Strona 1 z 2

External HDD - extremalnie dlugi czas ladowania danych.

: 12 sierpnia 2017, 22:27
autor: Matrixx
Witam.
Zaistnial problem z moim zewnetrznym HDD - 2TB.
Robilem remanenty, stworzylem nowa partycje z GPT.
Przenioslem ok 1TB danych, i do tej pory wszystko pieknie.
Chce skorzystac z danych.... a tu one pojawiaja sie po kilkunastu minutach ladowania. :mad:
Jezeli wejde w subfolder to folder nadrzedny ... znika, pojawia sie po kilku minutach.
Korzystanie z plikow multimedialnych - wykluczone w takiej sytuacji.
Fdisk znajduje dysk z partycja "sdb1" po kilku minutach.
http://imgur.com/a/iW3EY
Co sie dzieje?

Re: External HDD - extremalnie dlugi czas ladowania danych.

: 12 sierpnia 2017, 22:40
autor: dedito
Pokaż tablicę SMART.

Re: External HDD - extremalnie dlugi czas ladowania danych.

: 13 sierpnia 2017, 11:21
autor: Matrixx

Kod: Zaznacz cały

smartctl -a /dev/sdb
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.8.0-59-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     SAMSUNG SpinPoint F4 EG (AF)
Device Model:     SAMSUNG HD204UI
Serial Number:    S2H7J1AB114610
LU WWN Device Id: 5 0024e9 004919e57
Firmware Version: 1AQ10001
User Capacity:    2,000,398,934,016 bytes [2.00 TB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    5400 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 6
SATA Version is:  SATA 2.6, 3.0 Gb/s
Local Time is:    Sun Aug 13 10:04:28 2017 IST

==> WARNING: Using smartmontools or hdparm with this
drive may result in data loss due to a firmware bug.
****** THIS DRIVE MAY OR MAY NOT BE AFFECTED! ******
Buggy and fixed firmware report same version number!
See the following web pages for details:
http://knowledge.seagate.com/articles/en_US/FAQ/223571en
http://www.smartmontools.org/wiki/SamsungF4EGBadBlocks

SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      ( 249)	Self-test routine in progress...
					90% of test remaining.
Total time to complete Offline 
data collection: 		(21180) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 353) minutes.
SCT capabilities: 	       (0x003f)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   100   100   051    Pre-fail  Always       -       17840
  2 Throughput_Performance  0x0026   252   252   000    Old_age   Always       -       0
  3 Spin_Up_Time            0x0023   067   065   025    Pre-fail  Always       -       10155
  4 Start_Stop_Count        0x0032   099   099   000    Old_age   Always       -       1366
  5 Reallocated_Sector_Ct   0x0033   252   252   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   252   252   051    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0024   252   252   015    Old_age   Offline      -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       2300
 10 Spin_Retry_Count        0x0032   252   252   051    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   252   252   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       1206
181 Program_Fail_Cnt_Total  0x0022   100   100   000    Old_age   Always       -       2
191 G-Sense_Error_Rate      0x0022   097   097   000    Old_age   Always       -       35020
192 Power-Off_Retract_Count 0x0022   252   252   000    Old_age   Always       -       0
194 Temperature_Celsius     0x0002   064   056   000    Old_age   Always       -       28 (Min/Max 10/44)
195 Hardware_ECC_Recovered  0x003a   100   100   000    Old_age   Always       -       0
196 Reallocated_Event_Count 0x0032   252   252   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   100   100   000    Old_age   Always       -       23
198 Offline_Uncorrectable   0x0030   252   252   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0036   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x002a   100   100   000    Old_age   Always       -       1
223 Load_Retry_Count        0x0032   252   252   000    Old_age   Always       -       0
225 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       1387

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Self_test_in_progress [90% left] (0-65535)
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Dodatkowo, error log:

Kod: Zaznacz cały

sudo smartctl --log=selftest /dev/sdb
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.8.0-59-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF READ SMART DATA SECTION ===
SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed: read failure       70%      2300         360712192
Do momentu "remanentu" nie mialem z tym dyskiem zadnych klopotow.
Tak dysk jest prezentowany przez gnome-dysk: http://imgur.com/a/vsYUS
Komunikaty bledow:
- http://imgur.com/a/GUcEc
- http://imgur.com/a/GxEAB

Re: External HDD - extremalnie dlugi czas ladowania danych.

: 13 sierpnia 2017, 13:18
autor: dedito
Wysokie 191 (wstrząsy, upadki, przeciążenia) i być może przez to wysokie 01 (problemy z odczytem z powodów uszkodzeń talerza, głowic, mechniki).
Podepnij pod inny komputer, jak na innym będzie to samo to wg mnie dysk nadaje się na gwarancje/rękojmie lub jak już nie ma to do utylizacji.

Re: External HDD - extremalnie dlugi czas ladowania danych.

: 13 sierpnia 2017, 13:39
autor: Morfik
Rozkręcanie talerzy trwa 10s, a to nie jest normalne.

Poza tym, ten dysk ma badbloki: Current_Pending_Sector 23 . Trzeba by te sektory zapisać via hdparm i przeprowadzić pełny skan dysku. Jak kolejne sektory się pojawią, to przydałoby się ocenić jakość powierzchni przez zerowanie całego dysku. Jeśli w trakcie tego zabiegu badów przybędzie, to dysk do wyrzucenia.

Re: External HDD - extremalnie dlugi czas ladowania danych.

: 13 sierpnia 2017, 23:13
autor: Matrixx
Zrobilem dlugi test.
Mielilo prawie 6 godz.
Wynik:

Kod: Zaznacz cały

=== START OF READ SMART DATA SECTION ===

SMART overall-health self-assessment test result: PASSED
:confused:

Re: External HDD - extremalnie dlugi czas ladowania danych.

: 13 sierpnia 2017, 23:45
autor: Morfik
Pokaż raport po teście.

Re: External HDD - extremalnie dlugi czas ladowania danych.

: 14 sierpnia 2017, 16:24
autor: Matrixx

Kod: Zaznacz cały

sudo smartctl -H /dev/sdb
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.8.0-59-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

sudo smartctl -l selftest /dev/sdb
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.8.0-59-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF READ SMART DATA SECTION ===
SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed: read failure       90%      2312         360712192
# 2  Extended offline    Aborted by host               90%      2312         -
# 3  Extended offline    Interrupted (host reset)      90%      2300         -
# 4  Short offline       Completed: read failure       70%      2300         360712192
Dodatkowo "GSmartcontrol" :
- http://imgur.com/a/6ozUa
- http://imgur.com/a/dbjrl

Nic z tego nie rozumiem.
Przechodzi "test zdrowia' z wynikiem PASSED, a w dlugim tescie stan przedzawalowy po 2300 godz pracy (ok 25%) i bez zadnych upadkow i innych w przeszlosci. :confused:

Re: External HDD - extremalnie dlugi czas ladowania danych.

: 14 sierpnia 2017, 16:44
autor: dedito
Testy nie wykonały się w 100% na co wskazuje kolumna Remaing w smartcl, Completed w GSmartcontrol, pokazany jest też powód zakończenia testu w kolumnie Status (read failure).
Jak to zerowanie nie pomoże to pozostaje wykorzystać gwarancję lub rękojmię jeśli jest mniej niż dwa lata od zakupu.

Re: External HDD - extremalnie dlugi czas ladowania danych.

: 14 sierpnia 2017, 18:06
autor: Matrixx
Za pozno ponad 2 lata.
Jednej rzeczy nie rozumiem, problem zaczol sie jak napisalem:
Robilem remanenty, stworzylem nowa partycje z GPT.
Do remanentu dysk dzialal perfect, problemy zaczely sie po stworzeniu partycji GPT.
Czy stworzenie partycji moze stac sie przyczyna klopotow?