Kod: Zaznacz cały
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-46) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Sun Sep 23 09:49:36 UTC 2012
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000017df7000 (usable)
[ 0.000000] BIOS-e820: 0000000017df7000 - 0000000017e16000 (ACPI data)
[ 0.000000] BIOS-e820: 0000000017e16000 - 0000000018000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] last_pfn = 0x17df7 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CBFFF write-protect
[ 0.000000] CC000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FF0000000 write-back
[ 0.000000] 1 base 010000000 mask FF8000000 write-back
[ 0.000000] 2 base 017F00000 mask FFFF00000 uncachable
[ 0.000000] 3 base 017E80000 mask FFFF80000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-0000000017df7000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0017c00000 page 2M
[ 0.000000] 0017c00000 - 0017df7000 page 4k
[ 0.000000] kernel direct mapping tables up to 17df7000 @ 7000-d000
[ 0.000000] RAMDISK: 1166a000 - 11eb9267
[ 0.000000] ACPI: RSDP 000fd6d0 00014 (v00 DELL )
[ 0.000000] ACPI: RSDT 000fd6e4 00030 (v01 DELL GX150 00000005 ASL 00000061)
[ 0.000000] ACPI: FACP 000fd718 00074 (v01 DELL GX150 00000005 ASL 00000061)
[ 0.000000] ACPI: DSDT fffe5022 0249A (v01 DELL dt_ex 00001000 MSFT 0100000D)
[ 0.000000] ACPI: FACS 17e16000 00040
[ 0.000000] ACPI: SSDT fffe75f9 000BA (v01 DELL st_ex 00001000 MSFT 0100000D)
[ 0.000000] ACPI: BOOT 000fd7e8 00028 (v01 DELL GX150 00000005 ASL 00000061)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 381MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 17df7000
[ 0.000000] low ram: 0 - 17df7000
[ 0.000000] node 0 low ram: 00000000 - 17df7000
[ 0.000000] node 0 bootmap 00002000 - 00004fc0
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0017df7000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 00014ccd0c] TEXT DATA BSS ==> [0001000000 - 00014ccd0c]
[ 0.000000] #4 [001166a000 - 0011eb9267] RAMDISK ==> [001166a000 - 0011eb9267]
[ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #6 [00014cd000 - 00014d31d0] BRK ==> [00014cd000 - 00014d31d0]
[ 0.000000] #7 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
[ 0.000000] #8 [0000002000 - 0000005000] BOOTMAP ==> [0000002000 - 0000005000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00017df7
[ 0.000000] HighMem 0x00017df7 -> 0x00017df7
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x000000a0
[ 0.000000] 0: 0x00000100 -> 0x00017df7
[ 0.000000] On node 0 totalpages: 97687
[ 0.000000] free_area_init_node: node 0, pgdat c13b48c0, node_mem_map c14d5000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3968 pages, LIFO batch:0
[ 0.000000] Normal zone: 732 pages used for memmap
[ 0.000000] Normal zone: 92955 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Found and enabled local APIC!
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 18000000 (gap: 18000000:e6c00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s34328 r0 d23016 u4194304
[ 0.000000] pcpu-alloc: s34328 r0 d23016 u4194304 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 96923
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-686 root=UUID=d6471883-14d8-4e81-bb87-21cf21108dc9 ro quiet
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 373464k/391132k available (2506k kernel code, 17036k reserved, 1326k data, 380k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0xd85f7000 - 0xff3fe000 ( 622 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd7df7000 ( 381 MB)
[ 0.000000] .init : 0xc13bf000 - 0xc141e000 ( 380 kB)
[ 0.000000] .data : 0xc1272b9b - 0xc13be4c4 (1326 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1272b9b (2506 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 930.199 MHz processor.
[ 0.008012] Calibrating delay loop (skipped), value calculated using timer frequency.. 1860.39 BogoMIPS (lpj=3720796)
[ 0.008068] Security Framework initialized
[ 0.008090] SELinux: Disabled at boot.
[ 0.008109] Mount-cache hash table entries: 512
[ 0.008459] Initializing cgroup subsys ns
[ 0.008471] Initializing cgroup subsys cpuacct
[ 0.008482] Initializing cgroup subsys devices
[ 0.008489] Initializing cgroup subsys freezer
[ 0.008496] Initializing cgroup subsys net_cls
[ 0.008562] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 0.008569] CPU: L2 cache: 256K
[ 0.008581] mce: CPU supports 5 MCE banks
[ 0.008630] Performance Events: p6 PMU driver.
[ 0.008650] ... version: 0
[ 0.008655] ... bit width: 32
[ 0.008659] ... generic registers: 2
[ 0.008664] ... value mask: 00000000ffffffff
[ 0.008670] ... max period: 000000007fffffff
[ 0.008675] ... fixed-purpose events: 0
[ 0.008680] ... event mask: 0000000000000003
[ 0.008693] Checking 'hlt' instruction... OK.
[ 0.024623] SMP alternatives: switching to UP code
[ 0.031131] Freeing SMP alternatives: 13k freed
[ 0.031162] ACPI: Core revision 20090903
[ 0.054839] ACPI: setting ELCR to 0200 (from 0e00)
[ 0.055453] Enabling APIC mode: Flat. Using 0 I/O APICs
[ 0.055462] weird, boot CPU (#0) not listed by the BIOS.
[ 0.055467] SMP motherboard not detected.
[ 0.056001] SMP disabled
[ 0.056001] Brought up 1 CPUs
[ 0.056001] Total of 1 processors activated (1860.39 BogoMIPS).
[ 0.056001] CPU0 attaching NULL sched-domain.
[ 0.056001] devtmpfs: initialized
[ 0.056001] regulator: core version 0.5
[ 0.056001] NET: Registered protocol family 16
[ 0.056001] ACPI: bus type pci registered
[ 0.080539] PCI: PCI BIOS revision 2.10 entry at 0xfbfee, last bus=1
[ 0.080545] PCI: Using configuration type 1 for base access
[ 0.081637] bio: create slab <bio-0> at 0
[ 0.082560] ACPI: EC: Look up EC in DSDT
[ 0.112874] ACPI: Interpreter enabled
[ 0.112890] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.112954] ACPI: Using PIC for interrupt routing
[ 0.137345] ACPI: No dock devices found.
[ 0.137402] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.137576] pci 0000:00:02.0: reg 10 32bit mmio pref: [0xf8000000-0xfbffffff]
[ 0.137588] pci 0000:00:02.0: reg 14 32bit mmio: [0xff080000-0xff0fffff]
[ 0.137822] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
[ 0.137897] pci 0000:00:1f.2: reg 20 io port: [0xff80-0xff9f]
[ 0.137978] pci 0000:00:1f.3: reg 20 io port: [0xdcd0-0xdcdf]
[ 0.138051] pci 0000:00:1f.4: reg 20 io port: [0xff60-0xff7f]
[ 0.138105] pci 0000:00:1f.5: reg 10 io port: [0xd800-0xd8ff]
[ 0.138117] pci 0000:00:1f.5: reg 14 io port: [0xdc40-0xdc7f]
[ 0.138223] pci 0000:01:0c.0: reg 10 io port: [0xec80-0xecff]
[ 0.138236] pci 0000:01:0c.0: reg 14 32bit mmio: [0xfdfffc00-0xfdfffc7f]
[ 0.138267] pci 0000:01:0c.0: reg 30 32bit mmio pref: [0xfe000000-0xfe01ffff]
[ 0.138300] pci 0000:01:0c.0: supports D1 D2
[ 0.138307] pci 0000:01:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.138316] pci 0000:01:0c.0: PME# disabled
[ 0.138356] pci 0000:00:1e.0: transparent bridge
[ 0.138365] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff]
[ 0.138375] pci 0000:00:1e.0: bridge 32bit mmio: [0xfd000000-0xfeffffff]
[ 0.138393] pci_bus 0000:00: on NUMA node 0
[ 0.138406] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.139138] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.158831] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[ 0.159253] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 0.159670] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[ 0.160103] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[ 0.160518] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 0.160933] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 0.161348] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 0.161770] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[ 0.162069] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.162085] vgaarb: loaded
[ 0.162316] PCI: Using ACPI for IRQ routing
[ 0.162636] Switching to clocksource tsc
[ 0.164001] pnp: PnP ACPI init
[ 0.164001] ACPI: bus type pnp registered
[ 0.188094] pnp: PnP ACPI: found 11 devices
[ 0.188102] ACPI: ACPI bus type pnp unregistered
[ 0.188114] PnPBIOS: Disabled by ACPI PNP
[ 0.188143] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.188153] system 00:00: iomem range 0x100000-0xffffff could not be reserved
[ 0.188162] system 00:00: iomem range 0x1000000-0x17df6fff could not be reserved
[ 0.188171] system 00:00: iomem range 0xf0000-0xfffff could not be reserved
[ 0.188180] system 00:00: iomem range 0xffb00000-0xffbfffff has been reserved
[ 0.188188] system 00:00: iomem range 0xffc00000-0xffffffff has been reserved
[ 0.188211] system 00:0a: ioport range 0x800-0x85f has been reserved
[ 0.188220] system 00:0a: ioport range 0xc00-0xc7f has been reserved
[ 0.188228] system 00:0a: ioport range 0x860-0x8ff has been reserved
[ 0.223374] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
[ 0.223384] pci 0000:00:1e.0: IO window: 0xe000-0xefff
[ 0.223397] pci 0000:00:1e.0: MEM window: 0xfd000000-0xfeffffff
[ 0.223406] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.223434] pci 0000:00:1e.0: setting latency timer to 64
[ 0.223447] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.223454] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.223462] pci_bus 0000:01: resource 0 io: [0xe000-0xefff]
[ 0.223470] pci_bus 0000:01: resource 1 mem: [0xfd000000-0xfeffffff]
[ 0.223477] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.223484] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
[ 0.223589] NET: Registered protocol family 2
[ 0.223854] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.224708] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.225108] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.225643] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.225656] TCP reno registered
[ 0.226012] NET: Registered protocol family 1
[ 0.226082] pci 0000:00:02.0: Boot video device
[ 0.226882] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 0.226891] PCI: setting IRQ 11 as level-triggered
[ 0.226902] pci 0000:00:1f.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 0.226932] pci 0000:00:1f.2: PCI INT D disabled
[ 0.227516] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[ 0.227526] pci 0000:00:1f.4: PCI INT C -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11
[ 0.227548] pci 0000:00:1f.4: PCI INT C disabled
[ 0.227725] Unpacking initramfs...
[ 0.890951] Freeing initrd memory: 8508k freed
[ 0.931909] Simple Boot Flag at 0x7d set to 0x1
[ 0.932581] audit: initializing netlink socket (disabled)
[ 0.932629] type=2000 audit(1356807981.929:1): initialized
[ 0.944419] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.948732] VFS: Disk quotas dquot_6.5.2
[ 0.948933] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.949150] msgmni has been set to 746
[ 0.949785] alg: No test for stdrng (krng)
[ 0.949882] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.949891] io scheduler noop registered
[ 0.949896] io scheduler anticipatory registered
[ 0.949901] io scheduler deadline registered
[ 0.950028] io scheduler cfq registered (default)
[ 0.950447] isapnp: Scanning for PnP cards...
[ 1.304180] isapnp: No Plug & Play device found
[ 1.308148] Linux agpgart interface v0.103
[ 1.308323] agpgart-intel 0000:00:00.0: Intel i815 Chipset
[ 1.314758] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
[ 1.314930] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.315070] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.315214] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.315795] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.316052] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.316434] PNP: No PS/2 controller found. Probing ports directly.
[ 1.568255] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.568479] mice: PS/2 mouse device common for all mice
[ 1.568605] rtc_cmos 00:05: RTC can wake from S4
[ 1.568717] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.568748] rtc0: alarms up to one day, 242 bytes nvram
[ 1.568778] cpuidle: using governor ladder
[ 1.568784] cpuidle: using governor menu
[ 1.568797] No iBFT detected.
[ 1.569944] TCP cubic registered
[ 1.570362] NET: Registered protocol family 10
[ 1.572656] Mobile IPv6
[ 1.572665] NET: Registered protocol family 17
[ 1.572705] Using IPI No-Shortcut mode
[ 1.572925] PM: Resume from disk failed.
[ 1.572955] registered taskstats version 1
[ 1.573265] rtc_cmos 00:05: setting system clock to 2012-12-29 19:06:23 UTC (1356807983)
[ 1.573391] Initalizing network drop monitor service
[ 1.573475] Freeing unused kernel memory: 380k freed
[ 1.574968] Write protecting the kernel text: 2508k
[ 1.575024] Write protecting the kernel read-only data: 920k
[ 1.636411] udev[46]: starting version 164
[ 2.071255] SCSI subsystem initialized
[ 2.116752] usbcore: registered new interface driver usbfs
[ 2.117239] usbcore: registered new interface driver hub
[ 2.117789] usbcore: registered new device driver usb
[ 2.137930] Floppy drive(s): fd1 is 360K PC
[ 2.144428] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.222557] FDC 0 is a National Semiconductor PC87306
[ 2.222796] libata version 3.00 loaded.
[ 2.234787] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 2.234801] 3c59x 0000:01:0c.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 2.234832] 3c59x: Donald Becker and others.
[ 2.234850] 0000:01:0c.0: 3Com PCI 3c905C Tornado at d8852c00.
[ 2.267734] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.267914] uhci_hcd 0000:00:1f.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 2.267938] uhci_hcd 0000:00:1f.2: setting latency timer to 64
[ 2.267946] uhci_hcd 0000:00:1f.2: UHCI Host Controller
[ 2.268067] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
[ 2.268120] uhci_hcd 0000:00:1f.2: irq 11, io base 0x0000ff80
[ 2.268257] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.268266] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.268273] usb usb1: Product: UHCI Host Controller
[ 2.268279] usb usb1: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 2.268285] usb usb1: SerialNumber: 0000:00:1f.2
[ 2.268817] usb usb1: configuration #1 chosen from 1 choice
[ 2.268999] hub 1-0:1.0: USB hub found
[ 2.269031] hub 1-0:1.0: 2 ports detected
[ 2.269204] uhci_hcd 0000:00:1f.4: PCI INT C -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11
[ 2.269227] uhci_hcd 0000:00:1f.4: setting latency timer to 64
[ 2.269235] uhci_hcd 0000:00:1f.4: UHCI Host Controller
[ 2.269259] uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
[ 2.269300] uhci_hcd 0000:00:1f.4: irq 11, io base 0x0000ff60
[ 2.269411] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.269419] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.269426] usb usb2: Product: UHCI Host Controller
[ 2.269432] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 2.269438] usb usb2: SerialNumber: 0000:00:1f.4
[ 2.269824] usb usb2: configuration #1 chosen from 1 choice
[ 2.270001] hub 2-0:1.0: USB hub found
[ 2.270031] hub 2-0:1.0: 2 ports detected
[ 2.296508] ata_piix 0000:00:1f.1: version 2.13
[ 2.296659] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 2.299398] scsi0 : ata_piix
[ 2.300119] scsi1 : ata_piix
[ 2.300399] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 2.300408] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 2.307574] ata2: port disabled. ignoring.
[ 2.464445] ata1.00: HPA detected: current 156365903, native 156368016
[ 2.464461] ata1.00: ATA-7: SAMSUNG SP0802N, TK100-24, max UDMA/100
[ 2.464469] ata1.00: 156365903 sectors, multi 8: LBA48
[ 2.472353] ata1.00: configured for UDMA/100
[ 2.472695] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SP0802N TK10 PQ: 0 ANSI: 5
[ 2.510048] sd 0:0:0:0: [sda] 156365903 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 2.510223] sd 0:0:0:0: [sda] Write Protect is off
[ 2.510232] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.510306] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.510744] sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
[ 2.566622] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.580134] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 2.773609] usb 2-1: New USB device found, idVendor=041e, idProduct=4064
[ 2.773621] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.773629] usb 2-1: Product: VF0420 Live! Cam Vista IM
[ 2.773635] usb 2-1: Manufacturer: Creative Labs
[ 2.773891] usb 2-1: configuration #1 chosen from 1 choice
[ 3.108613] PM: Starting manual resume from disk
[ 3.108629] PM: Resume from partition 8:6
[ 3.108634] PM: Checking hibernation image.
[ 3.134676] PM: Error -22 checking image file
[ 3.134682] PM: Resume from disk failed.
[ 3.227959] kjournald starting. Commit interval 5 seconds
[ 3.227992] EXT3-fs: mounted filesystem with ordered data mode.
[ 4.862068] udev[219]: starting version 164
[ 5.397124] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 5.397158] ACPI: Power Button [VBTN]
[ 5.397366] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 5.397377] ACPI: Power Button [PWRF]
[ 5.790323] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 5.792240] processor LNXCPU:00: registered as cooling_device0
[ 5.828993] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 5.866011] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 5.905575] parport_pc 00:09: reported by Plug and Play ACPI
[ 5.905684] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 5.930950] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[ 5.930961] PCI: setting IRQ 10 as level-triggered
[ 5.930971] i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
[ 5.930991] i801_smbus 0000:00:1f.3: Enabling SMBus device
[ 5.940136] Intel 82802 RNG detected
[ 6.147623] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.166912] Linux video capture interface: v2.00
[ 6.200936] udev[231]: renamed network interface eth0 to eth1
[ 6.208741] gspca: main v2.7.0 registered
[ 6.489941] gspca: probing 041e:4064
[ 6.676223] ov519: I2C synced in 0 attempt(s)
[ 6.676234] ov519: starting OV7xx0 configuration
[ 6.688234] ov519: Sensor is an OV7670
[ 7.391254] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
[ 7.391295] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 7.956242] intel8x0: white list rate for 1028:00be is 44100
[ 8.237384] gspca: probe ok
[ 8.237426] gspca: probing 041e:4064
[ 8.237454] gspca: probing 041e:4064
[ 8.237501] usbcore: registered new interface driver ov519
[ 8.237510] ov519: registered
[ 8.369961] usbcore: registered new interface driver snd-usb-audio
[ 8.970664] Adding 498680k swap on /dev/sda6. Priority:-1 extents:1 across:498680k
[ 9.461941] EXT3 FS on sda2, internal journal
[ 9.803134] loop: module loaded
[ 11.394759] kjournald starting. Commit interval 5 seconds
[ 11.394944] EXT3 FS on sda1, internal journal
[ 11.394957] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.503821] kjournald starting. Commit interval 5 seconds
[ 11.504105] EXT3 FS on sda5, internal journal
[ 11.504120] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.589334] kjournald starting. Commit interval 5 seconds
[ 11.589541] EXT3 FS on sda7, internal journal
[ 11.589552] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.891679] fuse init (API version 7.13)
[ 16.545943] eth1: setting full-duplex.
[ 19.798064] [drm] Initialized drm 1.1.0 20060810
[ 22.052290] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
[ 22.052299] PCI: setting IRQ 9 as level-triggered
[ 22.052309] pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
[ 22.052321] pci 0000:00:02.0: setting latency timer to 64
[ 22.054091] [drm] Initialized i810 1.4.0 20030605 for 0000:00:02.0 on minor 0
[ 22.055094] mtrr: base(0xf8000000) is not aligned on a size(0x12c000) boundary
[ 22.181918] [drm] Using v1.4 init.
[ 22.187427] mtrr: base(0xf8000000) is not aligned on a size(0x3000000) boundary
[ 25.356017] [drm:drm_reclaim_locked_buffers] *ERROR* reclaim_buffers_locked() deadlock. Please rework this
[ 25.356025] driver to use reclaim_buffers_idlelocked() instead.
[ 25.356029] I will go on reclaiming the buffers anyway.
[ 27.376034] eth1: no IPv6 routers present
[ 30.867063] Bluetooth: Core ver 2.15
[ 30.867236] NET: Registered protocol family 31
[ 30.867241] Bluetooth: HCI device and connection manager initialized
[ 30.867249] Bluetooth: HCI socket layer initialized
[ 31.175244] Bluetooth: L2CAP ver 2.14
[ 31.175254] Bluetooth: L2CAP socket layer initialized
[ 31.557057] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 31.557067] Bluetooth: BNEP filters: protocol multicast
[ 31.693695] Bridge firewalling registered
[ 32.108729] Bluetooth: SCO (Voice Link) ver 0.6
[ 32.108739] Bluetooth: SCO socket layer initialized
[ 33.394224] lp0: using parport0 (interrupt-driven).
[ 33.567559] ppdev: user-space parallel port driver
[ 43.092044] hrtimer: interrupt took 32094 ns
[ 5895.128073] usb 2-1: USB disconnect, address 2
[ 5895.128334] gspca: disconnect complete
[ 6272.548353] usbcore: deregistering interface driver snd-usb-audio
[ 6273.538805] usbcore: registered new interface driver snd-usb-audio
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-46) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Sun Sep 23 09:49:36 UTC 2012
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000017df7000 (usable)
[ 0.000000] BIOS-e820: 0000000017df7000 - 0000000017e16000 (ACPI data)
[ 0.000000] BIOS-e820: 0000000017e16000 - 0000000018000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] last_pfn = 0x17df7 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CBFFF write-protect
[ 0.000000] CC000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FF0000000 write-back
[ 0.000000] 1 base 010000000 mask FF8000000 write-back
[ 0.000000] 2 base 017F00000 mask FFFF00000 uncachable
[ 0.000000] 3 base 017E80000 mask FFFF80000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-0000000017df7000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0017c00000 page 2M
[ 0.000000] 0017c00000 - 0017df7000 page 4k
[ 0.000000] kernel direct mapping tables up to 17df7000 @ 7000-d000
[ 0.000000] RAMDISK: 1166a000 - 11eb9267
[ 0.000000] ACPI: RSDP 000fd6d0 00014 (v00 DELL )
[ 0.000000] ACPI: RSDT 000fd6e4 00030 (v01 DELL GX150 00000005 ASL 00000061)
[ 0.000000] ACPI: FACP 000fd718 00074 (v01 DELL GX150 00000005 ASL 00000061)
[ 0.000000] ACPI: DSDT fffe5022 0249A (v01 DELL dt_ex 00001000 MSFT 0100000D)
[ 0.000000] ACPI: FACS 17e16000 00040
[ 0.000000] ACPI: SSDT fffe75f9 000BA (v01 DELL st_ex 00001000 MSFT 0100000D)
[ 0.000000] ACPI: BOOT 000fd7e8 00028 (v01 DELL GX150 00000005 ASL 00000061)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 381MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 17df7000
[ 0.000000] low ram: 0 - 17df7000
[ 0.000000] node 0 low ram: 00000000 - 17df7000
[ 0.000000] node 0 bootmap 00002000 - 00004fc0
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0017df7000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 00014ccd0c] TEXT DATA BSS ==> [0001000000 - 00014ccd0c]
[ 0.000000] #4 [001166a000 - 0011eb9267] RAMDISK ==> [001166a000 - 0011eb9267]
[ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #6 [00014cd000 - 00014d31d0] BRK ==> [00014cd000 - 00014d31d0]
[ 0.000000] #7 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
[ 0.000000] #8 [0000002000 - 0000005000] BOOTMAP ==> [0000002000 - 0000005000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00017df7
[ 0.000000] HighMem 0x00017df7 -> 0x00017df7
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x000000a0
[ 0.000000] 0: 0x00000100 -> 0x00017df7
[ 0.000000] On node 0 totalpages: 97687
[ 0.000000] free_area_init_node: node 0, pgdat c13b48c0, node_mem_map c14d5000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3968 pages, LIFO batch:0
[ 0.000000] Normal zone: 732 pages used for memmap
[ 0.000000] Normal zone: 92955 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Found and enabled local APIC!
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 18000000 (gap: 18000000:e6c00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s34328 r0 d23016 u4194304
[ 0.000000] pcpu-alloc: s34328 r0 d23016 u4194304 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 96923
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-686 root=UUID=d6471883-14d8-4e81-bb87-21cf21108dc9 ro quiet
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 373464k/391132k available (2506k kernel code, 17036k reserved, 1326k data, 380k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0xd85f7000 - 0xff3fe000 ( 622 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd7df7000 ( 381 MB)
[ 0.000000] .init : 0xc13bf000 - 0xc141e000 ( 380 kB)
[ 0.000000] .data : 0xc1272b9b - 0xc13be4c4 (1326 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1272b9b (2506 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 930.199 MHz processor.
[ 0.008012] Calibrating delay loop (skipped), value calculated using timer frequency.. 1860.39 BogoMIPS (lpj=3720796)
[ 0.008068] Security Framework initialized
[ 0.008090] SELinux: Disabled at boot.
[ 0.008109] Mount-cache hash table entries: 512
[ 0.008459] Initializing cgroup subsys ns
[ 0.008471] Initializing cgroup subsys cpuacct
[ 0.008482] Initializing cgroup subsys devices
[ 0.008489] Initializing cgroup subsys freezer
[ 0.008496] Initializing cgroup subsys net_cls
[ 0.008562] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 0.008569] CPU: L2 cache: 256K
[ 0.008581] mce: CPU supports 5 MCE banks
[ 0.008630] Performance Events: p6 PMU driver.
[ 0.008650] ... version: 0
[ 0.008655] ... bit width: 32
[ 0.008659] ... generic registers: 2
[ 0.008664] ... value mask: 00000000ffffffff
[ 0.008670] ... max period: 000000007fffffff
[ 0.008675] ... fixed-purpose events: 0
[ 0.008680] ... event mask: 0000000000000003
[ 0.008693] Checking 'hlt' instruction... OK.
[ 0.024623] SMP alternatives: switching to UP code
[ 0.031131] Freeing SMP alternatives: 13k freed
[ 0.031162] ACPI: Core revision 20090903
[ 0.054839] ACPI: setting ELCR to 0200 (from 0e00)
[ 0.055453] Enabling APIC mode: Flat. Using 0 I/O APICs
[ 0.055462] weird, boot CPU (#0) not listed by the BIOS.
[ 0.055467] SMP motherboard not detected.
[ 0.056001] SMP disabled
[ 0.056001] Brought up 1 CPUs
[ 0.056001] Total of 1 processors activated (1860.39 BogoMIPS).
[ 0.056001] CPU0 attaching NULL sched-domain.
[ 0.056001] devtmpfs: initialized
[ 0.056001] regulator: core version 0.5
[ 0.056001] NET: Registered protocol family 16
[ 0.056001] ACPI: bus type pci registered
[ 0.080539] PCI: PCI BIOS revision 2.10 entry at 0xfbfee, last bus=1
[ 0.080545] PCI: Using configuration type 1 for base access
[ 0.081637] bio: create slab <bio-0> at 0
[ 0.082560] ACPI: EC: Look up EC in DSDT
[ 0.112874] ACPI: Interpreter enabled
[ 0.112890] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.112954] ACPI: Using PIC for interrupt routing
[ 0.137345] ACPI: No dock devices found.
[ 0.137402] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.137576] pci 0000:00:02.0: reg 10 32bit mmio pref: [0xf8000000-0xfbffffff]
[ 0.137588] pci 0000:00:02.0: reg 14 32bit mmio: [0xff080000-0xff0fffff]
[ 0.137822] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
[ 0.137897] pci 0000:00:1f.2: reg 20 io port: [0xff80-0xff9f]
[ 0.137978] pci 0000:00:1f.3: reg 20 io port: [0xdcd0-0xdcdf]
[ 0.138051] pci 0000:00:1f.4: reg 20 io port: [0xff60-0xff7f]
[ 0.138105] pci 0000:00:1f.5: reg 10 io port: [0xd800-0xd8ff]
[ 0.138117] pci 0000:00:1f.5: reg 14 io port: [0xdc40-0xdc7f]
[ 0.138223] pci 0000:01:0c.0: reg 10 io port: [0xec80-0xecff]
[ 0.138236] pci 0000:01:0c.0: reg 14 32bit mmio: [0xfdfffc00-0xfdfffc7f]
[ 0.138267] pci 0000:01:0c.0: reg 30 32bit mmio pref: [0xfe000000-0xfe01ffff]
[ 0.138300] pci 0000:01:0c.0: supports D1 D2
[ 0.138307] pci 0000:01:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.138316] pci 0000:01:0c.0: PME# disabled
[ 0.138356] pci 0000:00:1e.0: transparent bridge
[ 0.138365] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff]
[ 0.138375] pci 0000:00:1e.0: bridge 32bit mmio: [0xfd000000-0xfeffffff]
[ 0.138393] pci_bus 0000:00: on NUMA node 0
[ 0.138406] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.139138] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.158831] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[ 0.159253] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 0.159670] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[ 0.160103] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[ 0.160518] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 0.160933] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 0.161348] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 0.161770] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[ 0.162069] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.162085] vgaarb: loaded
[ 0.162316] PCI: Using ACPI for IRQ routing
[ 0.162636] Switching to clocksource tsc
[ 0.164001] pnp: PnP ACPI init
[ 0.164001] ACPI: bus type pnp registered
[ 0.188094] pnp: PnP ACPI: found 11 devices
[ 0.188102] ACPI: ACPI bus type pnp unregistered
[ 0.188114] PnPBIOS: Disabled by ACPI PNP
[ 0.188143] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.188153] system 00:00: iomem range 0x100000-0xffffff could not be reserved
[ 0.188162] system 00:00: iomem range 0x1000000-0x17df6fff could not be reserved
[ 0.188171] system 00:00: iomem range 0xf0000-0xfffff could not be reserved
[ 0.188180] system 00:00: iomem range 0xffb00000-0xffbfffff has been reserved
[ 0.188188] system 00:00: iomem range 0xffc00000-0xffffffff has been reserved
[ 0.188211] system 00:0a: ioport range 0x800-0x85f has been reserved
[ 0.188220] system 00:0a: ioport range 0xc00-0xc7f has been reserved
[ 0.188228] system 00:0a: ioport range 0x860-0x8ff has been reserved
[ 0.223374] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
[ 0.223384] pci 0000:00:1e.0: IO window: 0xe000-0xefff
[ 0.223397] pci 0000:00:1e.0: MEM window: 0xfd000000-0xfeffffff
[ 0.223406] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.223434] pci 0000:00:1e.0: setting latency timer to 64
[ 0.223447] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.223454] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.223462] pci_bus 0000:01: resource 0 io: [0xe000-0xefff]
[ 0.223470] pci_bus 0000:01: resource 1 mem: [0xfd000000-0xfeffffff]
[ 0.223477] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.223484] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
[ 0.223589] NET: Registered protocol family 2
[ 0.223854] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.224708] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.225108] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.225643] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.225656] TCP reno registered
[ 0.226012] NET: Registered protocol family 1
[ 0.226082] pci 0000:00:02.0: Boot video device
[ 0.226882] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 0.226891] PCI: setting IRQ 11 as level-triggered
[ 0.226902] pci 0000:00:1f.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 0.226932] pci 0000:00:1f.2: PCI INT D disabled
[ 0.227516] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[ 0.227526] pci 0000:00:1f.4: PCI INT C -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11
[ 0.227548] pci 0000:00:1f.4: PCI INT C disabled
[ 0.227725] Unpacking initramfs...
[ 0.890951] Freeing initrd memory: 8508k freed
[ 0.931909] Simple Boot Flag at 0x7d set to 0x1
[ 0.932581] audit: initializing netlink socket (disabled)
[ 0.932629] type=2000 audit(1356807981.929:1): initialized
[ 0.944419] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.948732] VFS: Disk quotas dquot_6.5.2
[ 0.948933] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.949150] msgmni has been set to 746
[ 0.949785] alg: No test for stdrng (krng)
[ 0.949882] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.949891] io scheduler noop registered
[ 0.949896] io scheduler anticipatory registered
[ 0.949901] io scheduler deadline registered
[ 0.950028] io scheduler cfq registered (default)
[ 0.950447] isapnp: Scanning for PnP cards...
[ 1.304180] isapnp: No Plug & Play device found
[ 1.308148] Linux agpgart interface v0.103
[ 1.308323] agpgart-intel 0000:00:00.0: Intel i815 Chipset
[ 1.314758] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
[ 1.314930] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.315070] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.315214] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.315795] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.316052] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.316434] PNP: No PS/2 controller found. Probing ports directly.
[ 1.568255] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.568479] mice: PS/2 mouse device common for all mice
[ 1.568605] rtc_cmos 00:05: RTC can wake from S4
[ 1.568717] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.568748] rtc0: alarms up to one day, 242 bytes nvram
[ 1.568778] cpuidle: using governor ladder
[ 1.568784] cpuidle: using governor menu
[ 1.568797] No iBFT detected.
[ 1.569944] TCP cubic registered
[ 1.570362] NET: Registered protocol family 10
[ 1.572656] Mobile IPv6
[ 1.572665] NET: Registered protocol family 17
[ 1.572705] Using IPI No-Shortcut mode
[ 1.572925] PM: Resume from disk failed.
[ 1.572955] registered taskstats version 1
[ 1.573265] rtc_cmos 00:05: setting system clock to 2012-12-29 19:06:23 UTC (1356807983)
[ 1.573391] Initalizing network drop monitor service
[ 1.573475] Freeing unused kernel memory: 380k freed
[ 1.574968] Write protecting the kernel text: 2508k
[ 1.575024] Write protecting the kernel read-only data: 920k
[ 1.636411] udev[46]: starting version 164
[ 2.071255] SCSI subsystem initialized
[ 2.116752] usbcore: registered new interface driver usbfs
[ 2.117239] usbcore: registered new interface driver hub
[ 2.117789] usbcore: registered new device driver usb
[ 2.137930] Floppy drive(s): fd1 is 360K PC
[ 2.144428] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.222557] FDC 0 is a National Semiconductor PC87306
[ 2.222796] libata version 3.00 loaded.
[ 2.234787] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 2.234801] 3c59x 0000:01:0c.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 2.234832] 3c59x: Donald Becker and others.
[ 2.234850] 0000:01:0c.0: 3Com PCI 3c905C Tornado at d8852c00.
[ 2.267734] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.267914] uhci_hcd 0000:00:1f.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 2.267938] uhci_hcd 0000:00:1f.2: setting latency timer to 64
[ 2.267946] uhci_hcd 0000:00:1f.2: UHCI Host Controller
[ 2.268067] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
[ 2.268120] uhci_hcd 0000:00:1f.2: irq 11, io base 0x0000ff80
[ 2.268257] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.268266] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.268273] usb usb1: Product: UHCI Host Controller
[ 2.268279] usb usb1: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 2.268285] usb usb1: SerialNumber: 0000:00:1f.2
[ 2.268817] usb usb1: configuration #1 chosen from 1 choice
[ 2.268999] hub 1-0:1.0: USB hub found
[ 2.269031] hub 1-0:1.0: 2 ports detected
[ 2.269204] uhci_hcd 0000:00:1f.4: PCI INT C -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11
[ 2.269227] uhci_hcd 0000:00:1f.4: setting latency timer to 64
[ 2.269235] uhci_hcd 0000:00:1f.4: UHCI Host Controller
[ 2.269259] uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
[ 2.269300] uhci_hcd 0000:00:1f.4: irq 11, io base 0x0000ff60
[ 2.269411] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.269419] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.269426] usb usb2: Product: UHCI Host Controller
[ 2.269432] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 2.269438] usb usb2: SerialNumber: 0000:00:1f.4
[ 2.269824] usb usb2: configuration #1 chosen from 1 choice
[ 2.270001] hub 2-0:1.0: USB hub found
[ 2.270031] hub 2-0:1.0: 2 ports detected
[ 2.296508] ata_piix 0000:00:1f.1: version 2.13
[ 2.296659] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 2.299398] scsi0 : ata_piix
[ 2.300119] scsi1 : ata_piix
[ 2.300399] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 2.300408] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 2.307574] ata2: port disabled. ignoring.
[ 2.464445] ata1.00: HPA detected: current 156365903, native 156368016
[ 2.464461] ata1.00: ATA-7: SAMSUNG SP0802N, TK100-24, max UDMA/100
[ 2.464469] ata1.00: 156365903 sectors, multi 8: LBA48
[ 2.472353] ata1.00: configured for UDMA/100
[ 2.472695] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SP0802N TK10 PQ: 0 ANSI: 5
[ 2.510048] sd 0:0:0:0: [sda] 156365903 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 2.510223] sd 0:0:0:0: [sda] Write Protect is off
[ 2.510232] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.510306] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.510744] sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
[ 2.566622] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.580134] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 2.773609] usb 2-1: New USB device found, idVendor=041e, idProduct=4064
[ 2.773621] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.773629] usb 2-1: Product: VF0420 Live! Cam Vista IM
[ 2.773635] usb 2-1: Manufacturer: Creative Labs
[ 2.773891] usb 2-1: configuration #1 chosen from 1 choice
[ 3.108613] PM: Starting manual resume from disk
[ 3.108629] PM: Resume from partition 8:6
[ 3.108634] PM: Checking hibernation image.
[ 3.134676] PM: Error -22 checking image file
[ 3.134682] PM: Resume from disk failed.
[ 3.227959] kjournald starting. Commit interval 5 seconds
[ 3.227992] EXT3-fs: mounted filesystem with ordered data mode.
[ 4.862068] udev[219]: starting version 164
[ 5.397124] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 5.397158] ACPI: Power Button [VBTN]
[ 5.397366] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 5.397377] ACPI: Power Button [PWRF]
[ 5.790323] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 5.792240] processor LNXCPU:00: registered as cooling_device0
[ 5.828993] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 5.866011] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 5.905575] parport_pc 00:09: reported by Plug and Play ACPI
[ 5.905684] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 5.930950] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[ 5.930961] PCI: setting IRQ 10 as level-triggered
[ 5.930971] i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
[ 5.930991] i801_smbus 0000:00:1f.3: Enabling SMBus device
[ 5.940136] Intel 82802 RNG detected
[ 6.147623] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.166912] Linux video capture interface: v2.00
[ 6.200936] udev[231]: renamed network interface eth0 to eth1
[ 6.208741] gspca: main v2.7.0 registered
[ 6.489941] gspca: probing 041e:4064
[ 6.676223] ov519: I2C synced in 0 attempt(s)
[ 6.676234] ov519: starting OV7xx0 configuration
[ 6.688234] ov519: Sensor is an OV7670
[ 7.391254] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
[ 7.391295] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 7.956242] intel8x0: white list rate for 1028:00be is 44100
[ 8.237384] gspca: probe ok
[ 8.237426] gspca: probing 041e:4064
[ 8.237454] gspca: probing 041e:4064
[ 8.237501] usbcore: registered new interface driver ov519
[ 8.237510] ov519: registered
[ 8.369961] usbcore: registered new interface driver snd-usb-audio
[ 8.970664] Adding 498680k swap on /dev/sda6. Priority:-1 extents:1 across:498680k
[ 9.461941] EXT3 FS on sda2, internal journal
[ 9.803134] loop: module loaded
[ 11.394759] kjournald starting. Commit interval 5 seconds
[ 11.394944] EXT3 FS on sda1, internal journal
[ 11.394957] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.503821] kjournald starting. Commit interval 5 seconds
[ 11.504105] EXT3 FS on sda5, internal journal
[ 11.504120] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.589334] kjournald starting. Commit interval 5 seconds
[ 11.589541] EXT3 FS on sda7, internal journal
[ 11.589552] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.891679] fuse init (API version 7.13)
[ 16.545943] eth1: setting full-duplex.
[ 19.798064] [drm] Initialized drm 1.1.0 20060810
[ 22.052290] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
[ 22.052299] PCI: setting IRQ 9 as level-triggered
[ 22.052309] pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
[ 22.052321] pci 0000:00:02.0: setting latency timer to 64
[ 22.054091] [drm] Initialized i810 1.4.0 20030605 for 0000:00:02.0 on minor 0
[ 22.055094] mtrr: base(0xf8000000) is not aligned on a size(0x12c000) boundary
[ 22.181918] [drm] Using v1.4 init.
[ 22.187427] mtrr: base(0xf8000000) is not aligned on a size(0x3000000) boundary
[ 25.356017] [drm:drm_reclaim_locked_buffers] *ERROR* reclaim_buffers_locked() deadlock. Please rework this
[ 25.356025] driver to use reclaim_buffers_idlelocked() instead.
[ 25.356029] I will go on reclaiming the buffers anyway.
[ 27.376034] eth1: no IPv6 routers present
[ 30.867063] Bluetooth: Core ver 2.15
[ 30.867236] NET: Registered protocol family 31
[ 30.867241] Bluetooth: HCI device and connection manager initialized
[ 30.867249] Bluetooth: HCI socket layer initialized
[ 31.175244] Bluetooth: L2CAP ver 2.14
[ 31.175254] Bluetooth: L2CAP socket layer initialized
[ 31.557057] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 31.557067] Bluetooth: BNEP filters: protocol multicast
[ 31.693695] Bridge firewalling registered
[ 32.108729] Bluetooth: SCO (Voice Link) ver 0.6
[ 32.108739] Bluetooth: SCO socket layer initialized
[ 33.394224] lp0: using parport0 (interrupt-driven).
[ 33.567559] ppdev: user-space parallel port driver
[ 43.092044] hrtimer: interrupt took 32094 ns
[ 5895.128073] usb 2-1: USB disconnect, address 2
[ 5895.128334] gspca: disconnect complete
[ 6272.548353] usbcore: deregistering interface driver snd-usb-audio
[ 6273.538805] usbcore: registered new interface driver snd-usb-audio
Plik Się utworzył ale nie dostałem odnośnika w terminalu. Zapisałem więc na dysku i umieściłem na serwerze:
Kod: Zaznacz cały
!!################################
!!ALSA Information Script v 0.4.61
!!################################
!!Script ran on: Sun Dec 30 19:11:06 UTC 2012
!!Linux Distribution
!!------------------
Debian GNU/Linux 6.0 \n \l
!!DMI Information
!!---------------
Manufacturer: Dell Computer Corporation
Product Name: OptiPlex GX150
Product Version:
Firmware Version: A10
!!Kernel Information
!!------------------
Kernel release: 2.6.32-5-686
Operating System: GNU/Linux
Architecture: i686
Processor: unknown
SMP Enabled: Yes
!!ALSA Version
!!------------
Driver version: 1.0.21
Library version: 1.0.23
Utilities version: 1.0.23
!!Loaded ALSA modules
!!-------------------
snd_intel8x0
!!Sound Servers on this system
!!----------------------------
No sound servers found.
!!Soundcards recognised by ALSA
!!-----------------------------
0 [I82801BAICH2 ]: ICH - Intel 82801BA-ICH2
Intel 82801BA-ICH2 with AD1885 at irq 10
!!PCI Soundcards installed in the system
!!--------------------------------------
00:1f.5 Multimedia audio controller: Intel Corporation 82801BA/BAM AC'97 Audio Controller (rev 02)
!!Advanced information - PCI Vendor/Device/Subsystem ID's
!!-------------------------------------------------------
00:1f.5 0401: 8086:2445 (rev 02)
Subsystem: 1028:00be
!!Modprobe options (Sound related)
!!--------------------------------
snd-atiixp-modem: index=-2
snd-intel8x0m: index=-2
snd-via82xx-modem: index=-2
snd-pcsp: index=-2
snd-usb-audio: index=-2
!!Loaded sound module options
!!---------------------------
!!Module: snd_intel8x0
ac97_clock : 0
ac97_quirk : <NULL>
buggy_irq : N
buggy_semaphore : N
enable : N
id : <NULL>
index : -1
joystick : 0
spdif_aclink : 0
xbox : N
!!AC97 Codec information
!!----------------------
--startcollapse--
0-0/0: Analog Devices AD1885
PCI Subsys Vendor: 0x1028
PCI Subsys Device: 0x00be
Flags: 0
Capabilities : -headphone out-
DAC resolution : 16-bit
ADC resolution : 16-bit
3D enhancement : Analog Devices Phat Stereo
Current setup
Mic gain : +20dB [+20dB]
POP path : pre 3D
Sim. stereo : off
3D enhancement : on
Loudness : off
Mono output : MIX
Mic select : Mic1
ADC/DAC loopback : off
Extended ID : codec=0 rev=0 DSA=0 VRA
Extended status : VRA
PCM front DAC : 44100Hz
PCM ADC : 48000Hz
AD18XX configuration
Unchained : 0x1000,0x0000,0x0000
Chained : 0x0000,0x0000,0x0000
0:00 = 0410
0:02 = 0102
0:04 = 0000
0:06 = 0000
0:08 = 0000
0:0a = 0000
0:0c = 8000
0:0e = 0040
0:10 = 0000
0:12 = 0000
0:14 = 0000
0:16 = 8000
0:18 = 0000
0:1a = 0202
0:1c = 8808
0:1e = 0000
0:20 = 2000
0:22 = 000f
0:24 = 0000
0:26 = 000f
0:28 = 0001
0:2a = 0001
0:2c = ac44
0:2e = 0000
0:30 = 0000
0:32 = bb80
0:34 = 0000
0:36 = 0000
0:38 = 0000
0:3a = 0000
0:3c = 0000
0:3e = 0000
0:40 = 0000
0:42 = 0000
0:44 = 0000
0:46 = 0000
0:48 = 0000
0:4a = 0000
0:4c = 0000
0:4e = 0000
0:50 = 0000
0:52 = 0000
0:54 = 0000
0:56 = 0000
0:58 = 0000
0:5a = 0000
0:5c = 0000
0:5e = 0000
0:60 = 0000
0:62 = 0000
0:64 = 0000
0:66 = 0000
0:68 = 0000
0:6a = 0000
0:6c = 0000
0:6e = 0000
0:70 = 2000
0:72 = 0000
0:74 = 1000
0:76 = cc04
0:78 = bb80
0:7a = ac44
0:7c = 4144
0:7e = 5360
--endcollapse--
!!ALSA Device nodes
!!-----------------
crw-rw----+ 1 root audio 116, 7 Dec 29 20:06 /dev/snd/controlC0
crw-rw----+ 1 root audio 116, 6 Dec 29 20:06 /dev/snd/pcmC0D0c
crw-rw----+ 1 root audio 116, 5 Dec 30 19:20 /dev/snd/pcmC0D0p
crw-rw----+ 1 root audio 116, 4 Dec 29 20:06 /dev/snd/pcmC0D1c
crw-rw----+ 1 root audio 116, 3 Dec 29 21:50 /dev/snd/seq
crw-rw----+ 1 root audio 116, 2 Dec 29 20:06 /dev/snd/timer
/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root 60 Dec 29 21:44 .
drwxr-xr-x 3 root root 180 Dec 29 21:50 ..
lrwxrwxrwx 1 root root 12 Dec 29 20:06 pci-0000:00:1f.5 -> ../controlC0
!!Aplay/Arecord output
!!--------------------
APLAY
**** List of PLAYBACK Hardware Devices ****
card 0: I82801BAICH2 [Intel 82801BA-ICH2], device 0: Intel ICH [Intel 82801BA-ICH2]
Subdevices: 1/1
Subdevice #0: subdevice #0
ARECORD
**** List of CAPTURE Hardware Devices ****
card 0: I82801BAICH2 [Intel 82801BA-ICH2], device 0: Intel ICH [Intel 82801BA-ICH2]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: I82801BAICH2 [Intel 82801BA-ICH2], device 1: Intel ICH - MIC ADC [Intel 82801BA-ICH2 - MIC ADC]
Subdevices: 1/1
Subdevice #0: subdevice #0
!!Amixer output
!!-------------
!!-------Mixer controls for card 0 [I82801BAICH2]
Card hw:0 'I82801BAICH2'/'Intel 82801BA-ICH2 with AD1885 at irq 10'
Mixer name : 'Analog Devices AD1885'
Components : 'AC97a:41445360'
Controls : 38
Simple ctrls : 27
Simple mixer control 'Master',0
Capabilities: pvolume pswitch pswitch-joined penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 63
Mono:
Front Left: Playback 62 [98%] [-1.50dB] [on]
Front Right: Playback 61 [97%] [-3.00dB] [on]
Simple mixer control 'Master Mono',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
Playback channels: Mono
Limits: Playback 0 - 31
Mono: Playback 31 [100%] [0.00dB] [on]
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitch pswitch-joined penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 63
Mono:
Front Left: Playback 63 [100%] [6.00dB] [on]
Front Right: Playback 63 [100%] [6.00dB] [on]
Simple mixer control 'Headphone Jack Sense',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
Simple mixer control '3D Control - Center',0
Capabilities: volume volume-joined penum
Playback channels: Mono
Capture channels: Mono
Limits: 0 - 15
Mono: 15 [100%]
Simple mixer control '3D Control - Depth',0
Capabilities: volume volume-joined penum
Playback channels: Mono
Capture channels: Mono
Limits: 0 - 15
Mono: 15 [100%]
Simple mixer control '3D Control - Switch',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'PCM',0
Capabilities: pvolume pswitch pswitch-joined penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 31 [100%] [12.00dB] [on]
Front Right: Playback 31 [100%] [12.00dB] [on]
Simple mixer control 'PCM Out Path & Mute',0
Capabilities: enum
Items: 'pre 3D' 'post 3D'
Item0: 'pre 3D'
Simple mixer control 'Line',0
Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive penum
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 31 [100%] [12.00dB] [on] Capture [off]
Front Right: Playback 31 [100%] [12.00dB] [on] Capture [off]
Simple mixer control 'Line Jack Sense',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'CD',0
Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive penum
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 31 [100%] [12.00dB] [on] Capture [off]
Front Right: Playback 31 [100%] [12.00dB] [on] Capture [off]
Simple mixer control 'Mic',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined cswitch cswitch-exclusive penum
Capture exclusive group: 0
Playback channels: Mono
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono: Playback 31 [100%] [12.00dB] [on]
Front Left: Capture [off]
Front Right: Capture [off]
Simple mixer control 'Mic Boost (+20dB)',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'Mic Select',0
Capabilities: enum
Items: 'Mic1' 'Mic2'
Item0: 'Mic1'
Simple mixer control 'Video',0
Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive penum
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 31 [100%] [12.00dB] [on] Capture [on]
Front Right: Playback 31 [100%] [12.00dB] [on] Capture [on]
Simple mixer control 'Phone',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined cswitch cswitch-exclusive penum
Capture exclusive group: 0
Playback channels: Mono
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono: Playback 31 [100%] [12.00dB] [off]
Front Left: Capture [off]
Front Right: Capture [off]
Simple mixer control 'PC Speaker',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
Playback channels: Mono
Limits: Playback 0 - 15
Mono: Playback 15 [100%] [0.00dB] [on]
Simple mixer control 'Aux',0
Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive penum
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 31 [100%] [12.00dB] [off] Capture [off]
Front Right: Playback 31 [100%] [12.00dB] [off] Capture [off]
Simple mixer control 'Mono Output Select',0
Capabilities: enum
Items: 'Mix' 'Mic'
Item0: 'Mix'
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch cswitch-joined penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 15
Front Left: Capture 8 [53%] [12.00dB] [off]
Front Right: Capture 8 [53%] [12.00dB] [off]
Simple mixer control 'Mix',0
Capabilities: cswitch cswitch-exclusive penum
Capture exclusive group: 0
Capture channels: Front Left - Front Right
Front Left: Capture [off]
Front Right: Capture [off]
Simple mixer control 'Mix Mono',0
Capabilities: cswitch cswitch-exclusive penum
Capture exclusive group: 0
Capture channels: Front Left - Front Right
Front Left: Capture [off]
Front Right: Capture [off]
Simple mixer control 'Digital Mono Direct',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'External Amplifier',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'Low Power Mixer',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'Zero Fill DAC',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
!!Alsactl output
!!--------------
--startcollapse--
state.I82801BAICH2 {
control.1 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Master Playback Switch'
value true
}
control.2 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 63'
comment.dbmin -9450
comment.dbmax 0
iface MIXER
name 'Master Playback Volume'
value.0 62
value.1 61
}
control.3 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Headphone Playback Switch'
value true
}
control.4 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 63'
comment.dbmin -8850
comment.dbmax 600
iface MIXER
name 'Headphone Playback Volume'
value.0 63
value.1 63
}
control.5 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Master Mono Playback Switch'
value true
}
control.6 {
comment.access 'read write'
comment.type INTEGER
comment.count 1
comment.range '0 - 31'
comment.dbmin -4650
comment.dbmax 0
iface MIXER
name 'Master Mono Playback Volume'
value 31
}
control.7 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'PC Speaker Playback Switch'
value true
}
control.8 {
comment.access 'read write'
comment.type INTEGER
comment.count 1
comment.range '0 - 15'
comment.dbmin -4500
comment.dbmax 0
iface MIXER
name 'PC Speaker Playback Volume'
value 15
}
control.9 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Phone Playback Switch'
value false
}
control.10 {
comment.access 'read write'
comment.type INTEGER
comment.count 1
comment.range '0 - 31'
comment.dbmin -3450
comment.dbmax 1200
iface MIXER
name 'Phone Playback Volume'
value 31
}
control.11 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Mic Playback Switch'
value true
}
control.12 {
comment.access 'read write'
comment.type INTEGER
comment.count 1
comment.range '0 - 31'
comment.dbmin -3450
comment.dbmax 1200
iface MIXER
name 'Mic Playback Volume'
value 31
}
control.13 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Mic Boost (+20dB)'
value true
}
control.14 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Line Playback Switch'
value true
}
control.15 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 31'
comment.dbmin -3450
comment.dbmax 1200
iface MIXER
name 'Line Playback Volume'
value.0 31
value.1 31
}
control.16 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'CD Playback Switch'
value true
}
control.17 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 31'
comment.dbmin -3450
comment.dbmax 1200
iface MIXER
name 'CD Playback Volume'
value.0 31
value.1 31
}
control.18 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Video Playback Switch'
value true
}
control.19 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 31'
comment.dbmin -3450
comment.dbmax 1200
iface MIXER
name 'Video Playback Volume'
value.0 31
value.1 31
}
control.20 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Aux Playback Switch'
value false
}
control.21 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 31'
comment.dbmin -3450
comment.dbmax 1200
iface MIXER
name 'Aux Playback Volume'
value.0 31
value.1 31
}
control.22 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'PCM Playback Switch'
value true
}
control.23 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 31'
comment.dbmin -3450
comment.dbmax 1200
iface MIXER
name 'PCM Playback Volume'
value.0 31
value.1 31
}
control.24 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 2
comment.item.0 Mic
comment.item.1 CD
comment.item.2 Video
comment.item.3 Aux
comment.item.4 Line
comment.item.5 Mix
comment.item.6 'Mix Mono'
comment.item.7 Phone
iface MIXER
name 'Capture Source'
value.0 Video
value.1 Video
}
control.25 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Capture Switch'
value false
}
control.26 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 15'
comment.dbmin 0
comment.dbmax 2250
iface MIXER
name 'Capture Volume'
value.0 8
value.1 8
}
control.27 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 'pre 3D'
comment.item.1 'post 3D'
iface MIXER
name 'PCM Out Path & Mute'
value 'pre 3D'
}
control.28 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name '3D Control - Switch'
value true
}
control.29 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Mix
comment.item.1 Mic
iface MIXER
name 'Mono Output Select'
value Mix
}
control.30 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Mic1
comment.item.1 Mic2
iface MIXER
name 'Mic Select'
value Mic1
}
control.31 {
comment.access 'read write'
comment.type INTEGER
comment.count 1
comment.range '0 - 15'
iface MIXER
name '3D Control - Center'
value 15
}
control.32 {
comment.access 'read write'
comment.type INTEGER
comment.count 1
comment.range '0 - 15'
iface MIXER
name '3D Control - Depth'
value 15
}
control.33 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Digital Mono Direct'
value true
}
control.34 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Low Power Mixer'
value true
}
control.35 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Zero Fill DAC'
value true
}
control.36 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Headphone Jack Sense'
value true
}
control.37 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Line Jack Sense'
value true
}
control.38 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'External Amplifier'
value true
}
}
--endcollapse--
!!All Loaded Modules
!!------------------
Module
snd_usb_audio
snd_usb_lib
snd_seq_midi
snd_seq_midi_event
snd_seq
snd_rawmidi
snd_seq_device
snd_hwdep
snd_pcm_oss
snd_mixer_oss
speedstep_lib
cpufreq_userspace
cpufreq_powersave
cpufreq_conservative
cpufreq_stats
ppdev
lp
sco
bridge
stp
bnep
l2cap
crc16
bluetooth
rfkill
i810
i915
drm_kms_helper
drm
i2c_algo_bit
video
output
binfmt_misc
fuse
loop
firewire_sbp2
firewire_core
crc_itu_t
snd_intel8x0
snd_ac97_codec
ac97_bus
snd_pcm
snd_timer
gspca_ov519
snd
gspca_main
videodev
soundcore
shpchp
v4l1_compat
intel_rng
i2c_i801
parport_pc
evdev
pci_hotplug
snd_page_alloc
rng_core
i2c_core
dcdbas
serio_raw
parport
pcspkr
processor
button
ext3
jbd
mbcache
sd_mod
crc_t10dif
ata_generic
ata_piix
thermal
uhci_hcd
3c59x
libata
ehci_hcd
floppy
thermal_sys
mii
usbcore
nls_base
scsi_mod
!!ALSA/HDA dmesg
!!--------------
