaznacz cały

root@Sullivan:/home/daniel# cat /var/log/Xorg.0.log
[    19.981] 
X.Org X Server 1.13.0
Release Date: 2012-09-05
[    19.981] X Protocol Version 11, Revision 0
[    19.981] Build Operating System: Linux 3.2.0-32-generic x86_64 Ubuntu
[    19.981] Current Operating System: Linux Sullivan 3.5.0-21-generic #32-Ubuntu SMP Tue Dec 11 18:51:59 UTC 2012 x86_64
[    19.981] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-21-generic root=UUID=93d0a1ab-26eb-4c9f-9cae-4e639f8dd484 ro quiet splash vt.handoff=7
[    19.981] Build Date: 27 November 2012  07:44:35AM
[    19.981] xorg-server 2:1.13.0-0ubuntu6.1 (For technical support please see [URL]http://www.ubuntu.com/support[/URL]) 
[    19.981] Current version of pixman: 0.26.0
[    19.981]    Before reporting problems, check [URL]http://wiki.x.org[/URL]
        to make sure that you have the latest version.
[    19.981] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    19.981] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jan 13 15:44:19 2013
[    20.007] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    20.073] (==) No Layout section.  Using the first Screen section.
[    20.073] (==) No screen section available. Using defaults.
[    20.073] (**) |-->Screen "Default Screen Section" (0)
[    20.073] (**) |   |-->Monitor "<default monitor>"
[    20.073] (==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
[    20.073] (==) Automatically adding devices
[    20.073] (==) Automatically enabling devices
[    20.073] (==) Automatically adding GPU devices
[    20.093] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    20.093]    Entry deleted from font path.
[    20.093] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    20.093]    Entry deleted from font path.
[    20.093] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    20.093]    Entry deleted from font path.
[    20.094] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    20.094]    Entry deleted from font path.
[    20.094] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    20.094]    Entry deleted from font path.
[    20.094] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    20.094]    Entry deleted from font path.
[    20.094] (==) FontPath set to:
        /usr/share/fonts/X11/misc,
        /usr/share/fonts/X11/Type1,
        built-ins
[    20.094] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    20.094] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
[    20.094] (II) Loader magic: 0x7feed4952c40
[    20.094] (II) Module ABI versions:
[    20.094]    X.Org ANSI C Emulation: 0.4
[    20.094]    X.Org Video Driver: 13.0
[    20.094]    X.Org XInput driver : 18.0
[    20.094]    X.Org Server Extension : 7.0
[    20.094] (II) config/udev: Adding drm device (/dev/dri/card0)
[    20.095] (--) PCI:*(0:0:2:0) 8086:0116:144d:c0b6 rev 9, Mem @ 0xe1400000/4194304, 0xd0000000/268435456, I/O @ 0x00004000/64
[    20.095] (--) PCI: (0:1:0:0) 10de:1051:144d:c0b6 rev 161, Mem @ 0xe0000000/16777216, 0xb0000000/268435456, 0xc0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288
[    20.095] (II) Open ACPI successful (/var/run/acpid.socket)
[    20.096] Initializing built-in extension Generic Event Extension
[    20.096] Initializing built-in extension SHAPE
[    20.096] Initializing built-in extension MIT-SHM
[    20.096] Initializing built-in extension XInputExtension
[    20.096] Initializing built-in extension XTEST
[    20.096] Initializing built-in extension BIG-REQUESTS
[    20.096] Initializing built-in extension SYNC
[    20.096] Initializing built-in extension XKEYBOARD
[    20.096] Initializing built-in extension XC-MISC
[    20.096] Initializing built-in extension SECURITY
[    20.096] Initializing built-in extension XINERAMA
[    20.096] Initializing built-in extension XFIXES
[    20.096] Initializing built-in extension RENDER
[    20.096] Initializing built-in extension RANDR
[    20.096] Initializing built-in extension COMPOSITE
[    20.096] Initializing built-in extension DAMAGE
[    20.096] Initializing built-in extension MIT-SCREEN-SAVER
[    20.096] Initializing built-in extension DOUBLE-BUFFER
[    20.096] Initializing built-in extension RECORD
[    20.096] Initializing built-in extension DPMS
[    20.096] Initializing built-in extension X-Resource
[    20.096] Initializing built-in extension XVideo
[    20.096] Initializing built-in extension XVideo-MotionCompensation
[    20.096] Initializing built-in extension XFree86-VidModeExtension
[    20.096] Initializing built-in extension XFree86-DGA
[    20.096] Initializing built-in extension XFree86-DRI
[    20.096] Initializing built-in extension DRI2
[    20.096] (II) LoadModule: "glx"
[    20.111] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    20.129] (II) Module glx: vendor="X.Org Foundation"
[    20.129]    compiled for 1.13.0, module version = 1.0.0
[    20.129]    ABI class: X.Org Server Extension, version 7.0
[    20.129] (==) AIGLX enabled
[    20.129] Loading extension GLX
[    20.129] (==) Matched intel as autoconfigured driver 0
[    20.129] (==) Matched intel as autoconfigured driver 1
[    20.129] (==) Matched vesa as autoconfigured driver 2
[    20.129] (==) Matched modesetting as autoconfigured driver 3
[    20.129] (==) Matched fbdev as autoconfigured driver 4
[    20.130] (==) Assigned the driver to the xf86ConfigLayout
[    20.130] (II) LoadModule: "intel"
[    20.130] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    20.174] (II) Module intel: vendor="X.Org Foundation"
[    20.174]    compiled for 1.13.0, module version = 2.20.9
[    20.174]    Module class: X.Org Video Driver
[    20.174]    ABI class: X.Org Video Driver, version 13.0
[    20.174] (II) LoadModule: "vesa"
[    20.174] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    20.184] (II) Module vesa: vendor="X.Org Foundation"
[    20.184]    compiled for 1.12.99.902, module version = 2.3.2
[    20.184]    Module class: X.Org Video Driver
[    20.184]    ABI class: X.Org Video Driver, version 13.0
[    20.184] (II) LoadModule: "modesetting"
[    20.184] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    20.187] (II) Module modesetting: vendor="X.Org Foundation"
[    20.187]    compiled for 1.13.0, module version = 0.5.0
[    20.187]    Module class: X.Org Video Driver
[    20.187]    ABI class: X.Org Video Driver, version 13.0
[    20.187] (II) LoadModule: "fbdev"
[    20.187] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    20.191] (II) Module fbdev: vendor="X.Org Foundation"
[    20.191]    compiled for 1.12.99.902, module version = 0.4.3
[    20.191]    Module class: X.Org Video Driver
[    20.191]    ABI class: X.Org Video Driver, version 13.0
[    20.191] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
        i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
        E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
        965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
        4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
        Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
        Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
        Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
        Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
        Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
        Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
        Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
        Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
        Haswell Server (GT2+), Haswell SDV Desktop (GT1),
        Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
        Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
        Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
        Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
        Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
        Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
        Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
        Haswell ULT Server (GT1), Haswell ULT Server (GT2),
        Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
        Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
        Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
        Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
        Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
        ValleyView PO board
[    20.192] (II) VESA: driver for VESA chipsets: vesa
[    20.192] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    20.192] (II) FBDEV: driver for framebuffer: fbdev
[    20.192] (++) using VT number 7


[    20.192] (II) intel(0): using device path '/dev/dri/card0'
[    20.192] (WW) Falling back to old probe method for vesa
[    20.192] (WW) Falling back to old probe method for modesetting
[    20.192] (WW) Falling back to old probe method for fbdev
[    20.192] (II) Loading sub module "fbdevhw"
[    20.192] (II) LoadModule: "fbdevhw"
[    20.200] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    20.225] (II) Module fbdevhw: vendor="X.Org Foundation"
[    20.225]    compiled for 1.13.0, module version = 0.0.2
[    20.225]    ABI class: X.Org Video Driver, version 13.0
[    20.225] (II) intel(0): Creating default Display subsection in Screen section
        "Default Screen Section" for depth/fbbpp 24/32
[    20.225] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    20.225] (==) intel(0): RGB weight 888
[    20.225] (==) intel(0): Default visual is TrueColor
[    20.225] (--) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2)
[    20.225] (**) intel(0): Relaxed fencing enabled
[    20.225] (**) intel(0): Wait on SwapBuffers? enabled
[    20.225] (**) intel(0): Triple buffering? enabled
[    20.225] (**) intel(0): Framebuffer tiled
[    20.225] (**) intel(0): Pixmaps tiled
[    20.225] (**) intel(0): 3D buffers tiled
[    20.237] (**) intel(0): SwapBuffers wait enabled
[    20.238] (==) intel(0): video overlay key set to 0x101fe
[    20.238] (II) intel(0): Output LVDS1 has no monitor section
[    20.238] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video1
[    20.238] (II) intel(0): Output VGA1 has no monitor section
[    20.238] (II) intel(0): Output HDMI1 has no monitor section
[    20.288] (II) intel(0): Output DP1 has no monitor section
[    20.288] (II) intel(0): EDID for output LVDS1
[    20.288] (II) intel(0): Manufacturer: SEC  Model: 324a  Serial#: 0
[    20.288] (II) intel(0): Year: 2011  Week: 0
[    20.288] (II) intel(0): EDID Version: 1.3
[    20.288] (II) intel(0): Digital Display Input
[    20.288] (II) intel(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    20.288] (II) intel(0): Gamma: 2.20
[    20.288] (II) intel(0): No DPMS capabilities specified
[    20.288] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    20.288] (II) intel(0): First detailed timing is preferred mode
[    20.288] (II) intel(0): redX: 0.570 redY: 0.340   greenX: 0.330 greenY: 0.560
[    20.288] (II) intel(0): blueX: 0.160 blueY: 0.135   whiteX: 0.313 whiteY: 0.329
[    20.288] (II) intel(0): Manufacturer's mask: 0
[    20.288] (II) intel(0): Supported detailed timing:
[    20.288] (II) intel(0): clock: 70.7 MHz   Image Size:  344 x 194 mm
[    20.288] (II) intel(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1486 h_border: 0
[    20.288] (II) intel(0): v_active: 768  v_sync: 770  v_sync_end 775 v_blanking: 792 v_border: 0
[    20.288] (II) intel(0): Unknown vendor-specific block f
[    20.288] (II) intel(0):  SAMSUNG
[    20.288] (II) intel(0):  LTN156AT190
[    20.288] (II) intel(0): EDID (in hex):
[    20.288] (II) intel(0):     00ffffffffffff004ca34a3200000000
[    20.288] (II) intel(0):     00150103802213780a09259257548f29
[    20.288] (II) intel(0):     22505400000001010101010101010101
[    20.288] (II) intel(0):     0101010101019e1b5678500018303020
[    20.288] (II) intel(0):     250058c2100000190000000f00000000
[    20.288] (II) intel(0):     00000000002387026401000000fe0053
[    20.288] (II) intel(0):     414d53554e470a2020202020000000fe
[    20.288] (II) intel(0):     004c544e31353641543139300a2000b4
[    20.288] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    20.288] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    20.288] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    20.288] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    20.288] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    20.288] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    20.288] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    20.288] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    20.288] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    20.288] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    20.288] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[    20.288] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    20.288] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    20.288] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    20.288] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[    20.288] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[    20.288] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    20.288] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    20.288] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[    20.288] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[    20.288] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[    20.288] (II) intel(0): Printing probed modes for output LVDS1
[    20.288] (II) intel(0): Modeline "1366x768"x60.1   70.70  1366 1414 1446 1486  768 770 775 792 -hsync -vsync (47.6 kHz eP)
[    20.288] (II) intel(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
[    20.288] (II) intel(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
[    20.288] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    20.288] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    20.288] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    20.288] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    20.288] (II) intel(0): EDID for output VGA1
[    20.289] (II) intel(0): EDID for output HDMI1
[    20.340] (II) intel(0): EDID for output DP1
[    20.340] (II) intel(0): Output LVDS1 connected
[    20.340] (II) intel(0): Output VGA1 disconnected
[    20.340] (II) intel(0): Output HDMI1 disconnected
[    20.340] (II) intel(0): Output DP1 disconnected
[    20.340] (II) intel(0): Using exact sizes for initial modes
[    20.340] (II) intel(0): Output LVDS1 using initial mode 1366x768
[    20.340] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    20.340] (II) intel(0): Kernel page flipping support detected, enabling
[    20.340] (==) intel(0): DPI set to (96, 96)
[    20.340] (II) Loading sub module "fb"
[    20.340] (II) LoadModule: "fb"
[    20.340] (II) Loading /usr/lib/xorg/modules/libfb.so
[    20.340] (II) Module fb: vendor="X.Org Foundation"
[    20.340]    compiled for 1.13.0, module version = 1.0.0
[    20.340]    ABI class: X.Org ANSI C Emulation, version 0.4
[    20.340] (II) Loading sub module "dri2"
[    20.340] (II) LoadModule: "dri2"
[    20.340] (II) Module "dri2" already built-in
[    20.340] (II) UnloadModule: "vesa"
[    20.340] (II) Unloading vesa
[    20.340] (II) UnloadModule: "modesetting"
[    20.340] (II) Unloading modesetting
[    20.340] (II) UnloadModule: "fbdev"
[    20.340] (II) Unloading fbdev
[    20.340] (II) UnloadSubModule: "fbdevhw"
[    20.340] (II) Unloading fbdevhw
[    20.340] (==) Depth 24 pixmap format is 32 bpp
[    20.341] (II) intel(0): [DRI2] Setup complete
[    20.341] (II) intel(0): [DRI2]   DRI driver: i965
[    20.341] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[    20.343] (II) UXA(0): Driver registered support for the following operations:
[    20.343] (II)         solid
[    20.343] (II)         copy
[    20.343] (II)         composite (RENDER acceleration)
[    20.343] (II)         put_image
[    20.343] (II)         get_image
[    20.343] (==) intel(0): Backing store disabled
[    20.343] (==) intel(0): Silken mouse enabled
[    20.343] (II) intel(0): Initializing HW Cursor
[    20.343] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    20.344] (==) intel(0): DPMS enabled
[    20.344] (==) intel(0): Intel XvMC decoder enabled
[    20.344] (II) intel(0): Set up textured video
[    20.344] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[    20.344] (II) intel(0): direct rendering: DRI2 Enabled
[    20.344] (==) intel(0): hotplug detection: "enabled"
[    20.364] (--) RandR disabled
[    20.460] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    20.460] (II) AIGLX: enabled GLX_INTEL_swap_event
[    20.460] (II) AIGLX: enabled GLX_ARB_create_context
[    20.460] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    20.460] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[    20.460] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    20.460] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    20.460] (II) AIGLX: Loaded and initialized i965
[    20.460] (II) GLX: Initialized DRI2 GL provider for screen 0
[    20.460] (II) intel(0): Setting screen physical size to 361 x 203
[    20.533] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    20.542] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    20.542] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    20.542] (II) LoadModule: "evdev"
[    20.542] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    20.573] (II) Module evdev: vendor="X.Org Foundation"
[    20.573]    compiled for 1.13.0, module version = 2.7.3
[    20.573]    Module class: X.Org XInput Driver
[    20.573]    ABI class: X.Org XInput driver, version 18.0
[    20.573] (II) Using input driver 'evdev' for 'Power Button'
[    20.573] (**) Power Button: always reports core events
[    20.573] (**) evdev: Power Button: Device: "/dev/input/event2"
[    20.573] (--) evdev: Power Button: Vendor 0 Product 0x1
[    20.573] (--) evdev: Power Button: Found keys
[    20.573] (II) evdev: Power Button: Configuring as keyboard
[    20.573] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    20.573] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    20.573] (**) Option "xkb_rules" "evdev"
[    20.573] (**) Option "xkb_model" "pc105"
[    20.573] (**) Option "xkb_layout" "pl"
[    20.575] (II) XKB: reuse xkmfile /var/lib/xkb/server-61818C6B46DD4F01AE1F641F27B555591612208F.xkm
[    20.590] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[    20.590] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    20.590] (II) Using input driver 'evdev' for 'Video Bus'
[    20.590] (**) Video Bus: always reports core events
[    20.590] (**) evdev: Video Bus: Device: "/dev/input/event7"
[    20.590] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    20.590] (--) evdev: Video Bus: Found keys
[    20.590] (II) evdev: Video Bus: Configuring as keyboard
[    20.590] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input7/event7"
[    20.590] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    20.590] (**) Option "xkb_rules" "evdev"
[    20.590] (**) Option "xkb_model" "pc105"
[    20.590] (**) Option "xkb_layout" "pl"
[    20.591] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[    20.591] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    20.591] (II) Using input driver 'evdev' for 'Video Bus'
[    20.591] (**) Video Bus: always reports core events
[    20.591] (**) evdev: Video Bus: Device: "/dev/input/event6"
[    20.591] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    20.591] (--) evdev: Video Bus: Found keys
[    20.591] (II) evdev: Video Bus: Configuring as keyboard
[    20.591] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2c/LNXVIDEO:00/input/input6/event6"
[    20.591] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    20.591] (**) Option "xkb_rules" "evdev"
[    20.591] (**) Option "xkb_model" "pc105"
[    20.591] (**) Option "xkb_layout" "pl"
[    20.591] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    20.591] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    20.591] (II) Using input driver 'evdev' for 'Power Button'
[    20.591] (**) Power Button: always reports core events
[    20.591] (**) evdev: Power Button: Device: "/dev/input/event1"
[    20.591] (--) evdev: Power Button: Vendor 0 Product 0x1
[    20.591] (--) evdev: Power Button: Found keys
[    20.591] (II) evdev: Power Button: Configuring as keyboard
[    20.591] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[    20.591] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[    20.591] (**) Option "xkb_rules" "evdev"
[    20.591] (**) Option "xkb_model" "pc105"
[    20.591] (**) Option "xkb_layout" "pl"
[    20.592] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    20.592] (II) No input driver specified, ignoring this device.
[    20.592] (II) This device may have been added with another device file.
[    20.592] (II) config/udev: Adding drm device (/dev/dri/card0)
[    20.592] (II) config/udev: Adding input device WebCam SCB-1100N (/dev/input/event8)
[    20.592] (**) WebCam SCB-1100N: Applying InputClass "evdev keyboard catchall"
[    20.592] (II) Using input driver 'evdev' for 'WebCam SCB-1100N'
[    20.592] (**) WebCam SCB-1100N: always reports core events
[    20.592] (**) evdev: WebCam SCB-1100N: Device: "/dev/input/event8"
[    20.592] (--) evdev: WebCam SCB-1100N: Vendor 0x2232 Product 0x1008
[    20.592] (--) evdev: WebCam SCB-1100N: Found keys
[    20.592] (II) evdev: WebCam SCB-1100N: Configuring as keyboard
[    20.592] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input8/event8"
[    20.592] (II) XINPUT: Adding extended input device "WebCam SCB-1100N" (type: KEYBOARD, id 10)
[    20.592] (**) Option "xkb_rules" "evdev"
[    20.592] (**) Option "xkb_model" "pc105"
[    20.592] (**) Option "xkb_layout" "pl"
[    20.593] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
[    20.593] (II) No input driver specified, ignoring this device.
[    20.593] (II) This device may have been added with another device file.
[    20.593] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event11)
[    20.593] (II) No input driver specified, ignoring this device.
[    20.593] (II) This device may have been added with another device file.
[    20.593] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event12)
[    20.593] (II) No input driver specified, ignoring this device.
[    20.593] (II) This device may have been added with another device file.
[    20.593] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event4)
[    20.593] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[    20.593] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[    20.593] (**) Logitech USB Receiver: always reports core events
[    20.593] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event4"
[    20.593] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[    20.593] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[    20.593] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[    20.593] (--) evdev: Logitech USB Receiver: Found relative axes
[    20.593] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[    20.593] (II) evdev: Logitech USB Receiver: Configuring as mouse
[    20.593] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[    20.593] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[    20.594] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    20.594] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input4/event4"
[    20.594] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 11)
[    20.594] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[    20.594] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[    20.594] (**) Logitech USB Receiver: (accel) acceleration profile 0
[    20.594] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[    20.594] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[    20.594] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[    20.594] (II) No input driver specified, ignoring this device.
[    20.594] (II) This device may have been added with another device file.
[    20.594] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event5)
[    20.594] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[    20.594] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[    20.594] (**) Logitech USB Receiver: always reports core events
[    20.594] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event5"
[    20.594] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[    20.594] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[    20.594] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[    20.594] (--) evdev: Logitech USB Receiver: Found relative axes
[    20.594] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[    20.594] (--) evdev: Logitech USB Receiver: Found absolute axes
[    20.594] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[    20.594] (--) evdev: Logitech USB Receiver: Found keys
[    20.594] (II) evdev: Logitech USB Receiver: Configuring as mouse
[    20.594] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[    20.594] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[    20.594] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[    20.594] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    20.594] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/input/input5/event5"
[    20.594] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 12)
[    20.594] (**) Option "xkb_rules" "evdev"
[    20.594] (**) Option "xkb_model" "pc105"
[    20.594] (**) Option "xkb_layout" "pl"
[    20.595] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[    20.595] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[    20.595] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[    20.595] (**) Logitech USB Receiver: (accel) acceleration profile 0
[    20.595] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[    20.595] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[    20.595] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[    20.595] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    20.595] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    20.595] (**) AT Translated Set 2 keyboard: always reports core events
[    20.595] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[    20.595] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    20.595] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    20.595] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    20.595] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[    20.595] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[    20.595] (**) Option "xkb_rules" "evdev"
[    20.595] (**) Option "xkb_model" "pc105"
[    20.595] (**) Option "xkb_layout" "pl"
[    20.595] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event9)
[    20.596] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[    20.596] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[    20.596] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[    20.596] (II) LoadModule: "synaptics"
[    20.596] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    20.603] (II) Module synaptics: vendor="X.Org Foundation"
[    20.603]    compiled for 1.12.99.905, module version = 1.6.2
[    20.603]    Module class: X.Org XInput Driver
[    20.603]    ABI class: X.Org XInput driver, version 18.0
[    20.603] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[    20.603] (**) ETPS/2 Elantech Touchpad: always reports core events
[    20.603] (**) Option "Device" "/dev/input/event9"
[    20.603] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 2940
[    20.603] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 1400
[    20.603] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[    20.603] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[    20.603] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
[    20.603] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[    20.603] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    20.603] (**) ETPS/2 Elantech Touchpad: always reports core events
[    20.603] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event9"
[    20.603] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 14)
[    20.603] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[    20.603] (**) synaptics: ETPS/2 Elantech Touchpad: MaxSpeed is now 1.75
[    20.603] (**) synaptics: ETPS/2 Elantech Touchpad: AccelFactor is now 0.061
[    20.603] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[    20.603] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[    20.604] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[    20.604] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[    20.604] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    20.604] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[    20.604] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[    26.490] (II) intel(0): EDID vendor "SEC", prod id 12874
[    26.490] (II) intel(0): Printing DDC gathered Modelines:
[    26.490] (II) intel(0): Modeline "1366x768"x0.0   70.70  1366 1414 1446 1486  768 770 775 792 -hsync -vsync (47.6 kHz eP)
[    27.602] (II) intel(0): EDID vendor "SEC", prod id 12874
[    27.602] (II) intel(0): Printing DDC gathered Modelines:
[    27.602] (II) intel(0): Modeline "1366x768"x0.0   70.70  1366 1414 1446 1486  768 770 775 792 -hsync -vsync (47.6 kHz eP)
[    39.838] (II) intel(0): EDID vendor "SEC", prod id 12874
[    39.838] (II) intel(0): Printing DDC gathered Modelines:
[    39.838] (II) intel(0): Modeline "1366x768"x0.0   70.70  1366 1414 1446 1486  768 770 775 792 -hsync -vsync (47.6 kHz eP)
[  1920.639] (II) intel(0): EDID vendor "SEC", prod id 12874
[  1920.639] (II) intel(0): Printing DDC gathered Modelines:
[  1920.639] (II) intel(0): Modeline "1366x768"x0.0   70.70  1366 1414 1446 1486  768 770 775 792 -hsync -vsync (47.6 kHz eP)
[  1944.048] (II) intel(0): EDID vendor "SEC", prod id 12874
[  1944.049] (II) intel(0): Printing DDC gathered Modelines:
[  1944.049] (II) intel(0): Modeline "1366x768"x0.0   70.70  1366 1414 1446 1486  768 770 775 792 -hsync -vsync (47.6 kHz eP)
[  1944.103] (II) intel(0): EDID vendor "SEC", prod id 12874
[  1944.103] (II) intel(0): Printing DDC gathered Modelines:
[  1944.103] (II) intel(0): Modeline "1366x768"x0.0   70.70  1366 1414 1446 1486  768 770 775 792 -hsync -vsync (47.6 kHz eP)
[  1944.153] (II) intel(0): EDID vendor "SEC", prod id 12874
[  1944.153] (II) intel(0): Printing DDC gathered Modelines:
[  1944.153] (II) intel(0): Modeline "1366x768"x0.0   70.70  1366 1414 1446 1486  768 770 775 792 -hsync -vsync (47.6 kHz eP)
[  1944.205] (II) intel(0): EDID vendor "SEC", prod id 12874
[  1944.205] (II) intel(0): Printing DDC gathered Modelines:
[  1944.205] (II) intel(0): Modeline "1366x768"x0.0   70.70  1366 1414 1446 1486  768 770 775 792 -hsync -vsync (47.6 kHz eP)
[  2021.325] (II) XKB: reuse xkmfile /var/lib/xkb/server-8827F000C3EF2AB2257AD3E684A4F7489BB4D66B.xkm

Kod: Zaznacz cały

root@Sullivan:/home/daniel# lspci -n
00:00.0 0600: 8086:0104 (rev 09)
00:01.0 0604: 8086:0101 (rev 09)
00:02.0 0300: 8086:0116 (rev 09)
00:16.0 0780: 8086:1c3a (rev 04)
00:1a.0 0c03: 8086:1c2d (rev 04)
00:1b.0 0403: 8086:1c20 (rev 04)
00:1c.0 0604: 8086:1c10 (rev b4)
00:1c.3 0604: 8086:1c16 (rev b4)
00:1d.0 0c03: 8086:1c26 (rev 04)
00:1f.0 0601: 8086:1c49 (rev 04)
00:1f.2 0106: 8086:1c03 (rev 04)
00:1f.3 0c05: 8086:1c22 (rev 04)
01:00.0 0302: 10de:1051 (rev a1)
02:00.0 0280: 8086:0896 (rev 34)
03:00.0 0200: 10ec:8168 (rev 06)

Mimo tego, że sprzęt jest wykrywany prawidłowo, to bumblebee nie pomaga i wyskakuje ten sam czarny ekran z napisami z loga. Bladego pojęcia nie mam o co tu chodzi.

fnmirk · Post autor: **fnmirk** » 13 stycznia 2013, 17:07

W Ubuntu został użyty sterownik otwarty nouveau, a do działania bumblebee potrzebny jest zamknięty sterownik ze strony domowej producenta.

Nie było sensu instalować Ubuntu, ten sam efekt uzyskałbyś według opisu:
http://debian.linux.pl/threads/27845-Ur ... post153647

Interesowało mnie czy w ogóle ta karta jest rozpoznawana w systemie.
http://kmuto.jp/debian/hcl/

W Ubuntu musisz to zrobić tak:
https://wiki.ubuntu.com/Bumblebee

sullivan · Post autor: **sullivan** » 13 stycznia 2013, 19:05

fnmirk, dokładnie tak zrobiłem. Nie instalowałem bumblebee metodą z Debiana tylko właśnie z tej strony i problem dalej istnieje z czarnym ekranem. Jak zainstalowałem sterownik zamknięty to zabrakło akceleracji 3D, a polecenie optirun dalej zwracał czarny ekran z takim samym błędem.

fnmirk · Post autor: **fnmirk** » 13 stycznia 2013, 20:38

A dla Debiana musi działać to:
http://suwako.nomanga.net/

Kod: Zaznacz cały

wget -O - http://suwako.nomanga.net/suwako.asc | apt-key add -

Jako root:

Kod: Zaznacz cały

nano -w /etc/apt/sources.list

Dodajesz:

Kod: Zaznacz cały

deb http://suwako.nomanga.net/debian sid main contrib
#deb-src http://suwako.nomanga.net/debian sid main

Kod: Zaznacz cały

apt-get update
apt-get install bumblebee bumblebee-nvidia
adduser $USER bumblebee
reboot

Jeśli zrobiłeś wszystko w poprawnie i czy sprzęt jest obsługiwany przez strowniki NVIDIA / Nouveau to bbswitch powinieneś być w stanie uruchomić programy z pomocą optirun.

Kod: Zaznacz cały

optirun glxgears -info

http://askubuntu.com/questions/155898/h ... 20-working

fnmirk · Post autor: **fnmirk** » 13 stycznia 2013, 20:39

To powinno pozwolić na instalację sterownika:
http://askubuntu.com/questions/155898/h ... 20-working

sullivan · Post autor: **sullivan** » 18 stycznia 2013, 09:54

fnmirk Udało mi się zainstalować ten sterownik. Dodałem do czarnej listy te wpisy

Kod: Zaznacz cały


blacklist vga16fb 
blacklist nouveau 
blacklist rivafb 
blacklist nvidiafb 
blacklist rivatv

I zainstalowałem sterowniki zamknięte od producenta na kompilatorze gcc-4.6.

Kod: Zaznacz cały

        01:00.0 3D controller: NVIDIA Corporation GF119 [GeForce GT 520MX] (rev a1)
        Subsystem: Samsung Electronics Co Ltd Device c0b6
        Flags: bus master, fast devsel, latency 0, IRQ 16
        Memory at e0000000 (32-bit, non-prefetchable) [size=16M]
        Memory at b0000000 (64-bit, prefetchable) [size=256M]
        Memory at c0000000 (64-bit, prefetchable) [size=32M]
        I/O ports at 3000 [size=200]
        Expansion ROM at e1000000 [disabled] [size=512K]
        Capabilities: <access denied>
        Kernel driver in use: nvidia
        Kernel modules: nvidia, nouveau, nvidiafb

Jak widać używany sterownik przez jądro jest nvidii, ale akceleracji 3D brak:

Kod: Zaznacz cały

daniel@Sullivan:~$ glxinfo
name of display: :0
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Error: couldn't find RGB GLX visual or fbconfig


Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
daniel@Sullivan:~$ glxgears
Xlib:  extension "GLX" missing on display ":0".
Error: couldn't get an RGB, Double-buffered visual
daniel@Sullivan:~$

Gdy zainstalowałem bumblebee wg. opisu, który tutaj podałeś przy uruchamianiu

Kod: Zaznacz cały

optirun glxspheres

... oczywiście dostałem czarny ekran z napisami, a poniższe polecenie

Kod: Zaznacz cały

lspci -v

odnośnie GeForce wyświetla to:

Kod: Zaznacz cały

01:00.0 3D controller: NVIDIA Corporation GF119 [GeForce GT 520MX] (rev ff) (prog-if ff)         !!! Unknown header type 7f

Kod: Zaznacz cały

daniel@Sullivan:~$ egrep -i 'glx|nvidia' /var/log/Xorg.0.log
[    19.200] (II) LoadModule: "glx"
[    19.223] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    20.456] (II) Module glx: vendor="NVIDIA Corporation"
[    20.456] (II) NVIDIA GLX Module  310.19  Thu Nov  8 01:12:43 PST 2012
[    20.456] Loading extension GLX
[    20.596] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)

Ile jeszcze można to znosić... Oczywiście jestem na Kubuntu 12.10

fnmirk · Post autor: **fnmirk** » 20 stycznia 2013, 01:04

Wszystkie dostępne informacje zostały przedstawione w tym temacie aby pomóc Ci rozwiązać ten problem. Moim zdaniem, (przepraszam za to stwierdzenie) robisz coś bezmyślnie.

Wszelkie operacje związane z instalacją sterowników kart graficznych powinno wykonywać się w czystym trybie tekstowym. Inaczej instalacja może przebiegać z takim skutkiem jak u Ciebie.

A dla Debiana musi działać to (powtarzam to za tym co napisał otypoks), w przypadku Kubuntu musisz postąpić podobnie korzystając z wcześniejszego opisu (odnośnik - https://wiki.ubuntu.com/Bumblebee - wybierając odpowiednia wersję):
http://suwako.nomanga.net/

Kod: Zaznacz cały

wget -O - http://suwako.nomanga.net/suwako.asc | apt-key add -

Jako root:

Kod: Zaznacz cały

nano -w /etc/apt/sources.list

Dodajesz:

Kod: Zaznacz cały

deb http://suwako.nomanga.net/debian sid main contrib
#deb-src http://suwako.nomanga.net/debian sid main

Kod: Zaznacz cały

apt-get update
apt-get install bumblebee bumblebee-nvidia
adduser $USER bumblebee
reboot

Jeśli zrobiłeś wszystko poprawnie i czy sprzęt jest obsługiwany przez sterowniki NVIDIA / Nouveau to bbswitch powinieneś być w stanie uruchomić programy z pomocą optirun.

Kod: Zaznacz cały

optirun glxgears -info

http://askubuntu.com/questions/155898/h ... 20-working

Przejrzyj ten temat od początku i uporządkuj swoje wiadomości.