Niestety posiadam laptopa z technologią Optimus. Chciałbym zainstalować do niego sterowniki graficzne pod Debianem. Chciałbym też, aby sterowniki miały "przełącznik" - tzn jakiś aktywator na panelu, albo mały programik, który umożliwia zmianę karty graficznej z wydajnej na energooszczędną. Czy Bumblebee albo Ironhide mają taką opcje? I czy istnieje łopatologiczna instrukcja w języku polskim jak zainstalować któryś z tych sterowników pod Debianem (mało znam ten system).
Pozdrawiam
Darken
Edycja:
Informacje o systemie:
Kod: Zaznacz cały
darken@debian:~$ uname -a
Linux debian 3.2.0-0.bpo.2-amd64 #1 SMP Sat Jun 30 09:14:31 UTC 2012 x86_64 GNU/LinuxKod: Zaznacz cały
darken@debian:~$ lspci -n
00:00.0 0600: 8086:0104 (rev 09)
00:01.0 0604: 8086:0101 (rev 09)
00:02.0 0300: 8086:0116 (rev 09)
00:16.0 0780: 8086:1c3a (rev 04)
00:1a.0 0c03: 8086:1c2d (rev 04)
00:1b.0 0403: 8086:1c20 (rev 04)
00:1c.0 0604: 8086:1c10 (rev b4)
00:1c.3 0604: 8086:1c16 (rev b4)
00:1d.0 0c03: 8086:1c26 (rev 04)
00:1f.0 0601: 8086:1c49 (rev 04)
00:1f.2 0106: 8086:1c03 (rev 04)
00:1f.3 0c05: 8086:1c22 (rev 04)
01:00.0 0302: 10de:1051 (rev a1)
02:00.0 0280: 8086:0896 (rev 34)
03:00.0 0200: 10ec:8168 (rev 06)
Kod: Zaznacz cały
root@debian:/home/darken# cat /var/log/Xorg.0.log
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-5-amd64 i686 Debian
Current Operating System: Linux debian 3.2.0-0.bpo.2-amd64 #1 SMP Sat Jun 30 09:14:31 UTC 2012 x86_64
Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-0.bpo.2-amd64 root=UUID=78ac5d3c-b421-4162-884b-633ca5c4c5ea ro quiet
Build Date: 30 October 2011 08:56:49PM
xorg-server 2:1.7.7-14 (Julien Cristau <jcristau@debian.org>)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug 24 14:29:44 2012
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor "<default monitor>"
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType".
Entry deleted from font path.
(Run 'mkfontdir' on "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType").
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x81ecce0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) using VT number 7
(--) PCI:*(0:0:2:0) 8086:0116:144d:c0b6 Intel Corporation Sandy Bridge Integrated Graphics Controller rev 9, Mem @ 0xe1000000/4194304, 0xd0000000/268435456, I/O @ 0x00004000/64
(--) PCI: (0:1:0:0) 10de:1051:144d:c0b6 nVidia Corporation rev 161, Mem @ 0xe0000000/16777216, 0xb0000000/268435456, 0xc0000000/33554432, I/O @ 0x00003000/128
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(==) Matched intel as autoconfigured driver 0
(==) Matched vesa as autoconfigured driver 1
(==) Matched fbdev as autoconfigured driver 2
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 2.13.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 2.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 0.4.2
ABI class: X.Org Video Driver, version 6.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
Sandybridge, Sandybridge
(II) VESA: driver for VESA chipsets: vesa
(II) FBDEV: driver for framebuffer: fbdev
(II) Primary Device is: PCI 00@00:02:0
(WW) Falling back to old probe method for vesa
(WW) Falling back to old probe method for fbdev
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 0.0.2
ABI class: X.Org Video Driver, version 6.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge
(--) intel(0): Chipset: "Sandybridge"
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait disabled
(==) intel(0): video overlay key set to 0x101fe
(II) intel(0): Output LVDS1 has no monitor section
(II) intel(0): found backlight control interface /sys/class/backlight/acpi_video1
(II) intel(0): Output VGA1 has no monitor section
(II) intel(0): Output HDMI1 has no monitor section
(II) intel(0): Output DP1 has no monitor section
(II) intel(0): EDID for output LVDS1
(II) intel(0): Manufacturer: SEC Model: 324a Serial#: 0
(II) intel(0): Year: 2011 Week: 0
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 19
(II) intel(0): Gamma: 2.20
(II) intel(0): No DPMS capabilities specified
(II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.570 redY: 0.340 greenX: 0.330 greenY: 0.560
(II) intel(0): blueX: 0.160 blueY: 0.135 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 70.7 MHz Image Size: 344 x 194 mm
(II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1486 h_border: 0
(II) intel(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 792 v_border: 0
(II) intel(0): Unknown vendor-specific block f
(II) intel(0): SAMSUNG
(II) intel(0): LTN156AT190
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff004ca34a3200000000
(II) intel(0): 00150103802213780a09259257548f29
(II) intel(0): 22505400000001010101010101010101
(II) intel(0): 0101010101019e1b5678500018303020
(II) intel(0): 250058c2100000190000000f00000000
(II) intel(0): 00000000002387026401000000fe0053
(II) intel(0): 414d53554e470a2020202020000000fe
(II) intel(0): 004c544e31353641543139300a2000b4
(II) intel(0): EDID vendor "SEC", prod id 12874
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1366x768"x0.0 70.70 1366 1414 1446 1486 768 770 775 792 -hsync -vsync (47.6 kHz)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
(II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Printing probed modes for output LVDS1
(II) intel(0): Modeline "1366x768"x60.1 70.70 1366 1414 1446 1486 768 770 775 792 -hsync -vsync (47.6 kHz)
(II) intel(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz)
(II) intel(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): EDID for output VGA1
(II) intel(0): EDID for output HDMI1
(II) intel(0): EDID for output DP1
(II) intel(0): Output LVDS1 connected
(II) intel(0): Output VGA1 disconnected
(II) intel(0): Output HDMI1 disconnected
(II) intel(0): Output DP1 disconnected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS1 using initial mode 1366x768
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(II) intel(0): Kernel page flipping support detected, enabling
(**) intel(0): Display dimensions: (340, 190) mm
(**) intel(0): DPI set to (102, 102)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) UnloadModule: "fbdev"
(II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) UnloadModule: "fbdevhw"
(II) Unloading /usr/lib/xorg/modules/linux/libfbdevhw.so
(==) Depth 24 pixmap format is 32 bpp
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): [DRI2] Setup complete
(II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(II) put_image
(II) get_image
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder enabled
(II) intel(0): Set up textured video
(II) intel(0): [XvMC] i965_xvmc driver initialized.
(II) intel(0): direct rendering: DRI2 Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 361 x 203
(II) config/udev: Adding input device Power Button (/dev/input/event5)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event5"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "pl"
(II) config/udev: Adding input device Video Bus (/dev/input/event13)
(**) Video Bus: Applying InputClass "evdev keyboard catchall"
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event13"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "pl"
(II) config/udev: Adding input device Video Bus (/dev/input/event12)
(**) Video Bus: Applying InputClass "evdev keyboard catchall"
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event12"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "pl"
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "pl"
(II) config/udev: Adding input device Lid Switch (/dev/input/event3)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device WebCam SCB-1100N (/dev/input/event8)
(**) WebCam SCB-1100N: Applying InputClass "evdev keyboard catchall"
(**) WebCam SCB-1100N: always reports core events
(**) WebCam SCB-1100N: Device: "/dev/input/event8"
(II) WebCam SCB-1100N: Found keys
(II) WebCam SCB-1100N: Configuring as keyboard
(II) XINPUT: Adding extended input device "WebCam SCB-1100N" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "pl"
(II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event10)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event9)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device A4TECH USB Device (/dev/input/event1)
(**) A4TECH USB Device: Applying InputClass "evdev keyboard catchall"
(**) A4TECH USB Device: always reports core events
(**) A4TECH USB Device: Device: "/dev/input/event1"
(II) A4TECH USB Device: Found 1 mouse buttons
(II) A4TECH USB Device: Found scroll wheel(s)
(II) A4TECH USB Device: Found relative axes
(II) A4TECH USB Device: Found absolute axes
(II) A4TECH USB Device: Found x and y absolute axes
(II) A4TECH USB Device: Found keys
(II) A4TECH USB Device: Configuring as mouse
(II) A4TECH USB Device: Configuring as keyboard
(**) A4TECH USB Device: YAxisMapping: buttons 4 and 5
(**) A4TECH USB Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "A4TECH USB Device" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "pl"
(EE) A4TECH USB Device: failed to initialize for relative axes.
(WW) Device 'A4TECH USB Device' has 37 axes, only using first 36.
(II) A4TECH USB Device: initialized for absolute axes.
(II) config/udev: Adding input device A4TECH USB Device (/dev/input/js0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device A4TECH USB Device (/dev/input/event2)
(**) A4TECH USB Device: Applying InputClass "evdev pointer catchall"
(**) A4TECH USB Device: always reports core events
(**) A4TECH USB Device: Device: "/dev/input/event2"
(II) A4TECH USB Device: Found 20 mouse buttons
(II) A4TECH USB Device: Found scroll wheel(s)
(II) A4TECH USB Device: Found relative axes
(II) A4TECH USB Device: Found x and y relative axes
(II) A4TECH USB Device: Configuring as mouse
(**) A4TECH USB Device: YAxisMapping: buttons 4 and 5
(**) A4TECH USB Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "A4TECH USB Device" (type: MOUSE)
(II) A4TECH USB Device: initialized for relative axes.
(II) config/udev: Adding input device A4TECH USB Device (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "pl"
(II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event7)
(**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
(**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(II) Synaptics touchpad driver version 1.2.2
(**) Option "Device" "/dev/input/event7"
(II) ETPS/2 Elantech Touchpad: x-axis range 0 - 2940
(II) ETPS/2 Elantech Touchpad: y-axis range 0 - 1400
(II) ETPS/2 Elantech Touchpad: pressure range 0 - 255
(II) ETPS/2 Elantech Touchpad: finger width range 0 - 15
(II) ETPS/2 Elantech Touchpad: buttons: left right double triple
(--) ETPS/2 Elantech Touchpad: touchpad found
(**) ETPS/2 Elantech Touchpad: always reports core events
(II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD)
(**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
(**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 0
(**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
(**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
(--) ETPS/2 Elantech Touchpad: touchpad found
(II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
(**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
(II) Synaptics touchpad driver version 1.2.2
ETPS/2 Elantech Touchpad no synaptics event device found
(**) Option "Device" "/dev/input/mouse1"
Query no Synaptics: 6003C8
(--) ETPS/2 Elantech Touchpad: no supported touchpad found
(EE) ETPS/2 Elantech Touchpad Unable to query/initialize Synaptics hardware.
(EE) PreInit failed for input device "ETPS/2 Elantech Touchpad"
(II) UnloadModule: "synaptics"
(II) config/udev: Adding input device PC Speaker (/dev/input/event6)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event14)
(**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
(**) ACPI Virtual Keyboard Device: always reports core events
(**) ACPI Virtual Keyboard Device: Device: "/dev/input/event14"
(II) ACPI Virtual Keyboard Device: Found keys
(II) ACPI Virtual Keyboard Device: Configuring as keyboard
(II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "pl"
(II) intel(0): EDID vendor "SEC", prod id 12874
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1366x768"x0.0 70.70 1366 1414 1446 1486 768 770 775 792 -hsync -vsync (47.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 12874
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1366x768"x0.0 70.70 1366 1414 1446 1486 768 770 775 792 -hsync -vsync (47.6 kHz)