Na kernelu 2.6.24-1-amd64 > fdisk -l pokazuje wszsytkie dyski (4 Sata + 2 IDE)
na kernelu 2.6.25-2-amd64 > fdisk -l pokazuj tylko dyski Sata
lsmod dla tych dwoch kerneli jest nieomal taki sam.
module od plyty do Storage Chip sa zaladowane: ahci, ata_generic, pata_marvell, ide_core. Sa takie same zaladowane w dwoch przypadkach, wiec powinno dzialac, ale nie dziala.
dmesg
Kod: Zaznacz cały
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 2.6.25-2-amd64 (Debian 2.6.25-7) (maks@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Mon Jul 14 11:05:23 UTC 2008
[ 0.000000] Command line: root=/dev/sda8 ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff70000 (usable)
[ 0.000000] BIOS-e820: 00000000cff70000 - 00000000cff7e000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cff7e000 - 00000000cffd0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cffd0000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 851824) 1 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 3200 used
[ 0.000000] end_pfn_map = 1245184
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP 000FAF00, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT CFF70000, 0040 (r1 A_M_I_ OEMRSDT 6000825 MSFT 97)
[ 0.000000] ACPI: FACP CFF70200, 0084 (r2 A_M_I_ OEMFACP 6000825 MSFT 97)
[ 0.000000] ACPI: DSDT CFF70440, 963E (r1 A0986 A0986000 0 INTL 20060113)
[ 0.000000] ACPI: FACS CFF7E000, 0040
[ 0.000000] ACPI: APIC CFF70390, 006C (r1 A_M_I_ OEMAPIC 6000825 MSFT 97)
[ 0.000000] ACPI: MCFG CFF70400, 003C (r1 A_M_I_ OEMMCFG 6000825 MSFT 97)
[ 0.000000] ACPI: OEMB CFF7E040, 0081 (r1 A_M_I_ AMI_OEM 6000825 MSFT 97)
[ 0.000000] ACPI: HPET CFF79A80, 0038 (r1 A_M_I_ OEMHPET 6000825 MSFT 97)
[ 0.000000] ACPI: OSFR CFF79AC0, 00B0 (r1 A_M_I_ OEMOSFR 6000825 MSFT 97)
[ 0.000000] ACPI: SSDT CFF7E5D0, 0A7C (r1 DpgPmm CpuPm 12 INTL 20060113)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000130000000
[ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 851824) 1 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 3200 used
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000130000000
[ 0.000000] NODE_DATA [000000000000e000 - 0000000000014fff]
[ 0.000000] bootmap [0000000000015000 - 000000000003afff] pages 26
[ 0.000000] early res: 0 [0-fff] BIOS data page
[ 0.000000] early res: 1 [6000-7fff] SMP_TRAMPOLINE
[ 0.000000] early res: 2 [200000-63d2f7] TEXT DATA BSS
[ 0.000000] early res: 3 [37910000-37fefa8a] RAMDISK
[ 0.000000] early res: 4 [9dc00-a0bff] EBDA
[ 0.000000] early res: 5 [8000-dfff] PGTABLE
[ 0.000000] [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
[ 0.000000] [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
[ 0.000000] [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
[ 0.000000] [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
[ 0.000000] [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
[ 0.000000] [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
[ 0.000000] [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
[ 0.000000] [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0
[ 0.000000] [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0
[ 0.000000] [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0
[ 0.000000] [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0
[ 0.000000] [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0
[ 0.000000] [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0
[ 0.000000] [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0
[ 0.000000] [ffffe20001c00000-ffffe20001dfffff] PMD ->ffff810004a00000 on node 0
[ 0.000000] [ffffe20001e00000-ffffe20001ffffff] PMD ->ffff810004e00000 on node 0
[ 0.000000] [ffffe20002000000-ffffe200021fffff] PMD ->ffff810005200000 on node 0
[ 0.000000] [ffffe20002200000-ffffe200023fffff] PMD ->ffff810005600000 on node 0
[ 0.000000] [ffffe20002400000-ffffe200025fffff] PMD ->ffff810005a00000 on node 0
[ 0.000000] [ffffe20002600000-ffffe200027fffff] PMD ->ffff810005e00000 on node 0
[ 0.000000] [ffffe20002800000-ffffe200029fffff] PMD ->ffff810006200000 on node 0
[ 0.000000] [ffffe20002a00000-ffffe20002bfffff] PMD ->ffff810006600000 on node 0
[ 0.000000] [ffffe20002c00000-ffffe20002dfffff] PMD ->ffff810006a00000 on node 0
[ 0.000000] [ffffe20003800000-ffffe200039fffff] PMD ->ffff810006e00000 on node 0
[ 0.000000] [ffffe20003a00000-ffffe20003bfffff] PMD ->ffff810007200000 on node 0
[ 0.000000] [ffffe20003c00000-ffffe20003dfffff] PMD ->ffff810007600000 on node 0
[ 0.000000] [ffffe20003e00000-ffffe20003ffffff] PMD ->ffff810007a00000 on node 0
[ 0.000000] [ffffe20004000000-ffffe200041fffff] PMD ->ffff810007e00000 on node 0
[ 0.000000] [ffffe20004200000-ffffe200043fffff] PMD ->ffff810008200000 on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1245184
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0 -> 157
[ 0.000000] 0: 256 -> 851824
[ 0.000000] 0: 1048576 -> 1245184
[ 0.000000] On node 0 totalpages: 1048333
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1099 pages reserved
[ 0.000000] DMA zone: 2842 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 833448 pages, LIFO batch:31
[ 0.000000] Normal zone: 2688 pages used for memmap
[ 0.000000] Normal zone: 193920 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cff70000 - 00000000cff7e000
[ 0.000000] PM: Registered nosave memory: 00000000cff7e000 - 00000000cffd0000
[ 0.000000] PM: Registered nosave memory: 00000000cffd0000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d4000000 (gap: d0000000:2ee00000)
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PERCPU: Allocating 35096 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1030210
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/sda8 ro quiet
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] TSC calibrated against PM_TIMER
[ 0.000001] time.c: Detected 2999.659 MHz processor.
[ 0.002091] Console: colour VGA+ 80x25
[ 0.002093] console [tty0] enabled
[ 0.002110] Checking aperture...
[ 0.002116] Calgary: detecting Calgary via BIOS EBDA area
[ 0.002117] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.002118] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.004000] Placing software IO TLB between 0x8421000 - 0xc421000
[ 0.004000] Memory: 4056084k/4980736k available (2184k kernel code, 137248k reserved, 1012k data, 372k init)
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] hpet clockevent registered
[ 0.080006] Calibrating delay using timer specific routine.. 6003.28 BogoMIPS (lpj=12006575)
[ 0.080035] Security Framework initialized
[ 0.080038] SELinux: Disabled at boot.
[ 0.080040] Capability LSM initialized
[ 0.080281] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.081710] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.082359] Mount-cache hash table entries: 256
[ 0.082459] Initializing cgroup subsys ns
[ 0.082462] Initializing cgroup subsys cpuacct
[ 0.082475] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.082476] CPU: L2 cache: 6144K
[ 0.082478] CPU 0/0 -> Node 0
[ 0.082479] CPU: Physical Processor ID: 0
[ 0.082480] CPU: Processor Core ID: 0
[ 0.082485] CPU0: Thermal monitoring enabled (TM2)
[ 0.082486] using mwait in idle threads.
[ 0.083112] ACPI: Core revision 20070126
[ 0.139398] Using local APIC timer interrupts.
[ 0.140009] APIC timer calibration result 20830944
[ 0.140010] Detected 20.830 MHz APIC timer.
[ 0.140108] Booting processor 1/2 APIC 0x1
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 5999.29 BogoMIPS (lpj=11998595)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 6144K
[ 0.004000] CPU 1/1 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] CPU1: Thermal monitoring enabled (TM2)
[ 0.004000] Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz stepping 06
[ 0.228762] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.232047] Brought up 2 CPUs
[ 0.232110] CPU0 attaching sched-domain:
[ 0.232111] domain 0: span 00000003
[ 0.232112] groups: 00000001 00000002
[ 0.232114] domain 1: span 00000003
[ 0.232115] groups: 00000003
[ 0.232117] CPU1 attaching sched-domain:
[ 0.232118] domain 0: span 00000003
[ 0.232118] groups: 00000002 00000001
[ 0.232120] domain 1: span 00000003
[ 0.232121] groups: 00000003
[ 0.232299] net_namespace: 1016 bytes
[ 0.232302] Booting paravirtualized kernel on bare hardware
[ 0.232428] NET: Registered protocol family 16
[ 0.232551] ACPI: bus type pci registered
[ 0.232607] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
[ 0.232634] PCI: Not using MMCONFIG.
[ 0.232659] PCI: Using configuration type 1
[ 0.236674] ACPI: EC: Look up EC in DSDT
[ 0.245215] ACPI: Interpreter enabled
[ 0.245217] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.245229] ACPI: Using IOAPIC for interrupt routing
[ 0.245369] ACPI: Error attaching device data
[ 0.245420] ACPI: Error attaching device data
[ 0.245470] ACPI: Error attaching device data
[ 0.245523] ACPI: Error attaching device data
[ 0.251833] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.253057] PCI: Transparent bridge - 0000:00:1e.0
[ 0.253083] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.253239] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[ 0.253311] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.253415] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[ 0.253486] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 0.253558] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.253641] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.268810] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.268904] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.268997] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.269091] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.269184] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.269279] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.269372] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.269465] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.269572] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - BF, should be B6 [20070126]
[ 0.269597] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.269614] pnp: PnP ACPI init
[ 0.269619] ACPI: bus type pnp registered
[ 0.269737] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.269746] 00:01: calling quirk 0xffffffff8035ba3a: quirk_system_pci_resources+0x0/0x173()
[ 0.269777] pnp 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.269841] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.269874] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.269903] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.269933] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.270422] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.270517] 00:07: calling quirk 0xffffffff8035ba3a: quirk_system_pci_resources+0x0/0x173()
[ 0.270548] pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.270694] 00:08: calling quirk 0xffffffff8035ba3a: quirk_system_pci_resources+0x0/0x173()
[ 0.270725] pnp 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.270879] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.271016] pnp 00:0a: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.271084] 00:0b: calling quirk 0xffffffff8035ba3a: quirk_system_pci_resources+0x0/0x173()
[ 0.271116] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.271575] pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.271714] 00:0d: calling quirk 0xffffffff8035ba3a: quirk_system_pci_resources+0x0/0x173()
[ 0.271746] pnp 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.271891] 00:0e: calling quirk 0xffffffff8035ba3a: quirk_system_pci_resources+0x0/0x173()
[ 0.271926] pnp 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.272123] 00:0f: calling quirk 0xffffffff8035ba3a: quirk_system_pci_resources+0x0/0x173()
[ 0.272161] pnp 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.272410] pnp: PnP ACPI: found 16 devices
[ 0.272411] ACPI: ACPI bus type pnp unregistered
[ 0.272522] usbcore: registered new interface driver usbfs
[ 0.272557] usbcore: registered new interface driver hub
[ 0.272584] usbcore: registered new device driver usb
[ 0.272670] PCI: Using ACPI for IRQ routing
[ 0.272671] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 0.292047] PCI-GART: No AMD northbridge found.
[ 0.292051] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.292055] hpet0: 4 64-bit timers, 14318180 Hz
[ 0.293075] ACPI: RTC can wake from S4
[ 0.304042] pnp: the driver 'system' has been registered
[ 0.304052] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[ 0.304054] system 00:01: driver attached
[ 0.304060] system 00:07: ioport range 0x290-0x29f has been reserved
[ 0.304062] system 00:07: driver attached
[ 0.304066] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.304069] system 00:08: ioport range 0x800-0x87f has been reserved
[ 0.304071] system 00:08: ioport range 0x500-0x57f has been reserved
[ 0.304073] system 00:08: iomem range 0xfed08000-0xfed08fff has been reserved
[ 0.304076] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.304078] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.304081] system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved
[ 0.304082] system 00:08: driver attached
[ 0.304088] system 00:0b: iomem range 0xffc00000-0xffdfffff has been reserved
[ 0.304089] system 00:0b: driver attached
[ 0.304094] system 00:0d: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.304097] system 00:0d: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 0.304099] system 00:0d: driver attached
[ 0.304103] system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.304105] system 00:0e: driver attached
[ 0.304109] system 00:0f: iomem range 0x0-0x9ffff could not be reserved
[ 0.304112] system 00:0f: iomem range 0xc0000-0xcffff has been reserved
[ 0.304115] system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
[ 0.304118] system 00:0f: iomem range 0x100000-0xcfffffff could not be reserved
[ 0.304120] system 00:0f: iomem range 0x0-0x0 could not be reserved
[ 0.304122] system 00:0f: driver attached
[ 0.304392] PCI: Bridge: 0000:00:06.0
[ 0.304394] IO window: b000-bfff
[ 0.304396] MEM window: 0xfe700000-0xfe7fffff
[ 0.304398] PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
[ 0.304400] PCI: Bridge: 0000:00:1c.0
[ 0.304401] IO window: disabled.
[ 0.304403] MEM window: disabled.
[ 0.304406] PREFETCH window: 0x00000000fdf00000-0x00000000fdffffff
[ 0.304409] PCI: Bridge: 0000:00:1c.3
[ 0.304410] IO window: disabled.
[ 0.304413] MEM window: 0xfea00000-0xfeafffff
[ 0.304415] PREFETCH window: disabled.
[ 0.304419] PCI: Bridge: 0000:00:1c.4
[ 0.304420] IO window: d000-dfff
[ 0.304423] MEM window: 0xfe900000-0xfe9fffff
[ 0.304425] PREFETCH window: disabled.
[ 0.304429] PCI: Bridge: 0000:00:1c.5
[ 0.304430] IO window: c000-cfff
[ 0.304433] MEM window: 0xfe800000-0xfe8fffff
[ 0.304435] PREFETCH window: disabled.
[ 0.304439] PCI: Bridge: 0000:00:1e.0
[ 0.304441] IO window: e000-efff
[ 0.304444] MEM window: 0xfeb00000-0xfebfffff
[ 0.304446] PREFETCH window: 0x00000000f0000000-0x00000000f00fffff
[ 0.304455] ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.304458] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 0.304469] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 0.304472] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.304484] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
[ 0.304487] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 0.304498] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
[ 0.304500] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 0.304511] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 16
[ 0.304514] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 0.304521] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.304537] NET: Registered protocol family 2
[ 0.340169] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.340851] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.342859] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.343189] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.343191] TCP reno registered
[ 0.352201] checking if image is initramfs...<7>Switched to high resolution mode on CPU 1
[ 0.504051] Switched to high resolution mode on CPU 0
[ 0.546084] it is
[ 0.750778] Freeing initrd memory: 7038k freed
[ 0.520188] audit: initializing netlink socket (disabled)
[ 0.520199] type=2000 audit(1218308733.752:1): initialized
[ 0.520427] Total HugeTLB memory allocated, 0
[ 0.520486] VFS: Disk quotas dquot_6.5.1
[ 0.520504] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.520559] io scheduler noop registered
[ 0.520560] io scheduler anticipatory registered
[ 0.520561] io scheduler deadline registered
[ 0.520568] io scheduler cfq registered (default)
[ 0.520670] pci 0000:01:00.0: Boot video device
[ 0.520733] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 0.520749] assign_interrupt_mode Found MSI capability
[ 0.520765] Allocate Port Service[0000:00:06.:p cie00]
[ 0.520813] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.520833] assign_interrupt_mode Found MSI capability
[ 0.520855] Allocate Port Service[0000:00:1c.:p cie00]
[ 0.520878] Allocate Port Service[0000:00:1c.:p cie02]
[ 0.520932] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 0.520953] assign_interrupt_mode Found MSI capability
[ 0.520975] Allocate Port Service[0000:00:1c.3 :p cie00]
[ 0.520997] Allocate Port Service[0000:00:1c.3 :p cie02]
[ 0.521050] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 0.521071] assign_interrupt_mode Found MSI capability
[ 0.521093] Allocate Port Service[0000:00:1c.4 :p cie00]
[ 0.521115] Allocate Port Service[0000:00:1c.4 :p cie02]
[ 0.521170] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 0.521191] assign_interrupt_mode Found MSI capability
[ 0.521213] Allocate Port Service[0000:00:1c.5 :p cie00]
[ 0.521234] Allocate Port Service[0000:00:1c.5 :p cie02]
[ 0.522880] Real Time Clock Driver v1.12ac
[ 0.522994] hpet_resources: 0xfed00000 is busy
[ 0.523029] Linux agpgart interface v0.103
[ 0.523031] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 0.523127] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.523258] pnp: the driver 'serial' has been registered
[ 0.523419] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.523446] serial 00:0c: driver attached
[ 0.523938] brd: module loaded
[ 0.523977] input: Macintosh mouse button emulation as /class/input/input0
[ 0.524032] pnp: the driver 'i8042 kbd' has been registered
[ 0.524058] pnp: the driver 'i8042 aux' has been registered
[ 0.524100] pnp: the driver 'i8042 kbd' has been unregistered
[ 0.524117] pnp: the driver 'i8042 aux' has been unregistered
[ 0.524118] PNP: No PS/2 controller found. Probing ports directly.
[ 0.759300] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.759303] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.776234] mice: PS/2 mouse device common for all mice
[ 0.776260] cpuidle: using governor ladder
[ 0.776262] cpuidle: using governor menu
[ 0.776482] TCP cubic registered
[ 0.776488] NET: Registered protocol family 1
[ 0.776494] NET: Registered protocol family 17
[ 0.776565] registered taskstats version 1
[ 0.776642] Freeing unused kernel memory: 372k freed
[ 0.823729] ACPI: SSDT CFF7E0D0, 0277 (r1 DpgPmm P001Ist 11 INTL 20060113)
[ 0.823946] ACPI: ACPI0007:00 is registered as cooling_device0
[ 0.824221] ACPI: SSDT CFF7E350, 0277 (r1 DpgPmm P002Ist 12 INTL 20060113)
[ 0.824420] ACPI: ACPI0007:01 is registered as cooling_device1
[ 0.975995] USB Universal Host Controller Interface driver v3.0
[ 0.976021] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.976027] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 0.976030] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.976125] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.976149] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800
[ 0.976227] usb usb1: configuration #1 chosen from 1 choice
[ 0.976241] hub 1-0:1.0: USB hub found
[ 0.976244] hub 1-0:1.0: 2 ports detected
[ 1.006309] Uniform Multi-Platform E-IDE driver
[ 1.006312] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 0.843262] Floppy drive(s): fd0 is 1.44M
[ 1.080167] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.080169] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.080171] usb usb1: Product: UHCI Host Controller
[ 1.080173] usb usb1: Manufacturer: Linux 2.6.25-2-amd64 uhci_hcd
[ 1.080174] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.080208] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
[ 1.080214] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 1.080216] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.080247] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 1.080269] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880
[ 1.080331] usb usb2: configuration #1 chosen from 1 choice
[ 1.080345] hub 2-0:1.0: USB hub found
[ 1.080348] hub 2-0:1.0: 2 ports detected
[ 0.859696] FDC 0 is a post-1991 82077
[ 1.140143] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.140145] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.140147] usb usb2: Product: UHCI Host Controller
[ 1.140149] usb usb2: Manufacturer: Linux 2.6.25-2-amd64 uhci_hcd
[ 1.140150] usb usb2: SerialNumber: 0000:00:1a.1
[ 1.140173] ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 1.140179] PCI: Setting latency timer of device 0000:00:1a.2 to 64
[ 1.140182] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.140219] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
[ 1.140239] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000ac00
[ 1.140299] usb usb3: configuration #1 chosen from 1 choice
[ 1.140313] hub 3-0:1.0: USB hub found
[ 1.140316] hub 3-0:1.0: 2 ports detected
[ 1.164140] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.164142] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.164144] usb usb3: Product: UHCI Host Controller
[ 1.164146] usb usb3: Manufacturer: Linux 2.6.25-2-amd64 uhci_hcd
[ 1.164147] usb usb3: SerialNumber: 0000:00:1a.2
[ 1.164226] ACPI: PCI Interrupt 0000:06:03.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 0.920079] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
[ 0.920079] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 0.920079] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.920079] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 4
[ 0.923663] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.923667] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[ 0.923669] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe6ffc00
[ 0.936086] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 0.936160] usb usb4: configuration #1 chosen from 1 choice
[ 0.936182] hub 4-0:1.0: USB hub found
[ 0.936188] hub 4-0:1.0: 6 ports detected
[ 1.208099] firewire_ohci: Added fw-ohci device 0000:06:03.0, OHCI version 1.0
[ 0.976133] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.976136] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.976138] usb usb4: Product: EHCI Host Controller
[ 0.976139] usb usb4: Manufacturer: Linux 2.6.25-2-amd64 ehci_hcd
[ 0.976141] usb usb4: SerialNumber: 0000:00:1a.7
[ 0.976170] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[ 0.976177] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 0.976180] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.976212] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 0.983600] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.983604] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 0.983609] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe6ff800
[ 0.996090] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 0.996169] usb usb5: configuration #1 chosen from 1 choice
[ 0.996190] hub 5-0:1.0: USB hub found
[ 0.996200] hub 5-0:1.0: 6 ports detected
[ 1.012138] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.012141] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.012143] usb usb5: Product: EHCI Host Controller
[ 1.012144] usb usb5: Manufacturer: Linux 2.6.25-2-amd64 ehci_hcd
[ 1.012146] usb usb5: SerialNumber: 0000:00:1d.7
[ 1.276098] ACPI: PCI Interrupt 0000:06:02.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 1.276098] skge 1.13 addr 0xfebfc000 irq 18 chip Yukon-Lite rev 9
[ 1.276098] skge eth0: addr 00:22:15:05:df:2a
[ 1.276098] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 1.276098] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 1.276098] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.276098] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.276098] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a080
[ 1.276098] usb usb6: configuration #1 chosen from 1 choice
[ 1.276098] hub 6-0:1.0: USB hub found
[ 1.276098] hub 6-0:1.0: 2 ports detected
[ 1.276098] No dock devices found.
[ 1.279019] SCSI subsystem initialized
[ 1.282499] libata version 3.00 loaded.
[ 1.290060] udev: renamed network interface eth0 to eth1
[ 1.340164] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.340167] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.340169] usb usb6: Product: UHCI Host Controller
[ 1.340170] usb usb6: Manufacturer: Linux 2.6.25-2-amd64 uhci_hcd
[ 1.340172] usb usb6: SerialNumber: 0000:00:1d.0
[ 1.340198] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 1.340206] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 1.340208] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.340242] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.340261] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400
[ 1.340323] usb usb7: configuration #1 chosen from 1 choice
[ 1.340338] hub 7-0:1.0: USB hub found
[ 1.340341] hub 7-0:1.0: 2 ports detected
[ 1.360114] hub 5-0:1.0: unable to enumerate USB device on port 1
[ 1.364153] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.364155] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.364157] usb usb7: Product: UHCI Host Controller
[ 1.364158] usb usb7: Manufacturer: Linux 2.6.25-2-amd64 uhci_hcd
[ 1.364160] usb usb7: SerialNumber: 0000:00:1d.1
[ 1.364181] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 1.364186] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 1.364189] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.364227] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.364245] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a480
[ 1.364303] usb usb8: configuration #1 chosen from 1 choice
[ 1.364316] hub 8-0:1.0: USB hub found
[ 1.364323] hub 8-0:1.0: 2 ports detected
[ 1.392155] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.392158] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.392160] usb usb8: Product: UHCI Host Controller
[ 1.392161] usb usb8: Manufacturer: Linux 2.6.25-2-amd64 uhci_hcd
[ 1.392163] usb usb8: SerialNumber: 0000:00:1d.2
[ 1.392783] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 1.392791] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 1.392812] sky2 0000:02:00.0: v1.21 addr 0xfe8fc000 irq 17 Yukon-EC Ultra (0xb4) rev 3
[ 1.394023] sky2 eth0: addr 00:22:15:05:05:49
[ 1.394043] ahci 0000:03:00.0: version 3.0
[ 1.394055] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 1.394067] ahci 0000:03:00.0: controller can't do NCQ, turning off CAP_NCQ
[ 1.394068] ahci 0000:03:00.0: MV_AHCI HACK: port_map 7 -> 3
[ 1.412145] firewire_core: created device fw0: GUID 001e8c000147f5c7, S400
[ 1.160103] usb 5-2: new high speed USB device using ehci_hcd and address 3
[ 1.501012] usb 5-2: configuration #1 chosen from 1 choice
[ 1.501192] usb 5-2: New USB device found, idVendor=059f, idProduct=0651
[ 1.501194] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.501195] usb 5-2: Product: LaCie Hard Drive USB
[ 1.501196] usb 5-2: Manufacturer: LaCie
[ 1.501197] usb 5-2: SerialNumber: 10000E000D3E70EC
[ 1.511765] Initializing USB Mass Storage driver...
[ 1.572128] hub 5-0:1.0: unable to enumerate USB device on port 4
[ 1.604124] usb 5-5: new high speed USB device using ehci_hcd and address 5
[ 1.212098] usb 5-5: configuration #1 chosen from 1 choice
[ 1.212098] usb 5-5: New USB device found, idVendor=03f0, idProduct=2b17
[ 1.212098] usb 5-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.212098] usb 5-5: Product: HP LaserJet 1020
[ 1.212098] usb 5-5: Manufacturer: Hewlett-Packard
[ 1.212098] usb 5-5: SerialNumber: JL14BW7
[ 1.684153] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 3 ports 3 Gbps 0x3 impl IDE mode
[ 1.684156] ahci 0000:03:00.0: flags: 64bit stag led pmp slum part
[ 1.684161] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 1.684266] scsi0 : ahci
[ 1.684302] scsi1 : ahci
[ 1.684328] scsi2 : ahci
[ 1.684346] ata1: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffd00 irq 16
[ 1.684348] ata2: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffd80 irq 16
[ 1.684349] ata3: DUMMY
[ 1.276107] usb 6-1: new low speed USB device using uhci_hcd and address 2
[ 1.709761] usb 6-1: configuration #1 chosen from 1 choice
[ 1.712769] usb 6-1: New USB device found, idVendor=09da, idProduct=021f
[ 1.712771] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.712772] usb 6-1: Product: RF USB Receiver
[ 1.712773] usb 6-1: Manufacturer: A4Tech
[ 1.784146] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.816137] usb 7-2: new low speed USB device using uhci_hcd and address 2
[ 1.384123] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.384161] ata_piix 0000:00:1f.2: version 2.12
[ 1.384179] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 1.384183] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.384214] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 1.384247] scsi3 : ata_piix
[ 1.384274] scsi4 : ata_piix
[ 1.388961] ata4: SATA max UDMA/133 cmd 0x9000 ctl 0x8c00 bmdma 0x8480 irq 19
[ 1.388964] ata5: SATA max UDMA/133 cmd 0x8880 ctl 0x8800 bmdma 0x8488 irq 19
[ 1.844134] usb 7-2: configuration #1 chosen from 1 choice
[ 1.844360] usb 7-2: New USB device found, idVendor=0dc6, idProduct=3401
[ 1.844361] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.844363] usb 7-2: Product: SCISSORS Keyboard
[ 1.844364] usb 7-2: Manufacturer:
[ 1.888194] scsi5 : SCSI emulation for USB Mass Storage devices
[ 1.464113] usb-storage: device found at 3
[ 1.464113] usb-storage: waiting for device to settle before scanning
[ 1.888260] usbcore: registered new interface driver usb-storage
[ 1.888262] USB Mass Storage support registered.
[ 1.888275] usbcore: registered new interface driver hiddev
[ 1.902886] input: A4Tech RF USB Receiver as /class/input/input1
[ 1.932162] input,hidraw0: USB HID v1.11 Keyboard [A4Tech RF USB Receiver] on usb-0000:00:1d.0-1
[ 1.536118] input: A4Tech RF USB Receiver as /class/input/input2
[ 1.556149] input,hidraw1: USB HID v1.11 Mouse [A4Tech RF USB Receiver] on usb-0000:00:1d.0-1
[ 1.570981] input: SCISSORS Keyboard as /class/input/input3
[ 1.584142] input,hidraw2: USB HID v1.00 Keyboard [ SCISSORS Keyboard] on usb-0000:00:1d.1-2
[ 1.584154] usbcore: registered new interface driver usbhid
[ 1.584157] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 1.636167] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.652976] ata4.00: ATA-7: WDC WD1500ADFD-00NLR5, 21.07QR5, max UDMA/133
[ 1.652979] ata4.00: 293046768 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.652996] ata4.01: ATAPI: ATAPI DVD A DH16A1L, KH3B, max UDMA/100
[ 2.056147] ata4.00: configured for UDMA/133
[ 2.068327] ata4.01: configured for UDMA/100
[ 1.704168] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.716129] ata5.00: ATA-8: WDC WD10EACS-00ZJB0, 01.01B01, max UDMA/133
[ 1.716129] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.088149] ata5.01: ATA-8: ST3500620AS, SD36, max UDMA/133
[ 2.088149] ata5.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.716129] ata5.00: configured for UDMA/133
[ 2.096150] ata5.01: configured for UDMA/133
[ 1.720778] scsi 3:0:0:0: Direct-Access ATA WDC WD1500ADFD-0 21.0 PQ: 0 ANSI: 5
[ 1.721953] scsi 3:0:1:0: CD-ROM ATAPI DVD A DH16A1L KH3B PQ: 0 ANSI: 5
[ 1.722052] scsi 4:0:0:0: Direct-Access ATA WDC WD10EACS-00Z 01.0 PQ: 0 ANSI: 5
[ 1.722112] scsi 4:0:1:0: Direct-Access ATA ST3500620AS SD36 PQ: 0 ANSI: 5
[ 1.722157] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 19
[ 1.722160] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 1.722183] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 1.722205] scsi6 : ata_piix
[ 1.722231] scsi7 : ata_piix
[ 1.723157] ata6: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 19
[ 1.723160] ata7: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 19
[ 1.784154] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.132152] ata6.00: ATA-8: ST3500620AS, SD36, max UDMA/133
[ 2.132152] ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.792134] ata6.00: configured for UDMA/133
[ 1.828148] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.832178] scsi 6:0:0:0: Direct-Access ATA ST3500620AS SD36 PQ: 0 ANSI: 5
[ 1.842206] Driver 'sr' needs updating - please use bus_type methods
[ 2.160493] Driver 'sd' needs updating - please use bus_type methods
[ 2.162839] sd 3:0:0:0: [sda] 293046768 512-byte hardware sectors (150040 MB)
[ 1.847979] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.847981] Uniform CD-ROM driver Revision: 3.20
[ 1.848010] sr 3:0:1:0: Attached scsi CD-ROM sr0
[ 2.166003] sd 3:0:0:0: [sda] Write Protect is off
[ 2.166004] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.166019] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.166048] sd 3:0:0:0: [sda] 293046768 512-byte hardware sectors (150040 MB)
[ 2.166054] sd 3:0:0:0: [sda] Write Protect is off
[ 2.166056] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.166067] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.166069] sda: sda1 sda2 <<5>sd 3:0:0:0: Attached scsi generic sg0 type 0
[ 1.858804] sr 3:0:1:0: Attached scsi generic sg1 type 5
[ 1.858815] scsi 4:0:0:0: Attached scsi generic sg2 type 0
[ 1.858827] scsi 4:0:1:0: Attached scsi generic sg3 type 0
[ 1.858838] scsi 6:0:0:0: Attached scsi generic sg4 type 0
[ 2.179120] sda5 sda6 sda7 sda8 > sda3
[ 1.893919] sd 3:0:0:0: [sda] Attached SCSI disk
[ 1.893949] sd 4:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB)
[ 1.893957] sd 4:0:0:0: [sdb] Write Protect is off
[ 1.893958] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.893970] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.893997] sd 4:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB)
[ 1.894004] sd 4:0:0:0: [sdb] Write Protect is off
[ 1.894005] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.894017] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.894018] sdb: sdb1
[ 1.902845] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 1.902889] sd 4:0:1:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
[ 1.902900] sd 4:0:1:0: [sdc] Write Protect is off
[ 1.902902] sd 4:0:1:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.902920] sd 4:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.902956] sd 4:0:1:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
[ 1.902966] sd 4:0:1:0: [sdc] Write Protect is off
[ 1.902968] sd 4:0:1:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.902986] sd 4:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.902987] sdc: sdc1
[ 1.904530] sd 4:0:1:0: [sdc] Attached SCSI disk
[ 1.904573] sd 6:0:0:0: [sdd] 976773168 512-byte hardware sectors (500108 MB)
[ 1.904588] sd 6:0:0:0: [sdd] Write Protect is off
[ 1.904589] sd 6:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 1.904601] sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.904625] sd 6:0:0:0: [sdd] 976773168 512-byte hardware sectors (500108 MB)
[ 1.904632] sd 6:0:0:0: [sdd] Write Protect is off
[ 1.904633] sd 6:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 1.904645] sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.904646] sdd: sdd1
[ 1.907858] sd 6:0:0:0: [sdd] Attached SCSI disk
[ 2.454377] PM: Starting manual resume from disk
[ 2.153064] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 2.153409] SGI XFS Quota Management subsystem
[ 2.490435] XFS mounting filesystem sda8
[ 2.200160] Starting XFS recovery on filesystem: sda8 (logdev: internal)
[ 2.229461] Ending XFS recovery on filesystem: sda8 (logdev: internal)
[ 3.461773] input: Power Button (FF) as /class/input/input4
[ 3.512272] ACPI: Power Button (FF) [PWRF]
[ 3.512324] input: Power Button (CM) as /class/input/input5
[ 3.572269] ACPI: Power Button (CM) [PWRB]
[ 3.781856] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17
[ 3.781866] usbcore: registered new interface driver usblp
[ 3.894772] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 3.894781] PCI: Setting latency timer of device 0000:04:00.0 to 64
[ 3.894797] ath5k_pci 0000:04:00.0: registered as 'phy0'
[ 4.904777] ath5k phy0: failed to resume the MAC Chip
[ 4.904844] ACPI: PCI interrupt for device 0000:04:00.0 disabled
[ 4.904850] ath5k_pci: probe of 0000:04:00.0 failed with error -5
[ 4.908541] usb-storage: device scan complete
[ 5.292204] ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 18
[ 4.912452] scsi 5:0:0:0: Direct-Access SEAGATE ST3500830A 3.AA PQ: 0 ANSI: 2
[ 5.304807] sd 5:0:0:0: [sde] 976773168 512-byte hardware sectors (500108 MB)
[ 5.315305] sd 5:0:0:0: [sde] Write Protect is off
[ 5.315307] sd 5:0:0:0: [sde] Mode Sense: 53 00 00 08
[ 5.315309] sd 5:0:0:0: [sde] Assuming drive cache: write through
[ 5.316302] sd 5:0:0:0: [sde] 976773168 512-byte hardware sectors (500108 MB)
[ 5.317182] sd 5:0:0:0: [sde] Write Protect is off
[ 5.317183] sd 5:0:0:0: [sde] Mode Sense: 53 00 00 08
[ 5.317184] sd 5:0:0:0: [sde] Assuming drive cache: write through
[ 5.317213] sde: sde1
[ 5.321342] sd 5:0:0:0: [sde] Attached SCSI disk
[ 5.321366] sd 5:0:0:0: Attached scsi generic sg5 type 0
[ 5.007541] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 5.007557] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 5.288615] ACPI: PCI Interrupt 0000:01:00.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 5.288631] PCI: Setting latency timer of device 0000:01:00.1 to 64
[ 6.260914] Adding 976440k swap on /dev/sda3. Priority:-1 extents:1 across:976440k
[ 7.384195] loop: module loaded
[ 7.658130] kjournald starting. Commit interval 5 seconds
[ 7.665222] EXT3 FS on sda1, internal journal
[ 7.665224] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.416486] XFS mounting filesystem sda6
[ 7.744504] Starting XFS recovery on filesystem: sda6 (logdev: internal)
[ 7.448489] Ending XFS recovery on filesystem: sda6 (logdev: internal)
[ 7.772506] XFS mounting filesystem sda5
[ 7.788507] Ending clean XFS mount for filesystem: sda5
[ 7.816509] XFS mounting filesystem sda7
[ 7.532495] Starting XFS recovery on filesystem: sda7 (logdev: internal)
[ 7.852511] Ending XFS recovery on filesystem: sda7 (logdev: internal)
[ 8.496555] sky2 eth0: enabling interface
[ 9.820194] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 10.139575] pnp: the driver 'parport_pc' has been registered
[ 10.536752] lp: driver loaded but no devices found
[ 10.569432] ppdev: user-space parallel port driver
[ 10.333982] NET: Registered protocol family 10
[ 10.334269] lo: Disabled Privacy Extensions
[ 11.436736] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 12.890035] Bluetooth: Core ver 2.11
[ 12.890355] NET: Registered protocol family 31
[ 12.890357] Bluetooth: HCI device and connection manager initialized
[ 12.890359] Bluetooth: HCI socket layer initialized
[ 12.898349] Bluetooth: L2CAP ver 2.9
[ 12.898351] Bluetooth: L2CAP socket layer initialized
[ 12.934621] Bluetooth: RFCOMM socket layer initialized
[ 12.934626] Bluetooth: RFCOMM TTY layer initialized
[ 12.934627] Bluetooth: RFCOMM ver 1.8
[ 13.251971] skge eth1: enabling interface
[ 13.255475] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 15.857015] eth0: no IPv6 routers present
[ 18.020759] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 24.889420] fuse init (API version 7.9)
[ 166.794592] Machine check events loggedPlyta glowna Asus P5Q-E z Additional Storage Chip Marvell 88SE6121 controller & Additional Storage Chip Silicon Image SIL5723 controller (Drive Xpert)
Dziekuje za odpowiedzi.
[ Dodano: 2008-08-13, 22:28 ]
widze ze nikt nie wiem o co chodzi. WIdac Debian nie bardzo radzi sobie z AHCI. Trzeba sie pobawic jadrem systemu troche.
Dla innych podam ze w opcja ahci ustawiona w biosie i skompilowaniu jadra z opcjami dla nowych plyt z P45 > dyski ladnie chodza wszyskie.
Jednak AHCI trzeba ustawic dopiero jak sie zrobi system, bo inaczej nie dziala bootowanie systemu na AHCI, wiec ustawiamy IDE, kompiluje i zmieniamy w biosie.