Po swiezej instalacji Debiana - BIOS nie widzi dysku SATA.

Ogólne pytania dotyczące systemu
Matrixx
Beginner
Posty: 235
Rejestracja: 03 maja 2016, 16:30

Po swiezej instalacji Debiana - BIOS nie widzi dysku SATA.

Post autor: Matrixx »

Dzien dobry wszystkim.
Dwa dni wstecz zainstalowalem Debiana8 (wiem ze oldstable) na plycie z Asus Uefi Bios Utility. Wczoraj po swiezej instalacji uzywalem go bez zadnych problemow przez kilka godzin. Dzisiaj rano chce odpalic, niestety dysk "znikl" Wchodze do biosu, tam: dysk optyczny - jest, zewnetrzny USB - jest. Ani sladu po SATA HDD.
W ustawieniach Bios,u jest info "SATA device is not installed"
Zaczolem szukac przyczyny:
- sprawdzilem dysk na innym komputerze - dzialal.
- przelozylem kabel SATA do innego kompa - dzialal
- patrze w Biosi,e - AHCI wlaczone na wszystkich portach.
- wylaczylem Secure Boot na wszelki wypadek - nie pomoglo.
Szukam info w Googlach na haslo "Bios does not automatically detect of SATA devices"
Przecwiczylem moze 10 roznych kombinacji, nic nie pomoglo.
Mysle, ze przyczyna jest problem ze uszkodzonym sterownikiem dla urzadzen SATA.

Bardzo prosze o wskazanie mi wlasciwej drogi rozwiazania tego problemu....
Cala sobote diabli wzieli. :confused:
Awatar użytkownika
Yampress
Administrator
Posty: 6365
Rejestracja: 09 sierpnia 2007, 21:41
Lokalizacja: PL

Re: Po swiezej instalacji Debiana - BIOS nie widzi dysku SATA.

Post autor: Yampress »

przełuż kabelek sata w inne gniazdo sata na płycie głownej
Matrixx
Beginner
Posty: 235
Rejestracja: 03 maja 2016, 16:30

Re: Po swiezej instalacji Debiana - BIOS nie widzi dysku SATA.

Post autor: Matrixx »

Pozdrawiam ponownie w niedziele, niestety i prosze o odrobine cierpliwosci.
- Przelozylem kabelek - nie pomoglo.
- Podczas bootowania (PAST) jest komunikat "insert bootable media"
- Uzylem automatycznego konfiguratora "Boot Repair Disk" - nie pomoglo.
- Kiedy odpalam Debian LiveCD - manager plikow widzi zawartosc niebotowalnego dysku.
- Bios bootuje: naped optyczny na SATA oraz botuje system na pendrive USB, nie bootuje tylko dysku HDD na SATA.
Dysk HDD i kable, sprawdzone - dzialaja.
Jaki z tego wszystkiego wniosek ?
Staram sie sam rozwiazac ten problem, ale nie udaje mi sie.
Info o dysku:

Kod: Zaznacz cały

[/dev/sda:

ATA device, with non-removable media
	Model Number:       ST3250820AS                             
	Serial Number:      5QE3AGVY
	Firmware Revision:  3.ADG   
Standards:
	Supported: 7 6 5 4 
	Likely used: 7
Configuration:
	Logical		max	current
	cylinders	16383	16383
	heads		16	16
	sectors/track	63	63
	--
	CHS current addressable sectors:   16514064
	LBA    user addressable sectors:  268435455
	LBA48  user addressable sectors:  488281250
	Logical  Sector size:                   512 bytes
	Physical Sector size:                   512 bytes
	device size with M = 1024*1024:      238418 MBytes
	device size with M = 1000*1000:      250000 MBytes (250 GB)
	cache/buffer size  = 8192 KBytes
Capabilities:
	LBA, IORDY(can be disabled)
	Queue depth: 32
	Standby timer values: spec'd by Standard, no device specific minimum
	R/W multiple sector transfer: Max = 16	Current = ?
	Recommended acoustic management value: 208, current value: 0
	DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 
	     Cycle time: min=120ns recommended=120ns
	PIO: pio0 pio1 pio2 pio3 pio4 
	     Cycle time: no flow control=240ns  IORDY flow control=120ns
Commands/features:
	Enabled	Supported:
	   *	SMART feature set
	    	Security Mode feature set
	   *	Power Management feature set
	   *	Write cache
	   *	Look-ahead
	   *	Host Protected Area feature set
	   *	WRITE_BUFFER command
	   *	READ_BUFFER command
	   *	DOWNLOAD_MICROCODE
	    	SET_MAX security extension
	    	Automatic Acoustic Management feature set
	   *	48-bit Address feature set
	   *	Mandatory FLUSH_CACHE
	   *	FLUSH_CACHE_EXT
	   *	SMART error logging
	   *	SMART self-test
	   *	General Purpose Logging feature set
	   *	Gen1 signaling speed (1.5Gb/s)
	   *	Gen2 signaling speed (3.0Gb/s)
	   *	Native Command Queueing (NCQ)
	   *	Phy event counters
	    	Device-initiated interface power management
	   *	Software settings preservation
Security: 
	Master password revision code = 65534
		supported
	not	enabled
	not	locked
	not	frozen
	not	expired: security count
	not	supported: enhanced erase
Checksum: correct[\code]
Ostatnio zmieniony 17 stycznia 2021, 15:52 przez Matrixx, łącznie zmieniany 2 razy.
hepa
Beginner
Posty: 108
Rejestracja: 07 maja 2018, 19:56

Re: Po swiezej instalacji Debiana - BIOS nie widzi dysku SATA.

Post autor: hepa »

A masz możliwość odłączyć cały komputer od sieci elektrycznej ? (Na kilka minut).

Może cos się przywiesilo na elektronice. ?

Spróbuj.
Matrixx
Beginner
Posty: 235
Rejestracja: 03 maja 2016, 16:30

Re: Po swiezej instalacji Debiana - BIOS nie widzi dysku SATA.

Post autor: Matrixx »

Odlaczylem jak przepinalem dysk i przewody - usterka ciagle trwa.
W mojej opinji problem lezy gdzies pomiedzy: bootloader GRUB --> SATA kontroller --> SATA drivers.
Jak to sprawdzic ? :confused:

Ps. Mysle, ze mozna postawic 2 pytania:
- jakie opcje bootowania sa wlaczone w Grubie?
- dlaczego Grub nie bootuje dysku SATA ?

boot/grub/grub.cfg

Kod: Zaznacz cały

#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3  e9f372d6-c51a-4bad-ae43-a86afb815226
else
  search --no-floppy --fs-uuid --set=root e9f372d6-c51a-4bad-ae43-a86afb815226
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=en_IE
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=menu
    set timeout=5
  # Fallback normal timeout code in case the timeout_style feature is
  # unavailable.
  else
    set timeout=5
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
insmod part_msdos
insmod ext2
set root='hd0,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3  e9f372d6-c51a-4bad-ae43-a86afb815226
else
  search --no-floppy --fs-uuid --set=root e9f372d6-c51a-4bad-ae43-a86afb815226
fi
insmod png
if background_image /usr/share/desktop-base/futureprototype-theme/grub/grub-4x3.png; then
  set color_normal=white/black
  set color_highlight=black/white
else
  set menu_color_normal=cyan/blue
  set menu_color_highlight=white/blue
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
}
set linux_gfx_mode=
export linux_gfx_mode
menuentry 'Debian GNU/Linux' --class debian --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-e9f372d6-c51a-4bad-ae43-a86afb815226' {
	load_video
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos3'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3  e9f372d6-c51a-4bad-ae43-a86afb815226
	else
	  search --no-floppy --fs-uuid --set=root e9f372d6-c51a-4bad-ae43-a86afb815226
	fi
	echo	'Loading Linux 4.19.0-13-amd64 ...'
	linux	/boot/vmlinuz-4.19.0-13-amd64 root=UUID=e9f372d6-c51a-4bad-ae43-a86afb815226 ro  quiet
	echo	'Loading initial ramdisk ...'
	initrd	/boot/initrd.img-4.19.0-13-amd64
}
submenu 'Advanced options for Debian GNU/Linux' $menuentry_id_option 'gnulinux-advanced-e9f372d6-c51a-4bad-ae43-a86afb815226' {
	menuentry 'Debian GNU/Linux, with Linux 4.19.0-13-amd64' --class debian --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.19.0-13-amd64-advanced-e9f372d6-c51a-4bad-ae43-a86afb815226' {
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos3'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3  e9f372d6-c51a-4bad-ae43-a86afb815226
		else
		  search --no-floppy --fs-uuid --set=root e9f372d6-c51a-4bad-ae43-a86afb815226
		fi
		echo	'Loading Linux 4.19.0-13-amd64 ...'
		linux	/boot/vmlinuz-4.19.0-13-amd64 root=UUID=e9f372d6-c51a-4bad-ae43-a86afb815226 ro  quiet
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.19.0-13-amd64
	}
	menuentry 'Debian GNU/Linux, with Linux 4.19.0-13-amd64 (recovery mode)' --class debian --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.19.0-13-amd64-recovery-e9f372d6-c51a-4bad-ae43-a86afb815226' {
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos3'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3  e9f372d6-c51a-4bad-ae43-a86afb815226
		else
		  search --no-floppy --fs-uuid --set=root e9f372d6-c51a-4bad-ae43-a86afb815226
		fi
		echo	'Loading Linux 4.19.0-13-amd64 ...'
		linux	/boot/vmlinuz-4.19.0-13-amd64 root=UUID=e9f372d6-c51a-4bad-ae43-a86afb815226 ro single 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.19.0-13-amd64
	}
	menuentry 'Debian GNU/Linux, with Linux 4.19.0-5-amd64' --class debian --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.19.0-5-amd64-advanced-e9f372d6-c51a-4bad-ae43-a86afb815226' {
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos3'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3  e9f372d6-c51a-4bad-ae43-a86afb815226
		else
		  search --no-floppy --fs-uuid --set=root e9f372d6-c51a-4bad-ae43-a86afb815226
		fi
		echo	'Loading Linux 4.19.0-5-amd64 ...'
		linux	/boot/vmlinuz-4.19.0-5-amd64 root=UUID=e9f372d6-c51a-4bad-ae43-a86afb815226 ro  quiet
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.19.0-5-amd64
	}
	menuentry 'Debian GNU/Linux, with Linux 4.19.0-5-amd64 (recovery mode)' --class debian --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.19.0-5-amd64-recovery-e9f372d6-c51a-4bad-ae43-a86afb815226' {
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos3'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3  e9f372d6-c51a-4bad-ae43-a86afb815226
		else
		  search --no-floppy --fs-uuid --set=root e9f372d6-c51a-4bad-ae43-a86afb815226
		fi
		echo	'Loading Linux 4.19.0-5-amd64 ...'
		linux	/boot/vmlinuz-4.19.0-5-amd64 root=UUID=e9f372d6-c51a-4bad-ae43-a86afb815226 ro single 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.19.0-5-amd64
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Debian GNU/Linux 8 (jessie) (on /dev/sda1)' --class debian --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-e14c4448-7466-4152-9e67-eeafff97ea6c' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  e14c4448-7466-4152-9e67-eeafff97ea6c
	else
	  search --no-floppy --fs-uuid --set=root e14c4448-7466-4152-9e67-eeafff97ea6c
	fi
	linux /boot/vmlinuz-3.16.0-4-amd64 root=UUID=e14c4448-7466-4152-9e67-eeafff97ea6c ro quiet
	initrd /boot/initrd.img-3.16.0-4-amd64
}
submenu 'Advanced options for Debian GNU/Linux 8 (jessie) (on /dev/sda1)' $menuentry_id_option 'osprober-gnulinux-advanced-e14c4448-7466-4152-9e67-eeafff97ea6c' {
	menuentry 'Debian GNU/Linux (on /dev/sda1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.16.0-4-amd64--e14c4448-7466-4152-9e67-eeafff97ea6c' {
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  e14c4448-7466-4152-9e67-eeafff97ea6c
		else
		  search --no-floppy --fs-uuid --set=root e14c4448-7466-4152-9e67-eeafff97ea6c
		fi
		linux /boot/vmlinuz-3.16.0-4-amd64 root=UUID=e14c4448-7466-4152-9e67-eeafff97ea6c ro quiet
		initrd /boot/initrd.img-3.16.0-4-amd64
	}
	menuentry 'Debian GNU/Linux, with Linux 3.16.0-4-amd64 (on /dev/sda1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.16.0-4-amd64--e14c4448-7466-4152-9e67-eeafff97ea6c' {
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  e14c4448-7466-4152-9e67-eeafff97ea6c
		else
		  search --no-floppy --fs-uuid --set=root e14c4448-7466-4152-9e67-eeafff97ea6c
		fi
		linux /boot/vmlinuz-3.16.0-4-amd64 root=UUID=e14c4448-7466-4152-9e67-eeafff97ea6c ro quiet
		initrd /boot/initrd.img-3.16.0-4-amd64
	}
	menuentry 'Debian GNU/Linux, with Linux 3.16.0-4-amd64 (recovery mode) (on /dev/sda1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.16.0-4-amd64-root=UUID=e14c4448-7466-4152-9e67-eeafff97ea6c ro single-e14c4448-7466-4152-9e67-eeafff97ea6c' {
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  e14c4448-7466-4152-9e67-eeafff97ea6c
		else
		  search --no-floppy --fs-uuid --set=root e14c4448-7466-4152-9e67-eeafff97ea6c
		fi
		linux /boot/vmlinuz-3.16.0-4-amd64 root=UUID=e14c4448-7466-4152-9e67-eeafff97ea6c ro single
		initrd /boot/initrd.img-3.16.0-4-amd64
	}
}

menuentry 'Debian GNU/Linux 9 (stretch) (on /dev/sda2)' --class debian --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-b33412ee-1706-4621-a40f-7f80b0c0d754' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos2'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2  b33412ee-1706-4621-a40f-7f80b0c0d754
	else
	  search --no-floppy --fs-uuid --set=root b33412ee-1706-4621-a40f-7f80b0c0d754
	fi
	linux /boot/vmlinuz-4.9.0-14-amd64 root=UUID=b33412ee-1706-4621-a40f-7f80b0c0d754 ro quiet
	initrd /boot/initrd.img-4.9.0-14-amd64
}
submenu 'Advanced options for Debian GNU/Linux 9 (stretch) (on /dev/sda2)' $menuentry_id_option 'osprober-gnulinux-advanced-b33412ee-1706-4621-a40f-7f80b0c0d754' {
	menuentry 'Debian GNU/Linux (on /dev/sda2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.9.0-14-amd64--b33412ee-1706-4621-a40f-7f80b0c0d754' {
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2  b33412ee-1706-4621-a40f-7f80b0c0d754
		else
		  search --no-floppy --fs-uuid --set=root b33412ee-1706-4621-a40f-7f80b0c0d754
		fi
		linux /boot/vmlinuz-4.9.0-14-amd64 root=UUID=b33412ee-1706-4621-a40f-7f80b0c0d754 ro quiet
		initrd /boot/initrd.img-4.9.0-14-amd64
	}
	menuentry 'Debian GNU/Linux, with Linux 4.9.0-14-amd64 (on /dev/sda2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.9.0-14-amd64--b33412ee-1706-4621-a40f-7f80b0c0d754' {
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2  b33412ee-1706-4621-a40f-7f80b0c0d754
		else
		  search --no-floppy --fs-uuid --set=root b33412ee-1706-4621-a40f-7f80b0c0d754
		fi
		linux /boot/vmlinuz-4.9.0-14-amd64 root=UUID=b33412ee-1706-4621-a40f-7f80b0c0d754 ro quiet
		initrd /boot/initrd.img-4.9.0-14-amd64
	}
	menuentry 'Debian GNU/Linux, with Linux 4.9.0-14-amd64 (recovery mode) (on /dev/sda2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.9.0-14-amd64-root=UUID=b33412ee-1706-4621-a40f-7f80b0c0d754 ro single-b33412ee-1706-4621-a40f-7f80b0c0d754' {
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2  b33412ee-1706-4621-a40f-7f80b0c0d754
		else
		  search --no-floppy --fs-uuid --set=root b33412ee-1706-4621-a40f-7f80b0c0d754
		fi
		linux /boot/vmlinuz-4.9.0-14-amd64 root=UUID=b33412ee-1706-4621-a40f-7f80b0c0d754 ro single
		initrd /boot/initrd.img-4.9.0-14-amd64
	}
	menuentry 'Debian GNU/Linux, with Linux 4.9.0-13-amd64 (on /dev/sda2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.9.0-13-amd64--b33412ee-1706-4621-a40f-7f80b0c0d754' {
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2  b33412ee-1706-4621-a40f-7f80b0c0d754
		else
		  search --no-floppy --fs-uuid --set=root b33412ee-1706-4621-a40f-7f80b0c0d754
		fi
		linux /boot/vmlinuz-4.9.0-13-amd64 root=UUID=b33412ee-1706-4621-a40f-7f80b0c0d754 ro quiet
		initrd /boot/initrd.img-4.9.0-13-amd64
	}
	menuentry 'Debian GNU/Linux, with Linux 4.9.0-13-amd64 (recovery mode) (on /dev/sda2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.9.0-13-amd64-root=UUID=b33412ee-1706-4621-a40f-7f80b0c0d754 ro single-b33412ee-1706-4621-a40f-7f80b0c0d754' {
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2  b33412ee-1706-4621-a40f-7f80b0c0d754
		else
		  search --no-floppy --fs-uuid --set=root b33412ee-1706-4621-a40f-7f80b0c0d754
		fi
		linux /boot/vmlinuz-4.9.0-13-amd64 root=UUID=b33412ee-1706-4621-a40f-7f80b0c0d754 ro single
		initrd /boot/initrd.img-4.9.0-13-amd64
	}
}

### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###[\code]
Ostatnio zmieniony 17 stycznia 2021, 16:31 przez Matrixx, łącznie zmieniany 6 razy.
hepa
Beginner
Posty: 108
Rejestracja: 07 maja 2018, 19:56

Re: Po swiezej instalacji Debiana - BIOS nie widzi dysku SATA.

Post autor: hepa »

Ciekawa sprawa...
Ja bym zrobił pełny 'shred' pod Linuxem, ale na innym kompie, na którym ten dysk jest widoczny.
Jak to nie pomoże to ja nie wiem.
Matrixx
Beginner
Posty: 235
Rejestracja: 03 maja 2016, 16:30

Re: Po swiezej instalacji Debiana - BIOS nie widzi dysku SATA.

Post autor: Matrixx »

Moze to z powodu, ze tablica partycji jest MBR a nie GPT ??

Kod: Zaznacz cały

gdisk /dev/sda
[code]GPT fdisk (gdisk) version 0.8.10

Partition table scan:
  MBR: MBR only
  BSD: not present
  APM: not present
  GPT: not present


***************************************************************
Found invalid GPT and valid MBR; converting MBR to GPT format
in memory. THIS OPERATION IS POTENTIALLY DESTRUCTIVE! Exit by
typing 'q' if you don't want to convert your MBR partitions
to GPT format!
***************************************************************

[\code]
Matrixx
Beginner
Posty: 235
Rejestracja: 03 maja 2016, 16:30

Re: Po swiezej instalacji Debiana - BIOS nie widzi dysku SATA.

Post autor: Matrixx »

Instalowalem wielokrotnie sposobem z plytki instalacyjnej i nigdy nie mialem takich problemow.
Czytam teraz Morfika:
https://morfikov.github.io/post/jak-prz ... -efi-uefi/
Sam juz nie wiem co myslec?? Help.
Awatar użytkownika
saturno
Junior Member
Posty: 741
Rejestracja: 08 lipca 2008, 20:04

Re: Po swiezej instalacji Debiana - BIOS nie widzi dysku SATA.

Post autor: saturno »

1. Napięcia zasilacz są poprawne?
2. SMART dysku jest prawidłowy?
Matrixx
Beginner
Posty: 235
Rejestracja: 03 maja 2016, 16:30

Re: Po swiezej instalacji Debiana - BIOS nie widzi dysku SATA.

Post autor: Matrixx »

Podpiolem 3 rozne dyski - na wszystkich ten sam problem.
Dysk jest zasilany bo wibruje, napiecia nie mierzylem, musze to zaraz zrobic.

Sprawdzilem na Molex-4pin.
- linia 5V = 5.04V.
-linia 12V = 12.23 V.
ODPOWIEDZ