Prosze pomozcie! nie chce z tego powodu wracac na windowsa. jakis czas temu kupilem kompa a wtedy nie myslalem w ogole o linuxie i kupilem karte amd ;/
uname -a
Kod: Zaznacz cały
paoz@decom:~$ uname -a
Linux decom 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt11-1+deb8u6 (2015-11-09) x86_64 GNU/Linux
dpkg --print-architecture
Kod: Zaznacz cały
paoz@decom:~$ dpkg --print-architecture
amd64
Kod: Zaznacz cały
paoz@decom:~$ lspci -k
00:00.0 Host bridge: Intel Corporation 4th Gen Core Processor DRAM Controller (rev 06)
Subsystem: ASRock Incorporation Device 0c00
Kernel driver in use: hsw_uncore
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06)
Kernel driver in use: pcieport
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05)
Subsystem: ASRock Incorporation Device 8c31
Kernel driver in use: xhci_hcd
00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
Subsystem: ASRock Incorporation Device 8c3a
Kernel driver in use: mei_me
00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 05)
Subsystem: ASRock Incorporation Device 8c2d
Kernel driver in use: ehci-pci
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)
Subsystem: ASRock Incorporation Device 8892
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d5)
Kernel driver in use: pcieport
00:1c.2 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d5)
00:1c.3 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #4 (rev d5)
Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 05)
Subsystem: ASRock Incorporation Device 8c26
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge: Intel Corporation C220 Series Chipset Family H81 Express LPC Controller (rev 05)
Subsystem: ASRock Incorporation Device 8c5c
Kernel driver in use: lpc_ich
00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05)
Subsystem: ASRock Incorporation Device 8c02
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 05)
Subsystem: ASRock Incorporation Device 8c22
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Tahiti XT [Radeon HD 7970/8970 OEM / R9 280X]
Subsystem: XFX Pine Group Inc. Device 3001
Kernel driver in use: fglrx_pci
01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Tahiti XT HDMI Audio [Radeon HD 7970 Series]
Subsystem: XFX Pine Group Inc. Device aaa0
Kernel driver in use: snd_hda_intel
02:00.0 USB controller: Etron Technology, Inc. EJ168 USB 3.0 Host Controller (rev 01)
Subsystem: ASRock Incorporation Device 7023
Kernel driver in use: xhci_hcd
03:00.0 PCI bridge: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge (rev 03)
05:00.0 Ethernet controller: Qualcomm Atheros QCA8171 Gigabit Ethernet (rev 10)
Subsystem: ASRock Incorporation Device 10a1
Kernel driver in use: alx
Kod: Zaznacz cały
paoz@decom:~$ lspci -n
00:00.0 0600: 8086:0c00 (rev 06)
00:01.0 0604: 8086:0c01 (rev 06)
00:14.0 0c03: 8086:8c31 (rev 05)
00:16.0 0780: 8086:8c3a (rev 04)
00:1a.0 0c03: 8086:8c2d (rev 05)
00:1b.0 0403: 8086:8c20 (rev 05)
00:1c.0 0604: 8086:8c10 (rev d5)
00:1c.2 0604: 8086:244e (rev d5)
00:1c.3 0604: 8086:8c16 (rev d5)
00:1d.0 0c03: 8086:8c26 (rev 05)
00:1f.0 0601: 8086:8c5c (rev 05)
00:1f.2 0106: 8086:8c02 (rev 05)
00:1f.3 0c05: 8086:8c22 (rev 05)
01:00.0 0300: 1002:6798
01:00.1 0403: 1002:aaa0
02:00.0 0c03: 1b6f:7023 (rev 01)
03:00.0 0604: 1b21:1080 (rev 03)
05:00.0 0200: 1969:10a1 (rev 10)
log /var/log/Xorg.0.log
Kod: Zaznacz cały
paoz@decom:~$ cat /var/log/Xorg.0.log
[ 11.449]
X.Org X Server 1.16.4
Release Date: 2014-12-20
[ 11.449] X Protocol Version 11, Revision 0
[ 11.449] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[ 11.449] Current Operating System: Linux decom 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt11-1+deb8u6 (2015-11-09) x86_64
[ 11.449] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=7a0a1766-422b-487a-ae7c-f3db8d1c0087 ro quiet
[ 11.449] Build Date: 11 February 2015 12:32:02AM
[ 11.449] xorg-server 2:1.16.4-1 (http://www.debian.org/support)
[ 11.449] Current version of pixman: 0.32.6
[ 11.449] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 11.449] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 11.449] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 17 01:15:30 2015
[ 11.471] (==) Using config file: "/etc/X11/xorg.conf"
[ 11.471] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 11.520] (==) ServerLayout "aticonfig Layout"
[ 11.520] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 11.520] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 11.536] (**) | |-->Device "aticonfig-Device[0]-0"
[ 11.536] (==) Automatically adding devices
[ 11.536] (==) Automatically enabling devices
[ 11.536] (==) Automatically adding GPU devices
[ 11.584] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 11.584] Entry deleted from font path.
[ 11.630] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 11.630] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 11.630] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 11.643] (II) Loader magic: 0x7fb421305d80
[ 11.643] (II) Module ABI versions:
[ 11.643] X.Org ANSI C Emulation: 0.4
[ 11.643] X.Org Video Driver: 18.0
[ 11.643] X.Org XInput driver : 21.0
[ 11.643] X.Org Server Extension : 8.0
[ 11.644] (--) PCI:*(0:1:0:0) 1002:6798:1682:3001 rev 0, Mem @ 0xe0000000/268435456, 0xf0000000/262144, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[ 11.644] (II) "glx" will be loaded by default.
[ 11.644] (II) LoadModule: "glx"
[ 11.659] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[ 11.675] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 11.675] compiled for 6.9.0, module version = 1.0.0
[ 11.675] (II) LoadModule: "fglrx"
[ 11.676] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 11.784] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 11.784] compiled for 1.4.99.906, module version = 14.20.7
[ 11.784] Module class: X.Org Video Driver
[ 11.786] (II) Loading sub module "fglrxdrm"
[ 11.786] (II) LoadModule: "fglrxdrm"
[ 11.786] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 11.798] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 11.798] compiled for 1.4.99.906, module version = 14.20.7
[ 11.798] (II) AMD Proprietary Linux Driver Version Identifier:14.20.7
[ 11.798] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-14.201.1006.1002
[ 11.798] (II) AMD Proprietary Linux Driver Build Date: Sep 2 2014 10:14:55
[ 11.798] (++) using VT number 7
[ 11.803] (WW) Falling back to old probe method for fglrx
[ 11.877] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[ 11.878] ukiDynamicMajor: found major device number 251
[ 11.878] ukiDynamicMajor: found major device number 251
[ 11.878] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 11.878] ukiOpenDevice: node name is /dev/ati/card0
[ 11.878] ukiOpenDevice: open result is 9, (OK)
[ 12.198] ukiOpenByBusid: ukiOpenMinor returns 9
[ 12.198] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 12.221] (--) Chipset Supported AMD Graphics Processor (0x6798) found
[ 12.237] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 12.238] (II) fglrx(0): pEnt->device->identifier=0x7fb422735510
[ 12.238] (II) fglrx(0): === [xdl_xs116_atiddxPreInit] === begin
[ 12.238] (II) Loading sub module "vgahw"
[ 12.238] (II) LoadModule: "vgahw"
[ 12.238] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 12.247] (II) Module vgahw: vendor="X.Org Foundation"
[ 12.247] compiled for 1.16.4, module version = 0.1.0
[ 12.247] ABI class: X.Org Video Driver, version 18.0
[ 12.247] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 12.247] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 12.247] (==) fglrx(0): Default visual is TrueColor
[ 12.247] (**) fglrx(0): Option "DPMS" "true"
[ 12.247] (==) fglrx(0): RGB weight 888
[ 12.247] (II) fglrx(0): Using 8 bits per RGB
[ 12.247] (==) fglrx(0): Buffer Tiling is ON
[ 12.247] (II) Loading sub module "fglrxdrm"
[ 12.247] (II) LoadModule: "fglrxdrm"
[ 12.247] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 12.247] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 12.247] compiled for 1.4.99.906, module version = 14.20.7
[ 12.248] ukiDynamicMajor: found major device number 251
[ 12.248] ukiDynamicMajor: found major device number 251
[ 12.248] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 12.248] ukiOpenDevice: node name is /dev/ati/card0
[ 12.248] ukiOpenDevice: open result is 11, (OK)
[ 12.248] ukiOpenByBusid: ukiOpenMinor returns 11
[ 12.248] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 12.248] (**) fglrx(0): NoAccel = NO
[ 12.248] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[ 12.248] (--) fglrx(0): Chipset: "AMD Radeon HD 7900 Series" (Chipset = 0x6798)
[ 12.248] (--) fglrx(0): (PciSubVendor = 0x1682, PciSubDevice = 0x3001)
[ 12.248] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[ 12.248] (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
[ 12.248] (--) fglrx(0): MMIO registers at 0xf0000000
[ 12.248] (--) fglrx(0): I/O port at 0x0000e000
[ 12.248] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 12.257] (II) fglrx(0): AC Adapter is used
[ 12.264] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 12.333] (II) Loading sub module "vbe"
[ 12.333] (II) LoadModule: "vbe"
[ 12.333] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 12.335] (II) Module vbe: vendor="X.Org Foundation"
[ 12.335] compiled for 1.16.4, module version = 1.1.0
[ 12.335] ABI class: X.Org Video Driver, version 18.0
[ 12.336] (II) fglrx(0): VESA BIOS detected
[ 12.336] (II) fglrx(0): VESA VBE Version 3.0
[ 12.336] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 12.336] (II) fglrx(0): VESA VBE OEM: AMD ATOMBIOS
[ 12.336] (II) fglrx(0): VESA VBE OEM Software Rev: 15.43
[ 12.336] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2010, Advanced Micro Devices, Inc.
[ 12.336] (II) fglrx(0): VESA VBE OEM Product: W81
[ 12.336] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 12.336] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 12.336] (--) fglrx(0): Video RAM: 3145728 kByte, Type: GDDR5
[ 12.336] (II) fglrx(0): PCIE card detected
[ 12.336] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 12.336] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 12.336] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf400000000, MCFBSize = 0xc0000000)
[ 12.336] (II) fglrx(0): RandR 1.2 support is enabled!
[ 12.336] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 12.336] (II) Loading sub module "fb"
[ 12.336] (II) LoadModule: "fb"
[ 12.336] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 12.349] (II) Module fb: vendor="X.Org Foundation"
[ 12.349] compiled for 1.16.4, module version = 1.0.0
[ 12.349] ABI class: X.Org ANSI C Emulation, version 0.4
[ 12.349] (II) fglrx(0): EDID Management option: EDID Management is enabled
[ 12.349] (II) Loading sub module "ddc"
[ 12.349] (II) LoadModule: "ddc"
[ 12.349] (II) Module "ddc" already built-in
[ 12.490] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
[ 12.490] (II) fglrx(0): Output DFP2 has no monitor section
[ 12.490] (II) fglrx(0): Output DFP3 has no monitor section
[ 12.490] (II) fglrx(0): Output DFP4 has no monitor section
[ 12.490] (II) fglrx(0): Output DFP5 has no monitor section
[ 12.490] (II) fglrx(0): Output DFP6 has no monitor section
[ 12.490] (II) fglrx(0): Output DFP7 has no monitor section
[ 12.490] (II) fglrx(0): Output DFP8 has no monitor section
[ 12.490] (II) fglrx(0): Output DFP9 has no monitor section
[ 12.490] (II) fglrx(0): Output DFP10 has no monitor section
[ 12.490] (II) fglrx(0): Output DFP11 has no monitor section
[ 12.490] (II) fglrx(0): Output CRT1 has no monitor section
[ 12.490] (II) Loading sub module "ddc"
[ 12.490] (II) LoadModule: "ddc"
[ 12.490] (II) Module "ddc" already built-in
[ 12.490] (II) fglrx(0): Connected Display0: CRT1
[ 12.490] (II) fglrx(0): Display0 EDID data ---------------------------
[ 12.490] (II) fglrx(0): Manufacturer: SAM Model: 428 Serial#: 1297691186
[ 12.490] (II) fglrx(0): Year: 2008 Week: 42
[ 12.490] (II) fglrx(0): EDID Version: 1.3
[ 12.490] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 12.490] (II) fglrx(0): Sync: Separate Composite SyncOnGreen
[ 12.490] (II) fglrx(0): Max Image Size [cm]: horiz.: 46 vert.: 30
[ 12.490] (II) fglrx(0): Gamma: 2.20
[ 12.490] (II) fglrx(0): DPMS capabilities: Off; RGB/Color Display
[ 12.490] (II) fglrx(0): First detailed timing is preferred mode
[ 12.490] (II) fglrx(0): redX: 0.655 redY: 0.329 greenX: 0.276 greenY: 0.617
[ 12.490] (II) fglrx(0): blueX: 0.144 blueY: 0.088 whiteX: 0.312 whiteY: 0.329
[ 12.490] (II) fglrx(0): Supported established timings:
[ 12.490] (II) fglrx(0): 720x400@70Hz
[ 12.490] (II) fglrx(0): 640x480@60Hz
[ 12.490] (II) fglrx(0): 640x480@67Hz
[ 12.490] (II) fglrx(0): 640x480@72Hz
[ 12.490] (II) fglrx(0): 640x480@75Hz
[ 12.490] (II) fglrx(0): 800x600@56Hz
[ 12.490] (II) fglrx(0): 800x600@60Hz
[ 12.490] (II) fglrx(0): 800x600@72Hz
[ 12.490] (II) fglrx(0): 800x600@75Hz
[ 12.490] (II) fglrx(0): 832x624@75Hz
[ 12.490] (II) fglrx(0): 1024x768@60Hz
[ 12.490] (II) fglrx(0): 1024x768@70Hz
[ 12.490] (II) fglrx(0): 1024x768@75Hz
[ 12.490] (II) fglrx(0): 1280x1024@75Hz
[ 12.490] (II) fglrx(0): 1152x864@75Hz
[ 12.490] (II) fglrx(0): Manufacturer's mask: 0
[ 12.490] (II) fglrx(0): Supported standard timings:
[ 12.490] (II) fglrx(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 12.490] (II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 12.490] (II) fglrx(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 12.490] (II) fglrx(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 12.490] (II) fglrx(0): Supported detailed timing:
[ 12.490] (II) fglrx(0): clock: 119.0 MHz Image Size: 459 x 296 mm
[ 12.490] (II) fglrx(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
[ 12.490] (II) fglrx(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
[ 12.490] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 145 MHz
[ 12.490] (II) fglrx(0): Monitor name: SyncMaster
[ 12.490] (II) fglrx(0): Serial No: HMDQA05699
[ 12.490] (II) fglrx(0): EDID (in hex):
[ 12.490] (II) fglrx(0): 00ffffffffffff004c2d28043232594d
[ 12.490] (II) fglrx(0): 2a1201030e2e1e782adce1a754469e24
[ 12.490] (II) fglrx(0): 165054bfef80b30081808140714f0101
[ 12.490] (II) fglrx(0): 0101010101017c2e90a0601a1e403020
[ 12.490] (II) fglrx(0): 3600cb281100001a000000fd00384b1e
[ 12.490] (II) fglrx(0): 510e000a202020202020000000fc0053
[ 12.490] (II) fglrx(0): 796e634d61737465720a2020000000ff
[ 12.490] (II) fglrx(0): 00484d44514130353639390a20200009
[ 12.490] (II) fglrx(0): End of Display0 EDID data --------------------
[ 12.490] (II) fglrx(0): Dynamic Surface Resizing Enabled
[ 12.491] (II) fglrx(0): EDID for output DFP1
[ 12.491] (II) fglrx(0): EDID for output DFP2
[ 12.491] (II) fglrx(0): EDID for output DFP3
[ 12.491] (II) fglrx(0): EDID for output DFP4
[ 12.491] (II) fglrx(0): EDID for output DFP5
[ 12.491] (II) fglrx(0): EDID for output DFP6
[ 12.491] (II) fglrx(0): EDID for output DFP7
[ 12.491] (II) fglrx(0): EDID for output DFP8
[ 12.491] (II) fglrx(0): EDID for output DFP9
[ 12.491] (II) fglrx(0): EDID for output DFP10
[ 12.491] (II) fglrx(0): EDID for output DFP11
[ 12.491] (II) fglrx(0): EDID for output CRT1
[ 12.491] (II) fglrx(0): Manufacturer: SAM Model: 428 Serial#: 1297691186
[ 12.491] (II) fglrx(0): Year: 2008 Week: 42
[ 12.491] (II) fglrx(0): EDID Version: 1.3
[ 12.491] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 12.491] (II) fglrx(0): Sync: Separate Composite SyncOnGreen
[ 12.491] (II) fglrx(0): Max Image Size [cm]: horiz.: 46 vert.: 30
[ 12.491] (II) fglrx(0): Gamma: 2.20
[ 12.491] (II) fglrx(0): DPMS capabilities: Off; RGB/Color Display
[ 12.491] (II) fglrx(0): First detailed timing is preferred mode
[ 12.491] (II) fglrx(0): redX: 0.655 redY: 0.329 greenX: 0.276 greenY: 0.617
[ 12.491] (II) fglrx(0): blueX: 0.144 blueY: 0.088 whiteX: 0.312 whiteY: 0.329
[ 12.491] (II) fglrx(0): Supported established timings:
[ 12.491] (II) fglrx(0): 720x400@70Hz
[ 12.491] (II) fglrx(0): 640x480@60Hz
[ 12.491] (II) fglrx(0): 640x480@67Hz
[ 12.491] (II) fglrx(0): 640x480@72Hz
[ 12.491] (II) fglrx(0): 640x480@75Hz
[ 12.491] (II) fglrx(0): 800x600@56Hz
[ 12.491] (II) fglrx(0): 800x600@60Hz
[ 12.491] (II) fglrx(0): 800x600@72Hz
[ 12.491] (II) fglrx(0): 800x600@75Hz
[ 12.491] (II) fglrx(0): 832x624@75Hz
[ 12.491] (II) fglrx(0): 1024x768@60Hz
[ 12.491] (II) fglrx(0): 1024x768@70Hz
[ 12.491] (II) fglrx(0): 1024x768@75Hz
[ 12.491] (II) fglrx(0): 1280x1024@75Hz
[ 12.491] (II) fglrx(0): 1152x864@75Hz
[ 12.491] (II) fglrx(0): Manufacturer's mask: 0
[ 12.491] (II) fglrx(0): Supported standard timings:
[ 12.491] (II) fglrx(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 12.491] (II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 12.491] (II) fglrx(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 12.491] (II) fglrx(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 12.491] (II) fglrx(0): Supported detailed timing:
[ 12.491] (II) fglrx(0): clock: 119.0 MHz Image Size: 459 x 296 mm
[ 12.491] (II) fglrx(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
[ 12.491] (II) fglrx(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
[ 12.491] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 145 MHz
[ 12.491] (II) fglrx(0): Monitor name: SyncMaster
[ 12.491] (II) fglrx(0): Serial No: HMDQA05699
[ 12.491] (II) fglrx(0): EDID (in hex):
[ 12.491] (II) fglrx(0): 00ffffffffffff004c2d28043232594d
[ 12.491] (II) fglrx(0): 2a1201030e2e1e782adce1a754469e24
[ 12.491] (II) fglrx(0): 165054bfef80b30081808140714f0101
[ 12.491] (II) fglrx(0): 0101010101017c2e90a0601a1e403020
[ 12.491] (II) fglrx(0): 3600cb281100001a000000fd00384b1e
[ 12.491] (II) fglrx(0): 510e000a202020202020000000fc0053
[ 12.491] (II) fglrx(0): 796e634d61737465720a2020000000ff
[ 12.491] (II) fglrx(0): 00484d44514130353639390a20200009
[ 12.491] (II) fglrx(0): Printing probed modes for output CRT1
[ 12.491] (II) fglrx(0): Modeline "1680x1050"x60.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz eP)
[ 12.491] (II) fglrx(0): Modeline "1400x1050"x60.0 119.00 1400 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 12.491] (II) fglrx(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 12.491] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 12.491] (II) fglrx(0): Modeline "1440x900"x60.0 119.00 1440 1728 1760 1840 900 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 12.491] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 12.491] (II) fglrx(0): Modeline "1280x800"x60.0 108.00 1280 1376 1488 1800 800 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 12.491] (II) fglrx(0): Modeline "1152x864"x60.0 119.00 1152 1728 1760 1840 864 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 12.491] (II) fglrx(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 12.491] (II) fglrx(0): Modeline "1280x768"x60.0 108.00 1280 1376 1488 1800 768 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 12.491] (II) fglrx(0): Modeline "1280x720"x60.0 108.00 1280 1376 1488 1800 720 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 12.491] (II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 12.491] (II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 12.491] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 12.491] (II) fglrx(0): Modeline "800x600"x72.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 12.491] (II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 12.491] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 12.491] (II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 12.491] (II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 12.491] (II) fglrx(0): Modeline "640x480"x72.0 31.50 640 656 696 832 480 481 484 520 -hsync -vsync (37.9 kHz e)
[ 12.491] (II) fglrx(0): Modeline "640x480"x67.0 27.28 640 664 728 816 480 481 484 499 -hsync +vsync (33.4 kHz e)
[ 12.491] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 12.491] (II) fglrx(0): Output DFP1 disconnected
[ 12.491] (II) fglrx(0): Output DFP2 disconnected
[ 12.491] (II) fglrx(0): Output DFP3 disconnected
[ 12.491] (II) fglrx(0): Output DFP4 disconnected
[ 12.491] (II) fglrx(0): Output DFP5 disconnected
[ 12.491] (II) fglrx(0): Output DFP6 disconnected
[ 12.491] (II) fglrx(0): Output DFP7 disconnected
[ 12.491] (II) fglrx(0): Output DFP8 disconnected
[ 12.491] (II) fglrx(0): Output DFP9 disconnected
[ 12.491] (II) fglrx(0): Output DFP10 disconnected
[ 12.491] (II) fglrx(0): Output DFP11 disconnected
[ 12.491] (II) fglrx(0): Output CRT1 connected
[ 12.491] (II) fglrx(0): Using exact sizes for initial modes
[ 12.491] (II) fglrx(0): Output CRT1 using initial mode 1680x1050
[ 12.491] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 12.491] (II) fglrx(0): DPI set to (96, 96)
[ 12.491] (II) fglrx(0): Eyefinity capable adapter detected.
[ 12.491] (II) fglrx(0): Adapter AMD Radeon HD 7900 Series has 6 configurable heads and 1 displays connected.
[ 12.491] (==) fglrx(0): PseudoColor visuals disabled
[ 12.491] (II) Loading sub module "ramdac"
[ 12.491] (II) LoadModule: "ramdac"
[ 12.491] (II) Module "ramdac" already built-in
[ 12.491] (==) fglrx(0): NoDRI = NO
[ 12.491] (==) fglrx(0): Capabilities: 0x00000000
[ 12.491] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 12.491] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 12.491] (==) fglrx(0): UseFastTLS=0
[ 12.491] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[ 12.491] (--) Depth 24 pixmap format is 32 bpp
[ 12.491] (II) fglrx(0): doing swlDriScreenInit
[ 12.491] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 12.491] ukiDynamicMajor: found major device number 251
[ 12.491] ukiDynamicMajor: found major device number 251
[ 12.492] ukiDynamicMajor: found major device number 251
[ 12.492] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 12.492] ukiOpenDevice: node name is /dev/ati/card0
[ 12.492] ukiOpenDevice: open result is 12, (OK)
[ 12.492] ukiOpenByBusid: ukiOpenMinor returns 12
[ 12.492] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 12.492] (II) fglrx(0): [uki] DRM interface version 1.0
[ 12.492] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 12.492] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 12.492] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7fb4212fd000
[ 12.492] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 12.492] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 12.492] (II) fglrx(0): swlDriScreenInit done
[ 12.492] (II) fglrx(0): Kernel Module Version Information:
[ 12.492] (II) fglrx(0): Name: fglrx
[ 12.492] (II) fglrx(0): Version: 14.20.7
[ 12.492] (II) fglrx(0): Date: Sep 2 2014
[ 12.492] (II) fglrx(0): Desc: AMD FireGL DRM kernel module
[ 12.492] (II) fglrx(0): Kernel Module version matches driver.
[ 12.492] (II) fglrx(0): Kernel Module Build Time Information:
[ 12.492] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.16.0-4-amd64
[ 12.492] (II) fglrx(0): Build-Kernel MODVERSIONS: no
[ 12.492] (II) fglrx(0): Build-Kernel __SMP__: no
[ 12.492] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 12.492] (II) fglrx(0): [uki] register handle = 0x00004000
[ 12.494] (II) fglrx(0): Display width adjusted to to 1792 due to alignment constraints
[ 12.494] (II) fglrx(0): DRI initialization successfull
[ 12.499] (II) fglrx(0): FBADPhys: 0xf400000000 FBMappedSize: 0x010a0000
[ 12.505] (==) fglrx(0): Backing store enabled
[ 12.505] (**) fglrx(0): DPMS enabled
[ 12.505] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 12.505] (**) fglrx(0): Textured Video is enabled.
[ 12.505] (II) LoadModule: "glesx"
[ 12.505] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 12.591] (II) Module glesx: vendor="X.Org Foundation"
[ 12.591] compiled for 1.4.99.906, module version = 1.0.0
[ 12.591] (II) fglrx(0): GLESX enableFlags = 8784
[ 12.592] (II) fglrx(0): GLESX is enabled
[ 12.592] (II) LoadModule: "amdxmm"
[ 12.592] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 12.599] (II) Module amdxmm: vendor="X.Org Foundation"
[ 12.599] compiled for 1.4.99.906, module version = 2.0.0
[ 12.617] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 12.618] (II) fglrx(0): Enable composite support successfully
[ 12.618] (WW) fglrx(0): Option "VendorName" is not used
[ 12.618] (WW) fglrx(0): Option "ModelName" is not used
[ 12.618] (II) fglrx(0): X context handle = 0x1
[ 12.618] (II) fglrx(0): [DRI] installation complete
[ 12.618] (==) fglrx(0): Silken mouse enabled
[ 12.619] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 12.619] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 12.733] (--) RandR disabled
[ 12.736] (II) SELinux: Disabled on system
[ 12.749] ukiDynamicMajor: found major device number 251
[ 12.749] ukiDynamicMajor: found major device number 251
[ 12.749] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 12.749] ukiOpenDevice: node name is /dev/ati/card0
[ 12.749] ukiOpenDevice: open result is 13, (OK)
[ 12.749] ukiOpenByBusid: ukiOpenMinor returns 13
[ 12.749] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 12.749] (EE) AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
[ 12.749] (EE) AIGLX error: failed to open /usr/lib64/dri/fglrx_dri.so, error[/usr/lib64/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
[ 12.749] (EE) AIGLX error: failed to open /usr/X11R6/lib/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
[ 12.903] ukiDynamicMajor: found major device number 251
[ 12.903] ukiDynamicMajor: found major device number 251
[ 12.903] ukiDynamicMajor: found major device number 251
[ 12.903] ukiOpenDevice: node name is /dev/ati/card0
[ 12.903] ukiOpenDevice: open result is 14, (OK)
[ 12.903] ukiGetBusid returned 'PCI:1:0:0'
[ 12.903] ukiOpenDevice: node name is /dev/ati/card1
[ 12.903] ukiOpenDevice: open result is -1, (No such device)
[ 12.904] ukiOpenDevice: open result is -1, (No such device)
[ 12.904] ukiOpenDevice: Open failed
[ 12.904] ukiOpenDevice: node name is /dev/ati/card2
[ 12.904] ukiOpenDevice: open result is -1, (No such device)
[ 12.904] ukiOpenDevice: open result is -1, (No such device)
[ 12.904] ukiOpenDevice: Open failed
[ 12.904] ukiOpenDevice: node name is /dev/ati/card3
[ 12.904] ukiOpenDevice: open result is -1, (No such device)
[ 12.904] ukiOpenDevice: open result is -1, (No such device)
[ 12.904] ukiOpenDevice: Open failed
[ 12.904] ukiOpenDevice: node name is /dev/ati/card4
[ 12.904] ukiOpenDevice: open result is -1, (No such device)
[ 12.904] ukiOpenDevice: open result is -1, (No such device)
[ 12.904] ukiOpenDevice: Open failed
[ 12.904] ukiOpenDevice: node name is /dev/ati/card5
[ 12.904] ukiOpenDevice: open result is -1, (No such device)
[ 12.904] ukiOpenDevice: open result is -1, (No such device)
[ 12.904] ukiOpenDevice: Open failed
[ 12.904] ukiOpenDevice: node name is /dev/ati/card6
[ 12.904] ukiOpenDevice: open result is -1, (No such device)
[ 12.904] ukiOpenDevice: open result is -1, (No such device)
[ 12.904] ukiOpenDevice: Open failed
[ 12.904] ukiOpenDevice: node name is /dev/ati/card7
[ 12.904] ukiOpenDevice: open result is -1, (No such device)
[ 12.904] ukiOpenDevice: open result is -1, (No such device)
[ 12.904] ukiOpenDevice: Open failed
[ 12.904] ukiOpenDevice: node name is /dev/ati/card8
[ 12.904] ukiOpenDevice: open result is -1, (No such device)
[ 12.904] ukiOpenDevice: open result is -1, (No such device)
[ 12.904] ukiOpenDevice: Open failed
[ 12.904] ukiOpenDevice: node name is /dev/ati/card9
[ 12.904] ukiOpenDevice: open result is -1, (No such device)
[ 12.904] ukiOpenDevice: open result is -1, (No such device)
[ 12.904] ukiOpenDevice: Open failed
[ 12.904] ukiOpenDevice: node name is /dev/ati/card10
[ 12.904] ukiOpenDevice: open result is -1, (No such device)
[ 12.904] ukiOpenDevice: open result is -1, (No such device)
[ 12.904] ukiOpenDevice: Open failed
[ 12.904] ukiOpenDevice: node name is /dev/ati/card11
[ 12.904] ukiOpenDevice: open result is -1, (No such device)
[ 12.904] ukiOpenDevice: open result is -1, (No such device)
[ 12.904] ukiOpenDevice: Open failed
[ 12.904] ukiOpenDevice: node name is /dev/ati/card12
[ 12.904] ukiOpenDevice: open result is -1, (No such device)
[ 12.904] ukiOpenDevice: open result is -1, (No such device)
[ 12.904] ukiOpenDevice: Open failed
[ 12.904] ukiOpenDevice: node name is /dev/ati/card13
[ 12.904] ukiOpenDevice: open result is -1, (No such device)
[ 12.904] ukiOpenDevice: open result is -1, (No such device)
[ 12.904] ukiOpenDevice: Open failed
[ 12.904] ukiOpenDevice: node name is /dev/ati/card14
[ 12.904] ukiOpenDevice: open result is -1, (No such device)
[ 12.904] ukiOpenDevice: open result is -1, (No such device)
[ 12.904] ukiOpenDevice: Open failed
[ 12.904] ukiOpenDevice: node name is /dev/ati/card15
[ 12.904] ukiOpenDevice: open result is -1, (No such device)
[ 12.904] ukiOpenDevice: open result is -1, (No such device)
[ 12.904] ukiOpenDevice: Open failed
[ 12.904] ukiDynamicMajor: found major device number 251
[ 12.904] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 12.904] ukiOpenDevice: node name is /dev/ati/card0
[ 12.904] ukiOpenDevice: open result is 14, (OK)
[ 12.904] ukiOpenByBusid: ukiOpenMinor returns 14
[ 12.904] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 13.216] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 13.216] ukiDynamicMajor: found major device number 251
[ 13.216] ukiDynamicMajor: found major device number 251
[ 13.216] ukiDynamicMajor: found major device number 251
[ 13.216] ukiOpenDevice: node name is /dev/ati/card0
[ 13.216] ukiOpenDevice: open result is 15, (OK)
[ 13.216] ukiGetBusid returned 'PCI:1:0:0'
[ 13.216] ukiOpenDevice: node name is /dev/ati/card1
[ 13.216] ukiOpenDevice: open result is -1, (No such device)
[ 13.216] ukiOpenDevice: open result is -1, (No such device)
[ 13.216] ukiOpenDevice: Open failed
[ 13.216] ukiOpenDevice: node name is /dev/ati/card2
[ 13.216] ukiOpenDevice: open result is -1, (No such device)
[ 13.216] ukiOpenDevice: open result is -1, (No such device)
[ 13.216] ukiOpenDevice: Open failed
[ 13.216] ukiOpenDevice: node name is /dev/ati/card3
[ 13.216] ukiOpenDevice: open result is -1, (No such device)
[ 13.216] ukiOpenDevice: open result is -1, (No such device)
[ 13.216] ukiOpenDevice: Open failed
[ 13.216] ukiOpenDevice: node name is /dev/ati/card4
[ 13.216] ukiOpenDevice: open result is -1, (No such device)
[ 13.216] ukiOpenDevice: open result is -1, (No such device)
[ 13.216] ukiOpenDevice: Open failed
[ 13.216] ukiOpenDevice: node name is /dev/ati/card5
[ 13.216] ukiOpenDevice: open result is -1, (No such device)
[ 13.216] ukiOpenDevice: open result is -1, (No such device)
[ 13.216] ukiOpenDevice: Open failed
[ 13.216] ukiOpenDevice: node name is /dev/ati/card6
[ 13.216] ukiOpenDevice: open result is -1, (No such device)
[ 13.216] ukiOpenDevice: open result is -1, (No such device)
[ 13.216] ukiOpenDevice: Open failed
[ 13.216] ukiOpenDevice: node name is /dev/ati/card7
[ 13.216] ukiOpenDevice: open result is -1, (No such device)
[ 13.216] ukiOpenDevice: open result is -1, (No such device)
[ 13.216] ukiOpenDevice: Open failed
[ 13.216] ukiOpenDevice: node name is /dev/ati/card8
[ 13.216] ukiOpenDevice: open result is -1, (No such device)
[ 13.216] ukiOpenDevice: open result is -1, (No such device)
[ 13.216] ukiOpenDevice: Open failed
[ 13.216] ukiOpenDevice: node name is /dev/ati/card9
[ 13.216] ukiOpenDevice: open result is -1, (No such device)
[ 13.216] ukiOpenDevice: open result is -1, (No such device)
[ 13.216] ukiOpenDevice: Open failed
[ 13.216] ukiOpenDevice: node name is /dev/ati/card10
[ 13.216] ukiOpenDevice: open result is -1, (No such device)
[ 13.216] ukiOpenDevice: open result is -1, (No such device)
[ 13.216] ukiOpenDevice: Open failed
[ 13.216] ukiOpenDevice: node name is /dev/ati/card11
[ 13.216] ukiOpenDevice: open result is -1, (No such device)
[ 13.216] ukiOpenDevice: open result is -1, (No such device)
[ 13.216] ukiOpenDevice: Open failed
[ 13.216] ukiOpenDevice: node name is /dev/ati/card12
[ 13.216] ukiOpenDevice: open result is -1, (No such device)
[ 13.216] ukiOpenDevice: open result is -1, (No such device)
[ 13.216] ukiOpenDevice: Open failed
[ 13.216] ukiOpenDevice: node name is /dev/ati/card13
[ 13.216] ukiOpenDevice: open result is -1, (No such device)
[ 13.216] ukiOpenDevice: open result is -1, (No such device)
[ 13.216] ukiOpenDevice: Open failed
[ 13.216] ukiOpenDevice: node name is /dev/ati/card14
[ 13.216] ukiOpenDevice: open result is -1, (No such device)
[ 13.216] ukiOpenDevice: open result is -1, (No such device)
[ 13.216] ukiOpenDevice: Open failed
[ 13.216] ukiOpenDevice: node name is /dev/ati/card15
[ 13.216] ukiOpenDevice: open result is -1, (No such device)
[ 13.216] ukiOpenDevice: open result is -1, (No such device)
[ 13.216] ukiOpenDevice: Open failed
[ 13.216] ukiDynamicMajor: found major device number 251
[ 13.216] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 13.216] ukiOpenDevice: node name is /dev/ati/card0
[ 13.216] ukiOpenDevice: open result is 15, (OK)
[ 13.216] ukiOpenByBusid: ukiOpenMinor returns 15
[ 13.216] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 13.292] (II) fglrx(0): OverDrive5 Detected!
[ 13.295] (II) fglrx(0): Setting screen physical size to 444 x 277
[ 13.572] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 13.572] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 13.572] (II) LoadModule: "evdev"
[ 13.572] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 13.617] (II) Module evdev: vendor="X.Org Foundation"
[ 13.617] compiled for 1.16.0, module version = 2.9.0
[ 13.617] Module class: X.Org XInput Driver
[ 13.617] ABI class: X.Org XInput driver, version 21.0
[ 13.617] (II) Using input driver 'evdev' for 'Power Button'
[ 13.617] (**) Power Button: always reports core events
[ 13.617] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 13.617] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 13.617] (--) evdev: Power Button: Found keys
[ 13.617] (II) evdev: Power Button: Configuring as keyboard
[ 13.617] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event1"
[ 13.617] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 13.617] (**) Option "xkb_rules" "evdev"
[ 13.617] (**) Option "xkb_model" "pc105"
[ 13.617] (**) Option "xkb_layout" "pl"
[ 13.649] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 13.649] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 13.649] (II) Using input driver 'evdev' for 'Power Button'
[ 13.649] (**) Power Button: always reports core events
[ 13.649] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 13.649] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 13.649] (--) evdev: Power Button: Found keys
[ 13.649] (II) evdev: Power Button: Configuring as keyboard
[ 13.649] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event0"
[ 13.649] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 13.649] (**) Option "xkb_rules" "evdev"
[ 13.649] (**) Option "xkb_model" "pc105"
[ 13.649] (**) Option "xkb_layout" "pl"
[ 13.649] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=10 (/dev/input/event7)
[ 13.649] (II) No input driver specified, ignoring this device.
[ 13.649] (II) This device may have been added with another device file.
[ 13.649] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=11 (/dev/input/event8)
[ 13.649] (II) No input driver specified, ignoring this device.
[ 13.649] (II) This device may have been added with another device file.
[ 13.649] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event3)
[ 13.649] (II) No input driver specified, ignoring this device.
[ 13.649] (II) This device may have been added with another device file.
[ 13.649] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event4)
[ 13.649] (II) No input driver specified, ignoring this device.
[ 13.649] (II) This device may have been added with another device file.
[ 13.649] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=8 (/dev/input/event5)
[ 13.649] (II) No input driver specified, ignoring this device.
[ 13.649] (II) This device may have been added with another device file.
[ 13.649] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=9 (/dev/input/event6)
[ 13.649] (II) No input driver specified, ignoring this device.
[ 13.649] (II) This device may have been added with another device file.
[ 13.650] (II) config/udev: Adding input device SIGMACHIP USB Keyboard (/dev/input/event16)
[ 13.650] (**) SIGMACHIP USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 13.650] (II) Using input driver 'evdev' for 'SIGMACHIP USB Keyboard'
[ 13.650] (**) SIGMACHIP USB Keyboard: always reports core events
[ 13.650] (**) evdev: SIGMACHIP USB Keyboard: Device: "/dev/input/event16"
[ 13.650] (--) evdev: SIGMACHIP USB Keyboard: Vendor 0x1c4f Product 0x26
[ 13.650] (--) evdev: SIGMACHIP USB Keyboard: Found keys
[ 13.650] (II) evdev: SIGMACHIP USB Keyboard: Configuring as keyboard
[ 13.650] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/0003:1C4F:0026.0001/input/input19/event16"
[ 13.650] (II) XINPUT: Adding extended input device "SIGMACHIP USB Keyboard" (type: KEYBOARD, id 8)
[ 13.650] (**) Option "xkb_rules" "evdev"
[ 13.650] (**) Option "xkb_model" "pc105"
[ 13.650] (**) Option "xkb_layout" "pl"
[ 13.650] (II) config/udev: Adding input device SIGMACHIP USB Keyboard (/dev/input/event17)
[ 13.650] (**) SIGMACHIP USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 13.650] (II) Using input driver 'evdev' for 'SIGMACHIP USB Keyboard'
[ 13.650] (**) SIGMACHIP USB Keyboard: always reports core events
[ 13.650] (**) evdev: SIGMACHIP USB Keyboard: Device: "/dev/input/event17"
[ 13.650] (--) evdev: SIGMACHIP USB Keyboard: Vendor 0x1c4f Product 0x26
[ 13.650] (--) evdev: SIGMACHIP USB Keyboard: Found 1 mouse buttons
[ 13.650] (--) evdev: SIGMACHIP USB Keyboard: Found scroll wheel(s)
[ 13.650] (--) evdev: SIGMACHIP USB Keyboard: Found relative axes
[ 13.650] (II) evdev: SIGMACHIP USB Keyboard: Forcing relative x/y axes to exist.
[ 13.650] (--) evdev: SIGMACHIP USB Keyboard: Found absolute axes
[ 13.650] (II) evdev: SIGMACHIP USB Keyboard: Forcing absolute x/y axes to exist.
[ 13.650] (--) evdev: SIGMACHIP USB Keyboard: Found keys
[ 13.650] (II) evdev: SIGMACHIP USB Keyboard: Configuring as mouse
[ 13.650] (II) evdev: SIGMACHIP USB Keyboard: Configuring as keyboard
[ 13.650] (II) evdev: SIGMACHIP USB Keyboard: Adding scrollwheel support
[ 13.650] (**) evdev: SIGMACHIP USB Keyboard: YAxisMapping: buttons 4 and 5
[ 13.650] (**) evdev: SIGMACHIP USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 13.650] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.1/0003:1C4F:0026.0002/input/input20/event17"
[ 13.650] (II) XINPUT: Adding extended input device "SIGMACHIP USB Keyboard" (type: KEYBOARD, id 9)
[ 13.650] (**) Option "xkb_rules" "evdev"
[ 13.650] (**) Option "xkb_model" "pc105"
[ 13.650] (**) Option "xkb_layout" "pl"
[ 13.650] (II) evdev: SIGMACHIP USB Keyboard: initialized for relative axes.
[ 13.650] (WW) evdev: SIGMACHIP USB Keyboard: ignoring absolute axes.
[ 13.650] (**) SIGMACHIP USB Keyboard: (accel) keeping acceleration scheme 1
[ 13.650] (**) SIGMACHIP USB Keyboard: (accel) acceleration profile 0
[ 13.650] (**) SIGMACHIP USB Keyboard: (accel) acceleration factor: 2.000
[ 13.650] (**) SIGMACHIP USB Keyboard: (accel) acceleration threshold: 4
[ 13.650] (II) config/udev: Adding input device HID-compliant Mouse HID-compliant Mouse (/dev/input/event18)
[ 13.650] (**) HID-compliant Mouse HID-compliant Mouse: Applying InputClass "evdev pointer catchall"
[ 13.650] (II) Using input driver 'evdev' for 'HID-compliant Mouse HID-compliant Mouse'
[ 13.650] (**) HID-compliant Mouse HID-compliant Mouse: always reports core events
[ 13.650] (**) evdev: HID-compliant Mouse HID-compliant Mouse: Device: "/dev/input/event18"
[ 13.650] (--) evdev: HID-compliant Mouse HID-compliant Mouse: Vendor 0x1d57 Product 0x5
[ 13.650] (--) evdev: HID-compliant Mouse HID-compliant Mouse: Found 9 mouse buttons
[ 13.650] (--) evdev: HID-compliant Mouse HID-compliant Mouse: Found scroll wheel(s)
[ 13.650] (--) evdev: HID-compliant Mouse HID-compliant Mouse: Found relative axes
[ 13.650] (--) evdev: HID-compliant Mouse HID-compliant Mouse: Found x and y relative axes
[ 13.650] (II) evdev: HID-compliant Mouse HID-compliant Mouse: Configuring as mouse
[ 13.650] (II) evdev: HID-compliant Mouse HID-compliant Mouse: Adding scrollwheel support
[ 13.650] (**) evdev: HID-compliant Mouse HID-compliant Mouse: YAxisMapping: buttons 4 and 5
[ 13.650] (**) evdev: HID-compliant Mouse HID-compliant Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 13.650] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.0/0003:1D57:0005.0003/input/input21/event18"
[ 13.650] (II) XINPUT: Adding extended input device "HID-compliant Mouse HID-compliant Mouse" (type: MOUSE, id 10)
[ 13.650] (II) evdev: HID-compliant Mouse HID-compliant Mouse: initialized for relative axes.
[ 13.651] (**) HID-compliant Mouse HID-compliant Mouse: (accel) keeping acceleration scheme 1
[ 13.651] (**) HID-compliant Mouse HID-compliant Mouse: (accel) acceleration profile 0
[ 13.651] (**) HID-compliant Mouse HID-compliant Mouse: (accel) acceleration factor: 2.000
[ 13.651] (**) HID-compliant Mouse HID-compliant Mouse: (accel) acceleration threshold: 4
[ 13.651] (II) config/udev: Adding input device HID-compliant Mouse HID-compliant Mouse (/dev/input/mouse0)
[ 13.651] (II) No input driver specified, ignoring this device.
[ 13.651] (II) This device may have been added with another device file.
[ 13.651] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event9)
[ 13.651] (II) No input driver specified, ignoring this device.
[ 13.651] (II) This device may have been added with another device file.
[ 13.651] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event10)
[ 13.651] (II) No input driver specified, ignoring this device.
[ 13.651] (II) This device may have been added with another device file.
[ 13.651] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event11)
[ 13.651] (II) No input driver specified, ignoring this device.
[ 13.651] (II) This device may have been added with another device file.
[ 13.651] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event12)
[ 13.651] (II) No input driver specified, ignoring this device.
[ 13.651] (II) This device may have been added with another device file.
[ 13.651] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event13)
[ 13.651] (II) No input driver specified, ignoring this device.
[ 13.651] (II) This device may have been added with another device file.
[ 13.651] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event14)
[ 13.651] (II) No input driver specified, ignoring this device.
[ 13.651] (II) This device may have been added with another device file.
[ 13.651] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event15)
[ 13.651] (II) No input driver specified, ignoring this device.
[ 13.651] (II) This device may have been added with another device file.
[ 13.651] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 13.651] (II) No input driver specified, ignoring this device.
[ 13.651] (II) This device may have been added with another device file.
[ 13.653] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 29.788] (II) fglrx(0): EDID vendor "SAM", prod id 1064
[ 29.788] (II) fglrx(0): Using EDID range info for horizontal sync
[ 29.788] (II) fglrx(0): Using EDID range info for vertical refresh
[ 29.788] (II) fglrx(0): Printing DDC gathered Modelines:
[ 29.788] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz eP)
[ 29.788] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 29.788] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 29.788] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 29.788] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 29.788] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 29.788] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 29.788] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 29.788] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 29.788] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 29.788] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 29.788] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 29.788] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 29.788] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 29.788] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 29.788] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 29.788] (II) fglrx(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 29.788] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 29.788] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 32.549] (II) fglrx(0): EDID vendor "SAM", prod id 1064
[ 32.549] (II) fglrx(0): Using hsync ranges from config file
[ 32.549] (II) fglrx(0): Using vrefresh ranges from config file
[ 32.549] (II) fglrx(0): Printing DDC gathered Modelines:
[ 32.549] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz eP)
[ 32.549] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 32.549] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 32.549] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 32.549] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 32.549] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 32.549] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 32.549] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 32.549] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 32.549] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 32.549] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 32.549] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 32.549] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 32.549] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 32.549] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 32.549] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 32.549] (II) fglrx(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 32.549] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 32.549] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)