[+] Jessie problem z WiFi, karta Ralink na USB

Masz problemy z siecią bądź internetem? Zapytaj tu
ww71
Beginner
Posty: 390
Rejestracja: 04 grudnia 2008, 11:44
Lokalizacja: lubelskie

Re: Jessie problem z WiFi, karta Ralink na USB

Post autor: ww71 » 01 sierpnia 2016, 17:31

Kod: Zaznacz cały

lspci -nnk
00:00.0 Host bridge [0600]: Intel Corporation 82Q963/Q965 Memory Controller Hub [8086:2990] (rev 02)
	Subsystem: Lenovo Device [17aa:100f]
00:02.0 VGA compatible controller [0300]: Intel Corporation 82Q963/Q965 Integrated Graphics Controller [8086:2992] (rev 02)
	Subsystem: Lenovo Device [17aa:100f]
	Kernel driver in use: i915
00:03.0 Communication controller [0780]: Intel Corporation 82Q963/Q965 HECI Controller [8086:2994] (rev 02)
	Subsystem: Lenovo Device [17aa:100f]
	Kernel driver in use: mei_me
00:03.2 IDE interface [0101]: Intel Corporation 82Q963/Q965 PT IDER Controller [8086:2996] (rev 02)
	Subsystem: Lenovo Device [17aa:100f]
00:03.3 Serial controller [0700]: Intel Corporation 82Q963/Q965 KT Controller [8086:2997] (rev 02)
	Subsystem: Lenovo Device [17aa:100f]
	Kernel driver in use: serial
00:19.0 Ethernet controller [0200]: Intel Corporation 82566DM Gigabit Network Connection [8086:104a] (rev 02)
	Subsystem: Lenovo Device [17aa:100f]
	Kernel driver in use: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 02)
	Subsystem: Lenovo Device [17aa:100f]
	Kernel driver in use: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 02)
	Subsystem: Lenovo Device [17aa:100f]
	Kernel driver in use: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 02)
	Subsystem: Lenovo Device [17aa:100f]
	Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 02)
	Subsystem: Lenovo Device [17aa:100f]
	Kernel driver in use: snd_hda_intel
00:1d.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 02)
	Subsystem: Lenovo Device [17aa:100f]
	Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 02)
	Subsystem: Lenovo Device [17aa:100f]
	Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 02)
	Subsystem: Lenovo Device [17aa:100f]
	Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 02)
	Subsystem: Lenovo Device [17aa:100f]
	Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev f2)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HO (ICH8DO) LPC Interface Controller [8086:2814] (rev 02)
	Subsystem: Lenovo Device [17aa:100f]
	Kernel driver in use: lpc_ich
00:1f.2 IDE interface [0101]: Intel Corporation 82801H (ICH8 Family) 4 port SATA Controller [IDE mode] [8086:2820] (rev 02)
	Subsystem: Lenovo Device [17aa:100f]
	Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 02)
	Subsystem: Lenovo Device [17aa:100f]
	Kernel driver in use: i801_smbus
00:1f.5 IDE interface [0101]: Intel Corporation 82801HR/HO/HH (ICH8R/DO/DH) 2 port SATA Controller [IDE mode] [8086:2825] (rev 02)
	Subsystem: Lenovo Device [17aa:100f]
	Kernel driver in use: ata_piix
0a:0a.0 Network controller [0280]: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card [13d0:2103] (rev 02)
	Subsystem: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card [13d0:2103]
	Kernel driver in use: b2c2_flexcop_pci

Awatar użytkownika
dedito
Moderator
Posty: 2911
Rejestracja: 18 listopada 2013, 21:07
Lokalizacja: Gliwice

Re: Jessie problem z WiFi, karta Ralink na USB

Post autor: dedito » 01 sierpnia 2016, 17:35

Pomyłka, zapomniałem, że karta jest na usb:

Kod: Zaznacz cały

lsusb -t

ww71
Beginner
Posty: 390
Rejestracja: 04 grudnia 2008, 11:44
Lokalizacja: lubelskie

Re: Jessie problem z WiFi, karta Ralink na USB

Post autor: ww71 » 01 sierpnia 2016, 17:38

Kod: Zaznacz cały

lsusb -t
/:  Bus 07.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/:  Bus 06.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
    |__ Port 2: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
    |__ Port 2: Dev 2, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M
/:  Bus 05.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/:  Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
    |__ Port 1: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
/:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/6p, 480M
    |__ Port 6: Dev 4, If 0, Class=Vendor Specific Class, Driver=, 480M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/4p, 480M

Awatar użytkownika
dedito
Moderator
Posty: 2911
Rejestracja: 18 listopada 2013, 21:07
Lokalizacja: Gliwice

Re: Jessie problem z WiFi, karta Ralink na USB

Post autor: dedito » 01 sierpnia 2016, 17:41

To jest wynik z podpiętą kartą?

ww71
Beginner
Posty: 390
Rejestracja: 04 grudnia 2008, 11:44
Lokalizacja: lubelskie

Re: Jessie problem z WiFi, karta Ralink na USB

Post autor: ww71 » 01 sierpnia 2016, 17:42

Tak.

Kod: Zaznacz cały

 lsusb
Bus 002 Device 004: ID 148f:7601 Ralink Technology, Corp. 
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 04d9:1503 Holtek Semiconductor, Inc. Shortboard Lefty
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 002: ID 09da:000a A4 Tech Co., Ltd Optical Mouse Opto 510D
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
i tu na pierwszym miejscu.
Ostatnio zmieniony 01 sierpnia 2016, 17:43 przez ww71, łącznie zmieniany 1 raz.

Awatar użytkownika
dedito
Moderator
Posty: 2911
Rejestracja: 18 listopada 2013, 21:07
Lokalizacja: Gliwice

Re: Jessie problem z WiFi, karta Ralink na USB

Post autor: dedito » 01 sierpnia 2016, 17:43

To jeszcze pokaż lsusb i dmesg.

ww71
Beginner
Posty: 390
Rejestracja: 04 grudnia 2008, 11:44
Lokalizacja: lubelskie

Re: Jessie problem z WiFi, karta Ralink na USB

Post autor: ww71 » 01 sierpnia 2016, 17:44

Kod: Zaznacz cały

dmesg
[    0.000000] Linux version 4.6.0-0.bpo.1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Debian 4.6.3-1~bpo8+1 (2016-07-13)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.6.0-0.bpo.1-amd64 root=UUID=f78a256c-052e-4505-ba80-986af29772f3 ro quiet
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000ce000-0x00000000000cffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf6affff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf6b0000-0x00000000bf6c7fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bf6c8000-0x00000000bf6cafff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bf6cb000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000123ffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: LENOVO 8811Y4U/LENOVO, BIOS 2MKT43FRS 04/01/2008
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x124000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-E3FFF uncachable
[    0.000000]   E4000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 100000000 mask FE0000000 write-back
[    0.000000]   3 base 120000000 mask FFC000000 write-back
[    0.000000]   4 base 0BF700000 mask FFFF00000 uncachable
[    0.000000]   5 base 0BF800000 mask FFF800000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: update [mem 0xbf700000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xbf6b0 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f6210-0x000f621f] mapped at [ffff8800000f6210]
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] BRK [0x01d4c000, 0x01d4cfff] PGTABLE
[    0.000000] BRK [0x01d4d000, 0x01d4dfff] PGTABLE
[    0.000000] BRK [0x01d4e000, 0x01d4efff] PGTABLE
[    0.000000] BRK [0x01d4f000, 0x01d4ffff] PGTABLE
[    0.000000] RAMDISK: [mem 0x36162000-0x370a8fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F60C0 000014 (v00 PTLTD )
[    0.000000] ACPI: RSDT 0x00000000BF6BE03B 000048 (v01 LENOVO TC-2M    00000043  LTP 00000000)
[    0.000000] ACPI: FACP 0x00000000BF6C7E2B 000074 (v01 LENOVO TC-2M    00000043 PTL  00000001)
[    0.000000] ACPI: DSDT 0x00000000BF6C12E4 006B47 (v01 LENOVO TC-2M    00000043 MSFT 0100000E)
[    0.000000] ACPI: FACS 0x00000000BF6CAFC0 000040
[    0.000000] ACPI: TCPA 0x00000000BF6C7E9F 000032 (v02 LENOVO TC-2M    00000043 PTL  00000000)
[    0.000000] ACPI: ASF! 0x00000000BF6C7ED1 000063 (v16   CETP    2METP 00000043 PTL  00000001)
[    0.000000] ACPI: MCFG 0x00000000BF6C7F34 00003C (v01 PTLTD    M2MG   00000043  LTP 00000000)
[    0.000000] ACPI: APIC 0x00000000BF6C7F70 000068 (v01 PTLTD  ? A2MC   00000043  LTP 00000000)
[    0.000000] ACPI: BOOT 0x00000000BF6C7FD8 000028 (v01 PTLTD  $SB2MBL$ 00000043  LTP 00000001)
[    0.000000] ACPI: SSDT 0x00000000BF6BF52E 00025F (v01 PmRef  Cpu0Tst  00003000 INTL 20050228)
[    0.000000] ACPI: SSDT 0x00000000BF6BF488 0000A6 (v01 PmRef  Cpu1Tst  00003000 INTL 20050228)
[    0.000000] ACPI: SSDT 0x00000000BF6BE083 001405 (v01 PmRef  CpuPm    00003000 INTL 20050228)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x0000000123ffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x123ff8000-0x123ffcfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x0000000123ffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000bf6affff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x0000000123ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000123ffffff]
[    0.000000] On node 0 totalpages: 931404
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12187 pages used for memmap
[    0.000000]   DMA32 zone: 779952 pages, LIFO batch:31
[    0.000000]   Normal zone: 2304 pages used for memmap
[    0.000000]   Normal zone: 147456 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics stolen memory at 0xbf800000-0xbfffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000cdfff]
[    0.000000] PM: Registered nosave memory: [mem 0x000ce000-0x000cffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000d0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf6b0000-0xbf6c7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf6c8000-0xbf6cafff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf6cb000-0xbfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] percpu: Embedded 33 pages/cpu @ffff880123c00000 s94808 r8192 d32168 u1048576
[    0.000000] pcpu-alloc: s94808 r8192 d32168 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 916828
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.6.0-0.bpo.1-amd64 root=UUID=f78a256c-052e-4505-ba80-986af29772f3 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3570256K/3725616K available (5940K kernel code, 1160K rwdata, 2716K rodata, 1348K init, 828K bss, 155360K reserved, 0K cma-reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2
[    0.000000] NR_IRQS:33024 nr_irqs:440 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2392.213 MHz processor
[    0.008012] Calibrating delay loop (skipped), value calculated using timer frequency.. 4784.42 BogoMIPS (lpj=9568852)
[    0.008015] pid_max: default: 32768 minimum: 301
[    0.008032] ACPI: Core revision 20160108
[    0.012621] ACPI: 4 ACPI AML tables successfully acquired and loaded

[    0.012677] Security Framework initialized
[    0.012680] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.012690] AppArmor: AppArmor disabled by boot time parameter
[    0.013046] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.014903] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.015966] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.015974] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.016509] Disabling memory control group subsystem
[    0.016551] CPU: Physical Processor ID: 0
[    0.016553] CPU: Processor Core ID: 0
[    0.016556] mce: CPU supports 6 MCE banks
[    0.016568] process: using mwait in idle threads
[    0.016573] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.016575] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.016905] Freeing SMP alternatives memory: 24K (ffffffff81c75000 - ffffffff81c7b000)
[    0.020178] ftrace: allocating 24456 entries in 96 pages
[    0.032021] smpboot: Max logical packages: 1
[    0.032026] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.032400] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.076000] APIC calibration not consistent with PM-Timer: 184ms instead of 100ms
[    0.076000] APIC delta adjusted to PM-Timer: 1661286 (3056952)
[    0.076000] smpboot: CPU0: Intel(R) Core(TM)2 CPU          6600  @ 2.40GHz (family: 0x6, model: 0xf, stepping: 0x6)
[    0.076000] Performance Events: PEBS fmt0-, 4-deep LBR, Core2 events, Intel PMU driver.
[    0.076000] core: PEBS disabled due to CPU errata
[    0.076000] ... version:                2
[    0.076000] ... bit width:              40
[    0.076000] ... generic registers:      2
[    0.076000] ... value mask:             000000ffffffffff
[    0.076000] ... max period:             000000007fffffff
[    0.076000] ... fixed-purpose events:   3
[    0.076000] ... event mask:             0000000700000003
[    0.076000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.076000] x86: Booting SMP configuration:
[    0.076000] .... node  #0, CPUs:      #1
[    0.154031] x86: Booted up 1 node, 2 CPUs
[    0.154031] smpboot: Total of 2 processors activated (9568.99 BogoMIPS)
[    0.156061] devtmpfs: initialized
[    0.156103] x86/mm: Memory block size: 128MB
[    0.157567] PM: Registering ACPI NVS region [mem 0xbf6c8000-0xbf6cafff] (12288 bytes)
[    0.157567] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.157567] pinctrl core: initialized pinctrl subsystem
[    0.157567] NET: Registered protocol family 16
[    0.168004] cpuidle: using governor ladder
[    0.180005] cpuidle: using governor menu
[    0.180047] Simple Boot Flag at 0x44 set to 0x1
[    0.180090] ACPI: bus type PCI registered
[    0.180093] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.180217] PCI: MMCONFIG for domain 0000 [bus 00-09] at [mem 0xe0000000-0xe09fffff] (base 0xe0000000)
[    0.180221] PCI: MMCONFIG at [mem 0xe0000000-0xe09fffff] reserved in E820
[    0.180230] PCI: Using configuration type 1 for base access
[    0.180428] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.180429] mtrr: probably your BIOS does not setup all CPUs.
[    0.180430] mtrr: corrected configuration.
[    0.192069] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.192077] ACPI: Added _OSI(Module Device)
[    0.192080] ACPI: Added _OSI(Processor Device)
[    0.192081] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.192083] ACPI: Added _OSI(Processor Aggregator Device)
[    0.194463] ACPI: Dynamic OEM Table Load:
[    0.194469] ACPI: SSDT 0xFFFF88011ED38800 0001DD (v01 PmRef  Cpu0Ist  00003000 INTL 20050228)
[    0.194950] ACPI: Dynamic OEM Table Load:
[    0.194955] ACPI: SSDT 0xFFFF88011ED38600 00016E (v01 PmRef  Cpu1Ist  00003000 INTL 20050228)
[    0.195346] ACPI: Interpreter enabled
[    0.195363] ACPI: (supports S0 S3 S4 S5)
[    0.195365] ACPI: Using IOAPIC for interrupt routing
[    0.195389] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.202690] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.202696] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.202702] ACPI BIOS Error (bug): \_SB.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20160108/nsarguments-189)
[    0.202761] \_SB_.PCI0 (33DB4D5B-1FF7-401C-9657-7441C03DD766): _OSC evaluation returned wrong type
[    0.202762] _OSC request data: 1 1f 0
[    0.202767] acpi PNP0A03:00: _OSC failed (AE_TYPE); disabling ASPM
[    0.202776] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-09] only partially covers this bridge
[    0.203530] PCI host bridge to bus 0000:00
[    0.203534] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.203537] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.203539] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.203541] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.203543] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.203545] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.203547] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff window]
[    0.203550] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4ffff window]
[    0.203552] pci_bus 0000:00: root bus resource [io  0x0d00-0xfdff window]
[    0.203554] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.203563] pci 0000:00:00.0: [8086:2990] type 00 class 0x060000
[    0.203684] pci 0000:00:02.0: [8086:2992] type 00 class 0x030000
[    0.203693] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd00fffff]
[    0.203703] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.203708] pci 0000:00:02.0: reg 0x20: [io  0x3430-0x3437]
[    0.203823] pci 0000:00:03.0: [8086:2994] type 00 class 0x078000
[    0.203835] pci 0000:00:03.0: reg 0x10: [mem 0xd0426000-0xd042600f 64bit]
[    0.203874] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    0.203976] pci 0000:00:03.2: [8086:2996] type 00 class 0x010185
[    0.203985] pci 0000:00:03.2: reg 0x10: [io  0x3448-0x344f]
[    0.203990] pci 0000:00:03.2: reg 0x14: [io  0x343c-0x343f]
[    0.203995] pci 0000:00:03.2: reg 0x18: [io  0x3440-0x3447]
[    0.204003] pci 0000:00:03.2: reg 0x1c: [io  0x3438-0x343b]
[    0.204008] pci 0000:00:03.2: reg 0x20: [io  0x30e0-0x30ef]
[    0.204125] pci 0000:00:03.3: [8086:2997] type 00 class 0x070002
[    0.204135] pci 0000:00:03.3: reg 0x10: [io  0x3450-0x3457]
[    0.204141] pci 0000:00:03.3: reg 0x14: [mem 0xd0224000-0xd0224fff]
[    0.204292] pci 0000:00:19.0: [8086:104a] type 00 class 0x020000
[    0.204306] pci 0000:00:19.0: reg 0x10: [mem 0xd0200000-0xd021ffff]
[    0.204315] pci 0000:00:19.0: reg 0x14: [mem 0xd0225000-0xd0225fff]
[    0.204323] pci 0000:00:19.0: reg 0x18: [io  0x3000-0x301f]
[    0.204376] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.204434] pci 0000:00:19.0: System wakeup disabled by ACPI
[    0.204483] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
[    0.204522] pci 0000:00:1a.0: reg 0x20: [io  0x3020-0x303f]
[    0.204616] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.204667] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
[    0.204705] pci 0000:00:1a.1: reg 0x20: [io  0x3040-0x305f]
[    0.204795] pci 0000:00:1a.1: System wakeup disabled by ACPI
[    0.204853] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
[    0.204870] pci 0000:00:1a.7: reg 0x10: [mem 0xd0426400-0xd04267ff]
[    0.204945] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.205003] pci 0000:00:1a.7: System wakeup disabled by ACPI
[    0.205057] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
[    0.205073] pci 0000:00:1b.0: reg 0x10: [mem 0xd0220000-0xd0223fff 64bit]
[    0.205141] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.205202] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.205252] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
[    0.205290] pci 0000:00:1d.0: reg 0x20: [io  0x3060-0x307f]
[    0.205380] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.205430] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
[    0.205468] pci 0000:00:1d.1: reg 0x20: [io  0x3080-0x309f]
[    0.205558] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.205609] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
[    0.205647] pci 0000:00:1d.2: reg 0x20: [io  0x30a0-0x30bf]
[    0.205737] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.205796] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
[    0.205813] pci 0000:00:1d.7: reg 0x10: [mem 0xd0426800-0xd0426bff]
[    0.205888] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.205947] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.205998] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.206096] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.206150] pci 0000:00:1f.0: [8086:2814] type 00 class 0x060100
[    0.206226] pci 0000:00:1f.0: can't claim BAR 13 [io  0x1000-0x107f]: address conflict with ACPI CPU throttle [io  0x1010-0x1015]
[    0.206231] pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH6 GPIO
[    0.206235] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 007f)
[    0.206241] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at c800 (mask 00ff)
[    0.206358] pci 0000:00:1f.2: [8086:2820] type 00 class 0x01018a
[    0.206370] pci 0000:00:1f.2: reg 0x10: [io  0x0000-0x0007]
[    0.206378] pci 0000:00:1f.2: reg 0x14: [io  0x0000-0x0003]
[    0.206386] pci 0000:00:1f.2: reg 0x18: [io  0x0000-0x0007]
[    0.206393] pci 0000:00:1f.2: reg 0x1c: [io  0x0000-0x0003]
[    0.206401] pci 0000:00:1f.2: reg 0x20: [io  0x3400-0x340f]
[    0.206409] pci 0000:00:1f.2: reg 0x24: [io  0x30f0-0x30ff]
[    0.206419] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.206421] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.206423] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.206425] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.206446] pci 0000:00:1f.2: PME# supported from D3hot
[    0.206546] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
[    0.206558] pci 0000:00:1f.3: reg 0x10: [mem 0xd0426c00-0xd0426cff]
[    0.206583] pci 0000:00:1f.3: reg 0x20: [io  0x30c0-0x30df]
[    0.206697] pci 0000:00:1f.5: [8086:2825] type 00 class 0x010185
[    0.206709] pci 0000:00:1f.5: reg 0x10: [io  0x3480-0x3487]
[    0.206717] pci 0000:00:1f.5: reg 0x14: [io  0x3474-0x3477]
[    0.206724] pci 0000:00:1f.5: reg 0x18: [io  0x3478-0x347f]
[    0.206732] pci 0000:00:1f.5: reg 0x1c: [io  0x3470-0x3473]
[    0.206740] pci 0000:00:1f.5: reg 0x20: [io  0x3420-0x342f]
[    0.206747] pci 0000:00:1f.5: reg 0x24: [io  0x3410-0x341f]
[    0.206776] pci 0000:00:1f.5: PME# supported from D3hot
[    0.206929] pci 0000:0a:0a.0: [13d0:2103] type 00 class 0x028000
[    0.206943] pci 0000:0a:0a.0: reg 0x10: [mem 0xd0100000-0xd010ffff]
[    0.206953] pci 0000:0a:0a.0: reg 0x14: [io  0x4000-0x401f]
[    0.207070] pci 0000:00:1e.0: PCI bridge to [bus 0a] (subtractive decode)
[    0.207074] pci 0000:00:1e.0:   bridge window [io  0x4000-0x4fff]
[    0.207077] pci 0000:00:1e.0:   bridge window [mem 0xd0100000-0xd01fffff]
[    0.207083] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.207085] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.207088] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[    0.207090] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.207092] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[    0.207094] pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[    0.207096] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xdfffffff window] (subtractive decode)
[    0.207098] pci 0000:00:1e.0:   bridge window [mem 0xfed40000-0xfed4ffff window] (subtractive decode)
[    0.207101] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xfdff window] (subtractive decode)
[    0.207351] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12)
[    0.207417] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12)
[    0.207481] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[    0.207545] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.207613] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.207679] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.207747] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 7 9 10 11 12)
[    0.207813] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.208834] ACPI: Enabled 1 GPEs in block 00 to 1F
[    0.208933] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.208933] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.208933] vgaarb: loaded
[    0.208933] vgaarb: bridge control possible 0000:00:02.0
[    0.208933] PCI: Using ACPI for IRQ routing
[    0.208933] PCI: pci_cache_line_size set to 64 bytes
[    0.208933] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
[    0.208933] e820: reserve RAM buffer [mem 0xbf6b0000-0xbfffffff]
[    0.208933] clocksource: Switched to clocksource refined-jiffies
[    0.218600] VFS: Disk quotas dquot_6.6.0
[    0.218632] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.218794] pnp: PnP ACPI init
[    0.219090] system 00:00: [io  0x04d0-0x04d1] has been reserved
[    0.219094] system 00:00: [io  0x0500-0x057f] has been reserved
[    0.219096] system 00:00: [io  0x0800-0x080f] has been reserved
[    0.219099] system 00:00: [io  0x1000-0x107f] could not be reserved
[    0.219102] system 00:00: [io  0x1180-0x11bf] has been reserved
[    0.219104] system 00:00: [io  0xc800-0xc87f] has been reserved
[    0.219107] system 00:00: [io  0xc880-0xc8ff] has been reserved
[    0.219109] system 00:00: [io  0xfe00] has been reserved
[    0.219112] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.219114] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.219116] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.219119] system 00:00: [mem 0xfed50000-0xfed8ffff] has been reserved
[    0.219121] system 00:00: [mem 0xfef00000-0xfeffffff] has been reserved
[    0.219126] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.219198] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.219555] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.219792] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.219995] pnp 00:04: [dma 2]
[    0.220050] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.220425] pnp 00:05: [dma 1]
[    0.220491] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.220801] pnp 00:06: Plug and Play ACPI device, IDs ATM1200 PNP0c31 (active)
[    0.221053] pnp: PnP ACPI: found 7 devices
[    0.227792] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.227805] clocksource: Switched to clocksource acpi_pm
[    0.227825] pci 0000:00:1f.0: BAR 13: [io  size 0x0080] has bogus alignment
[    0.227830] pci 0000:00:1e.0: PCI bridge to [bus 0a]
[    0.227834] pci 0000:00:1e.0:   bridge window [io  0x4000-0x4fff]
[    0.227839] pci 0000:00:1e.0:   bridge window [mem 0xd0100000-0xd01fffff]
[    0.227847] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.227849] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff window]
[    0.227851] pci_bus 0000:00: resource 6 [mem 0x000d0000-0x000d3fff window]
[    0.227854] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff window]
[    0.227856] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff window]
[    0.227858] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff window]
[    0.227860] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xdfffffff window]
[    0.227862] pci_bus 0000:00: resource 11 [mem 0xfed40000-0xfed4ffff window]
[    0.227864] pci_bus 0000:00: resource 12 [io  0x0d00-0xfdff window]
[    0.227867] pci_bus 0000:0a: resource 0 [io  0x4000-0x4fff]
[    0.227869] pci_bus 0000:0a: resource 1 [mem 0xd0100000-0xd01fffff]
[    0.227871] pci_bus 0000:0a: resource 4 [io  0x0000-0x0cf7 window]
[    0.227873] pci_bus 0000:0a: resource 5 [mem 0x000a0000-0x000bffff window]
[    0.227875] pci_bus 0000:0a: resource 6 [mem 0x000d0000-0x000d3fff window]
[    0.227877] pci_bus 0000:0a: resource 7 [mem 0x000d4000-0x000d7fff window]
[    0.227879] pci_bus 0000:0a: resource 8 [mem 0x000d8000-0x000dbfff window]
[    0.227881] pci_bus 0000:0a: resource 9 [mem 0x000dc000-0x000dffff window]
[    0.227883] pci_bus 0000:0a: resource 10 [mem 0xc0000000-0xdfffffff window]
[    0.227886] pci_bus 0000:0a: resource 11 [mem 0xfed40000-0xfed4ffff window]
[    0.227888] pci_bus 0000:0a: resource 12 [io  0x0d00-0xfdff window]
[    0.227940] NET: Registered protocol family 2
[    0.227998] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.227998] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.227998] TCP: Hash tables configured (established 32768 bind 32768)
[    0.227998] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.227998] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.227998] NET: Registered protocol family 1
[    0.227998] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.227998] PCI: CLS 32 bytes, default 64
[    0.227998] Unpacking initramfs...
[    0.550026] Freeing initrd memory: 15644K (ffff880036162000 - ffff8800370a9000)
[    0.550043] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.550045] software IO TLB [mem 0xbb6b0000-0xbf6b0000] (64MB) mapped at [ffff8800bb6b0000-ffff8800bf6affff]
[    0.550607] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.550654] audit: initializing netlink subsys (disabled)
[    0.550681] audit: type=2000 audit(1470071727.547:1): initialized
[    0.551100] Initialise system trusted keyring
[    0.551250] workingset: timestamp_bits=37 max_order=20 bucket_order=0
[    0.551274] zbud: loaded
[    0.612447] Key type asymmetric registered
[    0.612451] Asymmetric key parser 'x509' registered
[    0.612477] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    0.612521] io scheduler noop registered
[    0.612525] io scheduler deadline registered
[    0.612540] io scheduler cfq registered (default)
[    0.612626] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.612635] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.612657] intel_idle: does not run on family 6 model 15
[    0.612702] GHES: HEST is not enabled!
[    0.612788] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.633150] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.653555] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.674029] 0000:00:03.3: ttyS2 at I/O 0x3450 (irq = 17, base_baud = 115200) is a 16550A
[    0.674174] Linux agpgart interface v0.103
[    0.674283] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    0.674284] AMD IOMMUv2 functionality not available on this system
[    0.674503] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.677153] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.677159] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.677324] mousedev: PS/2 mouse device common for all mice
[    0.677381] rtc_cmos 00:01: RTC can wake from S4
[    0.677507] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    0.677528] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram
[    0.677544] ledtrig-cpu: registered to indicate activity on CPUs
[    0.678095] NET: Registered protocol family 10
[    0.678330] mip6: Mobile IPv6
[    0.678334] NET: Registered protocol family 17
[    0.678340] mpls_gso: MPLS GSO support
[    0.678518] microcode: CPU0 sig=0x6f6, pf=0x1, revision=0xc6
[    0.678527] microcode: CPU1 sig=0x6f6, pf=0x1, revision=0xc6
[    0.678569] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.678759] registered taskstats version 1
[    0.678773] Loading compiled-in X.509 certificates
[    0.680421] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
[    0.680783] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
[    0.680807] zswap: loaded using pool lzo/zbud
[    0.681152] rtc_cmos 00:01: setting system clock to 2016-08-01 17:15:28 UTC (1470071728)
[    0.681231] PM: Hibernation image not present or could not be loaded.
[    0.682673] Freeing unused kernel memory: 1348K (ffffffff81b24000 - ffffffff81c75000)
[    0.682675] Write protecting the kernel read-only data: 10240k
[    0.682889] Freeing unused kernel memory: 188K (ffff8800015d1000 - ffff880001600000)
[    0.686671] Freeing unused kernel memory: 1380K (ffff8800018a7000 - ffff880001a00000)
[    0.695657] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.705491] systemd-udevd[76]: starting version 215
[    0.705792] random: systemd-udevd urandom read with 1 bits of entropy available
[    0.717351] scsi_mod: module verification failed: signature and/or required key missing - tainting kernel
[    0.718567] SCSI subsystem initialized
[    0.719239] ACPI: bus type USB registered
[    0.719272] usbcore: registered new interface driver usbfs
[    0.719287] usbcore: registered new interface driver hub
[    0.720984] pps_core: LinuxPPS API ver. 1 registered
[    0.720987] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.721223] PTP clock support registered
[    0.722070] usbcore: registered new device driver usb
[    0.722679] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.723672] ehci-pci: EHCI PCI platform driver
[    0.723881] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    0.723891] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.723904] ehci-pci 0000:00:1a.7: debug port 1
[    0.727821] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[    0.728192] ehci-pci 0000:00:1a.7: irq 16, io mem 0xd0426400
[    0.728587] uhci_hcd: USB Universal Host Controller Interface driver
[    0.729655] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    0.729657] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.730904] libata version 3.00 loaded.
[    0.737528] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    0.740032] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.740116] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.740120] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.740122] usb usb1: Product: EHCI Host Controller
[    0.740124] usb usb1: Manufacturer: Linux 4.6.0-0.bpo.1-amd64 ehci_hcd
[    0.740126] usb usb1: SerialNumber: 0000:00:1a.7
[    0.740283] hub 1-0:1.0: USB hub found
[    0.740293] hub 1-0:1.0: 4 ports detected
[    0.740610] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.740617] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.740629] ehci-pci 0000:00:1d.7: debug port 1
[    0.744541] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[    0.744686] ehci-pci 0000:00:1d.7: irq 16, io mem 0xd0426800
[    0.755634] FDC 0 is a post-1991 82077
[    0.756022] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.756065] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.756068] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.756070] usb usb2: Product: EHCI Host Controller
[    0.756072] usb usb2: Manufacturer: Linux 4.6.0-0.bpo.1-amd64 ehci_hcd
[    0.756074] usb usb2: SerialNumber: 0000:00:1d.7
[    0.756210] hub 2-0:1.0: USB hub found
[    0.756218] hub 2-0:1.0: 6 ports detected
[    0.756540] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.756547] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.756555] uhci_hcd 0000:00:1a.0: detected 2 ports
[    0.756573] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00003020
[    0.756626] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.756629] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.756631] usb usb3: Product: UHCI Host Controller
[    0.756633] usb usb3: Manufacturer: Linux 4.6.0-0.bpo.1-amd64 uhci_hcd
[    0.756635] usb usb3: SerialNumber: 0000:00:1a.0
[    0.756761] hub 3-0:1.0: USB hub found
[    0.756771] hub 3-0:1.0: 2 ports detected
[    0.757003] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.757010] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.757017] uhci_hcd 0000:00:1a.1: detected 2 ports
[    0.757042] uhci_hcd 0000:00:1a.1: irq 17, io base 0x00003040
[    0.757106] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.757109] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.757111] usb usb4: Product: UHCI Host Controller
[    0.757113] usb usb4: Manufacturer: Linux 4.6.0-0.bpo.1-amd64 uhci_hcd
[    0.757115] usb usb4: SerialNumber: 0000:00:1a.1
[    0.757247] hub 4-0:1.0: USB hub found
[    0.757256] hub 4-0:1.0: 2 ports detected
[    0.757579] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.757586] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    0.757593] uhci_hcd 0000:00:1d.0: detected 2 ports
[    0.757610] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00003060
[    0.757666] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.757669] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.757671] usb usb5: Product: UHCI Host Controller
[    0.757673] usb usb5: Manufacturer: Linux 4.6.0-0.bpo.1-amd64 uhci_hcd
[    0.757675] usb usb5: SerialNumber: 0000:00:1d.0
[    0.757911] hub 5-0:1.0: USB hub found
[    0.757921] hub 5-0:1.0: 2 ports detected
[    0.758154] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.758161] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    0.758168] uhci_hcd 0000:00:1d.1: detected 2 ports
[    0.758186] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00003080
[    0.758240] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    0.758243] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.758245] usb usb6: Product: UHCI Host Controller
[    0.758247] usb usb6: Manufacturer: Linux 4.6.0-0.bpo.1-amd64 uhci_hcd
[    0.758249] usb usb6: SerialNumber: 0000:00:1d.1
[    0.758379] hub 6-0:1.0: USB hub found
[    0.758387] hub 6-0:1.0: 2 ports detected
[    0.758628] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.758635] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    0.758641] uhci_hcd 0000:00:1d.2: detected 2 ports
[    0.758665] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000030a0
[    0.758721] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    0.758724] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.758726] usb usb7: Product: UHCI Host Controller
[    0.758728] usb usb7: Manufacturer: Linux 4.6.0-0.bpo.1-amd64 uhci_hcd
[    0.758730] usb usb7: SerialNumber: 0000:00:1d.2
[    0.758862] hub 7-0:1.0: USB hub found
[    0.758872] hub 7-0:1.0: 2 ports detected
[    0.759143] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    1.078285] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:16:41:eb:f4:36
[    1.078289] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    1.078311] e1000e 0000:00:19.0 eth0: MAC: 6, PHY: 6, PBA No: FFFFFF-0FF
[    1.078490] ata_piix 0000:00:1f.2: version 2.13
[    1.078627] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    1.124056] usb 2-6: new high-speed USB device number 3 using ehci-pci
[    1.196030] usb 6-2: new low-speed USB device number 2 using uhci_hcd
[    1.196041] usb 4-1: new low-speed USB device number 2 using uhci_hcd
[    1.233074] scsi host0: ata_piix
[    1.233197] scsi host1: ata_piix
[    1.233266] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3400 irq 14
[    1.233270] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3408 irq 15
[    1.233399] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    1.267239] usb 2-6: New USB device found, idVendor=148f, idProduct=7601
[    1.267244] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.267248] usb 2-6: Product: 802.11 n WLAN
[    1.267251] usb 2-6: Manufacturer: MediaTek
[    1.267254] usb 2-6: SerialNumber: 1.0
[    1.369104] usb 4-1: New USB device found, idVendor=09da, idProduct=000a
[    1.369109] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.369113] usb 4-1: Product: PS/2+USB Mouse
[    1.369116] usb 4-1: Manufacturer: A4Tech
[    1.383200] hidraw: raw HID events driver (C) Jiri Kosina
[    1.388921] scsi host2: ata_piix
[    1.389061] scsi host3: ata_piix
[    1.389135] ata3: SATA max UDMA/133 cmd 0x3480 ctl 0x3474 bmdma 0x3420 irq 18
[    1.389139] ata4: SATA max UDMA/133 cmd 0x3478 ctl 0x3470 bmdma 0x3428 irq 18
[    1.395169] usbcore: registered new interface driver usbhid
[    1.395172] usbhid: USB HID core driver
[    1.548041] tsc: Refined TSC clocksource calibration: 2392.257 MHz
[    1.548047] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x227ba4f0753, max_idle_ns: 440795282290 ns
[    1.651088] usb 6-2: New USB device found, idVendor=04d9, idProduct=1503
[    1.651093] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.651097] usb 6-2: Product: USB Keyboard
[    1.651099] usb 6-2: Manufacturer:  
[    1.709668] ata4: SATA link down (SStatus 0 SControl 300)
[    1.720281] ata3: SATA link down (SStatus 0 SControl 300)
[    1.786299] input:   USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0/0003:04D9:1503.0002/input/input3
[    1.840245] hid-generic 0003:04D9:1503.0002: input,hidraw0: USB HID v1.10 Keyboard [  USB Keyboard] on usb-0000:00:1d.1-2/input0
[    1.853173] input:   USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.1/0003:04D9:1503.0003/input/input4
[    1.908133] hid-generic 0003:04D9:1503.0003: input,hidraw1: USB HID v1.10 Device [  USB Keyboard] on usb-0000:00:1d.1-2/input1
[    2.008094] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.008106] ata2.01: SATA link down (SStatus 0 SControl 300)
[    2.008254] ata1.00: SATA link down (SStatus 0 SControl 300)
[    2.008276] ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.019077] ata2.00: ATA-8: WDC WD1600AAJS-60WAA0, 58.01D58, max UDMA/100
[    2.019080] ata2.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.023615] ata2.00: configured for UDMA/100
[    2.036156] ata1.01: ATAPI: HL-DT-ST DVDRAM GH10N, EV03, max UDMA/100
[    2.056157] ata1.01: configured for UDMA/100
[    2.167287] scsi 0:0:1:0: CD-ROM            HL-DT-ST DVDRAM GH10N     EV03 PQ: 0 ANSI: 5
[    2.174053] scsi 1:0:0:0: Direct-Access     ATA      WDC WD1600AAJS-6 1D58 PQ: 0 ANSI: 5
[    2.317320] sr 0:0:1:0: [sr0] scsi3-mmc drive: 0x/0x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.317324] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.317624] sr 0:0:1:0: Attached scsi CD-ROM sr0
[    2.317750] sd 1:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    2.317806] sd 1:0:0:0: [sda] Write Protect is off
[    2.317809] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.317833] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.318234] sr 0:0:1:0: Attached scsi generic sg0 type 5
[    2.318280] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    2.392996]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
[    2.393624] sd 1:0:0:0: [sda] Attached SCSI disk
[    2.548126] clocksource: Switched to clocksource tsc
[    3.078986] PM: Starting manual resume from disk
[    3.078991] PM: Hibernation image partition 8:8 present
[    3.078993] PM: Looking for hibernation image.
[    3.096806] PM: Image not found (code -22)
[    3.096809] PM: Hibernation image not present or could not be loaded.
[    3.425151] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[    3.979181] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
[    4.110953] random: nonblocking pool is initialized
[    5.735432] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    6.229490] lp: driver loaded but no devices found
[    6.322931] ppdev: user-space parallel port driver
[    6.342470] parport_pc 00:05: reported by Plug and Play ACPI
[    6.342535] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[    6.436166] lp0: using parport0 (interrupt-driven).
[    6.546903] fuse init (API version 7.24)
[    6.663025] systemd-udevd[197]: starting version 215
[    7.796313] tpm_tis 00:06: 1.2 TPM (device-id 0x3202, rev-id 5)
[    7.940160] tpm_tis 00:06: TPM is disabled/deactivated (0x6)
[    8.023245] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/PNP0C0C:00/input/input5
[    8.023252] ACPI: Power Button [PWRB]
[    8.023315] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[    8.023318] ACPI: Power Button [PWRF]
[    8.267407] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[    8.324023] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
[    8.324186] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    8.383925] ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102F conflicts with OpRegion 0x0000000000001000-0x000000000000102F (\_SB.PCI0.LPC0.PMIO) (20160108/utaddress-255)
[    8.383933] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.383937] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011AF conflicts with OpRegion 0x0000000000001180-0x00000000000011AF (\_SB.PCI0.LPC0.GPOX) (20160108/utaddress-255)
[    8.383941] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.383974] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    8.532513] input: PC Speaker as /devices/platform/pcspkr/input/input7
[    8.642257] snd_hda_codec_analog hdaudioC0D2: autoconfig for AD1983: line_outs=1 (0x5/0x0/0x0/0x0/0x0) type:line
[    8.642261] snd_hda_codec_analog hdaudioC0D2:    speaker_outs=1 (0x7/0x0/0x0/0x0/0x0)
[    8.642264] snd_hda_codec_analog hdaudioC0D2:    hp_outs=1 (0x6/0x0/0x0/0x0/0x0)
[    8.642266] snd_hda_codec_analog hdaudioC0D2:    mono: mono_out=0x0
[    8.642268] snd_hda_codec_analog hdaudioC0D2:    inputs:
[    8.642270] snd_hda_codec_analog hdaudioC0D2:      Mic=0x8
[    8.642273] snd_hda_codec_analog hdaudioC0D2:      Line=0x9
[    8.646294] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    8.646971] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    8.647103] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    8.647234] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    8.647365] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    8.724240] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
[    8.782406] flexcop-pci: will use the HW PID filter.
[    8.782409] flexcop-pci: card revision 2
[    8.796161] DVB: registering new adapter (FlexCop Digital TV device)
[    8.797932] b2c2-flexcop: MAC address = 00:d0:d7:0d:bb:93
[    8.798354] CX24123: cx24123_i2c_readreg: reg=0x0 (error=-121)
[    8.798388] CX24123: wrong demod revision: 87
[    9.030784] Adding 975868k swap on /dev/sda8.  Priority:-1 extents:1 across:975868k FS
[    9.130152] iTCO_vendor_support: vendor-support=0
[    9.166597] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    9.166640] iTCO_wdt: Found a ICH8DO TCO device (Version=2, TCOBASE=0x1060)
[    9.166793] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    9.337150] b2c2-flexcop: found 'ST STV0299 DVB-S' .
[    9.337158] b2c2_flexcop_pci 0000:0a:0a.0: DVB: registering adapter 0 frontend 0 (ST STV0299 DVB-S)...
[    9.337224] b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S rev 2.6' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
[    9.355203] [drm] Initialized drm 1.1.0 20060810
[    9.699892] kvm: disabled by bios
[    9.725030] kvm: disabled by bios
[    9.778139] coretemp coretemp.0: Using relative temperature scale!
[    9.778153] coretemp coretemp.0: Using relative temperature scale!
[    9.927270] pci 0000:00:00.0: Intel 965Q Chipset
[    9.927288] pci 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[    9.928063] pci 0000:00:00.0: detected 8192K stolen memory
[    9.928111] [drm] Memory usable by graphics device = 512M
[    9.928115] [drm] Replacing VGA console driver
[    9.928843] Console: switching to colour dummy device 80x25
[    9.934128] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    9.934131] [drm] Driver supports precise vblank timestamp query.
[    9.934471] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    9.942667] [drm] RC6 disabled, disabling runtime PM support
[    9.942674] [drm] initialized overlay support
[    9.942720] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20160108/video-1241)
[    9.942725] ACPI: Video Device [IGD0] (multi-head: yes  rom: no  post: no)
[    9.942848] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input13
[    9.942930] [drm] Initialized i915 1.6.0 20160229 for 0000:00:02.0 on minor 0
[   10.018093] [drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 117
[   10.018101] Raw EDID:
[   10.018104]  	00 ff ff ff ff ff ff 00 1e 6d 6f 4b 4c 0b 01 00
[   10.018108]  	0b 12 01 03 6a 29 1a 78 ff ff ff ff ff ff ff ff
[   10.018111]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   10.018114]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   10.018116]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   10.018119]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   10.018122]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   10.018125]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   10.086250] fbcon: inteldrmfb (fb0) is primary device
[   10.193575] Console: switching to colour frame buffer device 180x56
[   10.196786] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   10.574861] input: A4Tech PS/2+USB Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/0003:09DA:000A.0001/input/input14
[   10.575011] a4tech 0003:09DA:000A.0001: input,hidraw2: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-0000:00:1a.1-1/input0
[   11.888426] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[   12.264041] usb 2-6: reset high-speed USB device number 3 using ehci-pci
[   12.398738] mt7601u 2-6:1.0: ASIC revision: 76010001 MAC revision: 76010500
[   12.451556] mt7601u 2-6:1.0: firmware: failed to load mt7601u.bin (-2)
[   12.451607] mt7601u 2-6:1.0: Direct firmware load for mt7601u.bin failed with error -2
[   12.452269] mt7601u: probe of 2-6:1.0 failed with error -2
[   12.452350] usbcore: registered new interface driver mt7601u
[   12.513956] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[   12.692999] systemd-journald[190]: Received request to flush runtime journal from PID 1
[   13.551385] RPC: Registered named UNIX socket transport module.
[   13.551389] RPC: Registered udp transport module.
[   13.551391] RPC: Registered tcp transport module.
[   13.551392] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   13.586791] FS-Cache: Loaded
[   13.625625] FS-Cache: Netfs 'nfs' registered for caching
[   13.643126] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   15.023981] ip_tables: (C) 2000-2006 Netfilter Core Team
[   15.120126] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   21.060872] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[   21.060982] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
[   39.222095] [drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 130
[   39.222101] Raw EDID:
[   39.222105]  	00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff
[   39.222107]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   39.222109]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   39.222111]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   39.222113]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   39.222115]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   39.222117]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   39.222119]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   39.838108] [drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 72
[   39.838114] Raw EDID:
[   39.838117]  	00 ff ff ff ff ff ff 00 1e 6d 6f 4b 4c 0b 01 00
[   39.838119]  	0b 12 01 03 6a 29 1a 78 ea a2 a5 a3 57 4c 9d 25
[   39.838121]  	11 50 54 a7 6f 80 95 0f 81 80 81 40 71 4f 01 01
[   39.838124]  	01 01 01 01 01 01 9a 29 a0 d0 51 84 22 30 50 98
[   39.838126]  	36 7f ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   39.838128]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   39.838130]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   39.838131]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   39.902084] [drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 41
[   39.902088] Raw EDID:
[   39.902090]  	00 ff ff ff ff ff ff 00 1e 6d 6f 4b 4c 0b 01 00
[   39.902092]  	0b 12 01 03 6a 29 1a 78 ea a2 a5 a3 57 4c 9d 25
[   39.902095]  	11 50 54 a7 6f 80 95 0f 81 80 81 40 71 4f 01 01
[   39.902097]  	01 01 01 01 01 01 9a 29 a0 d0 51 84 22 30 50 98
[   39.902099]  	36 00 98 ff 10 00 00 1c 00 00 00 fd 00 38 4b 1e
[   39.902101]  	53 0e 00 0a 20 20 20 20 20 20 00 00 00 fc 00 57
[   39.902102]  	31 39 34 32 0a 20 20 20 20 ff ff ff ff ff ff ff
[   39.902104]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  868.190067] e1000e: eth0 NIC Link is Down
[  868.680147] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  870.016864] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[  870.016975] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
[  870.017011] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  881.326084] e1000e: eth0 NIC Link is Down
[  881.808180] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  882.082085] e1000e: eth0 NIC Link is Down
[  882.588145] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  883.650085] e1000e: eth0 NIC Link is Down
[  884.124141] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  884.394089] e1000e: eth0 NIC Link is Down
[  884.912155] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  886.256883] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[  886.256994] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
[ 1049.882669] usb 2-6: USB disconnect, device number 3
[ 1053.004016] usb 1-4: new high-speed USB device number 3 using ehci-pci
[ 1053.147016] usb 1-4: New USB device found, idVendor=148f, idProduct=7601
[ 1053.147021] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1053.147024] usb 1-4: Product: 802.11 n WLAN
[ 1053.147027] usb 1-4: Manufacturer: MediaTek
[ 1053.147030] usb 1-4: SerialNumber: 1.0
[ 1053.260014] usb 1-4: reset high-speed USB device number 3 using ehci-pci
[ 1053.394763] mt7601u 1-4:1.0: ASIC revision: 76010001 MAC revision: 76010500
[ 1053.396149] mt7601u 1-4:1.0: firmware: failed to load mt7601u.bin (-2)
[ 1053.396154] mt7601u 1-4:1.0: Direct firmware load for mt7601u.bin failed with error -2
[ 1053.396793] mt7601u: probe of 1-4:1.0 failed with error -2
[ 1101.377342] usb 1-4: USB disconnect, device number 3
[ 1104.612015] usb 2-6: new high-speed USB device number 4 using ehci-pci
[ 1104.755059] usb 2-6: New USB device found, idVendor=148f, idProduct=7601
[ 1104.755065] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1104.755069] usb 2-6: Product: 802.11 n WLAN
[ 1104.755072] usb 2-6: Manufacturer: MediaTek
[ 1104.755075] usb 2-6: SerialNumber: 1.0
[ 1104.868018] usb 2-6: reset high-speed USB device number 4 using ehci-pci
[ 1105.002805] mt7601u 2-6:1.0: ASIC revision: 76010001 MAC revision: 76010500
[ 1105.004193] mt7601u 2-6:1.0: firmware: failed to load mt7601u.bin (-2)
[ 1105.004199] mt7601u 2-6:1.0: Direct firmware load for mt7601u.bin failed with error -2
[ 1105.004836] mt7601u: probe of 2-6:1.0 failed with error -2

Awatar użytkownika
dedito
Moderator
Posty: 2911
Rejestracja: 18 listopada 2013, 21:07
Lokalizacja: Gliwice

Re: Jessie problem z WiFi, karta Ralink na USB

Post autor: dedito » 01 sierpnia 2016, 17:52

Problem z firmware:

Kod: Zaznacz cały

[ 1104.612015] usb 2-6: new high-speed USB device number 4 using ehci-pci
[ 1104.755059] usb 2-6: New USB device found, idVendor=148f, idProduct=7601
[ 1104.755065] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1104.755069] usb 2-6: Product: 802.11 n WLAN
[ 1104.755072] usb 2-6: Manufacturer: MediaTek
[ 1104.755075] usb 2-6: SerialNumber: 1.0
[ 1104.868018] usb 2-6: reset high-speed USB device number 4 using ehci-pci
[ 1105.002805] mt7601u 2-6:1.0: ASIC revision: 76010001 MAC revision: 76010500
[ 1105.004193] mt7601u 2-6:1.0: firmware: failed to load mt7601u.bin (-2)
[ 1105.004199] mt7601u 2-6:1.0: Direct firmware load for mt7601u.bin failed with error -2
[ 1105.004836] mt7601u: probe of 2-6:1.0 failed with error -2
Trzeba poszukać rozwiązań u wujka googla.
Jesteś pewien, że karta jest sprawna?

ww71
Beginner
Posty: 390
Rejestracja: 04 grudnia 2008, 11:44
Lokalizacja: lubelskie

Re: Jessie problem z WiFi, karta Ralink na USB

Post autor: ww71 » 01 sierpnia 2016, 17:55

Działa pod win 7.
Dzięki za pomoc.

Awatar użytkownika
dedito
Moderator
Posty: 2911
Rejestracja: 18 listopada 2013, 21:07
Lokalizacja: Gliwice

Re: Jessie problem z WiFi, karta Ralink na USB

Post autor: dedito » 01 sierpnia 2016, 20:04

Wychodzi na to, że chyba lepiej było skompilować ten sterownik producenta na Wheezy.

Zablokowany