Stary laptop Aristo - nie działa ACPI

Wszystko związane z jądrem systemowym, sterownikami, sprzętem itp.
tokirium
Posty: 39
Rejestracja: 02 czerwca 2016, 12:56

Stary laptop Aristo - nie działa ACPI

Post autor: tokirium »

Mam laptopa Aristo, model 6120 ale trochę trudno zidentyfikować bo firma upadła i ten model był później pod inną marką i nazwą, chyba MAXDATA Vision 440T. Podczas startu pojawia się między innymi taki błąd.

Kod: Zaznacz cały

ACPI: Vendor "INT440" System "SYSFexxx" Revision 0x1001 has a known ACPI BIOS problem.
gru 04 18:07:52 aristo kernel: ACPI: Reason: Does not use _REG to protect EC OpRegions. This is a non-recoverable error
gru 04 18:07:52 aristo kernel: ACPI: Disabling ACPI support
Po zamknięciu systemu komputer nie wyłącza się automatycznie - muszę ręcznie wyłączyć wyłącznikiem po komunikacie "system haltet"d.
uname -a :

Kod: Zaznacz cały

Linux aristo 3.16.0-4-686-pae #1 SMP Debian 3.16.36-1+deb8u2 (2016-10-19) i686 GNU/Linux
lspci -k :

Kod: Zaznacz cały

00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
	Subsystem: Mitac Device 7190
	Kernel driver in use: agpgart-intel
00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
00:07.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
	Kernel driver in use: ata_piix
00:07.2 USB controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01)
	Kernel driver in use: uhci_hcd
00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02)
	Kernel driver in use: piix4_smbus
00:08.0 CardBus bridge: Texas Instruments PCI1225 (rev 01)
	Subsystem: Mitac Device ac1c
	Kernel driver in use: yenta_cardbus
00:08.1 CardBus bridge: Texas Instruments PCI1225 (rev 01)
	Subsystem: Mitac Device ac1c
	Kernel driver in use: yenta_cardbus
00:09.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24/30 [CrystalClear SoundFusion Audio Accelerator] (rev 01)
	Subsystem: Mitac Device 6003
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] 3D Rage LT PRO AGP 2X (rev dc)
	Subsystem: Mitac Device 4c42
journalctl (usunąłem daty i godziny żeby oszczędzić ilość znaków):

Kod: Zaznacz cały

-- Logs begin at nie 2016-12-04 18:07:52 CET, end at nie 2016-12-04 19:01:17 CET. --
... systemd-journal[143]: Runtime journal is using 4.0M (max allowed 8.0M, trying to leave 8.3M free of 51.4M available → current limit 8.0M).
... systemd-journal[143]: Runtime journal is using 4.0M (max allowed 8.0M, trying to leave 8.3M free of 51.4M available → current limit 8.0M).
... kernel: Initializing cgroup subsys cpuset
... kernel: Initializing cgroup subsys cpu
... kernel: Initializing cgroup subsys cpuacct
... kernel: Linux version 3.16.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.36-1+deb8u2 (2016-10-19)
... kernel: e820: BIOS-provided physical RAM map:
... kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
... kernel: BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
... kernel: BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
... kernel: BIOS-e820: [mem 0x0000000000100000-0x0000000011feffff] usable
... kernel: BIOS-e820: [mem 0x0000000011ff0000-0x0000000011ffffbf] ACPI data
... kernel: BIOS-e820: [mem 0x0000000011ffffc0-0x0000000011ffffff] ACPI NVS
... kernel: BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
... kernel: Notice: NX (Execute Disable) protection missing in CPU!
... kernel: SMBIOS 2.3 present.
... kernel: DMI: MiTAC            6120            /6120            , BIOS Version R1.08  02/29/2000
... kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
... kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
... kernel: e820: last_pfn = 0x11ff0 max_arch_pfn = 0x1000000
... kernel: MTRR default type: uncachable
... kernel: MTRR fixed ranges enabled:
... kernel:   00000-9FFFF write-back
... kernel:   A0000-BFFFF uncachable
... kernel:   C0000-CFFFF write-protect
... kernel:   D0000-E7FFF uncachable
... kernel:   E8000-FFFFF write-protect
... kernel: MTRR variable ranges enabled:
... kernel:   0 base 000000000 mask FF0000000 write-back
... kernel:   1 base 010000000 mask FFE000000 write-back
... kernel:   2 disabled
... kernel:   3 disabled
... kernel:   4 disabled
... kernel:   5 disabled
... kernel:   6 disabled
... kernel:   7 disabled
... kernel: PAT not supported by CPU.
... kernel: initial memory mapped: [mem 0x00000000-0x01bfffff]
... kernel: Base memory trampoline at [c009b000] 9b000 size 16384
... kernel: init_memory_mapping: [mem 0x00000000-0x000fffff]
... kernel:  [mem 0x00000000-0x000fffff] page 4k
... kernel: init_memory_mapping: [mem 0x11c00000-0x11dfffff]
... kernel:  [mem 0x11c00000-0x11dfffff] page 2M
... kernel: init_memory_mapping: [mem 0x10000000-0x11bfffff]
... kernel:  [mem 0x10000000-0x11bfffff] page 2M
... kernel: init_memory_mapping: [mem 0x00100000-0x0fffffff]
... kernel:  [mem 0x00100000-0x001fffff] page 4k
... kernel:  [mem 0x00200000-0x0fffffff] page 2M
... kernel: init_memory_mapping: [mem 0x11e00000-0x11feffff]
... kernel:  [mem 0x11e00000-0x11feffff] page 4k
... kernel: BRK [0x017a1000, 0x017a1fff] PGTABLE
... kernel: BRK [0x017a2000, 0x017a3fff] PGTABLE
... kernel: BRK [0x017a4000, 0x017a4fff] PGTABLE
... kernel: BRK [0x017a5000, 0x017a5fff] PGTABLE
... kernel: RAMDISK: [mem 0x10aff000-0x118adfff]
... kernel: ACPI: Early table checksum verification disabled
... kernel: ACPI: RSDP 0x00000000000F0010 000014 (v00 OID_00)
... kernel: ACPI: RSDT 0x0000000011FFFBD0 00002C (v01 OID_00 RSDT_000 30303030 ?&   00010000)
... kernel: ACPI: FACP 0x0000000011FFFB20 000074 (v01 OID_00 FACP_000 30303030 ?&   00010000)
... kernel: ACPI: DSDT 0x0000000011FFCC50 002ECE (v01 INT440 SYSFexxx 00001001 MSFT 0100000B)
... kernel: ACPI: FACS 0x0000000011FFFFC0 000040
... kernel: ACPI: BOOT 0x0000000011FFFBA0 000026 (v01 OID_00 BOOT_000 30303030 ?&   00010000)
... kernel: ACPI: Vendor "INT440" System "SYSFexxx" Revision 0x1001 has a known ACPI BIOS problem.
... kernel: ACPI: Reason: Does not use _REG to protect EC OpRegions. This is a non-recoverable error
... kernel: ACPI: Disabling ACPI support
... kernel: 0MB HIGHMEM available.
... kernel: 287MB LOWMEM available.
... kernel:   mapped low ram: 0 - 11ff0000
... kernel:   low ram: 0 - 11ff0000
... kernel: BRK [0x017a6000, 0x017a6fff] PGTABLE
... kernel: Zone ranges:
... kernel:   DMA      [mem 0x00001000-0x00ffffff]
... kernel:   Normal   [mem 0x01000000-0x11feffff]
... kernel:   HighMem  empty
... kernel: Movable zone start for each node
... kernel: Early memory node ranges
... kernel:   node   0: [mem 0x00001000-0x0009efff]
... kernel:   node   0: [mem 0x00100000-0x11feffff]
... kernel: On node 0 totalpages: 73614
... kernel: free_area_init_node: node 0, pgdat c1661280, node_mem_map d1db0020
... kernel:   DMA zone: 32 pages used for memmap
... kernel:   DMA zone: 0 pages reserved
... kernel:   DMA zone: 3998 pages, LIFO batch:0
... kernel:   Normal zone: 544 pages used for memmap
... kernel:   Normal zone: 69616 pages, LIFO batch:15
... kernel: Using APIC driver default
... kernel: SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
... kernel: smpboot: Allowing 1 CPUs, 0 hotplug CPUs
... kernel: Local APIC disabled by BIOS -- you can enable it with "lapic"
... kernel: APIC: disable apic facility
... kernel: APIC: switched to apic NOOP
... kernel: nr_irqs_gsi: 16
... kernel: PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
... kernel: PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
... kernel: PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
... kernel: e820: [mem 0x12000000-0xfffbffff] available for PCI devices
... kernel: Booting paravirtualized kernel on bare hardware
... kernel: setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
... kernel: PERCPU: Embedded 14 pages/cpu @d1d9e000 s34752 r0 d22592 u57344
... kernel: pcpu-alloc: s34752 r0 d22592 u57344 alloc=14*4096
... kernel: pcpu-alloc: [0] 0 
... kernel: Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 73038
... kernel: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-686-pae root=UUID=5a04a524-f317-4824-8549-6ff16827455a ro quiet
... kernel: PID hash table entries: 2048 (order: 1, 8192 bytes)
... kernel: Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
... kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
... kernel: Initializing CPU#0
... kernel: Initializing HighMem for node 0 (00000000:00000000)
... kernel: Memory: 269772K/294456K available (4624K kernel code, 523K rwdata, 1452K rodata, 660K init, 460K bss, 24684K reserved, 0K highmem)
... kernel: virtual kernel memory layout:
                                   fixmap  : 0xffd36000 - 0xfffff000   (2852 kB)
                                   pkmap   : 0xff600000 - 0xff800000   (2048 kB)
                                   vmalloc : 0xd27f0000 - 0xff5fe000   ( 718 MB)
                                   lowmem  : 0xc0000000 - 0xd1ff0000   ( 287 MB)
                                     .init : 0xc1675000 - 0xc171a000   ( 660 kB)
                                     .data : 0xc148473c - 0xc1673c80   (1981 kB)
                                     .text : 0xc1000000 - 0xc148473c   (4625 kB)
... kernel: Checking if this processor honours the WP bit even in supervisor mode...Ok.
... kernel: Hierarchical RCU implementation.
... kernel:         RCU dyntick-idle grace-period acceleration is enabled.
... kernel:         RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=1.
... kernel: RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
... kernel: NR_IRQS:2304 nr_irqs:256 16
... kernel: CPU 0 irqstacks, hard=d0406000 soft=d0408000
... kernel: Console: colour VGA+ 80x25
... kernel: console [tty0] enabled
... kernel: tsc: Fast TSC calibration using PIT
... kernel: tsc: Detected 464.529 MHz processor
... kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 929.05 BogoMIPS (lpj=1858116)
... kernel: pid_max: default: 32768 minimum: 301
... kernel: Security Framework initialized
... kernel: AppArmor: AppArmor disabled by boot time parameter
... kernel: Yama: disabled by default; enable with sysctl kernel.yama.*
... kernel: Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
... kernel: Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
... kernel: Initializing cgroup subsys memory
... kernel: Initializing cgroup subsys devices
... kernel: Initializing cgroup subsys freezer
... kernel: Initializing cgroup subsys net_cls
... kernel: Initializing cgroup subsys blkio
... kernel: Initializing cgroup subsys perf_event
... kernel: Initializing cgroup subsys net_prio
... kernel: mce: CPU supports 5 MCE banks
... kernel: Last level iTLB entries: 4KB 32, 2MB 0, 4MB 2
                               Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
                               tlb_flushall_shift: 6
... kernel: Freeing SMP alternatives memory: 20K (c171a000 - c171f000)
... kernel: ftrace: allocating 20830 entries in 41 pages
... kernel: smpboot: weird, boot CPU (#0) not listed by the BIOS
... kernel: smpboot: SMP motherboard not detected
... kernel: smpboot: Local APIC not detected. Using dummy APIC emulation.
... kernel: smpboot: SMP disabled
... kernel: Performance Events: 
... kernel: no APIC, boot with the "lapic" boot parameter to force-enable it.
... kernel: no hardware sampling interrupt available.
... kernel: Broken PMU hardware detected, using software events only.
... kernel: Failed to access perfctr msr (MSR c1 is 1fff9ab93b2)
... kernel: x86: Booted up 1 node, 1 CPUs
... kernel: smpboot: Total of 1 processors activated (929.05 BogoMIPS)
... kernel: NMI watchdog: disabled (cpu0): hardware events not enabled
... kernel: devtmpfs: initialized
... kernel: PM: Registering ACPI NVS region [mem 0x11ffffc0-0x11ffffff] (64 bytes)
... kernel: pinctrl core: initialized pinctrl subsystem
... kernel: NET: Registered protocol family 16
... kernel: cpuidle: using governor ladder
... kernel: cpuidle: using governor menu
... kernel: PCI: PCI BIOS revision 2.10 entry at 0xeb2a0, last bus=1
... kernel: PCI: Using configuration type 1 for base access
... kernel: ACPI: Interpreter disabled.
... kernel: vgaarb: loaded
... kernel: PCI: Probing PCI hardware
... kernel: PCI: root bus 00: using default resources
... kernel: PCI: Probing PCI hardware (bus 00)
... kernel: PCI host bridge to bus 0000:00
... kernel: pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
... kernel: pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
... kernel: pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
... kernel: pci 0000:00:00.0: [8086:7190] type 00 class 0x060000
... kernel: pci 0000:00:00.0: reg 0x10: [mem 0x20000000-0x2fffffff pref]
... kernel: pci 0000:00:01.0: [8086:7191] type 01 class 0x060400
... kernel: pci 0000:00:07.0: [8086:7110] type 00 class 0x060100
... kernel: pci 0000:00:07.1: [8086:7111] type 00 class 0x010180
... kernel: pci 0000:00:07.1: reg 0x20: [io  0x1100-0x110f]
... kernel: pci 0000:00:07.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
... kernel: pci 0000:00:07.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
... kernel: pci 0000:00:07.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
... kernel: pci 0000:00:07.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
... kernel: pci 0000:00:07.2: [8086:7112] type 00 class 0x0c0300
... kernel: pci 0000:00:07.2: reg 0x20: [io  0x1040-0x105f]
... kernel: pci 0000:00:07.3: [8086:7113] type 00 class 0x068000
... kernel: * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
                               * this clock source is slow. Consider trying other clock sources
... kernel: pci 0000:00:07.3: quirk: [io  0x1000-0x103f] claimed by PIIX4 ACPI
... kernel: pci 0000:00:07.3: quirk: [io  0x1400-0x140f] claimed by PIIX4 SMB
... kernel: pci 0000:00:07.3: PIIX4 devres C PIO at 0398-0399
... kernel: pci 0000:00:08.0: [104c:ac1c] type 02 class 0x060700
... kernel: pci 0000:00:08.0: reg 0x10: [mem 0x14000000-0x14000fff]
... kernel: pci 0000:00:08.0: supports D1 D2
... kernel: pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot
... kernel: pci 0000:00:08.1: [104c:ac1c] type 02 class 0x060700
... kernel: pci 0000:00:08.1: reg 0x10: [mem 0x30000000-0x30000fff]
... kernel: pci 0000:00:08.1: supports D1 D2
... kernel: pci 0000:00:08.1: PME# supported from D0 D1 D2 D3hot
... kernel: pci 0000:00:09.0: [1013:6003] type 00 class 0x040100
... kernel: pci 0000:00:09.0: reg 0x10: [mem 0xe8000000-0xe8000fff]
... kernel: pci 0000:00:09.0: reg 0x14: [mem 0xe9000000-0xe90fffff]
... kernel: pci 0000:00:09.0: supports D1 D2
... kernel: pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot
... kernel: pci 0000:01:00.0: [1002:4c42] type 00 class 0x030000
... kernel: pci 0000:01:00.0: reg 0x10: [mem 0xe4000000-0xe4ffffff]
... kernel: pci 0000:01:00.0: reg 0x14: [io  0xd000-0xd0ff]
... kernel: pci 0000:01:00.0: reg 0x18: [mem 0xe6000000-0xe6000fff]
... kernel: pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
... kernel: pci 0000:01:00.0: supports D1 D2
... kernel: vgaarb: setting as boot device: PCI:0000:01:00.0
... kernel: vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
... kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
... kernel: pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
... kernel: pci 0000:00:01.0:   bridge window [mem 0xe4000000-0xe7ffffff]
... kernel: pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe3ffffff pref]
... kernel: pci 0000:00:08.0: bridge configuration invalid ([bus 02-00]), reconfiguring
... kernel: pci 0000:00:08.1: bridge configuration invalid ([bus 06-00]), reconfiguring
... kernel: pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 05
... kernel: pci_bus 0000:06: busn_res: [bus 06-ff] end is updated to 09
... kernel: pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 09
... kernel: pci 0000:00:07.0: PIIX/ICH IRQ router [8086:7110]
... kernel: PCI: setting IRQ 10 as level-triggered
... kernel: pci 0000:01:00.0: found PCI INT A -> IRQ 10
... kernel: pci 0000:01:00.0: sharing IRQ 10 with 0000:00:08.0
... kernel: pci 0000:01:00.0: sharing IRQ 10 with 0000:00:08.1
... kernel: PCI: pci_cache_line_size set to 32 bytes
... kernel: e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
... kernel: e820: reserve RAM buffer [mem 0x11ff0000-0x13ffffff]
... kernel: Switched to clocksource pit
... kernel: pnp: PnP ACPI: disabled
... kernel: PnPBIOS: Scanning system for PnP BIOS support...
... kernel: PnPBIOS: Found PnP BIOS installation structure at 0xc00ff020
... kernel: PnPBIOS: PnP BIOS version 1.0, entry 0xec000:0x3082, dseg 0xec000
... kernel: pnp 00:00: [mem 0x00000000-0x0009ffff]
... kernel: pnp 00:00: [mem 0x00100000-0x11feffff]
... kernel: pnp 00:00: [mem 0x11ff0000-0x11ffffff]
... kernel: pnp 00:00: [mem 0x000e8000-0x000fffff]
... kernel: pnp 00:00: [mem 0xffffffffffff0000-0xffffffffffffffff]
... kernel: pnp 00:00: [io  0x0398-0x0399]
... kernel: pnp 00:00: [io  0x0024-0x003d]
... kernel: pnp 00:00: [io  0x0062]
... kernel: pnp 00:00: [io  0x0066]
... kernel: pnp 00:00: [io  0x0090-0x009f]
... kernel: pnp 00:00: [io  0x00a4-0x00bd]
... kernel: pnp 00:00: [io  0x0230-0x0233]
... kernel: pnp 00:00: [io  0x1000-0x103f]
... kernel: pnp 00:00: [io  0x1400-0x140f]
... kernel: pnp 00:00: [io  0x3810-0x381f]
... kernel: system 00:00: [io  0x0398-0x0399] has been reserved
... kernel: system 00:00: [io  0x0230-0x0233] has been reserved
... kernel: system 00:00: [io  0x1000-0x103f] has been reserved
... kernel: system 00:00: [io  0x1400-0x140f] has been reserved
... kernel: system 00:00: [io  0x3810-0x381f] has been reserved
... kernel: system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
... kernel: system 00:00: [mem 0x00100000-0x11feffff] could not be reserved
... kernel: system 00:00: [mem 0x11ff0000-0x11ffffff] could not be reserved
... kernel: system 00:00: [mem 0x000e8000-0x000fffff] could not be reserved
... kernel: system 00:00: [mem 0xffffffffffff0000-0xffffffffffffffff] could not be reserved
... kernel: system 00:00: Plug and Play BIOS device, IDs PNP0c01 (active)
... kernel: pnp 00:01: [io  0x0cf8-0x0cff]
... kernel: pnp 00:01: [io  0x04d0-0x04d1]
... kernel: system 00:01: [io  0x0cf8-0x0cff] could not be reserved
... kernel: system 00:01: [io  0x04d0-0x04d1] has been reserved
... kernel: system 00:01: Plug and Play BIOS device, IDs PNP0c02 (active)
... kernel: pnp 00:02: [irq 13]
... kernel: pnp 00:02: [io  0x00f0-0x00ff]
... kernel: pnp 00:02: Plug and Play BIOS device, IDs PNP0c04 (active)
... kernel: pnp 00:03: [irq 2]
... kernel: pnp 00:03: [io  0x0020-0x0021]
... kernel: pnp 00:03: [io  0x00a0-0x00a1]
... kernel: pnp 00:03: Plug and Play BIOS device, IDs PNP0000 (active)
... kernel: pnp 00:04: [io  0x0000-0x001f]
... kernel: pnp 00:04: [io  0x0080-0x008f]
... kernel: pnp 00:04: [io  0x00c0-0x00df]
... kernel: pnp 00:04: [dma 4]
... kernel: pnp 00:04: Plug and Play BIOS device, IDs PNP0200 (active)
... kernel: pnp 00:05: [irq 0]
... kernel: pnp 00:05: [io  0x0040-0x005f]
... kernel: pnp 00:05: Plug and Play BIOS device, IDs PNP0100 (active)
... kernel: pnp 00:06: [irq 8]
... kernel: pnp 00:06: [io  0x0070-0x007f]
... kernel: pnp 00:06: Plug and Play BIOS device, IDs PNP0b00 (active)
... kernel: pnp 00:07: [irq 1]
... kernel: pnp 00:07: [io  0x0060]
... kernel: pnp 00:07: [io  0x0064]
... kernel: pnp 00:07: Plug and Play BIOS device, IDs PNP0303 (active)
... kernel: pnp 00:08: [io  0x0061]
... kernel: pnp 00:08: Plug and Play BIOS device, IDs PNP0800 (active)
... kernel: pnp 00:09: Plug and Play BIOS device, IDs PNP0a03 (disabled)
... kernel: pnp 00:0a: [irq 12]
... kernel: pnp 00:0a: Plug and Play BIOS device, IDs PNP0f13 (active)
... kernel: pnp 00:0b: [irq 6]
... kernel: pnp 00:0b: [io  0x03f0-0x03f5]
... kernel: pnp 00:0b: [io  0x03f7]
... kernel: pnp 00:0b: [dma 2]
... kernel: pnp 00:0b: Plug and Play BIOS device, IDs PNP0700 (active)
... kernel: pnp 00:0c: [irq 7]
... kernel: pnp 00:0c: [io  0x0378-0x037b]
... kernel: pnp 00:0c: [io  0x0778-0x077b]
... kernel: pnp 00:0c: [dma 3]
... kernel: pnp 00:0c: Plug and Play BIOS device, IDs PNP0401 (active)
... kernel: pnp 00:0f: [irq 4]
... kernel: pnp 00:0f: [io  0x03f8-0x03ff]
... kernel: pnp 00:0f: Plug and Play BIOS device, IDs PNP0501 (active)
... kernel: pnp 00:10: [irq 3]
... kernel: pnp 00:10: [io  0x02f8-0x02ff]
... kernel: pnp 00:10: [dma 0]
... kernel: pnp 00:10: Plug and Play BIOS device, IDs NSC6001 PNP0510 (active)
... kernel: pnp 00:13: [io  0x0000-0xffffffffffffffff disabled]
... kernel: pnp 00:13: Plug and Play BIOS device, IDs PNP0e03 PNP0e00 (disabled)
... kernel: PnPBIOS: 16 nodes reported by PnP BIOS; 16 recorded by driver
... kernel: pci 0000:01:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
... kernel: pci 0000:00:08.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
... kernel: pci 0000:00:08.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
... kernel: pci 0000:00:08.1: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
... kernel: pci 0000:00:08.1: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
... kernel: pci 0000:00:08.0: res[13]=[io  0x0100-0x00ff] get_res_add_size add_size 100
... kernel: pci 0000:00:08.0: res[14]=[io  0x0100-0x00ff] get_res_add_size add_size 100
... kernel: pci 0000:00:08.1: res[13]=[io  0x0100-0x00ff] get_res_add_size add_size 100
... kernel: pci 0000:00:08.1: res[14]=[io  0x0100-0x00ff] get_res_add_size add_size 100
... kernel: pci 0000:00:08.0: BAR 15: assigned [mem 0x18000000-0x1bffffff pref]
... kernel: pci 0000:00:08.0: BAR 16: assigned [mem 0x1c000000-0x1fffffff]
... kernel: pci 0000:00:08.1: BAR 15: assigned [mem 0x34000000-0x37ffffff pref]
... kernel: pci 0000:00:08.1: BAR 16: assigned [mem 0x38000000-0x3bffffff]
... kernel: pci 0000:00:08.0: BAR 13: assigned [io  0x1800-0x18ff]
... kernel: pci 0000:00:08.0: BAR 14: assigned [io  0x1c00-0x1cff]
... kernel: pci 0000:00:08.1: BAR 13: assigned [io  0x2000-0x20ff]
... kernel: pci 0000:00:08.1: BAR 14: assigned [io  0x2400-0x24ff]
... kernel: pci 0000:01:00.0: BAR 6: assigned [mem 0xe0000000-0xe001ffff pref]
... kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
... kernel: pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
... kernel: pci 0000:00:01.0:   bridge window [mem 0xe4000000-0xe7ffffff]
... kernel: pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe3ffffff pref]
... kernel: pci 0000:00:08.0: CardBus bridge to [bus 02-05]
... kernel: pci 0000:00:08.0:   bridge window [io  0x1800-0x18ff]
... kernel: pci 0000:00:08.0:   bridge window [io  0x1c00-0x1cff]
... kernel: pci 0000:00:08.0:   bridge window [mem 0x18000000-0x1bffffff pref]
... kernel: pci 0000:00:08.0:   bridge window [mem 0x1c000000-0x1fffffff]
... kernel: pci 0000:00:08.1: CardBus bridge to [bus 06-09]
... kernel: pci 0000:00:08.1:   bridge window [io  0x2000-0x20ff]
... kernel: pci 0000:00:08.1:   bridge window [io  0x2400-0x24ff]
... kernel: pci 0000:00:08.1:   bridge window [mem 0x34000000-0x37ffffff pref]
... kernel: pci 0000:00:08.1:   bridge window [mem 0x38000000-0x3bffffff]
... kernel: pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
... kernel: pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
... kernel: pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
... kernel: pci_bus 0000:01: resource 1 [mem 0xe4000000-0xe7ffffff]
... kernel: pci_bus 0000:01: resource 2 [mem 0xe0000000-0xe3ffffff pref]
... kernel: pci_bus 0000:02: resource 0 [io  0x1800-0x18ff]
... kernel: pci_bus 0000:02: resource 1 [io  0x1c00-0x1cff]
... kernel: pci_bus 0000:02: resource 2 [mem 0x18000000-0x1bffffff pref]
... kernel: pci_bus 0000:02: resource 3 [mem 0x1c000000-0x1fffffff]
... kernel: pci_bus 0000:06: resource 0 [io  0x2000-0x20ff]
... kernel: pci_bus 0000:06: resource 1 [io  0x2400-0x24ff]
... kernel: pci_bus 0000:06: resource 2 [mem 0x34000000-0x37ffffff pref]
... kernel: pci_bus 0000:06: resource 3 [mem 0x38000000-0x3bffffff]
... kernel: NET: Registered protocol family 2
... kernel: TCP established hash table entries: 4096 (order: 2, 16384 bytes)
... kernel: TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
... kernel: TCP: Hash tables configured (established 4096 bind 4096)
... kernel: TCP: reno registered
... kernel: UDP hash table entries: 256 (order: 1, 8192 bytes)
... kernel: UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
... kernel: NET: Registered protocol family 1
... kernel: pci 0000:00:00.0: Limiting direct PCI/PCI transfers
... kernel: PCI: setting IRQ 9 as level-triggered
... kernel: pci 0000:00:07.2: assigned PCI INT D -> IRQ 9
... kernel: pci 0000:01:00.0: Video device with shadowed ROM
... kernel: PCI: CLS mismatch (256 != 16), using 32 bytes
... kernel: Unpacking initramfs...
... kernel: Freeing initrd memory: 14012K (d0aff000 - d18ae000)
... kernel: Simple Boot Flag at 0x37 set to 0x1
... kernel: microcode: CPU0 sig=0x665, pf=0x10, revision=0x3
... kernel: microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
... kernel: futex hash table entries: 256 (order: 2, 16384 bytes)
... kernel: audit: initializing netlink subsys (disabled)
... kernel: audit: type=2000 audit(1480871259.980:1): initialized
... kernel: HugeTLB registered 2 MB page size, pre-allocated 0 pages
... kernel: zbud: loaded
... kernel: VFS: Disk quotas dquot_6.5.2
... kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
... kernel: msgmni has been set to 554
... kernel: alg: No test for stdrng (krng)
... kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
... kernel: io scheduler noop registered
... kernel: io scheduler deadline registered
... kernel: io scheduler cfq registered (default)
... kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
... kernel: pciehp: PCI Express Hot Plug Controller Driver version: 0.4
... kernel: intel_idle: does not run on family 6 model 6
... kernel: isapnp: Scanning for PnP cards...
... kernel: isapnp: No Plug & Play device found
... kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
... kernel: 00:0f: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
... kernel: serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 921600) is a NS16550A
... kernel: Linux agpgart interface v0.103
... kernel: agpgart-intel 0000:00:00.0: Intel 440BX Chipset
... kernel: agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x20000000
... kernel: i8042: PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
... kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
... kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
... kernel: mousedev: PS/2 mouse device common for all mice
... kernel: rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
... kernel: rtc_cmos 00:06: alarms up to one day, 242 bytes nvram
... kernel: ledtrig-cpu: registered to indicate activity on CPUs
... kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
... kernel: TCP: cubic registered
... kernel: NET: Registered protocol family 10
... kernel: atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying to access hardware directly.
... kernel: mip6: Mobile IPv6
... kernel: NET: Registered protocol family 17
... kernel: mpls_gso: MPLS GSO support
... kernel: Using IPI No-Shortcut mode
... kernel: registered taskstats version 1
... kernel: rtc_cmos 00:06: setting system clock to 2016-12-04 17:07:40 UTC (1480871260)
... kernel: PM: Hibernation image not present or could not be loaded.
... kernel: Freeing unused kernel memory: 660K (c1675000 - c171a000)
... kernel: Write protecting the kernel text: 4628k
... kernel: Write protecting the kernel read-only data: 1456k
... systemd-udevd[54]: starting version 215
... kernel: random: systemd-udevd urandom read with 14 bits of entropy available
... kernel: SCSI subsystem initialized
... kernel: usbcore: registered new interface driver usbfs
... kernel: usbcore: registered new interface driver hub
... kernel: usbcore: registered new device driver usb
... kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
... kernel: uhci_hcd: USB Universal Host Controller Interface driver
... kernel: uhci_hcd 0000:00:07.2: found PCI INT D -> IRQ 9
... kernel: uhci_hcd 0000:00:07.2: UHCI Host Controller
... kernel: uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
... kernel: uhci_hcd 0000:00:07.2: detected 2 ports
... kernel: uhci_hcd 0000:00:07.2: irq 9, io base 0x00001040
... kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
... kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
... kernel: usb usb1: Product: UHCI Host Controller
... kernel: usb usb1: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
... kernel: usb usb1: SerialNumber: 0000:00:07.2
... kernel: libata version 3.00 loaded.
... kernel: hub 1-0:1.0: USB hub found
... kernel: hub 1-0:1.0: 2 ports detected
... kernel: ata_piix 0000:00:07.1: version 2.13
... kernel: scsi0 : ata_piix
... kernel: scsi1 : ata_piix
... kernel: ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1100 irq 14
... kernel: ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1108 irq 15
... kernel: Switched to clocksource tsc
... kernel: ata2.00: ATAPI: DV-22E, 1.0A, max MWDMA2
... kernel: ata1.00: ATA-4: FUJITSU MHH2064AT, B815, max UDMA/33
... kernel: ata1.00: 12685680 sectors, multi 0: LBA 
... kernel: ata2.00: configured for MWDMA2
... kernel: ata1.00: configured for UDMA/33
... kernel: scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHH2064A B815 PQ: 0 ANSI: 5
... kernel: scsi 1:0:0:0: CD-ROM            TEAC     DV-22E           1.0A PQ: 0 ANSI: 5
... kernel: usb 1-1: new full-speed USB device number 2 using uhci_hcd
... kernel: sd 0:0:0:0: [sda] 12685680 512-byte logical blocks: (6.49 GB/6.04 GiB)
... kernel: sr0: scsi3-mmc drive: 20x/20x xa/form2 cdda tray
... kernel: cdrom: Uniform CD-ROM driver Revision: 3.20
... kernel: sr 1:0:0:0: Attached scsi CD-ROM sr0
... kernel: sd 0:0:0:0: [sda] Write Protect is off
... kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
... kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
... kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
... kernel: sr 1:0:0:0: Attached scsi generic sg1 type 5
... kernel: usb 1-1: New USB device found, idVendor=079b, idProduct=0062
... kernel: usb 1-1: New USB device strings: Mfr=16, Product=32, SerialNumber=0
... kernel: usb 1-1: Product: 802.11b/g USB WLAN
... kernel: usb 1-1: Manufacturer: ZyDAS
... kernel:  sda: sda1 sda2
... kernel: sd 0:0:0:0: [sda] Attached SCSI disk
... kernel: psmouse serio1: synaptics: Touchpad model: 1, fw: 4.1, id: 0x848a1, caps: 0x0/0x0/0x0, board id: 0, fw id: 5588821
... kernel: input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
... kernel: random: nonblocking pool is initialized
... kernel: EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
... systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
... systemd[1]: Detected architecture 'x86'.
... systemd[1]: Inserted module 'autofs4'
... systemd[1]: Set hostname to <aristo>.
... systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
... systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
... systemd[1]: Started Forward Password Requests to Wall Directory Watch.
... systemd[1]: Starting Remote File Systems (Pre).
... systemd[1]: Reached target Remote File Systems (Pre).
... systemd[1]: Starting Encrypted Volumes.
... systemd[1]: Reached target Encrypted Volumes.
... systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
... systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
... systemd[1]: Starting Paths.
... systemd[1]: Reached target Paths.
... systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
... systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
... systemd[1]: Starting Swap.
... systemd[1]: Reached target Swap.
... systemd[1]: Starting Root Slice.
... systemd[1]: Created slice Root Slice.
... systemd[1]: Starting User and Session Slice.
... systemd[1]: Created slice User and Session Slice.
... systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
... systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
... systemd[1]: Starting Delayed Shutdown Socket.
... systemd[1]: Listening on Delayed Shutdown Socket.
... systemd[1]: Starting Journal Socket (/dev/log).
... systemd[1]: Listening on Journal Socket (/dev/log).
... systemd[1]: Starting udev Control Socket.
... systemd[1]: Listening on udev Control Socket.
... systemd[1]: Starting udev Kernel Socket.
... systemd[1]: Listening on udev Kernel Socket.
... systemd[1]: Starting Journal Socket.
... systemd[1]: Listening on Journal Socket.
... systemd[1]: Starting System Slice.
... systemd[1]: Created slice System Slice.
... systemd[1]: Started File System Check on Root Device.
... systemd[1]: Starting system-getty.slice.
... systemd[1]: Created slice system-getty.slice.
... systemd[1]: Starting Increase datagram queue length...
... systemd[1]: Starting Nameserver information manager...
... systemd[1]: Mounting Debug File System...
... systemd[1]: Started Set Up Additional Binary Formats.
... systemd[1]: Starting Load Kernel Modules...
... systemd[1]: Mounting Huge Pages File System...
... systemd[1]: Starting Create list of required static device nodes for the current kernel...
... systemd[1]: Mounting POSIX Message Queue File System...
... systemd[1]: Starting udev Coldplug all Devices...
... systemd[1]: Starting LSB: controls configuration of serial ports...
... systemd[1]: Starting Slices.
... systemd[1]: Reached target Slices.
... systemd[1]: Started Create list of required static device nodes for the current kernel.
... systemd[1]: Starting Create Static Device Nodes in /dev...
... systemd[1]: Started Load Kernel Modules.
... systemd[1]: Mounted FUSE Control File System.
... systemd[1]: Mounted Configuration File System.
... systemd[1]: Starting Apply Kernel Variables...
... systemd[1]: Mounted POSIX Message Queue File System.
... systemd[1]: Mounted Huge Pages File System.
... systemd[1]: Mounted Debug File System.
... systemd[1]: Started Increase datagram queue length.
... systemd[1]: Started Apply Kernel Variables.
... systemd[1]: Started udev Coldplug all Devices.
... systemd[1]: Starting Syslog Socket.
... systemd[1]: Listening on Syslog Socket.
... systemd[1]: Starting Journal Service...
... systemd[1]: Started Journal Service.
... systemd-udevd[152]: starting version 215
... systemd-journal[143]: Journal started
... systemd[1]: Started LSB: controls configuration of serial ports.
... systemd[1]: Started Nameserver information manager.
... systemd[1]: Started Create Static Device Nodes in /dev.
... systemd[1]: Starting udev Kernel Device Manager...
... systemd[1]: Started udev Kernel Device Manager.
... systemd[1]: Starting Copy rules generated while the root was ro...
... systemd[1]: Starting LSB: Set preliminary keymap...
... systemd[1]: Started Copy rules generated while the root was ro.
gru 04 18:07:56 aristo kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
... kernel: ACPI Exception: AE_BAD_PARAMETER, Thread 3454820368 could not acquire Mutex [0x1] (20140424/utmutex-285)
... kernel: piix4_smbus 0000:00:07.3: SMBus Host Controller at 0x1400, revision 0
... kernel: input: PC Speaker as /devices/platform/pcspkr/input/input3
... kernel: yenta_cardbus 0000:00:08.0: found PCI INT A -> IRQ 10
... kernel: yenta_cardbus 0000:00:08.0: sharing IRQ 10 with 0000:00:08.1
... kernel: yenta_cardbus 0000:00:08.0: sharing IRQ 10 with 0000:01:00.0
... kernel: yenta_cardbus 0000:00:08.0: CardBus bridge found [1071:ac1c]
... kernel: yenta_cardbus 0000:00:08.0: Using CSCINT to route CSC interrupts to PCI
... kernel: yenta_cardbus 0000:00:08.0: Routing CardBus interrupts to PCI
... kernel: yenta_cardbus 0000:00:08.0: TI: mfunc 0x017c1602, devctl 0x64
... kernel: yenta_cardbus 0000:00:08.0: ISA IRQ mask 0x08d8, PCI irq 10
... kernel: yenta_cardbus 0000:00:08.0: Socket status: 30000006
... kernel: yenta_cardbus 0000:00:08.1: found PCI INT A -> IRQ 10
... kernel: yenta_cardbus 0000:00:08.1: sharing IRQ 10 with 0000:00:08.0
... kernel: yenta_cardbus 0000:00:08.1: sharing IRQ 10 with 0000:01:00.0
... kernel: yenta_cardbus 0000:00:08.1: CardBus bridge found [1071:ac1c]
... kernel: yenta_cardbus 0000:00:08.1: Using CSCINT to route CSC interrupts to PCI
... kernel: yenta_cardbus 0000:00:08.1: Routing CardBus interrupts to PCI
... kernel: yenta_cardbus 0000:00:08.1: TI: mfunc 0x017c1602, devctl 0x64
... kernel: yenta_cardbus 0000:00:08.1: ISA IRQ mask 0x08d8, PCI irq 10
... kernel: yenta_cardbus 0000:00:08.1: Socket status: 30000006
... kernel: pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af:
... kernel:  excluding 0x170-0x177 0x1f0-0x1f7 0x230-0x237 0x2f8-0x2ff 0x370-0x37f 0x398-0x39f
... kernel: pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff:
... kernel: pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
... kernel:  excluding 0x170-0x177 0x1f0-0x1f7 0x230-0x237 0x2f8-0x2ff 0x370-0x37f 0x398-0x39f
... kernel: pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
... kernel:  excluding 0x3f0-0x3ff
... kernel:  excluding
... kernel:  0x3f0-0x3ff 0x4d0-0x4d7
... kernel: pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff:
... kernel:  clean.
... kernel: pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7:
... kernel:  clean.
... kernel: pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c0000-0x0fffff:
... kernel:  excluding 0xc0000-0xcffff 0xf0000-0xfffff
... kernel: pcmcia_socket pcmcia_socket1: cs: memory probe 0xa0000000-0xa0ffffff:
... kernel:  clean.
... kernel: pcmcia_socket pcmcia_socket1: cs: memory probe 0x60000000-0x60ffffff:
... kernel:  0x4d0-0x4d7
... kernel: pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
... kernel:  clean.
... kernel: pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
... kernel:  clean.
... kernel: pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
... kernel:  excluding 0xc0000-0xcffff 0xf0000-0xfffff
... kernel: pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
... kernel:  clean.
... kernel: pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
... kernel:  clean.
... kernel: pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
... kernel:  clean.
... kernel:  clean.
... kernel: pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff:
... kernel:  clean.
... systemd[1]: Started LSB: Set preliminary keymap.
... systemd[1]: Starting Remount Root and Kernel File Systems...
... keyboard-setup[155]: Setting preliminary keymap...done.
... kernel: EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
... systemd[1]: Started Remount Root and Kernel File Systems.
... kernel: cfg80211: Calling CRDA to update world regulatory domain
... systemd[1]: Started Various fixups to make systemd work better on Debian.
... systemd[1]: Starting Load/Save Random Seed...
... kernel: PCI: setting IRQ 5 as level-triggered
... kernel: snd_cs46xx 0000:00:09.0: found PCI INT A -> IRQ 5
... systemd[1]: Starting Local File Systems (Pre).
... systemd[1]: Reached target Local File Systems (Pre).
... systemd[1]: Starting Local File Systems.
... systemd[1]: Reached target Local File Systems.
... systemd[1]: Starting Create Volatile Files and Directories...
... systemd[1]: Starting Remote File Systems.
... systemd[1]: Reached target Remote File Systems.
... systemd[1]: Starting Trigger Flushing of Journal to Persistent Storage...
... systemd[1]: Starting LSB: Prepare console...
... systemd[1]: Starting LSB: controls configuration of serial ports...
... kernel: snd_cs46xx 0000:00:09.0: cs46xx_setup_eapd_slot() - no secondary codec configured
... kernel: snd_cs46xx 0000:00:09.0: firmware: failed to load cs46xx/cwc4630 (-2)
... kernel: snd_cs46xx 0000:00:09.0: Direct firmware load failed with error -2
... kernel: snd_cs46xx 0000:00:09.0: Falling back to user helper
... kernel: snd_cs46xx: probe of 0000:00:09.0 failed with error -12
... setserial[230]: Loading the saved-state of the serial devices...
... kernel: usb 1-1: reset full-speed USB device number 2 using uhci_hcd
... kernel: ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
... kernel: zd1211rw 1-1:1.0: phy0
... kernel: usbcore: registered new interface driver zd1211rw
... systemd-journal[143]: Runtime journal is using 4.0M (max allowed 8.0M, trying to leave 8.3M free of 51.3M available → current limit 8.0M).
... systemd[1]: Started Create Volatile Files and Directories.
... systemd[1]: Starting Update UTMP about System Boot/Shutdown...
... systemd[1]: Started Load/Save Random Seed.
... systemd[1]: Starting LSB: Raise network interfaces....
... setserial[230]: /dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A
... systemd[1]: Started Trigger Flushing of Journal to Persistent Storage.
... setserial[230]: Illegal UART type: undefined
... setserial[230]: /dev/ttyS1 at 0x02f8 (irq = 3) is a undefined
... systemd[1]: Started LSB: controls configuration of serial ports.
... kbd[229]: Setting console screen modes.
... systemd[1]: Starting system-systemd\x2drfkill.slice.
... systemd[1]: Created slice system-systemd\x2drfkill.slice.
... systemd[1]: Starting Load/Save RF Kill Switch Status of rfkill0...
... systemd[1]: Started Update UTMP about System Boot/Shutdown.
... systemd[1]: Started Load/Save RF Kill Switch Status of rfkill0.
... kernel: cfg80211: World regulatory domain updated:
... kernel: cfg80211:  DFS Master region: unset
... kernel: cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
... kernel: cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
... kernel: cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
... kernel: cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
... kernel: cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
... kernel: cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
... kernel: cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
... kernel: cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
... kernel: cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
gru 04 18:08:01 aristo systemd[1]: Started LSB: Prepare console.
gru 04 18:08:01 aristo kbd[229]: setterm: Nie zdefiniowano $TERM.
gru 04 18:08:01 aristo systemd[1]: Starting LSB: Set console font and keymap...
... systemd[1]: Started LSB: Set console font and keymap.
... console-setup[294]: Setting up console font and keymap...done.
... wpa_supplicant[383]: Successfully initialized wpa_supplicant
... kernel: usb 1-1: firmware: direct-loading firmware zd1211/zd1211b_ub
... kernel: usb 1-1: firmware: direct-loading firmware zd1211/zd1211b_uphr
... kernel: zd1211rw 1-1:1.0: firmware version 4725
... kernel: zd1211rw 1-1:1.0: zd1211b chip 079b:0062 v4810 full 00-60-b3 AL2230_RF pa0 g---S
... kernel: IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
... kernel: cfg80211: Calling CRDA for country: DE
gru 04 18:08:03 aristo kernel: cfg80211: Regulatory domain changed to country: DE
gru 04 18:08:03 aristo kernel: cfg80211:  DFS Master region: ETSI
gru 04 18:08:03 aristo kernel: cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
gru 04 18:08:03 aristo kernel: cfg80211:   (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
gru 04 18:08:03 aristo kernel: cfg80211:   (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A)
gru 04 18:08:03 aristo kernel: cfg80211:   (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s)
gru 04 18:08:03 aristo kernel: cfg80211:   (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s)
gru 04 18:08:03 aristo kernel: cfg80211:   (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
gru 04 18:08:03 aristo wpa_supplicant[387]: wlan0: CTRL-EVENT-REGDOM-CHANGE init=DRIVER type=COUNTRY alpha2=DE
... dhclient[397]: Internet Systems Consortium DHCP Client 4.3.1
... dhclient[397]: Copyright 2004-2014 Internet Systems Consortium.
... dhclient[397]: All rights reserved.
... dhclient[397]: For info, please visit https://www.isc.org/software/dhcp/
... dhclient[397]: 
... networking[254]: Configuring network interfaces...Internet Systems Consortium DHCP Client 4.3.1
... networking[254]: Copyright 2004-2014 Internet Systems Consortium.
... networking[254]: All rights reserved.
... networking[254]: For info, please visit https://www.isc.org/software/dhcp/
... wpa_supplicant[387]: wlan0: SME: Trying to authenticate with 00:12:2a:e2:57:28 (SSID='NETIASPOT-E25720' freq=2467 MHz)
... kernel: wlan0: authenticate with 00:12:2a:e2:57:28
... kernel: wlan0: send auth to 00:12:2a:e2:57:28 (try 1/3)
... kernel: wlan0: authenticated
... wpa_supplicant[387]: wlan0: Trying to associate with 00:12:2a:e2:57:28 (SSID='NETIASPOT-E25720' freq=2467 MHz)
... kernel: wlan0: associate with 00:12:2a:e2:57:28 (try 1/3)
... kernel: wlan0: RX AssocResp from 00:12:2a:e2:57:28 (capab=0x431 status=0 aid=19)
... kernel: wlan0: associated
... kernel: IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
... kernel: cfg80211: Calling CRDA for country: PL
... wpa_supplicant[387]: wlan0: Associated with 00:12:2a:e2:57:28
... wpa_supplicant[387]: wlan0: WPA: Key negotiation completed with 00:12:2a:e2:57:28 [PTK=CCMP GTK=TKIP]
... wpa_supplicant[387]: wlan0: CTRL-EVENT-CONNECTED - Connection to 00:12:2a:e2:57:28 completed [id=0 id_str=]
... wpa_supplicant[387]: wlan0: CTRL-EVENT-REGDOM-CHANGE init=COUNTRY_IE type=COUNTRY alpha2=PL
... kernel: cfg80211: Regulatory domain changed to country: PL
... kernel: cfg80211:  DFS Master region: ETSI
... kernel: cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
... kernel: cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
... kernel: cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
... kernel: cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
... kernel: cfg80211:   (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
... kernel: cfg80211:   (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
... dhclient[397]: Listening on LPF/wlan0/00:60:b3:4a:51:d2
... dhclient[397]: Sending on   LPF/wlan0/00:60:b3:4a:51:d2
... dhclient[397]: Sending on   Socket/fallback
... dhclient[397]: DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 4
... networking[254]: Listening on LPF/wlan0/00:60:b3:4a:51:d2
... networking[254]: Sending on   LPF/wlan0/00:60:b3:4a:51:d2
... networking[254]: Sending on   Socket/fallback
... networking[254]: DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 4
... dhclient[397]: DHCPREQUEST on wlan0 to 255.255.255.255 port 67
... dhclient[397]: DHCPOFFER from 192.168.1.254
... networking[254]: DHCPREQUEST on wlan0 to 255.255.255.255 port 67
... networking[254]: DHCPOFFER from 192.168.1.254
... dhclient[397]: DHCPACK from 192.168.1.254
... networking[254]: DHCPACK from 192.168.1.254
... dhclient[397]: bound to 192.168.1.121 -- renewal in 38422 seconds.
... networking[254]: bound to 192.168.1.121 -- renewal in 38422 seconds.
... systemd[1]: Started LSB: Raise network interfaces..
... networking[254]: done.
... systemd[1]: Starting Network.
... systemd[1]: Reached target Network.
... systemd[1]: Starting Network is Online.
... systemd[1]: Reached target Network is Online.
... systemd[1]: Starting LSB: RPC portmapper replacement...
... rpcbind[494]: Starting rpcbind daemon....
... systemd[1]: Started LSB: RPC portmapper replacement.
... systemd[1]: Starting RPC Port Mapper.
... systemd[1]: Reached target RPC Port Mapper.
... systemd[1]: Starting LSB: NFS support files common to client and server...
... rpc.statd[511]: Version 1.2.8 starting
... sm-notify[512]: Version 1.2.8 starting
... kernel: RPC: Registered named UNIX socket transport module.
... kernel: RPC: Registered udp transport module.
... kernel: RPC: Registered tcp transport module.
... kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
... kernel: FS-Cache: Loaded
... kernel: FS-Cache: Netfs 'nfs' registered for caching
... kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
... nfs-common[506]: Starting NFS common utilities: statd idmapd.
... systemd[1]: Started LSB: NFS support files common to client and server.
... systemd[1]: Starting System Initialization.
... systemd[1]: Reached target System Initialization.
... systemd[1]: Starting D-Bus System Message Bus Socket.
... systemd[1]: Listening on D-Bus System Message Bus Socket.
... systemd[1]: Starting Sockets.
... systemd[1]: Reached target Sockets.
... systemd[1]: Starting Daily Cleanup of Temporary Directories.
... systemd[1]: Started Daily Cleanup of Temporary Directories.
... systemd[1]: Starting Timers.
... systemd[1]: Reached target Timers.
... systemd[1]: Starting Basic System.
... systemd[1]: Reached target Basic System.
... systemd[1]: Starting Deferred execution scheduler...
... systemd[1]: Started Deferred execution scheduler.
... systemd[1]: Starting Regular background program processing daemon...
... systemd[1]: Started Regular background program processing daemon.
... systemd[1]: Starting Initialize hardware monitoring sensors...
... systemd[1]: Starting Run anacron jobs...
... cron[528]: (CRON) INFO (pidfile fd = 3)
... systemd[1]: Started Run anacron jobs.
... systemd[1]: Starting OpenBSD Secure Shell server...
... systemd[1]: Started OpenBSD Secure Shell server.
... systemd[1]: Starting /etc/rc.local Compatibility...
... systemd[1]: Started getty on tty2-tty6 if dbus and logind are not available.
... systemd[1]: Starting Login Service...
... systemd[1]: Starting LSB: exim Mail Transport Agent...
... systemd[1]: Starting LSB: Infrared port support...
... cron[528]: (CRON) INFO (Running @reboot jobs)
... anacron[530]: Anacron 2.3 started on 2016-12-04
... systemd[1]: Starting LSB: disk temperature monitoring daemon...
... systemd[1]: Starting D-Bus System Message Bus...
... systemd[1]: Started D-Bus System Message Bus.
... anacron[530]: Normal exit (0 jobs run)
... sensors[529]: No sensors found!
... sensors[529]: Make sure you loaded all the kernel drivers you need.
... sensors[529]: Try sensors-detect to find out which these are.
... irda-utils[535]: Skipping IrDA service: irattach (not enabled)...done.
gru 04 18:08:12 aristo sshd[531]: Server listening on 0.0.0.0 port 22.
gru 04 18:08:12 aristo sshd[531]: Server listening on :: port 22.
... dbus[537]: [system] Successfully activated service 'org.freedesktop.systemd1'
... systemd[1]: Starting System Logging Service...
... systemd[1]: Starting Permit User Sessions...
... systemd[1]: Started /etc/rc.local Compatibility.
... sensors[562]: No sensors found!
... sensors[562]: Make sure you loaded all the kernel drivers you need.
... sensors[562]: Try sensors-detect to find out which these are.
... systemd[1]: Started LSB: Infrared port support.
... systemd[1]: Started LSB: disk temperature monitoring daemon.
... systemd[1]: Started Initialize hardware monitoring sensors.
... systemd[1]: Started Permit User Sessions.
... systemd[1]: Started System Logging Service.
... systemd-logind[533]: New seat seat0.
... systemd[1]: Started Login Service.
... systemd[1]: Starting Getty on tty1...
... systemd[1]: Started Getty on tty1.
... systemd[1]: Starting Login Prompts.
... systemd[1]: Reached target Login Prompts.
... exim4[534]: Starting MTA: exim4.
... systemd[1]: Started LSB: exim Mail Transport Agent.
... systemd[1]: Starting Multi-User System.
... systemd[1]: Reached target Multi-User System.
... systemd[1]: Starting Graphical Interface.
... systemd[1]: Reached target Graphical Interface.
... systemd[1]: Starting Update UTMP about System Runlevel Changes...
... systemd[1]: Started Update UTMP about System Runlevel Changes.
... systemd[1]: Startup finished in 8.021s (kernel) + 31.690s (userspace) = 39.711s.
gru 04 18:08:41 aristo login[594]: pam_unix(login:session): session opened for user krzysztof by LOGIN(uid=0)
gru 04 18:08:41 aristo systemd-logind[533]: New session 1 of user krzysztof.
gru 04 18:08:41 aristo systemd[1]: Starting user-1000.slice.
gru 04 18:08:41 aristo systemd[1]: Created slice user-1000.slice.
gru 04 18:08:41 aristo systemd[1]: Starting Session 1 of user krzysztof.
gru 04 18:08:41 aristo systemd[1]: Started Session 1 of user krzysztof.
gru 04 18:08:41 aristo systemd[1]: Starting User Manager for UID 1000...
gru 04 18:08:41 aristo systemd[815]: pam_unix(systemd-user:session): session opened for user krzysztof by (uid=0)
... systemd[815]: Starting Paths.
... systemd[815]: Reached target Paths.
... systemd[815]: Starting Timers.
... systemd[815]: Reached target Timers.
... systemd[815]: Starting Sockets.
... systemd[815]: Reached target Sockets.
... systemd[815]: Starting Basic System.
... systemd[815]: Reached target Basic System.
... systemd[815]: Starting Default.
... systemd[815]: Reached target Default.
... systemd[815]: Startup finished in 303ms.
... systemd[1]: Started User Manager for UID 1000.
gru 04 18:08:54 aristo su[827]: Successful su for root by krzysztof
gru 04 18:08:54 aristo su[827]: + /dev/tty1 krzysztof:root
gru 04 18:08:54 aristo su[827]: pam_unix(su:session): session opened for user root by krzysztof(uid=1000)
gru 04 18:11:16 aristo wpa_supplicant[387]: wlan0: WPA: Group rekeying completed with 00:12:2a:e2:57:28 [GTK=TKIP]
gru 04 18:17:03 aristo CRON[834]: pam_unix(cron:session): session opened for user root by (uid=0)
gru 04 18:17:03 aristo CRON[835]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
gru 04 18:17:03 aristo CRON[834]: pam_unix(cron:session): session closed for user root
gru 04 18:21:16 aristo wpa_supplicant[387]: wlan0: WPA: Group rekeying completed with 00:12:2a:e2:57:28 [GTK=TKIP]
gru 04 18:22:37 aristo systemd[1]: Starting Cleanup of Temporary Directories...
gru 04 18:22:37 aristo systemd[1]: Started Cleanup of Temporary Directories.
gru 04 18:31:16 aristo wpa_supplicant[387]: wlan0: WPA: Group rekeying completed with 00:12:2a:e2:57:28 [GTK=TKIP]
gru 04 18:41:16 aristo wpa_supplicant[387]: wlan0: WPA: Group rekeying completed with 00:12:2a:e2:57:28 [GTK=TKIP]
gru 04 18:51:16 aristo wpa_supplicant[387]: wlan0: WPA: Group rekeying completed with 00:12:2a:e2:57:28 [GTK=TKIP]
gru 04 19:01:17 aristo wpa_supplicant[387]: wlan0: WPA: Group rekeying completed with 00:12:2a:e2:57:28 [GTK=TKIP]

Prosiłbym o przejrzenie logów, czy są jeszcze jakieś błędy do naprawienia. Chciałbym na tym laptopie przećwiczyć kompilowanie kernela. Zastanawiam się, czy nie zrobić jeszcze downgrade do oldstable, wystarczy tylko zmienić repozytoria i zrobić dist-upgrade czy jeszcze coś

Dodam jeszcze, że dystrybucje live, np. Wary Linux normalnie potrafiły wyłączyć komputer.
ODPOWIEDZ