[+]Debian10 nie montuje telefonu z Androidem
: 25 sierpnia 2019, 18:21
Witam.
Ta przypadłość występuje na trzech komputerach po czystej instalacji Debian10 - w Debian9 wszystko działało bez problemu - tak więc wygląda na problem jakby systemowy
Próbowałem z telefonem na Android 9 oraz 4 - nie widać różnicy.
Na Windows działa bez problemu.
================================
Po podłączeniu telefonu pojawia się on na liście podłączonych urządzeń, ale go nie montuje.
Szukając rozwiązania, instalowałem jakieś zalecane dodatki "android", ale niczego to nie zmieniło
Jest jeszcze coś takiego, jak pakiet Google SDK dla platformy Android 9. Czy może on coś pomóc ?
Ta przypadłość występuje na trzech komputerach po czystej instalacji Debian10 - w Debian9 wszystko działało bez problemu - tak więc wygląda na problem jakby systemowy
Próbowałem z telefonem na Android 9 oraz 4 - nie widać różnicy.
Na Windows działa bez problemu.
================================
Po podłączeniu telefonu pojawia się on na liście podłączonych urządzeń, ale go nie montuje.
hsurim@H61N-USB3:~$ lsusb
Bus 003 Device 004: ID 04e8:6860 Samsung Electronics Co., Ltd Galaxy series, misc. (MTP mode)
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 005: ID 1c4f:0002 SiGma Micro Keyboard TRACER Gamma Ivory
Bus 001 Device 004: ID 041e:3f19 Creative Technology, Ltd
Bus 001 Device 003: ID 09da:8090 A4Tech Co., Ltd. X-718BK Oscar Optical Gaming Mouse
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Kod: Zaznacz cały
hsurim@H61N-USB3:~$ su -
Hasło:
root@H61N-USB3:~# dmesg
[ 0.000000] Linux version 4.19.0-5-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.37-5+deb10u2 (2019-08-08)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-5-amd64 root=UUID=459d548c-0bd1-4af5-b932-3afd5bc08d77 ro quiet
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000daf3ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000daf40000-0x00000000daf82fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000daf83000-0x00000000dafbffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000dafc0000-0x00000000daffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f4000000-0x00000000f7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. H61N-USB3/H61N-USB3, BIOS F8 05/15/2012
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3292.372 MHz processor
[ 0.001807] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.001809] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.001812] last_pfn = 0x11fe00 max_arch_pfn = 0x400000000
[ 0.001815] MTRR default type: uncachable
[ 0.001816] MTRR fixed ranges enabled:
[ 0.001817] 00000-9FFFF write-back
[ 0.001817] A0000-BFFFF uncachable
[ 0.001818] C0000-D0FFF write-protect
[ 0.001819] D1000-EFFFF uncachable
[ 0.001819] F0000-FFFFF write-through
[ 0.001820] MTRR variable ranges enabled:
[ 0.001821] 0 base 000000000 mask F00000000 write-back
[ 0.001821] 1 base 0E0000000 mask FE0000000 uncachable
[ 0.001822] 2 base 0DC000000 mask FFC000000 uncachable
[ 0.001823] 3 base 0DB800000 mask FFF800000 uncachable
[ 0.001823] 4 base 100000000 mask FE0000000 write-back
[ 0.001824] 5 disabled
[ 0.001824] 6 disabled
[ 0.001824] 7 disabled
[ 0.001825] 8 disabled
[ 0.001825] 9 disabled
[ 0.002358] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.002451] e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved
[ 0.002455] last_pfn = 0xdaf40 max_arch_pfn = 0x400000000
[ 0.006955] found SMP MP-table at [mem 0x000f57a0-0x000f57af]
[ 0.019980] Base memory trampoline at [(____ptrval____)] 97000 size 24576
[ 0.019981] reserving inaccessible SNB gfx pages
[ 0.019985] BRK [0xb5201000, 0xb5201fff] PGTABLE
[ 0.019986] BRK [0xb5202000, 0xb5202fff] PGTABLE
[ 0.019987] BRK [0xb5203000, 0xb5203fff] PGTABLE
[ 0.020010] BRK [0xb5204000, 0xb5204fff] PGTABLE
[ 0.020012] BRK [0xb5205000, 0xb5205fff] PGTABLE
[ 0.020052] BRK [0xb5206000, 0xb5206fff] PGTABLE
[ 0.020076] BRK [0xb5207000, 0xb5207fff] PGTABLE
[ 0.020158] RAMDISK: [mem 0x33ba5000-0x35dc9fff]
[ 0.020164] ACPI: Early table checksum verification disabled
[ 0.023871] ACPI: RSDP 0x00000000000F7390 000014 (v00 GBT )
[ 0.023874] ACPI: RSDT 0x00000000DAF83040 000050 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.023878] ACPI: FACP 0x00000000DAF83100 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.023882] ACPI: DSDT 0x00000000DAF831C0 0046E7 (v01 GBT GBTUACPI 00001000 MSFT 04000000)
[ 0.023884] ACPI: FACS 0x00000000DAF40000 000040
[ 0.023886] ACPI: MSDM 0x00000000DAF87A00 000055 (v03 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.023888] ACPI: HPET 0x00000000DAF87AC0 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.023891] ACPI: MCFG 0x00000000DAF87B40 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.023893] ACPI: ASPT 0x00000000DAF87C00 000034 (v07 GBT PerfTune 312E3042 UTBG 01010101)
[ 0.023895] ACPI: SSPT 0x00000000DAF87C40 0022F4 (v01 GBT SsptHead 312E3042 UTBG 01010101)
[ 0.023897] ACPI: MATS 0x00000000DAF89F40 000034 (v01 GBT 00000000 00000000)
[ 0.023900] ACPI: TAMG 0x00000000DAF89FA0 00054A (v01 GBT GBT B0 5455312E BG?? 53450101)
[ 0.023902] ACPI: APIC 0x00000000DAF87900 0000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.023904] ACPI: SSDT 0x00000000DAF8A500 001EC8 (v01 INTEL PPM RCM 80000001 INTL 20061109)
[ 0.023907] ACPI: MATS 0x00000000DAF8C400 0095D0 (v01 MATS RCM 80000001 INTL 20061109)
[ 0.023914] ACPI: Local APIC address 0xfee00000
[ 0.023979] No NUMA configuration found
[ 0.023979] Faking a node at [mem 0x0000000000000000-0x000000011fdfffff]
[ 0.023982] NODE_DATA(0) allocated [mem 0x11fdf9000-0x11fdfdfff]
[ 0.024000] Zone ranges:
[ 0.024001] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.024002] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.024003] Normal [mem 0x0000000100000000-0x000000011fdfffff]
[ 0.024004] Device empty
[ 0.024004] Movable zone start for each node
[ 0.024005] Early memory node ranges
[ 0.024005] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.024006] node 0: [mem 0x0000000000100000-0x00000000daf3ffff]
[ 0.024006] node 0: [mem 0x0000000100000000-0x000000011fdfffff]
[ 0.024009] Reserved but unavailable: 100 pages
[ 0.024010] Initmem setup node 0 [mem 0x0000000000001000-0x000000011fdfffff]
[ 0.024011] On node 0 totalpages: 1027292
[ 0.024012] DMA zone: 64 pages used for memmap
[ 0.024012] DMA zone: 156 pages reserved
[ 0.024013] DMA zone: 3996 pages, LIFO batch:0
[ 0.024094] DMA32 zone: 13949 pages used for memmap
[ 0.024095] DMA32 zone: 892736 pages, LIFO batch:63
[ 0.042586] Normal zone: 2040 pages used for memmap
[ 0.042587] Normal zone: 130560 pages, LIFO batch:31
[ 0.045159] Reserving Intel graphics memory at [mem 0xdba00000-0xdf9fffff]
[ 0.045310] ACPI: PM-Timer IO Port: 0x408
[ 0.045312] ACPI: Local APIC address 0xfee00000
[ 0.045318] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.045318] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.045319] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.045319] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.045319] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[ 0.045320] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[ 0.045320] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[ 0.045321] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[ 0.045331] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.045332] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.045334] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.045335] ACPI: IRQ0 used by override.
[ 0.045335] ACPI: IRQ9 used by override.
[ 0.045337] Using ACPI (MADT) for SMP configuration information
[ 0.045338] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.045342] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.045352] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.045353] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.045354] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.045354] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.045355] PM: Registered nosave memory: [mem 0xdaf40000-0xdaf82fff]
[ 0.045356] PM: Registered nosave memory: [mem 0xdaf83000-0xdafbffff]
[ 0.045356] PM: Registered nosave memory: [mem 0xdafc0000-0xdaffffff]
[ 0.045356] PM: Registered nosave memory: [mem 0xdb000000-0xdb9fffff]
[ 0.045357] PM: Registered nosave memory: [mem 0xdba00000-0xdf9fffff]
[ 0.045357] PM: Registered nosave memory: [mem 0xdfa00000-0xf3ffffff]
[ 0.045358] PM: Registered nosave memory: [mem 0xf4000000-0xf7ffffff]
[ 0.045358] PM: Registered nosave memory: [mem 0xf8000000-0xfebfffff]
[ 0.045358] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[ 0.045360] [mem 0xdfa00000-0xf3ffffff] available for PCI devices
[ 0.045361] Booting paravirtualized kernel on bare hardware
[ 0.045363] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.129043] random: get_random_bytes called from start_kernel+0x93/0x52c with crng_init=0
[ 0.129051] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.129234] percpu: Embedded 44 pages/cpu s143256 r8192 d28776 u262144
[ 0.129240] pcpu-alloc: s143256 r8192 d28776 u262144 alloc=1*2097152
[ 0.129241] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.129257] Built 1 zonelists, mobility grouping on. Total pages: 1011083
[ 0.129258] Policy zone: Normal
[ 0.129260] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-5-amd64 root=UUID=459d548c-0bd1-4af5-b932-3afd5bc08d77 ro quiet
[ 0.132843] Calgary: detecting Calgary via BIOS EBDA area
[ 0.132845] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.143416] Memory: 3915876K/4109168K available (10252K kernel code, 1242K rwdata, 3184K rodata, 1580K init, 2296K bss, 193292K reserved, 0K cma-reserved)
[ 0.143495] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.143500] Kernel/User page tables isolation: enabled
[ 0.143532] ftrace: allocating 31828 entries in 125 pages
[ 0.153332] rcu: Hierarchical RCU implementation.
[ 0.153334] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[ 0.153334] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.155743] NR_IRQS: 33024, nr_irqs: 488, preallocated irqs: 16
[ 0.157409] Console: colour VGA+ 80x25
[ 0.157413] console [tty0] enabled
[ 0.157425] ACPI: Core revision 20180810
[ 0.157586] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.157594] hpet clockevent registered
[ 0.157598] APIC: Switch to symmetric I/O mode setup
[ 0.157987] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.177598] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2f75263f196, max_idle_ns: 440795244155 ns
[ 0.177609] Calibrating delay loop (skipped), value calculated using timer frequency.. 6584.74 BogoMIPS (lpj=13169488)
[ 0.177611] pid_max: default: 32768 minimum: 301
[ 0.177632] Security Framework initialized
[ 0.177633] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.177647] AppArmor: AppArmor initialized
[ 0.178139] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.178433] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.178454] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.178464] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.178638] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.178638] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.178642] mce: CPU supports 7 MCE banks
[ 0.178649] CPU0: Thermal monitoring enabled (TM1)
[ 0.178655] process: using mwait in idle threads
[ 0.178657] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.178658] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.178659] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.178660] Spectre V2 : Mitigation: Full generic retpoline
[ 0.178660] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.178661] Speculative Store Bypass: Vulnerable
[ 0.178687] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.178809] Freeing SMP alternatives memory: 24K
[ 0.181662] TSC deadline timer enabled
[ 0.181664] smpboot: CPU0: Intel(R) Core(TM) i3-2120 CPU @ 3.30GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[ 0.181741] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.181757] core: PEBS disabled due to CPU errata, please upgrade microcode
[ 0.181758] ... version: 3
[ 0.181759] ... bit width: 48
[ 0.181759] ... generic registers: 4
[ 0.181760] ... value mask: 0000ffffffffffff
[ 0.181760] ... max period: 00007fffffffffff
[ 0.181761] ... fixed-purpose events: 3
[ 0.181761] ... event mask: 000000070000000f
[ 0.181792] rcu: Hierarchical SRCU implementation.
[ 0.182390] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.182445] smp: Bringing up secondary CPUs ...
[ 0.182505] x86: Booting SMP configuration:
[ 0.182506] .... node #0, CPUs: #1 #2
[ 0.185719] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.185719] #3
[ 0.187902] smp: Brought up 1 node, 4 CPUs
[ 0.187902] smpboot: Max logical packages: 2
[ 0.187902] smpboot: Total of 4 processors activated (26338.97 BogoMIPS)
[ 0.189780] devtmpfs: initialized
[ 0.189780] x86/mm: Memory block size: 128MB
[ 0.189920] PM: Registering ACPI NVS region [mem 0xdaf40000-0xdaf82fff] (274432 bytes)
[ 0.189920] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.189920] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.189920] pinctrl core: initialized pinctrl subsystem
[ 0.189920] NET: Registered protocol family 16
[ 0.189920] audit: initializing netlink subsys (disabled)
[ 0.189920] audit: type=2000 audit(1566753689.032:1): state=initialized audit_enabled=0 res=1
[ 0.189920] cpuidle: using governor ladder
[ 0.189920] cpuidle: using governor menu
[ 0.189920] ACPI: bus type PCI registered
[ 0.189920] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.189920] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
[ 0.189920] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
[ 0.189920] pmd_set_huge: Cannot satisfy [mem 0xf4000000-0xf4200000] with a huge-page mapping due to MTRR override.
[ 0.189920] PCI: Using configuration type 1 for base access
[ 0.189920] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.189920] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 0.189920] mtrr: probably your BIOS does not setup all CPUs.
[ 0.189920] mtrr: corrected configuration.
[ 0.190167] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.190167] ACPI: Added _OSI(Module Device)
[ 0.190167] ACPI: Added _OSI(Processor Device)
[ 0.190167] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.190167] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.190167] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.190167] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.191169] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.195036] ACPI: Interpreter enabled
[ 0.195048] ACPI: (supports S0 S3 S4 S5)
[ 0.195048] ACPI: Using IOAPIC for interrupt routing
[ 0.195062] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.195154] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 0.197544] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.197548] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.197550] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.197694] PCI host bridge to bus 0000:00
[ 0.197696] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.197697] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.197698] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.197699] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.197700] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.197700] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfebfffff window]
[ 0.197702] pci_bus 0000:00: root bus resource [bus 00-3f]
[ 0.197707] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[ 0.197775] pci 0000:00:02.0: [8086:0102] type 00 class 0x030000
[ 0.197783] pci 0000:00:02.0: reg 0x10: [mem 0xfb800000-0xfbbfffff 64bit]
[ 0.197788] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.197791] pci 0000:00:02.0: reg 0x20: [io 0xff00-0xff3f]
[ 0.197870] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.197892] pci 0000:00:16.0: reg 0x10: [mem 0xfbfff000-0xfbfff00f 64bit]
[ 0.197959] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.198023] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.198043] pci 0000:00:1a.0: reg 0x10: [mem 0xfbffe000-0xfbffe3ff]
[ 0.198120] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.198182] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.198201] pci 0000:00:1b.0: reg 0x10: [mem 0xfbff4000-0xfbff7fff 64bit]
[ 0.198269] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.198328] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.198407] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.198476] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[ 0.198555] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.198626] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.198646] pci 0000:00:1d.0: reg 0x10: [mem 0xfbffd000-0xfbffd3ff]
[ 0.198724] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.198780] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.198878] pci 0000:00:1f.0: [8086:1c5c] type 00 class 0x060100
[ 0.199029] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[ 0.199045] pci 0000:00:1f.2: reg 0x10: [io 0xfe00-0xfe07]
[ 0.199051] pci 0000:00:1f.2: reg 0x14: [io 0xfd00-0xfd03]
[ 0.199057] pci 0000:00:1f.2: reg 0x18: [io 0xfc00-0xfc07]
[ 0.199063] pci 0000:00:1f.2: reg 0x1c: [io 0xfb00-0xfb03]
[ 0.199070] pci 0000:00:1f.2: reg 0x20: [io 0xfa00-0xfa1f]
[ 0.199076] pci 0000:00:1f.2: reg 0x24: [mem 0xfbffc000-0xfbffc7ff]
[ 0.199111] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.199164] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.199180] pci 0000:00:1f.3: reg 0x10: [mem 0xfbffb000-0xfbffb0ff 64bit]
[ 0.199198] pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f]
[ 0.199311] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[ 0.199344] pci 0000:01:00.0: reg 0x10: [io 0xee00-0xeeff]
[ 0.199376] pci 0000:01:00.0: reg 0x18: [mem 0xfbdff000-0xfbdfffff 64bit pref]
[ 0.199396] pci 0000:01:00.0: reg 0x20: [mem 0xfbdf8000-0xfbdfbfff 64bit pref]
[ 0.199508] pci 0000:01:00.0: supports D1 D2
[ 0.199508] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.199624] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.199627] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.199634] pci 0000:00:1c.0: bridge window [mem 0xfbd00000-0xfbdfffff 64bit pref]
[ 0.199683] pci 0000:02:00.0: [1b73:1009] type 00 class 0x0c0330
[ 0.199718] pci 0000:02:00.0: reg 0x10: [mem 0xfbee0000-0xfbeeffff 64bit]
[ 0.199736] pci 0000:02:00.0: reg 0x18: [mem 0xfbeff000-0xfbefffff 64bit]
[ 0.199755] pci 0000:02:00.0: reg 0x20: [mem 0xfbefe000-0xfbefefff 64bit]
[ 0.199841] pci 0000:02:00.0: supports D1
[ 0.199842] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.199930] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.199935] pci 0000:00:1c.1: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.199954] pci_bus 0000:03: extended config space not accessible
[ 0.199998] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
[ 0.200006] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.200007] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.200007] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.200008] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[ 0.200009] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
[ 0.200010] pci 0000:00:1e.0: bridge window [mem 0xdfa00000-0xfebfffff window] (subtractive decode)
[ 0.200279] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.200314] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.200348] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[ 0.200382] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.200415] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.200449] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.200483] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[ 0.200517] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[ 0.200634] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.200634] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.200634] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.200634] vgaarb: loaded
[ 0.200634] pps_core: LinuxPPS API ver. 1 registered
[ 0.200634] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.200634] PTP clock support registered
[ 0.200634] EDAC MC: Ver: 3.0.0
[ 0.200634] PCI: Using ACPI for IRQ routing
[ 0.200634] PCI: pci_cache_line_size set to 64 bytes
[ 0.200634] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
[ 0.200634] e820: reserve RAM buffer [mem 0xdaf40000-0xdbffffff]
[ 0.200634] e820: reserve RAM buffer [mem 0x11fe00000-0x11fffffff]
[ 0.201628] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.201632] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.202616] clocksource: Switched to clocksource tsc-early
[ 0.208591] VFS: Disk quotas dquot_6.6.0
[ 0.208591] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.208591] AppArmor: AppArmor Filesystem Enabled
[ 0.208591] pnp: PnP ACPI init
[ 0.208591] system 00:00: [io 0x04d0-0x04d1] has been reserved
[ 0.208591] system 00:00: [io 0x0290-0x029f] has been reserved
[ 0.208591] system 00:00: [io 0x0800-0x0805] has been reserved
[ 0.208591] system 00:00: [io 0x0290-0x0294] has been reserved
[ 0.208591] system 00:00: [io 0x0880-0x088f] has been reserved
[ 0.208591] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.208591] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.208591] system 00:02: [io 0x0400-0x04cf] has been reserved
[ 0.208591] system 00:02: [io 0x04d2-0x04ff] has been reserved
[ 0.208591] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.208591] system 00:03: [io 0x1000-0x107f] has been reserved
[ 0.208591] system 00:03: [io 0x1080-0x10ff] has been reserved
[ 0.208591] system 00:03: [io 0x1100-0x117f] has been reserved
[ 0.208591] system 00:03: [io 0x1180-0x11ff] has been reserved
[ 0.208591] system 00:03: Plug and Play ACPI device, IDs ICD0001 PNP0c02 (active)
[ 0.208591] system 00:04: [io 0x0454-0x0457] has been reserved
[ 0.208591] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.208591] system 00:05: [mem 0xf4000000-0xf7ffffff] has been reserved
[ 0.208591] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.208591] system 00:06: [mem 0x000d0a00-0x000d3fff] has been reserved
[ 0.208591] system 00:06: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.208591] system 00:06: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.208591] system 00:06: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.208591] system 00:06: [mem 0xdaf40000-0xdafbffff] could not be reserved
[ 0.208591] system 00:06: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.208591] system 00:06: [mem 0x00100000-0xdaf3ffff] could not be reserved
[ 0.208591] system 00:06: [mem 0xdafc0000-0xdaffffff] has been reserved
[ 0.208591] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.208591] system 00:06: [mem 0xfed10000-0xfed1dfff] has been reserved
[ 0.208591] system 00:06: [mem 0xfed20000-0xfed8ffff] could not be reserved
[ 0.208591] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.208591] system 00:06: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.208591] system 00:06: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.208591] system 00:06: [mem 0x000e0000-0x000effff] has been reserved
[ 0.208591] system 00:06: [mem 0x20000000-0x201fffff] could not be reserved
[ 0.208591] system 00:06: [mem 0x40000000-0x400fffff] could not be reserved
[ 0.208591] system 00:06: [mem 0xdb000000-0xdf9fffff] could not be reserved
[ 0.208591] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.208591] pnp: PnP ACPI: found 7 devices
[ 0.214958] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.214983] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.214985] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.214991] pci 0000:00:1c.0: bridge window [mem 0xfbd00000-0xfbdfffff 64bit pref]
[ 0.214996] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.215000] pci 0000:00:1c.1: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.215007] pci 0000:00:1e.0: PCI bridge to [bus 03]
[ 0.215016] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.215017] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.215018] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.215018] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[ 0.215019] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff window]
[ 0.215020] pci_bus 0000:00: resource 9 [mem 0xdfa00000-0xfebfffff window]
[ 0.215021] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.215022] pci_bus 0000:01: resource 2 [mem 0xfbd00000-0xfbdfffff 64bit pref]
[ 0.215023] pci_bus 0000:02: resource 1 [mem 0xfbe00000-0xfbefffff]
[ 0.215024] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window]
[ 0.215025] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window]
[ 0.215025] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.215026] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff window]
[ 0.215027] pci_bus 0000:03: resource 8 [mem 0xfed40000-0xfed44fff window]
[ 0.215028] pci_bus 0000:03: resource 9 [mem 0xdfa00000-0xfebfffff window]
[ 0.215079] NET: Registered protocol family 2
[ 0.215210] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
[ 0.215224] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.215272] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.215327] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.215355] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.215366] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.215409] NET: Registered protocol family 1
[ 0.215413] NET: Registered protocol family 44
[ 0.215429] pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling
[ 0.215440] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.233722] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x6c1 took 17845 usecs
[ 0.257716] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x6c1 took 23420 usecs
[ 0.257835] PCI: CLS 4 bytes, default 64
[ 0.257870] Unpacking initramfs...
[ 0.702841] Freeing initrd memory: 34964K
[ 0.702854] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.702855] software IO TLB: mapped [mem 0xd6f40000-0xdaf40000] (64MB)
[ 0.703404] Initialise system trusted keyrings
[ 0.703412] Key type blacklist registered
[ 0.703451] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[ 0.704345] zbud: loaded
[ 0.704528] pstore: using deflate compression
[ 0.851098] Key type asymmetric registered
[ 0.851100] Asymmetric key parser 'x509' registered
[ 0.851110] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.851136] io scheduler noop registered
[ 0.851136] io scheduler deadline registered
[ 0.851163] io scheduler cfq registered (default)
[ 0.851164] io scheduler mq-deadline registered
[ 0.851429] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.851438] intel_idle: MWAIT substates: 0x1120
[ 0.851438] intel_idle: v0.4.1 model 0x2A
[ 0.851553] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.851995] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.852275] Linux agpgart interface v0.103
[ 0.852307] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.852307] AMD IOMMUv2 functionality not available on this system
[ 0.852549] i8042: PNP: No PS/2 controller found.
[ 0.852549] i8042: Probing ports directly.
[ 0.886623] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
[ 0.886623] i8042: If AUX port is really absent please use the 'i8042.noaux' option
[ 1.141717] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.141890] mousedev: PS/2 mouse device common for all mice
[ 1.141935] rtc_cmos 00:01: RTC can wake from S4
[ 1.142111] rtc_cmos 00:01: registered as rtc0
[ 1.142126] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.142135] intel_pstate: Intel P-state driver initializing
[ 1.142491] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.142962] NET: Registered protocol family 10
[ 1.152900] Segment Routing with IPv6
[ 1.152931] mip6: Mobile IPv6
[ 1.152934] NET: Registered protocol family 17
[ 1.153023] mpls_gso: MPLS GSO support
[ 1.153446] microcode: sig=0x206a7, pf=0x2, revision=0x25
[ 1.153519] microcode: Microcode Update Driver: v2.2.
[ 1.153533] sched_clock: Marking stable (1151825187, 1686133)->(1162521360, -9010040)
[ 1.153814] registered taskstats version 1
[ 1.153815] Loading compiled-in X.509 certificates
[ 1.189637] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 1.189653] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'
[ 1.189668] zswap: loaded using pool lzo/zbud
[ 1.189719] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.189980] rtc_cmos 00:01: setting system clock to 2019-08-25 17:21:30 UTC (1566753690)
[ 1.191104] Freeing unused kernel image memory: 1580K
[ 1.221642] Write protecting the kernel read-only data: 16384k
[ 1.222418] Freeing unused kernel image memory: 2028K
[ 1.222741] Freeing unused kernel image memory: 912K
[ 1.235308] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.235310] x86/mm: Checking user space page tables
[ 1.242301] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.242302] Run /init as init process
[ 1.298228] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 1.298240] ACPI: Power Button [PWRB]
[ 1.298317] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.298331] ACPI: Power Button [PWRF]
[ 1.304899] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x000000000000042C-0x000000000000042D (\GP2C) (20180810/utaddress-213)
[ 1.304905] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.304932] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 1.329474] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.331209] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.340893] libphy: r8169: probed
[ 1.341331] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl, 50:e5:49:49:14:5f, XID 2c900800, IRQ 24
[ 1.341333] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.342578] ACPI: bus type USB registered
[ 1.342601] usbcore: registered new interface driver usbfs
[ 1.342617] usbcore: registered new interface driver hub
[ 1.342641] usbcore: registered new device driver usb
[ 1.343402] r8169 0000:01:00.0 enp1s0: renamed from eth0
[ 1.348416] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.348940] SCSI subsystem initialized
[ 1.349743] ehci-pci: EHCI PCI platform driver
[ 1.349874] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.349885] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.349897] ehci-pci 0000:00:1a.0: debug port 2
[ 1.353815] ehci-pci 0000:00:1a.0: cache line size of 4 is not supported
[ 1.353831] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfbffe000
[ 1.366223] libata version 3.00 loaded.
[ 1.369644] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.369683] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 1.369685] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.369686] usb usb1: Product: EHCI Host Controller
[ 1.369686] usb usb1: Manufacturer: Linux 4.19.0-5-amd64 ehci_hcd
[ 1.369687] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.369809] hub 1-0:1.0: USB hub found
[ 1.369817] hub 1-0:1.0: 2 ports detected
[ 1.369951] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 1.369957] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[ 1.370055] xhci_hcd 0000:02:00.0: hcc params 0x200073a1 hci version 0x100 quirks 0x0000000000080010
[ 1.370251] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 1.370252] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.370253] usb usb2: Product: xHCI Host Controller
[ 1.370253] usb usb2: Manufacturer: Linux 4.19.0-5-amd64 xhci-hcd
[ 1.370254] usb usb2: SerialNumber: 0000:02:00.0
[ 1.370332] hub 2-0:1.0: USB hub found
[ 1.370339] hub 2-0:1.0: 2 ports detected
[ 1.370418] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.370426] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 1.370440] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 1.370443] ehci-pci 0000:00:1d.0: debug port 2
[ 1.370443] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 4
[ 1.370446] xhci_hcd 0000:02:00.0: Host supports USB 3.0 SuperSpeed
[ 1.370468] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.370490] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[ 1.370491] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.370492] usb usb4: Product: xHCI Host Controller
[ 1.370493] usb usb4: Manufacturer: Linux 4.19.0-5-amd64 xhci-hcd
[ 1.370494] usb usb4: SerialNumber: 0000:02:00.0
[ 1.372201] ahci 0000:00:1f.2: version 3.0
[ 1.372345] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.372409] hub 4-0:1.0: USB hub found
[ 1.372420] hub 4-0:1.0: 2 ports detected
[ 1.374354] ehci-pci 0000:00:1d.0: cache line size of 4 is not supported
[ 1.374366] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbffd000
[ 1.382434] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x23 impl SATA mode
[ 1.382437] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems apst
[ 1.389631] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.389688] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 1.389690] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.389691] usb usb3: Product: EHCI Host Controller
[ 1.389692] usb usb3: Manufacturer: Linux 4.19.0-5-amd64 ehci_hcd
[ 1.389693] usb usb3: SerialNumber: 0000:00:1d.0
[ 1.389847] hub 3-0:1.0: USB hub found
[ 1.389857] hub 3-0:1.0: 2 ports detected
[ 1.406206] scsi host0: ahci
[ 1.406377] scsi host1: ahci
[ 1.406476] scsi host2: ahci
[ 1.406573] scsi host3: ahci
[ 1.406669] scsi host4: ahci
[ 1.406761] scsi host5: ahci
[ 1.406822] ata1: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc100 irq 30
[ 1.406824] ata2: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc180 irq 30
[ 1.406825] ata3: DUMMY
[ 1.406826] ata4: DUMMY
[ 1.406827] ata5: DUMMY
[ 1.406828] ata6: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc380 irq 30
[ 1.437566] [drm] Replacing VGA console driver
[ 1.437952] Console: switching to colour dummy device 80x25
[ 1.438706] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.438706] [drm] Driver supports precise vblank timestamp query.
[ 1.439220] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.563306] random: fast init done
[ 1.597743] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0
[ 1.702837] fbcon: inteldrmfb (fb0) is primary device
[ 1.709671] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.725623] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 1.729660] tsc: Refined TSC clocksource calibration: 3292.520 MHz
[ 1.729671] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2f75b1eac7a, max_idle_ns: 440795210882 ns
[ 1.729715] clocksource: Switched to clocksource tsc
[ 1.778191] Console: switching to colour frame buffer device 240x67
[ 1.801632] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.866120] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 1.866123] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.866503] hub 1-1:1.0: USB hub found
[ 1.866641] hub 1-1:1.0: 4 ports detected
[ 1.881672] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.881971] ata1.00: ATA-8: PLEXTOR PX-128M5S, 1.05, max UDMA/133
[ 1.881973] ata1.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 1.882060] usb 3-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 1.882063] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.882378] hub 3-1:1.0: USB hub found
[ 1.882388] ata1.00: configured for UDMA/133
[ 1.882613] scsi 0:0:0:0: Direct-Access ATA PLEXTOR PX-128M5 1.05 PQ: 0 ANSI: 5
[ 1.882822] hub 3-1:1.0: 6 ports detected
[ 2.153663] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[ 2.357670] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.361575] ata2.00: ATAPI: TSSTcorp CDDVDW SN-208BB, SB03, max UDMA/100
[ 2.367878] ata2.00: configured for UDMA/100
[ 2.385400] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SN-208BB SB03 PQ: 0 ANSI: 5
[ 2.418969] usb 1-1.1: New USB device found, idVendor=09da, idProduct=8090, bcdDevice= 6.06
[ 2.418972] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.418974] usb 1-1.1: Product: USB Full Speed
[ 2.418975] usb 1-1.1: Manufacturer: A4Tech
[ 2.428964] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.436193] usbcore: registered new interface driver usbhid
[ 2.436194] usbhid: USB HID core driver
[ 2.437633] input: A4Tech USB Full Speed as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:09DA:8090.0001/input/input3
[ 2.437739] hid-generic 0003:09DA:8090.0001: input,hidraw0: USB HID v1.11 Mouse [A4Tech USB Full Speed] on usb-0000:00:1a.0-1.1/input0
[ 2.438108] input: A4Tech USB Full Speed Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:09DA:8090.0002/input/input4
[ 2.497663] usb 1-1.2: new high-speed USB device number 4 using ehci-pci
[ 2.497928] input: A4Tech USB Full Speed System Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:09DA:8090.0002/input/input5
[ 2.498034] input: A4Tech USB Full Speed Consumer Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:09DA:8090.0002/input/input6
[ 2.498090] input: A4Tech USB Full Speed as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:09DA:8090.0002/input/input7
[ 2.498321] hid-generic 0003:09DA:8090.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [A4Tech USB Full Speed] on usb-0000:00:1a.0-1.1/input1
[ 2.608490] usb 1-1.2: New USB device found, idVendor=041e, idProduct=3f19, bcdDevice= 1.00
[ 2.608493] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.608495] usb 1-1.2: Product: E-MU 0204 | USB
[ 2.608496] usb 1-1.2: Manufacturer: E-MU Systems, Inc.
[ 2.608498] usb 1-1.2: SerialNumber: E-MU-2A-3F19-07DA0C1B-0E249-8740AT2A
[ 2.689661] usb 1-1.4: new low-speed USB device number 5 using ehci-pci
[ 2.736302] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.751737] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 2.751744] sd 0:0:0:0: [sda] Write Protect is off
[ 2.751746] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.751754] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.754585] sda: sda1 sda2 sda3 sda4 < sda5 >
[ 2.754893] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.794843] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.794845] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.795031] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.803500] usb 1-1.4: New USB device found, idVendor=1c4f, idProduct=0002, bcdDevice= 1.10
[ 2.803502] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.803503] usb 1-1.4: Product: USB Keykoard
[ 2.803504] usb 1-1.4: Manufacturer: SIGMACH1P
[ 2.806445] input: SIGMACH1P USB Keykoard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:1C4F:0002.0003/input/input8
[ 2.865759] hid-generic 0003:1C4F:0002.0003: input,hidraw2: USB HID v1.10 Keyboard [SIGMACH1P USB Keykoard] on usb-0000:00:1a.0-1.4/input0
[ 2.868288] input: SIGMACH1P USB Keykoard Consumer Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:1C4F:0002.0004/input/input9
[ 2.925658] input: SIGMACH1P USB Keykoard System Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:1C4F:0002.0004/input/input10
[ 2.925690] hid-generic 0003:1C4F:0002.0004: input,hidraw3: USB HID v1.10 Device [SIGMACH1P USB Keykoard] on usb-0000:00:1a.0-1.4/input1
[ 3.121146] cryptd: max_cpu_qlen set to 1000
[ 3.250033] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 3.387138] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
[ 3.401899] systemd[1]: Inserted module 'autofs4'
[ 3.421808] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 3.441784] systemd[1]: Detected architecture x86-64.
[ 3.445305] systemd[1]: Set hostname to <H61N-USB3>.
[ 3.560510] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.561832] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.561934] systemd[1]: Listening on Journal Audit Socket.
[ 3.562001] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.562095] systemd[1]: Listening on Journal Socket (/dev/log).
[ 3.562151] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 3.563260] systemd[1]: Created slice system-getty.slice.
[ 3.563361] systemd[1]: Listening on Syslog Socket.
[ 3.563450] systemd[1]: Listening on udev Kernel Socket.
[ 3.563537] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 3.586272] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[ 3.602853] lp: driver loaded but no devices found
[ 3.607233] ppdev: user-space parallel port driver
[ 3.701441] systemd-journald[223]: Received request to flush runtime journal from PID 1
[ 3.767114] iTCO_vendor_support: vendor-support=0
[ 3.776645] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 3.776683] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[ 3.794440] input: PC Speaker as /devices/platform/pcspkr/input/input11
[ 3.819882] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.819965] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 3.822203] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 3.822205] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 3.822206] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 3.822206] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 3.842447] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 3.876732] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC889: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 3.876735] snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 3.876744] snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 3.876745] snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0
[ 3.876746] snd_hda_codec_realtek hdaudioC0D2: dig-out=0x11/0x1e
[ 3.876748] snd_hda_codec_realtek hdaudioC0D2: inputs:
[ 3.876750] snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18
[ 3.876752] snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19
[ 3.876753] snd_hda_codec_realtek hdaudioC0D2: Line=0x1a
[ 3.876754] snd_hda_codec_realtek hdaudioC0D2: CD=0x1c
[ 3.890644] usbcore: registered new interface driver snd-usb-audio
[ 3.930458] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 3.931351] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 3.931404] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 3.931456] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 3.931509] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 3.931562] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 3.931619] snd_hda_intel 0000:00:1b.0: device 1458:a002 is on the power_save blacklist, forcing power_save to 0
[ 4.037794] intel_rapl: Found RAPL domain package
[ 4.037795] intel_rapl: Found RAPL domain core
[ 4.037796] intel_rapl: Found RAPL domain uncore
[ 4.157160] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 4.195888] audit: type=1400 audit(1566746493.501:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=426 comm="apparmor_parser"
[ 4.195893] audit: type=1400 audit(1566746493.501:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=426 comm="apparmor_parser"
[ 4.197101] audit: type=1400 audit(1566746493.501:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=427 comm="apparmor_parser"
[ 4.197294] audit: type=1400 audit(1566746493.501:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=425 comm="apparmor_parser"
[ 4.197298] audit: type=1400 audit(1566746493.501:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=425 comm="apparmor_parser"
[ 4.197300] audit: type=1400 audit(1566746493.501:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=425 comm="apparmor_parser"
[ 4.197776] audit: type=1400 audit(1566746493.505:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=429 comm="apparmor_parser"
[ 4.199756] audit: type=1400 audit(1566746493.505:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=428 comm="apparmor_parser"
[ 4.199760] audit: type=1400 audit(1566746493.505:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=428 comm="apparmor_parser"
[ 4.746563] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[ 4.746941] r8169 0000:01:00.0: firmware: failed to load rtl_nic/rtl8168e-3.fw (-2)
[ 4.746944] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
[ 4.746947] r8169 0000:01:00.0: Direct firmware load for rtl_nic/rtl8168e-3.fw failed with error -2
[ 4.746952] r8169 0000:01:00.0 enp1s0: unable to load firmware patch rtl_nic/rtl8168e-3.fw (-2)
[ 4.747172] RTL8211E Gigabit Ethernet r8169-100:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-100:00, irq=IGNORE)
[ 4.852136] r8169 0000:01:00.0 enp1s0: Link is Down
[ 4.852205] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[ 7.103623] r8169 0000:01:00.0 enp1s0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 7.103633] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
[ 7.653191] random: crng init done
[ 7.653195] random: 7 urandom warning(s) missed due to ratelimiting
[ 13.202696] retire_capture_urb: 7 callbacks suppressed
[ 1812.185066] usb 3-1.1: new high-speed USB device number 3 using ehci-pci
[ 1812.295176] usb 3-1.1: New USB device found, idVendor=04e8, idProduct=6860, bcdDevice= 4.00
[ 1812.295180] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1812.295181] usb 3-1.1: Product: SAMSUNG_Android
[ 1812.295183] usb 3-1.1: Manufacturer: SAMSUNG
[ 1812.295184] usb 3-1.1: SerialNumber: 42004dfa9bcdc459
[ 2330.448467] usb 3-1.1: USB disconnect, device number 3
[ 2339.640096] usb 3-1.2: new high-speed USB device number 4 using ehci-pci
[ 2339.749754] usb 3-1.2: New USB device found, idVendor=04e8, idProduct=6860, bcdDevice= 4.00
[ 2339.749757] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2339.749759] usb 3-1.2: Product: SAMSUNG_Android
[ 2339.749761] usb 3-1.2: Manufacturer: SAMSUNG
[ 2339.749762] usb 3-1.2: SerialNumber: 42004dfa9bcdc459
Jest jeszcze coś takiego, jak pakiet Google SDK dla platformy Android 9. Czy może on coś pomóc ?