touchpad nie jest wykrywany

Wszystko związane z jądrem systemowym, sterownikami, sprzętem itp.
Awatar użytkownika
dedito
Moderator
Posty: 2877
Rejestracja: 18 listopada 2013, 21:07
Lokalizacja: Gliwice

Re: touchpad nie jest wykrywany

Post autor: dedito » 19 marca 2019, 08:28

Prawdopodobnie też nie ma jeszcze obsługi w kernelu tego konkretnego modelu.

Awatar użytkownika
arturromarr
Beginner
Posty: 137
Rejestracja: 14 sierpnia 2015, 01:21

Re: touchpad nie jest wykrywany

Post autor: arturromarr » 19 marca 2019, 08:43

A czym sprawdzić jak jest w moim 120S? Te laptopy mają taką samą obudowę, może touchpad-y też?
U mnie działa, jeśli faktycznie są takie same to może by coś dało się koledze pomóc porównując z moim.

Awatar użytkownika
dedito
Moderator
Posty: 2877
Rejestracja: 18 listopada 2013, 21:07
Lokalizacja: Gliwice

Re: touchpad nie jest wykrywany

Post autor: dedito » 19 marca 2019, 08:50

Wrzuć wyniki lspci -k i dmesg.

superserek
Posty: 31
Rejestracja: 12 marca 2019, 12:19

Re: touchpad nie jest wykrywany

Post autor: superserek » 19 marca 2019, 08:54

Kod: Zaznacz cały

acpidump | grep -C3 ELAN
  0180: 43 35 30 00 08 5F 55 49 44 0A 03 08 5F 53 30 57  C50.._UID..._S0W
  0190: 0A 04 08 5F 44 45 50 12 0C 01 5C 2E 5F 53 42 5F  ..._DEP...\._SB_
  01A0: 47 50 4F 30 14 42 06 5F 48 49 44 00 A0 13 93 54  GPO0.B._HID....T
  01B0: 43 50 44 0A 0B A4 0D 45 4C 41 4E 39 35 39 41 00  CPD....ELAN959A.
  01C0: A0 13 93 54 43 50 44 0A 02 A4 0D 53 59 4E 41 33  ...TCPD....SYNA3
  01D0: 33 38 38 00 A0 13 93 54 43 50 44 0A 0C A4 0D 53  388....TCPD....S
  01E0: 59 4E 41 33 32 36 39 00 A0 13 93 54 43 50 44 0A  YNA3269....TCPD.

superserek
Posty: 31
Rejestracja: 12 marca 2019, 12:19

Re: touchpad nie jest wykrywany

Post autor: superserek » 19 marca 2019, 08:55

@arturromarr - a co wpisałeś w grub?

edycja: i czy działają Ci klawisze funkcyjne FN?

Awatar użytkownika
dedito
Moderator
Posty: 2877
Rejestracja: 18 listopada 2013, 21:07
Lokalizacja: Gliwice

Re: touchpad nie jest wykrywany

Post autor: dedito » 19 marca 2019, 09:19

W wątku, gość patchuje sobie kernel dla S330.
https://askubuntu.com/questions/1049787 ... ot-working
analogicznie można zrobić dla ELAN959A

Awatar użytkownika
arturromarr
Beginner
Posty: 137
Rejestracja: 14 sierpnia 2015, 01:21

Re: touchpad nie jest wykrywany

Post autor: arturromarr » 19 marca 2019, 09:23

Kod: Zaznacz cały

lspci -k
00:00.0 Host bridge: Intel Corporation Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series Host Bridge (rev 0b)
        Subsystem: Lenovo Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series Host Bridge
00:00.1 Signal processing controller: Intel Corporation Device 5a8c (rev 0b)
        Kernel driver in use: proc_thermal
        Kernel modules: processor_thermal_device
00:02.0 VGA compatible controller: Intel Corporation Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series Integrated Graphics Controller (rev 0b)
        Subsystem: Lenovo Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series Integrated Graphics Controller
        Kernel driver in use: i915
        Kernel modules: i915
00:0e.0 Audio device: Intel Corporation Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series Audio Cluster (rev 0b)
        Subsystem: Lenovo Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series Audio Cluster
        Kernel driver in use: snd_hda_intel
        Kernel modules: snd_hda_intel, snd_soc_skl
00:0f.0 Communication controller: Intel Corporation Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series Trusted Execution Engine (rev 0b)
        Kernel driver in use: mei_me
        Kernel modules: mei_me
00:12.0 SATA controller: Intel Corporation Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series SATA AHCI Controller (rev 0b)
        Subsystem: Lenovo Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series SATA AHCI Controller
        Kernel driver in use: ahci
        Kernel modules: ahci
00:14.0 PCI bridge: Intel Corporation Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series PCI Express Port B #1 (rev fb)
        Kernel driver in use: pcieport
        Kernel modules: shpchp
00:14.1 PCI bridge: Intel Corporation Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series PCI Express Port B #2 (rev fb)
        Kernel driver in use: pcieport
        Kernel modules: shpchp
00:15.0 USB controller: Intel Corporation Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series USB xHCI (rev 0b)
        Subsystem: Lenovo Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series USB xHCI
        Kernel driver in use: xhci_hcd
        Kernel modules: xhci_pci
00:16.0 Signal processing controller: Intel Corporation Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series I2C Controller #1 (rev 0b)
        Subsystem: Lenovo Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series I2C Controller
        Kernel driver in use: intel-lpss
        Kernel modules: intel_lpss_pci
00:16.2 Signal processing controller: Intel Corporation Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series I2C Controller #3 (rev 0b)
        Subsystem: Lenovo Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series I2C Controller
        Kernel driver in use: intel-lpss
        Kernel modules: intel_lpss_pci
00:1c.0 SD Host controller: Intel Corporation Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series eMMC Controller (rev 0b)
        Subsystem: Lenovo Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series eMMC Controller
        Kernel driver in use: sdhci-pci
        Kernel modules: sdhci_pci
00:1f.0 ISA bridge: Intel Corporation Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series Low Pin Count Interface (rev 0b)
        Subsystem: Lenovo Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series Low Pin Count Interface
00:1f.1 SMBus: Intel Corporation Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series SMBus Controller (rev 0b)
        Kernel driver in use: i801_smbus
        Kernel modules: i2c_i801
01:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01)
        Subsystem: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader
        Kernel driver in use: rtsx_pci
        Kernel modules: rtsx_pci
02:00.0 Network controller: Intel Corporation Intel Dual Band Wireless-AC 3165 Plus Bluetooth (rev 99)
        Subsystem: Intel Corporation Intel Dual Band Wireless-AC 3165 Plus Bluetooth
        Kernel driver in use: iwlwifi
        Kernel modules: iwlwifi

Kod: Zaznacz cały

dmesg           
[    0.000000] Linux version 4.9.0-8-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP Debian 4.9.144-3.1 (2019-02-19)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-8-amd64 root=UUID=759d4052-003b-4104-bfd3-81638a3affe7 ro quiet
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[3]:  576, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  640, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1b, context size is 704 bytes, using 'compacted' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000008bfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000008c000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000010000000-0x0000000012150fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000012151000-0x0000000075746fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000075747000-0x000000007635ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000076360000-0x000000007644ffff] type 20
[    0.000000] BIOS-e820: [mem 0x0000000076450000-0x000000007928afff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007928b000-0x00000000792adfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000792ae000-0x00000000792aefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000792af000-0x00000000792eafff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000792eb000-0x000000007932afff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007932b000-0x000000007a685fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007a686000-0x000000007a686fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007a687000-0x000000007a6b0fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007a6b1000-0x000000007a70ffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007a710000-0x000000007a72ffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007a730000-0x000000007affffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007b000000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.50 by Phoenix Technologies Ltd.
[    0.000000] efi:  SMBIOS=0x76156000  SMBIOS 3.0=0x76153000  ACPI=0x7932a000  ACPI 2.0=0x7932a014  ESRT=0x759b3000 
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 7F80000000 write-back
[    0.000000]   1 base 007C000000 mask 7FFC000000 uncachable
[    0.000000]   2 base 007B000000 mask 7FFF000000 uncachable
[    0.000000]   3 base 0100000000 mask 7F80000000 write-back
[    0.000000]   4 base 00FF800000 mask 70FF800000 write-combining
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0x7b000 max_arch_pfn = 0x400000000
[    0.000000] esrt: Reserving ESRT space from 0x00000000759b3000 to 0x00000000759b3060.
[    0.000000] Base memory trampoline at [ffff894a4005d000] 5d000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x11dd34000, 0x11dd34fff] PGTABLE
[    0.000000] BRK [0x11dd35000, 0x11dd35fff] PGTABLE
[    0.000000] BRK [0x11dd36000, 0x11dd36fff] PGTABLE
[    0.000000] BRK [0x11dd37000, 0x11dd37fff] PGTABLE
[    0.000000] BRK [0x11dd38000, 0x11dd38fff] PGTABLE
[    0.000000] BRK [0x11dd39000, 0x11dd39fff] PGTABLE
[    0.000000] BRK [0x11dd3a000, 0x11dd3afff] PGTABLE
[    0.000000] BRK [0x11dd3b000, 0x11dd3bfff] PGTABLE
[    0.000000] BRK [0x11dd3c000, 0x11dd3cfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35cc5000-0x36e59fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000000007932A014 000024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 0x000000007930A188 0000FC (v01 LENOVO CB-01    00000003 PTEC 00000002)
[    0.000000] ACPI: FACP 0x0000000079322000 00010C (v05 LENOVO CB-01    00000003 PTEC 00000002)
[    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/16 (20160831/tbfadt-603)
[    0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aEventBlock: 16, using default 32 (20160831/tbfadt-708)
[    0.000000] ACPI: DSDT 0x0000000079312000 008304 (v02 LENOVO EDK2     00000003 BRXT 0100000D)
[    0.000000] ACPI: FACS 0x00000000792D4000 000040
[    0.000000] ACPI: SSDT 0x0000000079328000 0003CC (v02 LENOVO Tpm2Tabl 00001000 INTL 20150818)
[    0.000000] ACPI: TPM2 0x0000000079327000 000034 (v03 LENOVO CB-01    00000000 PTEC 00000002)
[    0.000000] ACPI: UEFI 0x00000000792D8000 000042 (v01 LENOVO CB-01    00000002 PTEC 00000002)
[    0.000000] ACPI: BDAT 0x0000000079326000 000030 (v02 LENOVO CB-01    00000000 PTEC 00000002)
[    0.000000] ACPI: DBG2 0x0000000079325000 000072 (v00 LENOVO CB-01    00000003 PTEC 00000002)
[    0.000000] ACPI: DBGP 0x0000000079324000 000034 (v01 LENOVO CB-01    00000003 PTEC 00000002)
[    0.000000] ACPI: HPET 0x0000000079321000 000038 (v01 LENOVO CB-01    00000003 PTEC 00000002)
[    0.000000] ACPI: LPIT 0x0000000079320000 00005C (v01 LENOVO CB-01    00000003 PTEC 00000002)
[    0.000000] ACPI: APIC 0x000000007931F000 000084 (v03 LENOVO CB-01    00000003 PTEC 00000002)
[    0.000000] ACPI: MCFG 0x000000007931E000 00003C (v01 LENOVO CB-01    00000003 PTEC 00000002)
[    0.000000] ACPI: NPKT 0x000000007931D000 000065 (v01 LENOVO CB-01    00000003 PTEC 00000002)
[    0.000000] ACPI: PRAM 0x000000007931C000 000030 (v01 LENOVO CB-01    00000003 PTEC 00000002)
[    0.000000] ACPI: WSMT 0x000000007931B000 000028 (v01 LENOVO CB-01    00000003 PTEC 00000002)
[    0.000000] ACPI: SSDT 0x0000000079310000 0012F8 (v02 LENOVO DptfTab  00000003 BRXT 0100000D)
[    0.000000] ACPI: SSDT 0x000000007930F000 000248 (v01 LENOVO Platform 00001000 INTL 20150818)
[    0.000000] ACPI: BATB 0x000000007930E000 00004A (v02 LENOVO CB-01    00000000 PTEC 00000002)
[    0.000000] ACPI: SSDT 0x000000007930D000 000400 (v02 LENOVO Cpu0Ist  00003000 INTL 20150818)
[    0.000000] ACPI: SSDT 0x000000007930C000 00072B (v02 LENOVO CpuSsdt  00003000 INTL 20150818)
[    0.000000] ACPI: SSDT 0x000000007930B000 00032D (v02 LENOVO Cpu0Tst  00003000 INTL 20150818)
[    0.000000] ACPI: SSDT 0x0000000079329000 00017C (v02 LENOVO ApTst    00003000 INTL 20150818)
[    0.000000] ACPI: MSDM 0x0000000079309000 000055 (v03 LENOVO CB-01    00000000 PTEC 00000002)
[    0.000000] ACPI: SSDT 0x0000000079306000 002760 (v02 LENOVO SaSsdt   00003000 INTL 20150818)
[    0.000000] ACPI: FPDT 0x0000000079305000 000044 (v01 LENOVO CB-01    00000002 PTEC 00000002)
[    0.000000] ACPI: BGRT 0x0000000079304000 000038 (v01 LENOVO CB-01    00000002 PTEC 00000002)
[    0.000000] ACPI: WDAT 0x0000000079323000 000104 (v01 LENOVO CB-01    00000000 PTEC 00000002)
[    0.000000] ACPI: UEFI 0x00000000792CF000 00017A (v01 LENOVO CB-01    00000001 PTEC 00000002)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000017fffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x17fffb000-0x17fffffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000017fffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.000000]   node   0: [mem 0x0000000000059000-0x000000000008bfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000000fffffff]
[    0.000000]   node   0: [mem 0x0000000012151000-0x0000000075746fff]
[    0.000000]   node   0: [mem 0x000000007932b000-0x000000007a685fff]
[    0.000000]   node   0: [mem 0x000000007a6b1000-0x000000007a70ffff]
[    0.000000]   node   0: [mem 0x000000007a730000-0x000000007affffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000017fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000017fffffff]
[    0.000000] On node 0 totalpages: 1004042
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 74 pages reserved
[    0.000000]   DMA zone: 3978 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7434 pages used for memmap
[    0.000000]   DMA32 zone: 475776 pages, LIFO batch:31
[    0.000000]   Normal zone: 8192 pages used for memmap
[    0.000000]   Normal zone: 524288 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x000000007c000000-0x000000007fffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-119
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0008c000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x10000000-0x12150fff]
[    0.000000] PM: Registered nosave memory: [mem 0x75747000-0x7635ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x76360000-0x7644ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x76450000-0x7928afff]
[    0.000000] PM: Registered nosave memory: [mem 0x7928b000-0x792adfff]
[    0.000000] PM: Registered nosave memory: [mem 0x792ae000-0x792aefff]
[    0.000000] PM: Registered nosave memory: [mem 0x792af000-0x792eafff]
[    0.000000] PM: Registered nosave memory: [mem 0x792eb000-0x7932afff]
[    0.000000] PM: Registered nosave memory: [mem 0x7a686000-0x7a686fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7a687000-0x7a6b0fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7a710000-0x7a72ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7b000000-0x7fffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x80000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xe3ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe4000000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xffffffff]
[    0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 35 pages/cpu @ffff894bbfc00000 s105304 r8192 d29864 u524288
[    0.000000] pcpu-alloc: s105304 r8192 d29864 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 988278
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-8-amd64 root=UUID=759d4052-003b-4104-bfd3-81638a3affe7 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3763028K/4016168K available (6268K kernel code, 1161K rwdata, 2872K rodata, 1424K init, 656K bss, 253140K reserved, 0K cma-reserved)
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 64.
[    0.000000]  RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:33024 nr_irqs:1024 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: PIT calibration matches HPET. 1 loops
[    0.000000] tsc: Detected 1094.439 MHz processor
[    0.000115] Calibrating delay loop (skipped), value calculated using timer frequency.. 2188.80 BogoMIPS (lpj=4377600)
[    0.000122] pid_max: default: 32768 minimum: 301
[    0.000165] ACPI: Core revision 20160831
[    0.021508] ACPI: 9 ACPI AML tables successfully acquired and loaded
[    0.023149] Security Framework initialized
[    0.023153] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.023168] AppArmor: AppArmor disabled by boot time parameter
[    0.023798] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.026296] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.027402] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.027420] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.028226] mce: CPU supports 7 MCE banks
[    0.028270] CPU0: Thermal monitoring enabled (TM1)
[    0.028353] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[    0.028355] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.028360] Spectre V2 : Mitigation: Full generic retpoline
[    0.028361] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.028363] Speculative Store Bypass: Vulnerable
[    0.045037] Freeing SMP alternatives memory: 24K
[    0.065010] ftrace: allocating 25295 entries in 99 pages
[    0.143937] smpboot: Max logical packages: 1
[    0.145324] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.150496] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.190203] TSC deadline timer enabled
[    0.190213] smpboot: CPU0: Intel(R) Pentium(R) CPU N4200 @ 1.10GHz (family: 0x6, model: 0x5c, stepping: 0x9)
[    0.190226] Performance Events: PEBS fmt3+, Goldmont events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.190262] ... version:                4
[    0.190263] ... bit width:              48
[    0.190265] ... generic registers:      4
[    0.190266] ... value mask:             0000ffffffffffff
[    0.190268] ... max period:             00007fffffffffff
[    0.190269] ... fixed-purpose events:   3
[    0.190271] ... event mask:             000000070000000f
[    0.192071] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.192552] x86: Booting SMP configuration:
[    0.192555] .... node  #0, CPUs:      #1 #2 #3
[    0.201598] x86: Booted up 1 node, 4 CPUs
[    0.201603] smpboot: Total of 4 processors activated (8755.20 BogoMIPS)
[    0.205070] devtmpfs: initialized
[    0.205272] x86/mm: Memory block size: 128MB
[    0.211988] PM: Registering ACPI NVS region [mem 0x7928b000-0x792adfff] (143360 bytes)
[    0.211999] PM: Registering ACPI NVS region [mem 0x792af000-0x792eafff] (245760 bytes)
[    0.212021] PM: Registering ACPI NVS region [mem 0x7a686000-0x7a686fff] (4096 bytes)
[    0.212172] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.212199] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.212360] pinctrl core: initialized pinctrl subsystem
[    0.214917] NET: Registered protocol family 16
[    0.228144] cpuidle: using governor ladder
[    0.244200] cpuidle: using governor menu
[    0.244301] ACPI: bus type PCI registered
[    0.244305] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.244527] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[    0.244532] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[    0.244547] PCI: Using configuration type 1 for base access
[    0.256645] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[    0.256647] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.257537] ACPI: Added _OSI(Module Device)
[    0.257539] ACPI: Added _OSI(Processor Device)
[    0.257541] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.257543] ACPI: Added _OSI(Processor Aggregator Device)
[    0.258673] ACPI: Executed 3 blocks of module-level executable AML code
[    0.274356] ACPI: Dynamic OEM Table Load:
[    0.274379] ACPI: SSDT 0xFFFF894BBA79B200 000102 (v02 PmRef  Cpu0Cst  00003001 INTL 20150818)
[    0.275432] ACPI: Dynamic OEM Table Load:
[    0.275451] ACPI: SSDT 0xFFFF894BBA79BC00 00015F (v02 PmRef  ApIst    00003000 INTL 20150818)
[    0.276042] ACPI: Dynamic OEM Table Load:
[    0.276059] ACPI: SSDT 0xFFFF894BBA78EB40 00008D (v02 PmRef  ApCst    00003000 INTL 20150818)
[    0.278503] ACPI : EC: EC started
[    0.278505] ACPI : EC: interrupt blocked
[    0.388558] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as first EC
[    0.388563] ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0x3f, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.388567] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as boot DSDT EC to handle transactions
[    0.388569] ACPI: Interpreter enabled
[    0.388635] ACPI: (supports S0 S3 S4 S5)
[    0.388638] ACPI: Using IOAPIC for interrupt routing
[    0.388728] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.465360] ACPI: Power Resource [FN00] (on)
[    0.466821] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.466836] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.468776] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.468812] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.470645] PCI host bridge to bus 0000:00
[    0.470651] pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
[    0.470655] pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
[    0.470659] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
[    0.470663] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.470667] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.470671] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.470674] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[    0.470678] pci_bus 0000:00: root bus resource [mem 0x7c000001-0x7fffffff window]
[    0.470682] pci_bus 0000:00: root bus resource [mem 0x7b800001-0x7bffffff window]
[    0.470685] pci_bus 0000:00: root bus resource [mem 0x80000000-0xcfffffff window]
[    0.470689] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff window]
[    0.470694] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.470717] pci 0000:00:00.0: [8086:5af0] type 00 class 0x060000
[    0.471433] pci 0000:00:00.1: [8086:5a8c] type 00 class 0x118000
[    0.471477] pci 0000:00:00.1: reg 0x10: [mem 0x91310000-0x91317fff 64bit]
[    0.472226] pci 0000:00:02.0: [8086:5a84] type 00 class 0x030000
[    0.472249] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit]
[    0.472265] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
[    0.472276] pci 0000:00:02.0: reg 0x20: [io  0x1000-0x103f]
[    0.473058] pci 0000:00:0e.0: [8086:5a98] type 00 class 0x040300
[    0.473093] pci 0000:00:0e.0: reg 0x10: [mem 0x91318000-0x9131bfff 64bit]
[    0.473164] pci 0000:00:0e.0: reg 0x20: [mem 0x91000000-0x910fffff 64bit]
[    0.473273] pci 0000:00:0e.0: PME# supported from D0 D3hot D3cold
[    0.473892] pci 0000:00:0e.0: System wakeup disabled by ACPI
[    0.474022] pci 0000:00:0f.0: [8086:5a9a] type 00 class 0x078000
[    0.474070] pci 0000:00:0f.0: reg 0x10: [mem 0x9131e000-0x9131efff 64bit]
[    0.474248] pci 0000:00:0f.0: PME# supported from D3hot
[    0.474867] pci 0000:00:12.0: [8086:5ae3] type 00 class 0x010601
[    0.474905] pci 0000:00:12.0: reg 0x10: [mem 0x9131c000-0x9131dfff]
[    0.474920] pci 0000:00:12.0: reg 0x14: [mem 0x9132b000-0x9132b0ff]
[    0.474936] pci 0000:00:12.0: reg 0x18: [io  0x1080-0x1087]
[    0.474951] pci 0000:00:12.0: reg 0x1c: [io  0x1088-0x108b]
[    0.474968] pci 0000:00:12.0: reg 0x20: [io  0x1060-0x107f]
[    0.474984] pci 0000:00:12.0: reg 0x24: [mem 0x91329000-0x913297ff]
[    0.475086] pci 0000:00:12.0: PME# supported from D3hot
[    0.475688] pci 0000:00:14.0: [8086:5ad6] type 01 class 0x060400
[    0.475802] pci 0000:00:14.0: PME# supported from D0 D3hot D3cold
[    0.476306] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.476417] pci 0000:00:14.1: [8086:5ad7] type 01 class 0x060400
[    0.476520] pci 0000:00:14.1: PME# supported from D0 D3hot D3cold
[    0.477040] pci 0000:00:14.1: System wakeup disabled by ACPI
[    0.477195] pci 0000:00:15.0: [8086:5aa8] type 00 class 0x0c0330
[    0.477233] pci 0000:00:15.0: reg 0x10: [mem 0x91300000-0x9130ffff 64bit]
[    0.477382] pci 0000:00:15.0: PME# supported from D3hot D3cold
[    0.477907] pci 0000:00:15.0: System wakeup disabled by ACPI
[    0.478052] pci 0000:00:16.0: [8086:5aac] type 00 class 0x118000
[    0.478091] pci 0000:00:16.0: reg 0x10: [mem 0x91321000-0x91321fff 64bit]
[    0.478115] pci 0000:00:16.0: reg 0x18: [mem 0x91322000-0x91322fff 64bit]
[    0.478812] pci 0000:00:16.2: [8086:5ab0] type 00 class 0x118000
[    0.478853] pci 0000:00:16.2: reg 0x10: [mem 0x91323000-0x91323fff 64bit]
[    0.478878] pci 0000:00:16.2: reg 0x18: [mem 0x91324000-0x91324fff 64bit]
[    0.479612] pci 0000:00:1c.0: [8086:5acc] type 00 class 0x080501
[    0.479646] pci 0000:00:1c.0: reg 0x10: [mem 0x91327000-0x91327fff 64bit]
[    0.479668] pci 0000:00:1c.0: reg 0x18: [mem 0x91328000-0x91328fff 64bit]
[    0.480396] pci 0000:00:1f.0: [8086:5ae8] type 00 class 0x060100
[    0.481169] pci 0000:00:1f.1: [8086:5ad4] type 00 class 0x0c0500
[    0.481230] pci 0000:00:1f.1: reg 0x10: [mem 0x9132a000-0x9132a0ff 64bit]
[    0.481328] pci 0000:00:1f.1: reg 0x20: [io  0x1040-0x105f]
[    0.482176] pci 0000:01:00.0: [10ec:5229] type 00 class 0xff0000
[    0.482224] pci 0000:01:00.0: reg 0x10: [mem 0x91200000-0x91200fff]
[    0.482401] pci 0000:01:00.0: can't set Max Payload Size to 256; if necessary, use "pci=pcie_bus_safe" and report a bug
[    0.482589] pci 0000:01:00.0: supports D1 D2
[    0.482593] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
[    0.482715] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.492616] pci 0000:00:14.0: PCI bridge to [bus 01]
[    0.492626] pci 0000:00:14.0:   bridge window [mem 0x91200000-0x912fffff]
[    0.493079] pci 0000:02:00.0: [8086:3166] type 00 class 0x028000
[    0.493332] pci 0000:02:00.0: reg 0x10: [mem 0x91100000-0x91101fff 64bit]
[    0.493609] pci 0000:02:00.0: can't set Max Payload Size to 256; if necessary, use "pci=pcie_bus_safe" and report a bug
[    0.494080] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.494386] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.504749] pci 0000:00:14.1: PCI bridge to [bus 02]
[    0.504758] pci 0000:00:14.1:   bridge window [mem 0x91100000-0x911fffff]
[    0.534752] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.534945] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.535126] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.535308] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.535489] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.535686] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.535869] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.536053] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.544252] ACPI: Enabled 5 GPEs in block 00 to 7F
[    0.544450] ACPI : EC: interrupt unblocked
[    0.544492] ACPI : EC: event unblocked
[    0.544537] ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0x3f, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.544541] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as boot DSDT EC to handle transactions and events
[    0.544857] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.544861] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.544871] vgaarb: loaded
[    0.544874] vgaarb: bridge control possible 0000:00:02.0
[    0.544991] Registered efivars operations
[    0.583273] PCI: Using ACPI for IRQ routing
[    0.590700] PCI: pci_cache_line_size set to 64 bytes
[    0.590919] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.590924] e820: reserve RAM buffer [mem 0x0008c000-0x0008ffff]
[    0.590926] e820: reserve RAM buffer [mem 0x75747000-0x77ffffff]
[    0.590929] e820: reserve RAM buffer [mem 0x7a686000-0x7bffffff]
[    0.590932] e820: reserve RAM buffer [mem 0x7a710000-0x7bffffff]
[    0.590935] e820: reserve RAM buffer [mem 0x7b000000-0x7bffffff]
[    0.591413] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.591430] hpet0: 8 comparators, 64-bit 19.200000 MHz counter
[    0.593507] clocksource: Switched to clocksource hpet
[    0.613772] VFS: Disk quotas dquot_6.6.0
[    0.613853] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.614116] pnp: PnP ACPI init
[    0.642538] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.642544] system 00:00: [io  0x0400-0x047f] has been reserved
[    0.642548] system 00:00: [io  0x0500-0x05fe] has been reserved
[    0.642553] system 00:00: [io  0x0600-0x061f] has been reserved
[    0.642558] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.642569] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.642686] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.643209] system 00:02: [mem 0xe0000000-0xefffffff] could not be reserved
[    0.643214] system 00:02: [mem 0xfea00000-0xfeafffff] has been reserved
[    0.643219] system 00:02: [mem 0xfed01000-0xfed01fff] has been reserved
[    0.643223] system 00:02: [mem 0xfed03000-0xfed03fff] has been reserved
[    0.643228] system 00:02: [mem 0xfed06000-0xfed06fff] has been reserved
[    0.643233] system 00:02: [mem 0xfed08000-0xfed09fff] has been reserved
[    0.643237] system 00:02: [mem 0xfed80000-0xfedbffff] has been reserved
[    0.643242] system 00:02: [mem 0xfed1c000-0xfed1cfff] has been reserved
[    0.643248] system 00:02: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.643254] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.643876] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.644356] pnp: PnP ACPI: found 4 devices
[    0.657289] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.657349] pci 0000:00:14.0: PCI bridge to [bus 01]
[    0.657362] pci 0000:00:14.0:   bridge window [mem 0x91200000-0x912fffff]
[    0.657374] pci 0000:00:14.1: PCI bridge to [bus 02]
[    0.657382] pci 0000:00:14.1:   bridge window [mem 0x91100000-0x911fffff]
[    0.657395] pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
[    0.657399] pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
[    0.657403] pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
[    0.657406] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.657410] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.657414] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.657418] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[    0.657421] pci_bus 0000:00: resource 11 [mem 0x7c000001-0x7fffffff window]
[    0.657425] pci_bus 0000:00: resource 12 [mem 0x7b800001-0x7bffffff window]
[    0.657429] pci_bus 0000:00: resource 13 [mem 0x80000000-0xcfffffff window]
[    0.657433] pci_bus 0000:00: resource 14 [mem 0xe0000000-0xefffffff window]
[    0.657437] pci_bus 0000:01: resource 1 [mem 0x91200000-0x912fffff]
[    0.657442] pci_bus 0000:02: resource 1 [mem 0x91100000-0x911fffff]
[    0.657848] NET: Registered protocol family 2
[    0.658411] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.658671] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.659028] TCP: Hash tables configured (established 32768 bind 32768)
[    0.659117] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.659190] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.659426] NET: Registered protocol family 1
[    0.659473] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.660299] PCI: CLS 64 bytes, default 64
[    0.660453] Unpacking initramfs...
[    1.499003] Freeing initrd memory: 18004K
[    1.499045] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.499051] software IO TLB [mem 0x6dec4000-0x71ec4000] (64MB) mapped at [ffff894aadec4000-ffff894ab1ec3fff]
[    1.500145] audit: initializing netlink subsys (disabled)
[    1.500198] audit: type=2000 audit(1552980202.455:1): initialized
[    1.501449] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[    1.501631] zbud: loaded
[    1.504439] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    1.504564] io scheduler noop registered
[    1.504566] io scheduler deadline registered
[    1.504605] io scheduler cfq registered (default)
[    1.506032] pcieport 0000:00:14.0: Signaling PME through PCIe PME interrupt
[    1.506037] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    1.506045] pcie_pme 0000:00:14.0:pcie001: service driver pcie_pme loaded
[    1.506092] pcieport 0000:00:14.1: Signaling PME through PCIe PME interrupt
[    1.506096] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    1.506103] pcie_pme 0000:00:14.1:pcie001: service driver pcie_pme loaded
[    1.506135] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.506150] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.506211] efifb: probing for efifb
[    1.506254] efifb: framebuffer at 0x80000000, using 8128k, total 8128k
[    1.506257] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[    1.506258] efifb: scrolling: redraw
[    1.506262] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.521952] Console: switching to colour frame buffer device 240x67
[    1.537145] fb0: EFI VGA frame buffer device
[    1.537179] intel_idle: MWAIT substates: 0x11242020
[    1.537182] intel_idle: v0.4.1 model 0x5C
[    1.537881] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.541445] GHES: HEST is not enabled!
[    1.541771] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.543964] Linux agpgart interface v0.103
[    1.544198] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.544200] AMD IOMMUv2 functionality not available on this system
[    1.545171] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    1.545173] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    1.546681] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.547586] mousedev: PS/2 mouse device common for all mice
[    1.547781] rtc_cmos 00:03: RTC can wake from S4
[    1.548507] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.548638] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.548676] intel_pstate: Intel P-state driver initializing
[    1.549624] ledtrig-cpu: registered to indicate activity on CPUs
[    1.551407] NET: Registered protocol family 10
[    1.552335] mip6: Mobile IPv6
[    1.552342] NET: Registered protocol family 17
[    1.552349] mpls_gso: MPLS GSO support
[    1.553196] microcode: sig=0x506c9, pf=0x1, revision=0x26
[    1.553549] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.554483] registered taskstats version 1
[    1.554541] zswap: loaded using pool lzo/zbud
[    1.555311] ima: No TPM chip found, activating TPM-bypass!
[    1.555318] ima: Allocated hash algorithm: sha256
[    1.556597] rtc_cmos 00:03: setting system clock to 2019-03-19 07:23:23 UTC (1552980203)
[    1.556887] PM: Hibernation image not present or could not be loaded.
[    1.559022] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.903173] Freeing unused kernel memory: 1424K
[    1.903176] Write protecting the kernel read-only data: 12288k
[    1.905372] Freeing unused kernel memory: 1908K
[    1.909233] Freeing unused kernel memory: 1224K
[    1.918102] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.956968] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.957179] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.957204] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.020192] hidraw: raw HID events driver (C) Jiri Kosina
[    2.023966] thermal LNXTHERM:00: registered as thermal_zone0
[    2.023969] ACPI: Thermal Zone [TZ01] (26 C)
[    2.027270] rtsx_pci 0000:01:00.0: enabling device (0000 -> 0002)
[    2.027356] SCSI subsystem initialized
[    2.027529] rtsx_pci 0000:01:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 367
[    2.031144] ACPI: bus type USB registered
[    2.031186] usbcore: registered new interface driver usbfs
[    2.031211] usbcore: registered new interface driver hub
[    2.031250] usbcore: registered new device driver usb
[    2.031615] libata version 3.00 loaded.
[    2.032460] sdhci: Secure Digital Host Controller Interface driver
[    2.032461] sdhci: Copyright(c) Pierre Ossman
[    2.033366] sdhci-pci 0000:00:1c.0: SDHCI controller found [8086:5acc] (rev b)
[    2.039594] mmc0: SDHCI controller on PCI [0000:00:1c.0] using ADMA 64-bit
[    2.039716] ahci 0000:00:12.0: version 3.0
[    2.040114] ahci 0000:00:12.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    2.040118] ahci 0000:00:12.0: flags: 64bit ncq sntf pm clo only pmp pio slum part deso sadm sds apst 
[    2.040902] scsi host0: ahci
[    2.041191] scsi host1: ahci
[    2.041273] ata1: SATA max UDMA/133 abar m2048@0x91329000 port 0x91329100 irq 368
[    2.041277] ata2: SATA max UDMA/133 abar m2048@0x91329000 port 0x91329180 irq 368
[    2.041826] xhci_hcd 0000:00:15.0: xHCI Host Controller
[    2.041839] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1
[    2.042982] xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x01109810
[    2.042989] xhci_hcd 0000:00:15.0: cache line size of 64 is not supported
[    2.043451] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.043453] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.043455] usb usb1: Product: xHCI Host Controller
[    2.043456] usb usb1: Manufacturer: Linux 4.9.0-8-amd64 xhci-hcd
[    2.043458] usb usb1: SerialNumber: 0000:00:15.0
[    2.043718] hub 1-0:1.0: USB hub found
[    2.043738] hub 1-0:1.0: 8 ports detected
[    2.045219] xhci_hcd 0000:00:15.0: xHCI Host Controller
[    2.045227] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2
[    2.045287] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    2.045289] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.045291] usb usb2: Product: xHCI Host Controller
[    2.045292] usb usb2: Manufacturer: Linux 4.9.0-8-amd64 xhci-hcd
[    2.045294] usb usb2: SerialNumber: 0000:00:15.0
[    2.045495] hub 2-0:1.0: USB hub found
[    2.045564] hub 2-0:1.0: 7 ports detected
[    2.046301] usb: port power management may be unreliable
[    2.047201] i801_smbus 0000:00:1f.1: SPD Write Disable is set
[    2.047257] i801_smbus 0000:00:1f.1: SMBus using PCI interrupt
[    2.052002] SSE version of gcm_enc/dec engaged.
[    2.238520] mmc0: new HS200 MMC card at address 0001
[    2.241234] mmcblk0: mmc0:0001 DF4064 58.2 GiB 
[    2.241695] mmcblk0boot0: mmc0:0001 DF4064 partition 1 4.00 MiB
[    2.242156] mmcblk0boot1: mmc0:0001 DF4064 partition 2 4.00 MiB
[    2.242990] mmcblk0rpmb: mmc0:0001 DF4064 partition 3 4.00 MiB
[    2.248262]  mmcblk0: p1 p2 p3
[    2.284866] random: fast init done
[    2.357590] ata1: SATA link down (SStatus 4 SControl 300)
[    2.361984] ata2: SATA link down (SStatus 4 SControl 300)
[    2.373646] usb 1-2: new full-speed USB device number 2 using xhci_hcd
[    2.509575] tsc: Refined TSC clocksource calibration: 1094.399 MHz
[    2.509597] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0xfc66e667aa, max_idle_ns: 440795255680 ns
[    2.521322] usb 1-2: New USB device found, idVendor=1ea7, idProduct=0064
[    2.521330] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.521335] usb 1-2: Product: 2.4G Mouse
[    2.531720] usbcore: registered new interface driver usbhid
[    2.531724] usbhid: USB HID core driver
[    2.534742] input: 2.4G Mouse as /devices/pci0000:00/0000:00:15.0/usb1/1-2/1-2:1.0/0003:1EA7:0064.0001/input/input1
[    2.535224] hid-generic 0003:1EA7:0064.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [2.4G Mouse] on usb-0000:00:15.0-2/input0
[    2.641583] usb 1-7: new full-speed USB device number 3 using xhci_hcd
[    2.690600] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    2.783461] usb 1-7: New USB device found, idVendor=8087, idProduct=0a2a
[    2.783466] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.901570] usb 1-8: new high-speed USB device number 4 using xhci_hcd
[    2.925677] ip_tables: (C) 2000-2006 Netfilter Core Team
[    3.078532] usb 1-8: New USB device found, idVendor=0bda, idProduct=5627
[    3.078536] usb 1-8: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    3.078538] usb 1-8: Product: EasyCamera
[    3.078539] usb 1-8: Manufacturer: 8SSC20Q74306A1YD8193448
[    3.078541] usb 1-8: SerialNumber: 200901010001
[    3.240937] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    3.241394] systemd[1]: Detected architecture x86-64.
[    3.242054] systemd[1]: Set hostname to <debian>.
[    3.452023] systemd[1]: Created slice User and Session Slice.
[    3.452346] systemd[1]: Listening on udev Kernel Socket.
[    3.452615] systemd[1]: Listening on Journal Audit Socket.
[    3.452822] systemd[1]: Listening on Journal Socket (/dev/log).
[    3.453023] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    3.453161] systemd[1]: Listening on fsck to fsckd communication Socket.
[    3.453640] systemd[1]: Created slice System Slice.
[    3.488026] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
[    3.503843] lp: driver loaded but no devices found
[    3.511235] ppdev: user-space parallel port driver
[    3.530111] clocksource: Switched to clocksource tsc
[    3.581840] systemd-journald[214]: Received request to flush runtime journal from PID 1
[    3.692759] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C09:00/PNP0C0D:00/input/input2
[    3.693251] ACPI: Lid Switch [LID0]
[    3.693419] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[    3.693425] ACPI: Power Button [PWRB]
[    3.693493] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    3.693496] ACPI: Power Button [PWRF]
[    3.697887] ACPI: AC Adapter [ADP1] (on-line)
[    3.766503] wmi: Mapper loaded
[    3.783702] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:01/input/input5
[    3.801849] idma64 idma64.0: Found Intel integrated DMA 64-bit
[    3.802273] idma64 idma64.1: Found Intel integrated DMA 64-bit
[    3.802398] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    3.807411] [drm] Initialized
[    3.814703] Bluetooth: Core ver 2.22
[    3.814729] NET: Registered protocol family 31
[    3.814731] Bluetooth: HCI device and connection manager initialized
[    3.814737] Bluetooth: HCI socket layer initialized
[    3.814740] Bluetooth: L2CAP socket layer initialized
[    3.814748] Bluetooth: SCO socket layer initialized
[    3.843773] usbcore: registered new interface driver btusb
[    3.850687] input: PC Speaker as /devices/platform/pcspkr/input/input6
[    3.860201] Bluetooth: hci0: read Intel version: 370810011003110e00
[    3.862239] EFI Variables Facility v0.08 2004-May-17
[    3.877828] ACPI: Battery Slot [BAT1] (battery present)
[    3.896085] bluetooth hci0: firmware: direct-loading firmware intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
[    3.896441] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
[    3.904031] pstore: using zlib compression
[    3.904072] pstore: Registered efi as persistent store backend
[    3.933442] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    3.933446] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    3.933446] RAPL PMU: hw unit of domain package 2^-14 Joules
[    3.933447] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    3.933448] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    3.949771] media: Linux media interface: v0.10
[    3.956345] [drm] Memory usable by graphics device = 4096M
[    3.956350] checking generic (80000000 7f0000) vs hw (80000000 10000000)
[    3.956352] fb: switching to inteldrmfb from EFI VGA
[    3.956421] Console: switching to colour dummy device 80x25
[    3.957374] [drm] Replacing VGA console driver
[    3.958667] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.958669] [drm] Driver supports precise vblank timestamp query.
[    3.959823] i915 0000:00:02.0: firmware: failed to load i915/bxt_dmc_ver1_07.bin (-2)
[    3.959835] i915 0000:00:02.0: Direct firmware load for i915/bxt_dmc_ver1_07.bin failed with error -2
[    3.959839] i915 0000:00:02.0: Failed to load DMC firmware [https://01.org/linuxgraphics/intel-linux-graphics-firmwares], disabling runtime power management.
[    3.960878] Linux video capture interface: v2.00
[    3.960995] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    3.987665] Intel(R) Wireless WiFi driver for Linux
[    3.987668] Copyright(c) 2003- 2015 Intel Corporation
[    3.987835] iwlwifi 0000:02:00.0: enabling device (0000 -> 0002)
[    3.989927] iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-7265D-26.ucode (-2)                                                                                       
[    3.989938] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-26.ucode failed with error -2
[    3.989954] iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-7265D-25.ucode (-2)                                                                                       
[    3.989959] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-25.ucode failed with error -2
[    3.989971] iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-7265D-24.ucode (-2)                                                                                       
[    3.989975] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-24.ucode failed with error -2
[    3.989987] iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-7265D-23.ucode (-2)                                                                                       
[    3.989991] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-23.ucode failed with error -2
[    3.998381] uvcvideo: Found UVC 1.00 device EasyCamera (0bda:5627)
[    4.000074] uvcvideo 1-8:1.0: Entity type for entity Extension 4 was not initialized!
[    4.000082] uvcvideo 1-8:1.0: Entity type for entity Processing 2 was not initialized!
[    4.000084] uvcvideo 1-8:1.0: Entity type for entity Camera 1 was not initialized!
[    4.000264] input: EasyCamera as /devices/pci0000:00/0000:00:15.0/usb1/1-8/1-8:1.0/input/input7
[    4.000760] usbcore: registered new interface driver uvcvideo
[    4.000762] USB Video Class driver (1.1.1)
[    4.006551] iwlwifi 0000:02:00.0: firmware: direct-loading firmware iwlwifi-7265D-22.ucode
[    4.007248] iwlwifi 0000:02:00.0: loaded firmware version 22.391740.0 op_mode iwlmvm
[    4.021441] [drm] GuC firmware load skipped
[    4.044745] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    4.045000] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[    4.045241] snd_hda_intel 0000:00:0e.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    4.045253] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[    4.059666] fbcon: inteldrmfb (fb0) is primary device
[    4.071811] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 3165, REV=0x210
[    4.076378] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[    4.077216] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[    4.082848] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    4.082851] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    4.082853] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[    4.082854] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    4.082855] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    4.082857] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[    4.082859] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[    4.086947] intel_rapl: Found RAPL domain package
[    4.086952] intel_rapl: Found RAPL domain core
[    4.086958] intel_rapl: Found RAPL domain uncore
[    4.086964] intel_rapl: Found RAPL domain dram
[    4.138154] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:0e.0/sound/card0/input9
[    4.138904] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:0e.0/sound/card0/input10
[    4.138995] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:0e.0/sound/card0/input11
[    4.139132] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input12
[    4.139234] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input13
[    4.139330] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input14
[    4.160301] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    4.184542] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
[    4.230209] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[    4.291568] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[    4.295058] random: crng init done
[    4.295061] random: 7 urandom warning(s) missed due to ratelimiting
[    4.302830] input: ELAN060F:00 04F3:3081 Touchpad as /devices/pci0000:00/0000:00:16.2/i2c_designware.1/i2c-6/i2c-ELAN060F:00/0018:04F3:3081.0002/input/input15
[    4.303346] hid-multitouch 0018:04F3:3081.0002: input,hidraw1: I2C HID v1.00 Mouse [ELAN060F:00 04F3:3081] on i2c-ELAN060F:00
[    4.797184] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    4.797185] Bluetooth: BNEP filters: protocol multicast
[    4.797192] Bluetooth: BNEP socket layer initialized
[    5.047698] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[    5.049845] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[    5.050110] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[    5.117730] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[    5.117996] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[    5.145938] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[    5.157793] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[    5.158065] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[    5.225872] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[    5.226144] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[    5.234320] Console: switching to colour frame buffer device 240x67
[    5.254770] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[    5.264724] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    5.602444] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[    5.833965] [drm] RC6 on
[  103.258014] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[  103.265444] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[  103.272358] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[  108.782457] Bluetooth: RFCOMM TTY layer initialized
[  108.782476] Bluetooth: RFCOMM socket layer initialized
[  108.782485] Bluetooth: RFCOMM ver 1.11
[  119.571852] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[  120.893814] wlp2s0: authenticate with 94:fe:22:56:a1:2c
[  120.903561] wlp2s0: send auth to 94:fe:22:56:a1:2c (try 1/3)
[  120.906502] wlp2s0: authenticated
[  120.909585] wlp2s0: associate with 94:fe:22:56:a1:2c (try 1/3)
[  120.913877] wlp2s0: RX AssocResp from 94:fe:22:56:a1:2c (capab=0x411 status=0 aid=1)
[  120.914147] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 0), will use 2
[  120.915356] wlp2s0: associated
[  122.391891] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 1035.590117] perf: interrupt took too long (2538 > 2500), lowering kernel.perf_event_max_sample_rate to 78750
[ 1401.348004] perf: interrupt took too long (3207 > 3172), lowering kernel.perf_event_max_sample_rate to 62250
[ 2194.595847] perf: interrupt took too long (4040 > 4008), lowering kernel.perf_event_max_sample_rate to 49500
[ 3417.299654] perf: interrupt took too long (5070 > 5050), lowering kernel.perf_event_max_sample_rate to 39250
W Grub nie pamiętam. Klawiatura mi działa cała.
Jest jak widać ELAN:

Kod: Zaznacz cały

input: ELAN060F:00 04F3:3081 Touchpad as /devices/pci0000:00/0000:00:16.2/i2c_designware.1/i2c-6/i2c-ELAN060F:00/0018:04F3:3081.0002/input/input15
[    4.303346] hid-multitouch 0018:04F3:3081.0002: input,hidraw1: I2C HID v1.00 Mouse [ELAN060F:00 04F3:3081] on i2c-ELAN060F:00
[    4.797184] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Czy to jest u mnie sterownikami obsługiwane cz z jądra?

superserek
Posty: 31
Rejestracja: 12 marca 2019, 12:19

Re: touchpad nie jest wykrywany

Post autor: superserek » 19 marca 2019, 11:33

Zainstalowałem jajko 4.20, jednak to nic nie zmienia.

Awatar użytkownika
dedito
Moderator
Posty: 2877
Rejestracja: 18 listopada 2013, 21:07
Lokalizacja: Gliwice

Re: touchpad nie jest wykrywany

Post autor: dedito » 19 marca 2019, 11:48

Jest też jajko rozwojowe z linii 5

Awatar użytkownika
arturromarr
Beginner
Posty: 137
Rejestracja: 14 sierpnia 2015, 01:21

Re: touchpad nie jest wykrywany

Post autor: arturromarr » 19 marca 2019, 12:00

superserek, czyli mamy taki sam ten touchpad?

ODPOWIEDZ