[+] Instalacja sterownika do karty przenośnej TL-WN722N

Masz problemy z siecią bądź internetem? Zapytaj tu
kviatek
Beginner
Posty: 175
Rejestracja: 07 lutego 2015, 08:07

Re: Instalacja sterownika do karty przenośnej TL-WN722N

Post autor: kviatek »

Zrobiłem jak radziłeś, ale po tej komendzie Wicd nie widzi sieci bezprzewodowych,
widać, że karta zewnętrzna nie działa
Teraz jak daję "ifconfig wlan0 up" to mam:

Kod: Zaznacz cały

ifconfig wlan0 up
SIOCSIFFLAGS: Operacja niemożliwa ze względu na RF-kill
Jak wrócić do poprzedniego stanu?
Myślę, że masz rację z tą zmianą menedżera, ale to wypróbuję jak wrócę do stanu wyjściowego.


SPOKO, JUŻ DZIAŁA WIFI, DAŁEM RADĘ.

@dedito

Pobawię się jeszcze innym menedżerem, bo jak zasugerowałeś to pewnie w nim leży wina.
Dam znać, jak będą wyniki.
Awatar użytkownika
dedito
Moderator
Posty: 3512
Rejestracja: 18 listopada 2013, 21:07
Lokalizacja: Gliwice

Re: Instalacja sterownika do karty przenośnej TL-WN722N

Post autor: dedito »

Tylko, że jak wyłączyłeś wewnętrzną kartę i włożyłeś kartę usb, to miałeś poleceniem ifconfig sprawdzić czy się pojawiła na liście i wtedy ją załączać.
Niekoniecznie musiała się zgłosić jako wlan0.
W dmesg znajdziesz jeszcze log czy i jak się skonfigurowała karta usb.
No i wynik z

Kod: Zaznacz cały

rfkill list
powiedziałby coś więcej.
kviatek
Beginner
Posty: 175
Rejestracja: 07 lutego 2015, 08:07

Re: Instalacja sterownika do karty przenośnej TL-WN722N

Post autor: kviatek »

Ajjjjjj, no tak :o
Dobra, sprawdzę to jeszcze raz i dam Ci znać, czy zadziałała.
AxPeRsky
Posty: 21
Rejestracja: 12 czerwca 2016, 19:55
Lokalizacja: Augustów <3

Re: Instalacja sterownika do karty przenośnej TL-WN722N

Post autor: AxPeRsky »

Wicd to najgorsze co może być, właśnie szukam alternatywnej apki, z interfejsem podobnym do Mintowego NetworkManagera, mógłbym NM pobrać, ale pliki z głównej strony NM wygasły....
Awatar użytkownika
dedito
Moderator
Posty: 3512
Rejestracja: 18 listopada 2013, 21:07
Lokalizacja: Gliwice

Re: Instalacja sterownika do karty przenośnej TL-WN722N

Post autor: dedito »

To pobierz z repozytoriów.
kviatek
Beginner
Posty: 175
Rejestracja: 07 lutego 2015, 08:07

Re: Instalacja sterownika do karty przenośnej TL-WN722N

Post autor: kviatek »

Hej,

Jest tak: dałem jeszcze raz ifconfig wlan0 down, ale i tak łączył się z netem radiowo, restart kompa i dalej wifi działa, nie wiem, czemu
bo karta zewnętrzna była wyjęta. Wtedy zainstalowałem Network Managera i hura, w przenośnej zaświeciła się dioda i na liście sieci 2 razy jest moja, karta żyje, ale....strony się nie uruchamiają a wymiana danych wg menedżera sieci to cały czas 0 (mam KDE)
Wiecie, o co chodzi, dlaczego strony nie wyświetlają?

Chciałem dodać screena, żebyście widzieli moje menu z menedżera sieci, ale nie wiem jak to wstawić tutaj.
Awatar użytkownika
dedito
Moderator
Posty: 3512
Rejestracja: 18 listopada 2013, 21:07
Lokalizacja: Gliwice

Re: Instalacja sterownika do karty przenośnej TL-WN722N

Post autor: dedito »

Możesz dać wstawkę na zewnętrzny hosting.
A jak strony się nie wczytują, to sprawdź czy przynajmniej ping działa.
No i standardowo pokaż wyniki z ifconfig oraz dmesg.
kviatek
Beginner
Posty: 175
Rejestracja: 07 lutego 2015, 08:07

Re: Instalacja sterownika do karty przenośnej TL-WN722N

Post autor: kviatek »

wyniki:

Kod: Zaznacz cały

ping -c4 212.77.100.101
PING 212.77.100.101 (212.77.100.101) 56(84) bytes of data.

--- 212.77.100.101 ping statistics ---
4 packets transmitted, 0 received, 100% packet loss, time 3022ms

Kod: Zaznacz cały

ping -c4 www.wp.pl
ping: unknown host www.wp.pl

Kod: Zaznacz cały

ifconfig
eth0      Link encap:Ethernet  HWaddr 28:d2:44:f8:aa:c5  
          inet addr:192.168.0.10  Bcast:192.168.0.255  Mask:255.255.255.0
          inet6 addr: fe80::2ad2:44ff:fef8:aac5/64 Scope:Link
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:35182 errors:0 dropped:0 overruns:0 frame:0
          TX packets:17570 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:45737749 (43.6 MiB)  TX bytes:1358446 (1.2 MiB)

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:2153 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2153 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:164087 (160.2 KiB)  TX bytes:164087 (160.2 KiB)

Kod: Zaznacz cały

[    0.000000] efi: mem16: type=7, attr=0xf, range=[0x00000000a2ee0000-0x00000000a4833000) (25MB)
[    0.000000] efi: mem17: type=4, attr=0xf, range=[0x00000000a4833000-0x00000000a56b0000) (14MB)
[    0.000000] efi: mem18: type=0, attr=0xf, range=[0x00000000a56b0000-0x00000000a5eb0000) (8MB)
[    0.000000] efi: mem19: type=7, attr=0xf, range=[0x00000000a5eb0000-0x00000000a60a1000) (1MB)
[    0.000000] efi: mem20: type=1, attr=0xf, range=[0x00000000a60a1000-0x00000000a60bf000) (0MB)
[    0.000000] efi: mem21: type=7, attr=0xf, range=[0x00000000a60bf000-0x00000000a7130000) (16MB)
[    0.000000] efi: mem22: type=4, attr=0xf, range=[0x00000000a7130000-0x00000000a717b000) (0MB)
[    0.000000] efi: mem23: type=7, attr=0xf, range=[0x00000000a717b000-0x00000000a717c000) (0MB)
[    0.000000] efi: mem24: type=4, attr=0xf, range=[0x00000000a717c000-0x00000000a7346000) (1MB)
[    0.000000] efi: mem25: type=7, attr=0xf, range=[0x00000000a7346000-0x00000000a7347000) (0MB)
[    0.000000] efi: mem26: type=4, attr=0xf, range=[0x00000000a7347000-0x00000000a7348000) (0MB)
[    0.000000] efi: mem27: type=7, attr=0xf, range=[0x00000000a7348000-0x00000000a7349000) (0MB)
[    0.000000] efi: mem28: type=4, attr=0xf, range=[0x00000000a7349000-0x00000000a7fd8000) (12MB)
[    0.000000] efi: mem29: type=7, attr=0xf, range=[0x00000000a7fd8000-0x00000000a7fda000) (0MB)
[    0.000000] efi: mem30: type=4, attr=0xf, range=[0x00000000a7fda000-0x00000000a7fe6000) (0MB)
[    0.000000] efi: mem31: type=7, attr=0xf, range=[0x00000000a7fe6000-0x00000000a7fe7000) (0MB)
[    0.000000] efi: mem32: type=4, attr=0xf, range=[0x00000000a7fe7000-0x00000000a800e000) (0MB)
[    0.000000] efi: mem33: type=7, attr=0xf, range=[0x00000000a800e000-0x00000000a800f000) (0MB)
[    0.000000] efi: mem34: type=4, attr=0xf, range=[0x00000000a800f000-0x00000000a815b000) (1MB)
[    0.000000] efi: mem35: type=7, attr=0xf, range=[0x00000000a815b000-0x00000000a815d000) (0MB)
[    0.000000] efi: mem36: type=4, attr=0xf, range=[0x00000000a815d000-0x00000000a8171000) (0MB)
[    0.000000] efi: mem37: type=7, attr=0xf, range=[0x00000000a8171000-0x00000000a8173000) (0MB)
[    0.000000] efi: mem38: type=4, attr=0xf, range=[0x00000000a8173000-0x00000000a8178000) (0MB)
[    0.000000] efi: mem39: type=7, attr=0xf, range=[0x00000000a8178000-0x00000000a8179000) (0MB)
[    0.000000] efi: mem40: type=4, attr=0xf, range=[0x00000000a8179000-0x00000000a81ab000) (0MB)
[    0.000000] efi: mem41: type=7, attr=0xf, range=[0x00000000a81ab000-0x00000000a81ac000) (0MB)
[    0.000000] efi: mem42: type=4, attr=0xf, range=[0x00000000a81ac000-0x00000000a81bc000) (0MB)
[    0.000000] efi: mem43: type=7, attr=0xf, range=[0x00000000a81bc000-0x00000000a81bf000) (0MB)
[    0.000000] efi: mem44: type=4, attr=0xf, range=[0x00000000a81bf000-0x00000000a81c1000) (0MB)
[    0.000000] efi: mem45: type=7, attr=0xf, range=[0x00000000a81c1000-0x00000000a81c4000) (0MB)
[    0.000000] efi: mem46: type=4, attr=0xf, range=[0x00000000a81c4000-0x00000000aa0bf000) (30MB)
[    0.000000] efi: mem47: type=7, attr=0xf, range=[0x00000000aa0bf000-0x00000000aa2ea000) (2MB)
[    0.000000] efi: mem48: type=2, attr=0xf, range=[0x00000000aa2ea000-0x00000000aa2f4000) (0MB)
[    0.000000] efi: mem49: type=3, attr=0xf, range=[0x00000000aa2f4000-0x00000000aa6bf000) (3MB)
[    0.000000] efi: mem50: type=5, attr=0x800000000000000f, range=[0x00000000aa6bf000-0x00000000aa8bf000) (2MB)
[    0.000000] efi: mem51: type=6, attr=0x800000000000000f, range=[0x00000000aa8bf000-0x00000000aaabf000) (2MB)
[    0.000000] efi: mem52: type=0, attr=0xf, range=[0x00000000aaabf000-0x00000000aaebf000) (4MB)
[    0.000000] efi: mem53: type=10, attr=0xf, range=[0x00000000aaebf000-0x00000000aafbf000) (1MB)
[    0.000000] efi: mem54: type=9, attr=0xf, range=[0x00000000aafbf000-0x00000000aafff000) (0MB)
[    0.000000] efi: mem55: type=4, attr=0xf, range=[0x00000000aafff000-0x00000000ab000000) (0MB)
[    0.000000] efi: mem56: type=7, attr=0xf, range=[0x0000000100000000-0x000000024f600000) (5366MB)
[    0.000000] efi: mem57: type=0, attr=0x0, range=[0x00000000000a0000-0x00000000000c0000) (0MB)
[    0.000000] efi: mem58: type=0, attr=0x0, range=[0x00000000ab000000-0x00000000afa00000) (74MB)
[    0.000000] efi: mem59: type=11, attr=0x8000000000000001, range=[0x00000000e0000000-0x00000000f0000000) (256MB)
[    0.000000] efi: mem60: type=0, attr=0x0, range=[0x00000000fe101000-0x00000000fe113000) (0MB)
[    0.000000] efi: mem61: type=11, attr=0x8000000000000001, range=[0x00000000feb00000-0x00000000feb10000) (0MB)
[    0.000000] efi: mem62: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[    0.000000] efi: mem63: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed1c000) (0MB)
[    0.000000] efi: mem64: type=11, attr=0x8000000000000000, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[    0.000000] efi: mem65: type=11, attr=0x8000000000000001, range=[0x00000000fed20000-0x00000000fee01000) (0MB)
[    0.000000] efi: mem66: type=11, attr=0x8000000000000001, range=[0x00000000ffc00000-0x0000000100000000) (4MB)
[    0.000000] SMBIOS 0.7 present.
[    0.000000] DMI: LENOVO 80HW/Lenovo G70-70, BIOS B6CN13WW 11/12/2014
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x24f600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-E7FFF write-protect
[    0.000000]   E8000-EFFFF write-combining
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 7C00000000 write-back
[    0.000000]   1 base 00AB000000 mask 7FFF000000 uncachable
[    0.000000]   2 base 00AC000000 mask 7FFC000000 uncachable
[    0.000000]   3 base 00B0000000 mask 7FF0000000 uncachable
[    0.000000]   4 base 00C0000000 mask 7FC0000000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: update [mem 0xab000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xab000 max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffff880000082000] 82000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01cf4000, 0x01cf4fff] PGTABLE
[    0.000000] BRK [0x01cf5000, 0x01cf5fff] PGTABLE
[    0.000000] BRK [0x01cf6000, 0x01cf6fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x24f400000-0x24f5fffff]
[    0.000000]  [mem 0x24f400000-0x24f5fffff] page 2M
[    0.000000] BRK [0x01cf7000, 0x01cf7fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x24c000000-0x24f3fffff]
[    0.000000]  [mem 0x24c000000-0x24f3fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x200000000-0x24bffffff]
[    0.000000]  [mem 0x200000000-0x23fffffff] page 1G
[    0.000000]  [mem 0x240000000-0x24bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xa56affff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0x7fffffff] page 1G
[    0.000000]  [mem 0x80000000-0xa55fffff] page 2M
[    0.000000]  [mem 0xa5600000-0xa56affff] page 4k
[    0.000000] init_memory_mapping: [mem 0xa5eb0000-0xaa6befff]
[    0.000000]  [mem 0xa5eb0000-0xa5ffffff] page 4k
[    0.000000]  [mem 0xa6000000-0xaa5fffff] page 2M
[    0.000000]  [mem 0xaa600000-0xaa6befff] page 4k
[    0.000000] BRK [0x01cf8000, 0x01cf8fff] PGTABLE
[    0.000000] BRK [0x01cf9000, 0x01cf9fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xaafff000-0xaaffffff]
[    0.000000]  [mem 0xaafff000-0xaaffffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[    0.000000]  [mem 0x100000000-0x1ffffffff] page 1G
[    0.000000] RAMDISK: [mem 0x361e2000-0x370e8fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000AAFFE014 000024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 0x00000000AAFFE210 0000C4 (v01 LENOVO CB-01    00000001      01000013)
[    0.000000] ACPI: FACP 0x00000000AAFF7000 00010C (v05 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DSDT 0x00000000AAFE4000 00F48A (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: FACS 0x00000000AAFBB000 000040
[    0.000000] ACPI: SLIC 0x00000000AAFFD000 000176 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: UEFI 0x00000000AAFFC000 000236 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: FPDT 0x00000000AAFFA000 000044 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: MSDM 0x00000000AAFF9000 000055 (v03 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: ASF! 0x00000000AAFF8000 0000A5 (v32 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: HPET 0x00000000AAFF6000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: APIC 0x00000000AAFF5000 00008C (v03 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: MCFG 0x00000000AAFF4000 00003C (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: WDAT 0x00000000AAFE3000 000224 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x00000000AAFE0000 002028 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: BOOT 0x00000000AAFDE000 000028 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: LPIT 0x00000000AAFDD000 000094 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: ASPT 0x00000000AAFDB000 000034 (v07 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DBGP 0x00000000AAFDA000 000034 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x00000000AAFD2000 000539 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x00000000AAFD1000 000AD8 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x00000000AAFCD000 0034F8 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x00000000AAFC8000 0034B3 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: BGRT 0x00000000AAFCC000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000024f5fffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x24f5fffff]
[    0.000000]   NODE_DATA [mem 0x24f5f8000-0x24f5fcfff]
[    0.000000]  [ffffea0000000000-ffffea00081fffff] PMD -> [ffff880246c00000-ffff88024ddfffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x24f5fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0006efff]
[    0.000000]   node   0: [mem 0x00070000-0x00087fff]
[    0.000000]   node   0: [mem 0x00100000-0xa56affff]
[    0.000000]   node   0: [mem 0xa5eb0000-0xaa6befff]
[    0.000000]   node   0: [mem 0xaafff000-0xaaffffff]
[    0.000000]   node   0: [mem 0x100000000-0x24f5fffff]
[    0.000000] On node 0 totalpages: 2069574
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 24 pages reserved
[    0.000000]   DMA zone: 3974 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 9460 pages used for memmap
[    0.000000]   DMA32 zone: 691904 pages, LIFO batch:31
[    0.000000]   Normal zone: 18781 pages used for memmap
[    0.000000]   Normal zone: 1373696 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics stolen memory at 0xaba00000-0xaf9fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 56
[    0.000000] PM: Registered nosave memory: [mem 0x0006f000-0x0006ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xa56b0000-0xa5eaffff]
[    0.000000] PM: Registered nosave memory: [mem 0xaa6bf000-0xaa8befff]
[    0.000000] PM: Registered nosave memory: [mem 0xaa8bf000-0xaaebefff]
[    0.000000] PM: Registered nosave memory: [mem 0xaaebf000-0xaafbefff]
[    0.000000] PM: Registered nosave memory: [mem 0xaafbf000-0xaaffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xab000000-0xaf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xafa00000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfe100fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe113000-0xfeafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[    0.000000] e820: [mem 0xafa00000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88024f200000 s80896 r8192 d21504 u262144
[    0.000000] pcpu-alloc: s80896 r8192 d21504 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2041253
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.16.0-4-amd64 root=UUID=2d24f2a8-0eae-4b44-a61d-c7c63e1b254c ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 8000160K/8278296K available (5222K kernel code, 947K rwdata, 1836K rodata, 1204K init, 840K bss, 278136K reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]  RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:1016 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2394.450 MHz processor
[    0.000039] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.90 BogoMIPS (lpj=9577800)
[    0.000043] pid_max: default: 32768 minimum: 301
[    0.000053] ACPI: Core revision 20140424
[    0.021515] ACPI: All ACPI Tables successfully acquired
[    0.038967] Security Framework initialized
[    0.038978] AppArmor: AppArmor disabled by boot time parameter
[    0.038980] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.039639] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.041791] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.042722] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.042735] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
...
[    0.285277] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[    0.285492] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
[    0.285508] pci 0000:00:02.0: reg 0x10: [mem 0xc3000000-0xc33fffff 64bit]
[    0.285516] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.285522] pci 0000:00:02.0: reg 0x20: [io  0x5000-0x503f]
[    0.285728] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[    0.285739] pci 0000:00:03.0: reg 0x10: [mem 0xc3610000-0xc3613fff 64bit]
[    0.285970] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[    0.285990] pci 0000:00:14.0: reg 0x10: [mem 0xc3600000-0xc360ffff 64bit]
[    0.286054] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.286198] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.286251] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
[    0.286274] pci 0000:00:16.0: reg 0x10: [mem 0xc3618000-0xc361801f 64bit]
[    0.286349] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.286548] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[    0.286565] pci 0000:00:1b.0: reg 0x10: [mem 0xc3614000-0xc3617fff 64bit]
[    0.286638] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.286783] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.286831] pci 0000:00:1c.0: [8086:9c14] type 01 class 0x060400
[    0.286905] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.287051] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.287101] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
[    0.287174] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.287322] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.287368] pci 0000:00:1c.4: [8086:9c18] type 01 class 0x060400
[    0.287442] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.287602] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    0.287657] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
[    0.287680] pci 0000:00:1d.0: reg 0x10: [mem 0xc361c000-0xc361c3ff]
[    0.287776] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.287935] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.287987] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
[    0.288292] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
[    0.288309] pci 0000:00:1f.2: reg 0x10: [io  0x5088-0x508f]
[    0.288317] pci 0000:00:1f.2: reg 0x14: [io  0x5094-0x5097]
[    0.288324] pci 0000:00:1f.2: reg 0x18: [io  0x5080-0x5087]
[    0.288332] pci 0000:00:1f.2: reg 0x1c: [io  0x5090-0x5093]
[    0.288340] pci 0000:00:1f.2: reg 0x20: [io  0x5060-0x507f]
[    0.288348] pci 0000:00:1f.2: reg 0x24: [mem 0xc361b000-0xc361b7ff]
[    0.288388] pci 0000:00:1f.2: PME# supported from D3hot
[    0.288571] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[    0.288586] pci 0000:00:1f.3: reg 0x10: [mem 0xc3619000-0xc36190ff 64bit]
[    0.288608] pci 0000:00:1f.3: reg 0x20: [io  0x5040-0x505f]
[    0.288879] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[    0.288900] pci 0000:01:00.0: reg 0x10: [io  0x4000-0x40ff]
[    0.288930] pci 0000:01:00.0: reg 0x18: [mem 0xc3504000-0xc3504fff 64bit]
[    0.288949] pci 0000:01:00.0: reg 0x20: [mem 0xc3500000-0xc3503fff 64bit]
[    0.289048] pci 0000:01:00.0: supports D1 D2
[    0.289050] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.289089] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.300254] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.300258] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.300262] pci 0000:00:1c.0:   bridge window [mem 0xc3500000-0xc35fffff]
[    0.300383] pci 0000:02:00.0: [14e4:4365] type 00 class 0x028000
[    0.300418] pci 0000:02:00.0: reg 0x10: [mem 0xc3400000-0xc3407fff 64bit]
[    0.300613] pci 0000:02:00.0: supports D1 D2
[    0.300615] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.300661] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.312289] pci 0000:00:1c.3: PCI bridge to [bus 02]
[    0.312294] pci 0000:00:1c.3:   bridge window [mem 0xc3400000-0xc34fffff]
[    0.312382] pci 0000:03:00.0: [10de:1140] type 00 class 0x030200
[    0.312401] pci 0000:03:00.0: reg 0x10: [mem 0xc2000000-0xc2ffffff]
[    0.312418] pci 0000:03:00.0: reg 0x14: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.312437] pci 0000:03:00.0: reg 0x1c: [mem 0xc0000000-0xc1ffffff 64bit pref]
[    0.312449] pci 0000:03:00.0: reg 0x24: [io  0x3000-0x307f]
[    0.312461] pci 0000:03:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[    0.312556] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.324285] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.324289] pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
[    0.324293] pci 0000:00:1c.4:   bridge window [mem 0xc2000000-0xc2ffffff]
[    0.324298] pci 0000:00:1c.4:   bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
[    0.324338] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[    0.325853] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.325914] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.325972] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.326029] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.326086] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.326142] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.326197] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.326254] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.326624] ACPI: Enabled 4 GPEs in block 00 to 7F
[    0.326674] ACPI : EC: GPE = 0x7, I/O: command/status = 0x66, data = 0x62
[    0.326804] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.326806] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.326810] vgaarb: loaded
[    0.326811] vgaarb: bridge control possible 0000:00:02.0
[    0.326945] PCI: Using ACPI for IRQ routing
....
[    0.350553] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
[    0.350555] pci_bus 0000:01: resource 1 [mem 0xc3500000-0xc35fffff]
[    0.350557] pci_bus 0000:02: resource 1 [mem 0xc3400000-0xc34fffff]
[    0.350559] pci_bus 0000:03: resource 0 [io  0x3000-0x3fff]
[    0.350560] pci_bus 0000:03: resource 1 [mem 0xc2000000-0xc2ffffff]
[    0.350562] pci_bus 0000:03: resource 2 [mem 0xb0000000-0xc1ffffff 64bit pref]
[    0.350626] NET: Registered protocol family 2
[    0.350932] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.351111] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.351253] TCP: Hash tables configured (established 65536 bind 65536)
[    0.351273] TCP: reno registered
[    0.351287] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.351320] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.351428] NET: Registered protocol family 1
[    0.351448] pci 0000:00:02.0: Video device with shadowed ROM
[    0.367486] PCI: CLS 64 bytes, default 64
[    0.367544] Unpacking initramfs...
[    0.742181] Freeing initrd memory: 15388K (ffff8800361e2000 - ffff8800370e9000)
[    0.742191] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.742194] software IO TLB [mem 0x9eec0000-0xa2ec0000] (64MB) mapped at [ffff88009eec0000-ffff8800a2ebffff]
[    0.742231] Simple Boot Flag at 0x44 set to 0x1
[    0.742441] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[    0.742502] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x1d
[    0.742509] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x1d
[    0.742517] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x1d
[    0.742526] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x1d
[    0.742589] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.742683] simple-framebuffer simple-framebuffer.0: framebuffer at 0xd0000000, 0x57f000 bytes, mapped to 0xffffc90010e80000
[    0.742685] simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=1600x900x32, linelength=6400
[    0.746819] Console: switching to colour frame buffer device 200x56
[    0.750845] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
[    0.751214] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.751262] audit: initializing netlink subsys (disabled)
[    0.751282] audit: type=2000 audit(1467061915.732:1): initialized
[    0.751742] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.751769] zbud: loaded
[    0.752005] VFS: Disk quotas dquot_6.5.2
[    0.752025] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.752093] msgmni has been set to 15787
[    0.752432] alg: No test for stdrng (krng)
[    0.752461] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.752514] io scheduler noop registered
[    0.752517] io scheduler deadline registered
[    0.752563] io scheduler cfq registered (default)
[    0.752638] pcieport 0000:00:1c.0: device [8086:9c14] has invalid IRQ; check vendor BIOS
[    0.752794] pcieport 0000:00:1c.0: irq 56 for MSI/MSI-X
[    0.752863] pcieport 0000:00:1c.3: device [8086:9c16] has invalid IRQ; check vendor BIOS
[    0.752984] pcieport 0000:00:1c.3: irq 57 for MSI/MSI-X
[    0.753044] pcieport 0000:00:1c.4: device [8086:9c18] has invalid IRQ; check vendor BIOS
[    0.753155] pcieport 0000:00:1c.4: irq 58 for MSI/MSI-X
[    0.753257] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.753259] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    0.753263] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    0.753281] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[    0.753283] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    0.753287] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[    0.753306] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[    0.753308] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    0.753312] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[    0.753333] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.753354] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.753382] intel_idle: MWAIT substates: 0x11142120
[    0.753383] intel_idle: v0.4 model 0x45
[    0.753384] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.753718] GHES: HEST is not enabled!
[    0.753806] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.754321] Linux agpgart interface v0.103
[    0.754466] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.768304] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.768310] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.768476] mousedev: PS/2 mouse device common for all mice
[    0.768514] rtc_cmos 00:01: RTC can wake from S4
[    0.768689] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    0.768721] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.768741] Intel P-state driver initializing.
[    0.768754] Intel pstate controlling: cpu 0
[    0.768781] Intel pstate controlling: cpu 1
[    0.768895] Intel pstate controlling: cpu 2
[    0.768918] Intel pstate controlling: cpu 3
[    0.769009] ledtrig-cpu: registered to indicate activity on CPUs
.........
[    2.294926] usb 2-7: New USB device found, idVendor=105b, idProduct=e065
[    2.294931] usb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.294933] usb 2-7: Product: BCM43142A0
[    2.294935] usb 2-7: Manufacturer: Broadcom Corp
[    2.294936] usb 2-7: SerialNumber: 38B1DBD469EE
[    2.405054] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.537522] usb 1-1: New USB device found, idVendor=8087, idProduct=8000
[    2.537526] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.537900] hub 1-1:1.0: USB hub found
[    2.537971] hub 1-1:1.0: 8 ports detected
[    2.741519] Switched to clocksource tsc
[    3.588979] random: nonblocking pool is initialized
[    3.823393] PM: Starting manual resume from disk
[    3.823397] PM: Hibernation image partition 8:6 present
[    3.823398] PM: Looking for hibernation image.
[    3.830333] PM: Image not found (code -22)
[    3.830336] PM: Hibernation image not present or could not be loaded.
[    4.182003] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[    4.933435] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
[    6.697307] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    6.919426] fuse init (API version 7.23)
[    7.557283] systemd-udevd[193]: starting version 215
[    9.038775] ACPI: AC Adapter [ADP0] (on-line)
[    9.155251] wmi: Mapper loaded
[    9.292101] mei_me 0000:00:16.0: irq 62 for MSI/MSI-X
[    9.305959] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
[    9.306012] ACPI: Lid Switch [LID0]
[    9.306090] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
[    9.306095] ACPI: Power Button [PWRB]
[    9.306165] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[    9.306168] ACPI: Power Button [PWRF]
[    9.470080] ACPI Warning: SystemIO range 0x0000000000005040-0x000000000000505F conflicts with OpRegion 0x0000000000005040-0x000000000000504F (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-254)
[    9.470088] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.536172] ACPI: Battery Slot [BAT0] (battery absent)
[    9.546390] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    9.633862] EFI Variables Facility v0.08 2004-May-17
[    9.685923] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input8
[    9.736555] input: PC Speaker as /devices/platform/pcspkr/input/input9
[    9.906587] [drm] Initialized drm 1.1.0 20060810
[    9.954964] pstore: Registered efi as persistent store backend
[   10.342132] cfg80211: Calling CRDA to update world regulatory domain
[   10.347780] snd_hda_intel 0000:00:1b.0: irq 63 for MSI/MSI-X
[   10.694200] sound hdaudioC1D0: CX20751/2: BIOS auto-probing.
[   10.694419] sound hdaudioC1D0: autoconfig: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[   10.694421] sound hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   10.694423] sound hdaudioC1D0:    hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[   10.694425] sound hdaudioC1D0:    mono: mono_out=0x0
[   10.694426] sound hdaudioC1D0:    inputs:
[   10.694428] sound hdaudioC1D0:      Internal Mic=0x1a
[   10.694430] sound hdaudioC1D0:      Mic=0x19
[   10.695125] sound hdaudioC1D0: Enable sync_write for stable communication
[   10.697598] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/hdaudioC1D0/input10
[   10.697786] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[   10.697860] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[   10.739847] [drm] Memory usable by graphics device = 2048M
[   10.739851] checking generic (d0000000 57f000) vs hw (d0000000 10000000)
[   10.739852] fb: switching to inteldrmfb from simple
[   10.739880] Console: switching to colour dummy device 80x25
[   10.739930] [drm] Replacing VGA console driver
[   10.763843] i915 0000:00:02.0: irq 64 for MSI/MSI-X
[   10.763855] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   10.763856] [drm] Driver supports precise vblank timestamp query.
[   10.763911] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   10.795924] [drm] VBT doesn't support DRRS
[   10.830010] fbcon: inteldrmfb (fb0) is primary device
[   11.130728] ppdev: user-space parallel port driver
[   11.180834] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
[   11.221219] AVX2 version of gcm_enc/dec engaged.
[   11.222985] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[   11.451635] iTCO_vendor_support: vendor-support=0
[   11.464625] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   11.464684] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
[   11.464898] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   11.653027] alg: No test for crc32 (crc32-pclmul)
[   11.774099] media: Linux media interface: v0.10
[   11.790263] Linux video capture interface: v2.00
[   11.900756] wl: module license 'MIXED/Proprietary' taints kernel.
[   11.900757] Disabling lock debugging due to kernel taint
[   11.932248] wl0: online cpus 1
[   11.932654] wlan0: Broadcom BCM4365 802.11 Hybrid Wireless Controller 6.30.223.248 (r487574)
[   11.975555] kvm: disabled by bios
[   11.985517] kvm: disabled by bios
[   12.021631] kvm: disabled by bios
[   12.053574] kvm: disabled by bios
[   12.180993] Console: switching to colour frame buffer device 200x56
[   12.185768] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   12.185770] i915 0000:00:02.0: registered panic notifier
[   12.213460] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[   12.213877] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
[   12.213882] ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NOT_FOUND (20140424/psargs-359)
[   12.213888] ACPI Error: Method parse/execution failed [\_SB_.PCI0.RP05.PEGP.DD02._BCL] (Node ffff88024e888b08), AE_NOT_FOUND (20140424/psparse-536)
[   12.213962] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:31/LNXVIDEO:00/input/input13
[   12.226832] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   12.226962] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input14
[   12.227065] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   12.232991] snd_hda_intel 0000:00:03.0: irq 65 for MSI/MSI-X
[   12.434515] intel_rapl: Found RAPL domain package
[   12.434518] intel_rapl: Found RAPL domain core
[   12.434520] intel_rapl: Found RAPL domain uncore
[   12.434521] intel_rapl: Found RAPL domain dram
[   12.434526] intel_rapl: RAPL package 0 domain package locked by BIOS
[   12.467375] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (0c45:6513)
[   12.499886] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.0/input/input15
[   12.499978] usbcore: registered new interface driver uvcvideo
[   12.499981] USB Video Class driver (1.1.1)
[   12.805600] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[   12.813862] Adding 1952764k swap on /dev/sda6.  Priority:-1 extents:1 across:1952764k FS
[   12.814975] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
[   12.815064] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
[   12.815147] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
[   13.479065] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[   13.676229] cfg80211: World regulatory domain updated:
[   13.676234] cfg80211:  DFS Master region: unset
[   13.676235] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   13.676238] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   13.676240] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   13.676242] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   13.676244] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   13.676246] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   13.676248] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   13.676249] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   13.676251] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   14.183260] FAT-fs (sda2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[   14.280893] systemd-journald[185]: Received request to flush runtime journal from PID 1
[   15.055142] r8169 0000:01:00.0: firmware: direct-loading firmware rtl_nic/rtl8168g-3.fw
[   15.069372] r8169 0000:01:00.0 eth0: link down
[   15.069410] r8169 0000:01:00.0 eth0: link down
[   15.069424] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   16.133766] RPC: Registered named UNIX socket transport module.
[   16.133770] RPC: Registered udp transport module.
[   16.133771] RPC: Registered tcp transport module.
[   16.133773] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   16.160723] FS-Cache: Loaded
[   16.198719] FS-Cache: Netfs 'nfs' registered for caching
[   16.259739] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   18.220328] r8169 0000:01:00.0 eth0: link up
[   18.220338] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   23.241516] bbswitch: version 0.8
[   23.241522] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[   23.241527] bbswitch: Found discrete VGA device 0000:03:00.0: \_SB_.PCI0.RP05.PEGP
[   23.241538] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[   23.241615] bbswitch: detected an Optimus _DSM function
[   23.241627] pci 0000:03:00.0: enabling device (0006 -> 0007)
[   23.241676] bbswitch: Succesfully loaded. Discrete card 0000:03:00.0 is on
[   23.243246] bbswitch: disabling discrete graphics
[   23.243254] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[   48.513313] Bluetooth: Core ver 2.19
[   48.513326] NET: Registered protocol family 31
[   48.513327] Bluetooth: HCI device and connection manager initialized
[   48.513333] Bluetooth: HCI socket layer initialized
[   48.513335] Bluetooth: L2CAP socket layer initialized
[   48.513344] Bluetooth: SCO socket layer initialized
[   48.563917] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   48.563921] Bluetooth: BNEP filters: protocol multicast
[   48.563928] Bluetooth: BNEP socket layer initialized
[   60.135623] wl0: link up (wlan0)
[   60.135699] cfg80211: Calling CRDA for country: EU
[   92.469488] r8169 0000:01:00.0 eth0: link down
[  128.304051] r8169 0000:01:00.0 eth0: link up
[  781.837235] r8169 0000:01:00.0 eth0: link down
[  786.133922] usb 2-2: new high-speed USB device number 6 using xhci_hcd
[  786.334719] usb 2-2: New USB device found, idVendor=0cf3, idProduct=9271
[  786.334723] usb 2-2: New USB device strings: Mfr=16, Product=32, SerialNumber=48
[  786.334725] usb 2-2: Product: USB2.0 WLAN
[  786.334727] usb 2-2: Manufacturer: ATHEROS
[  786.334729] usb 2-2: SerialNumber: 12345
[  787.503001] usb 2-2: ath9k_htc: Firmware htc_9271.fw requested
[  787.503152] usbcore: registered new interface driver ath9k_htc
[  787.516850] usb 2-2: firmware: direct-loading firmware htc_9271.fw
[  787.798895] usb 2-2: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272
[  788.036651] ath9k_htc 2-2:1.0: ath9k_htc: HTC initialized with 33 credits
[  788.302361] ath9k_htc 2-2:1.0: ath9k_htc: FW Version: 1.3
[  788.302369] ath: EEPROM regdomain: 0x809c
[  788.302372] ath: EEPROM indicates we should expect a country code
[  788.302375] ath: doing EEPROM country->regdmn map search
[  788.302377] ath: country maps to regdmn code: 0x52
[  788.302380] ath: Country alpha2 being used: CN
[  788.302383] ath: Regpair used: 0x52
[  788.362818] ieee80211 phy1: Atheros AR9271 Rev:1
[  788.363113] cfg80211: Calling CRDA for country: EU
[  788.681501] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  799.557353] wlan1: authenticate with 28:be:9b:05:fc:77
[  799.983173] wlan1: send auth to 28:be:9b:05:fc:77 (try 1/3)
[  799.985809] wlan1: authenticated
[  799.989105] wlan1: associate with 28:be:9b:05:fc:77 (try 1/3)
[  799.992629] wlan1: RX AssocResp from 28:be:9b:05:fc:77 (capab=0x411 status=0 aid=2)
[  800.002335] wlan1: associated
[  800.002359] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[  800.079875] wlan1: Limiting TX power to 20 (20 - 0) dBm as advertised by 28:be:9b:05:fc:77
[  885.296981] r8169 0000:01:00.0 eth0: link up
[  889.733471] usb 2-2: USB disconnect, device number 6
[  889.753668] wlan1: deauthenticating from 28:be:9b:05:fc:77 by local choice (Reason: 3=DEAUTH_LEAVING)
[  889.855598] ath: phy1: RX failed to go idle in 10 ms RXSM=0x48a1ce10
[  889.865636] ath: phy1: Failed to wakeup in 500us
[  889.965645] ath: phy1: RX failed to go idle in 10 ms RXSM=0x40b3ed0f
[  889.975704] ath: phy1: Failed to wakeup in 500us
[  890.075806] ath: phy1: RX failed to go idle in 10 ms RXSM=0xc892ce10
[  890.085829] ath: phy1: Failed to wakeup in 500us
[  890.187042] ath: phy1: RX failed to go idle in 10 ms RXSM=0xc892ce10
[  890.265065] usb 2-2: ath9k_htc: USB layer deinitialized
[  926.603475] usb 2-2: new high-speed USB device number 7 using xhci_hcd
[  926.804053] usb 2-2: New USB device found, idVendor=0cf3, idProduct=9271
[  926.804062] usb 2-2: New USB device strings: Mfr=16, Product=32, SerialNumber=48
[  926.804067] usb 2-2: Product: USB2.0 WLAN
[  926.804070] usb 2-2: Manufacturer: ATHEROS
[  926.804074] usb 2-2: SerialNumber: 12345
[  926.804801] usb 2-2: ath9k_htc: Firmware htc_9271.fw requested
[  926.805186] usb 2-2: firmware: direct-loading firmware htc_9271.fw
[  927.087350] usb 2-2: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272
[  927.325048] ath9k_htc 2-2:1.0: ath9k_htc: HTC initialized with 33 credits
[  927.593610] ath9k_htc 2-2:1.0: ath9k_htc: FW Version: 1.3
[  927.593618] ath: EEPROM regdomain: 0x809c
[  927.593621] ath: EEPROM indicates we should expect a country code
[  927.593624] ath: doing EEPROM country->regdmn map search
[  927.593626] ath: country maps to regdmn code: 0x52
[  927.593629] ath: Country alpha2 being used: CN
[  927.593632] ath: Regpair used: 0x52
[  927.598657] ieee80211 phy2: Atheros AR9271 Rev:1
[  927.598685] cfg80211: Calling CRDA for country: EU
[  928.131604] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  929.577904] r8169 0000:01:00.0 eth0: link down
[  937.676639] wlan1: authenticate with 28:be:9b:05:fc:77
[  938.104165] wlan1: send auth to 28:be:9b:05:fc:77 (try 1/3)
[  938.105921] wlan1: authenticated
[  938.108654] wlan1: associate with 28:be:9b:05:fc:77 (try 1/3)
[  938.112140] wlan1: RX AssocResp from 28:be:9b:05:fc:77 (capab=0x411 status=0 aid=2)
[  938.121857] wlan1: associated
[  938.121890] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[  938.185044] wlan1: Limiting TX power to 20 (20 - 0) dBm as advertised by 28:be:9b:05:fc:77
[  978.869579] usb 2-2: USB disconnect, device number 7
[  978.889053] wlan1: deauthenticating from 28:be:9b:05:fc:77 by local choice (Reason: 3=DEAUTH_LEAVING)
[  978.990969] ath: phy2: RX failed to go idle in 10 ms RXSM=0x4861819a
[  979.001010] ath: phy2: Failed to wakeup in 500us
[  979.100951] ath: phy2: RX failed to go idle in 10 ms RXSM=0x4053582e
[  979.111014] ath: phy2: Failed to wakeup in 500us
[  979.210968] ath: phy2: RX failed to go idle in 10 ms RXSM=0xc852819a
[  979.220979] ath: phy2: Failed to wakeup in 500us
[  979.322312] ath: phy2: RX failed to go idle in 10 ms RXSM=0xc852819a
[  979.385058] usb 2-2: ath9k_htc: USB layer deinitialized
[  982.659755] r8169 0000:01:00.0 eth0: link up
[ 1019.858760] usb 2-2: new high-speed USB device number 8 using xhci_hcd
[ 1020.059485] usb 2-2: New USB device found, idVendor=0cf3, idProduct=9271
[ 1020.059490] usb 2-2: New USB device strings: Mfr=16, Product=32, SerialNumber=48
[ 1020.059493] usb 2-2: Product: USB2.0 WLAN
[ 1020.059495] usb 2-2: Manufacturer: ATHEROS
[ 1020.059497] usb 2-2: SerialNumber: 12345
[ 1020.060000] usb 2-2: ath9k_htc: Firmware htc_9271.fw requested
[ 1020.060240] usb 2-2: firmware: direct-loading firmware htc_9271.fw
[ 1020.342171] usb 2-2: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272
[ 1020.580198] ath9k_htc 2-2:1.0: ath9k_htc: HTC initialized with 33 credits
[ 1020.910134] ath9k_htc 2-2:1.0: ath9k_htc: FW Version: 1.3
[ 1020.910141] ath: EEPROM regdomain: 0x809c
[ 1020.910143] ath: EEPROM indicates we should expect a country code
[ 1020.910146] ath: doing EEPROM country->regdmn map search
[ 1020.910148] ath: country maps to regdmn code: 0x52
[ 1020.910150] ath: Country alpha2 being used: CN
[ 1020.910152] ath: Regpair used: 0x52
[ 1020.915094] ieee80211 phy3: Atheros AR9271 Rev:1
[ 1020.915255] cfg80211: Calling CRDA for country: EU
[ 1020.916612] r8169 0000:01:00.0 eth0: link down
[ 1021.378541] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 1021.535185] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1021.536021] wl0: link down (wlan0)
[ 1125.690104] usb 2-2: USB disconnect, device number 8
[ 1125.778555] usb 2-2: ath9k_htc: USB layer deinitialized
[ 1131.760089] r8169 0000:01:00.0 eth0: link up
[ 1175.988604] wl0: link up (wlan0)
Awatar użytkownika
dedito
Moderator
Posty: 3512
Rejestracja: 18 listopada 2013, 21:07
Lokalizacja: Gliwice

Re: Instalacja sterownika do karty przenośnej TL-WN722N

Post autor: dedito »

W ogóle karty nie widać.
Pokaż jeszcze:

Kod: Zaznacz cały

rfkill list all

Kod: Zaznacz cały

ifconfig -a
kviatek
Beginner
Posty: 175
Rejestracja: 07 lutego 2015, 08:07

Re: Instalacja sterownika do karty przenośnej TL-WN722N

Post autor: kviatek »

rfkill list all daje info, że nie znajduje polecenia

Kod: Zaznacz cały

ifconfig -a
eth0      Link encap:Ethernet  HWaddr 28:d2:44:f8:aa:c5  
          inet addr:192.168.0.10  Bcast:192.168.0.255  Mask:255.255.255.0
          inet6 addr: fe80::2ad2:44ff:fef8:aac5/64 Scope:Link
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:142721 errors:0 dropped:0 overruns:0 frame:0
          TX packets:97107 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:184768367 (176.2 MiB)  TX bytes:8643739 (8.2 MiB)

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:109 errors:0 dropped:0 overruns:0 frame:0
          TX packets:109 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:8725 (8.5 KiB)  TX bytes:8725 (8.5 KiB)

wlan0     Link encap:Ethernet  HWaddr 38:b1:db:d4:69:ed  
          inet addr:192.168.0.12  Bcast:192.168.0.255  Mask:255.255.255.0
          inet6 addr: fe80::3ab1:dbff:fed4:69ed/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:24446 errors:0 dropped:0 overruns:0 frame:42573
          TX packets:102 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:34433527 (32.8 MiB)  TX bytes:14901 (14.5 KiB)
          Interrupt:19 

wlan1     Link encap:Ethernet  HWaddr f8:d1:11:0b:02:ad  
          inet addr:192.168.0.13  Bcast:192.168.0.255  Mask:255.255.255.0
          inet6 addr: fe80::fad1:11ff:fe0b:2ad/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:7 errors:0 dropped:0 overruns:0 frame:0
          TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:1218 (1.1 KiB)  TX bytes:1902 (1.8 KiB)
Zablokowany