[+] Nie działa karta dźwiękowa i sieciowa po zmianie płyty

[tokirium]

Mam komputer stacjonarny z procesorem Pentium IV 1.5 GHz. Zdobyłem płytę główną Asrock K7VT2 z procesorem AMD Sempron 2200+ , może na tym zestawie komputer będzie chodził szybciej. Podłączyłem dysk z Debianem i system bez problamu uruchomił się (windows nie pozbierał się nawet po migracji z PentiumIII do P4, a co dopiero do innej architektury), ale widzę że chyba nie działają karty sieciowa i dźwiękowa (zintegrowane) (edit: dźwiękowa już działa). Polecenie lspci podaje:

Kod: Zaznacz cały

00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102/VT6103 [Rhine-II] (rev 74)
 01:00.0 VGA compatible controller: NVIDIA Corporation NV5 [Riva TNT2 Model 64 / Model 64 Pro] (rev 15)

Jak ustawić system, aby w pełni korzystał z nowej płyty? Czy może lepiej zainstalować od zera system?

***MODEDIT: Uzupełnij dane na temat wersji systemu i pokaż swoje repozytoria***

Edit:
Już uzupełniam, jest to Debian testing świeżo po dist-upgrade. Zebrałem ile się dało, co jeszcze mógłbym podać? Okazało się, że karta dźwiękowa działa, dźwięk był wyciszony tylko, wiec pozostaje tylko karta sieciowa
Dodam jeszcze, że płyta główna jak i zintegrowana karta sieciowa wydaje się być sprawna, bo inne dystrybucje live (Pupy Linux) bez problemu łączą się z internetem. Wygląda na to, że coś jest nieskonfigurowane do końca. Z tego co się dowiedziałem, to za obsługę karty odpowiada moduł via_rhine i z tego co widzę to jest on załadowany, więc nie wiem co może być nie tak. Ifconfig pokazuje tylko interfejs lo, uruchamianie eth0 przez ifup daje komunikat, że nie ma takiego urządzenia. Czy dobrze mam skonfigurowany plik /etc/network/interfaces?

uname -a:

Kod: Zaznacz cały

Linux Krzys-db 4.6.0-1-686-pae #1 SMP Debian 4.6.4-1 (2016-07-18) i686 GNU/Linux

sources.list:

Kod: Zaznacz cały

# 

# deb cdrom:[Debian GNU/Linux 8.2.0 _Jessie_ - Official i386 NETINST Binary-1 20150906-10:00]/ jessie main

#deb cdrom:[Debian GNU/Linux 8.2.0 _Jessie_ - Official i386 NETINST Binary-1 20150906-10:00]/ jessie main

#! deb http://ftp.pl.debian.org/debian/ jessie main
#! deb-src http://ftp.pl.debian.org/debian/ jessie main

#! deb http://security.debian.org/ jessie/updates main
#! deb-src http://security.debian.org/ jessie/updates main

# jessie-updates, previously known as 'volatile'
#! deb http://ftp.pl.debian.org/debian/ jessie-updates main
#! deb-src http://ftp.pl.debian.org/debian/ jessie-updates main




#~~~~~~Stretch~~~~~~#
deb http://ftp.pl.debian.org/debian/ testing main non-free contrib
#deb-src http://ftp.pl.debian.org/debian/ testing main non-free contrib
deb http://security.debian.org/ testing/updates main contrib non-free
#deb-src http://security.debian.org/ testing/updates main contrib non-free
#~~~~~~Deb-multimedia~~~~~~#
deb http://www.deb-multimedia.org/ testing main non-free
#deb-src http://www.deb-multimedia.org/ testing main non-free

#java
deb http://ppa.launchpad.net/webupd8team/java/ubuntu trusty main
deb-src http://ppa.launchpad.net/webupd8team/java/ubuntu trusty main

ifconfig

Kod: Zaznacz cały

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1  (Local Loopback)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

etc/network/interfaces

Kod: Zaznacz cały

# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

source /etc/network/interfaces.d/*

# The loopback network interface
auto lo eth0
iface lo inet loopback

# The primary network interface
allow-hotplug eth0
iface eth0 inet dhcp

lsmod

Kod: Zaznacz cały

Module                  Size  Used by
nls_utf8               16384  1
nls_cp437              16384  1
vfat                   20480  1
fat                    57344  1 vfat
uas                    20480  0
usb_storage            53248  2 uas
binfmt_misc            20480  1
nouveau              1306624  4
mxm_wmi                16384  1 nouveau
wmi                    20480  2 mxm_wmi,nouveau
video                  32768  1 nouveau
evdev                  20480  12
ttm                    73728  1 nouveau
serio_raw              16384  0
ns558                  16384  0
sg                     32768  0
drm_kms_helper        110592  1 nouveau
pcspkr                 16384  0
drm                   249856  7 ttm,drm_kms_helper,nouveau
snd_wavefront          36864  0
i2c_algo_bit           16384  1 nouveau
snd_cs4236             28672  0
i2c_viapro             16384  0
snd_via82xx            28672  2
snd_opl3_lib           20480  2 snd_wavefront,snd_cs4236
snd_ac97_codec         98304  1 snd_via82xx
snd_hwdep              16384  2 snd_wavefront,snd_opl3_lib
snd_wss_lib            28672  2 snd_wavefront,snd_cs4236
via_ircc               28672  0
snd_pcm                86016  4 snd_via82xx,snd_ac97_codec,snd_wss_lib,snd_cs4236
ac97_bus               16384  1 snd_ac97_codec
snd_timer              28672  3 snd_wss_lib,snd_pcm,snd_opl3_lib
gameport               16384  3 snd_via82xx,ns558
snd_mpu401_uart        16384  3 snd_via82xx,snd_wavefront,snd_cs4236
snd_rawmidi            24576  2 snd_wavefront,snd_mpu401_uart
snd_seq_device         16384  2 snd_rawmidi,snd_opl3_lib
snd                    57344  16 snd_via82xx,snd_ac97_codec,snd_hwdep,snd_timer,snd_wss_lib,snd_pcm,snd_rawmidi,snd_wavefront,snd_mpu401_uart,snd_seq_device,snd_cs4236,snd_opl3_lib
soundcore              16384  1 snd
irda                  143360  1 via_ircc
crc_ccitt              16384  1 irda
8250_fintek            16384  0
shpchp                 32768  0
button                 16384  1 nouveau
acpi_cpufreq           20480  0
tpm_tis                20480  0
tpm                    36864  1 tpm_tis
processor              32768  1 acpi_cpufreq
w83627hf               24576  0
hwmon_vid              16384  1 w83627hf
sunrpc                245760  1
parport_pc             28672  1
ppdev                  20480  0
lp                     20480  0
parport                36864  3 lp,ppdev,parport_pc
autofs4                36864  2
ext4                  507904  2
ecb                    16384  0
xts                    16384  0
lrw                    16384  0
gf128mul               20480  2 lrw,xts
ablk_helper            16384  0
cryptd                 20480  1 ablk_helper
aes_i586               20480  0
crc16                  16384  1 ext4
jbd2                   77824  1 ext4
crc32c_generic         16384  0
mbcache                16384  3 ext4
hid_generic            16384  0
sd_mod                 40960  6
usbhid                 45056  0
hid                    90112  2 hid_generic,usbhid
ata_generic            16384  0
pata_via               16384  3
libata                184320  2 pata_via,ata_generic
scsi_mod              180224  5 sg,uas,usb_storage,libata,sd_mod
via_rhine              28672  0
mii                    16384  1 via_rhine
floppy                 57344  0
ehci_pci               16384  0
uhci_hcd               40960  0
ehci_hcd               65536  1 ehci_pci
usbcore               184320  6 uas,uhci_hcd,usb_storage,ehci_hcd,ehci_pci,usbhid
usb_common             16384  1 usbcore

lspci

Kod: Zaznacz cały

00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333]
00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333 AGP]
00:10.0 USB controller: VIA Technologies, Inc. VT82xx/62xx UHCI USB 1.1 Controller (rev 80)
00:10.1 USB controller: VIA Technologies, Inc. VT82xx/62xx UHCI USB 1.1 Controller (rev 80)
00:10.2 USB controller: VIA Technologies, Inc. VT82xx/62xx UHCI USB 1.1 Controller (rev 80)
00:10.3 USB controller: VIA Technologies, Inc. USB 2.0 (rev 82)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102/VT6103 [Rhine-II] (rev 74)
01:00.0 VGA compatible controller: NVIDIA Corporation NV5 [Riva TNT2 Model 64 / Model 64 Pro] (rev 15)

lshw (nie wiem czy czytelne, bo nie da się wrzucić załącznika w html)

Kod: Zaznacz cały

id:	
krzys-db
description: 	Desktop Computer
product: 	K7VT2
version: 	2.00
serial: 	00000000
width: 	32 bits
capabilities: 	smbios-2.3 dmi-2.3
configuration:	
chassis	=	desktop
id:	
core
description: 	Motherboard
product: 	K7VT2
physical id: 	
0
version: 	2.00
serial: 	00000000
id:	
firmware
description: 	BIOS
vendor: 	American Megatrends Inc.
physical id: 	
0
version: 	P1.20
date: 	12/10/2002
size: 	64KiB
capacity: 	192KiB
capabilities: 	isa pci pnp apm upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int17printer int10video acpi usb agp ls120boot zipboot biosbootspecification
id:	
cpu
description: 	CPU
product: 	AMD Athlon(tm)
vendor: 	Advanced Micro Devices [AMD]
physical id: 	
4
bus info: 	
cpu@0
version: 	6.8.1
slot: 	Socket-A
size: 	1200MHz
capacity: 	3GHz
width: 	32 bits
clock: 	133MHz
capabilities: 	fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mp mmxext 3dnowext 3dnow eagerfpu 3dnowprefetch vmmcall
id:	
cache:0
description: 	L1 cache
physical id: 	
5
slot: 	Internal Cache
size: 	128KiB
capacity: 	1MiB
capabilities: 	synchronous internal write-back unified
configuration:	
level	=	1
id:	
cache:1
description: 	L2 cache
physical id: 	
6
slot: 	Internal Cache
size: 	256KiB
capacity: 	1MiB
capabilities: 	synchronous internal write-back unified
configuration:	
level	=	2
id:	
memory
description: 	System memory
physical id: 	
1
size: 	1017MiB
id:	
pci
description: 	Host bridge
product: 	VT8366/A/7 [Apollo KT266/A/333]
vendor: 	VIA Technologies, Inc.
physical id: 	
100
bus info: 	
pci@0000:00:00.0
version: 	00
width: 	32 bits
clock: 	66MHz
configuration:	
driver	=	agpgart-via
resources:	
irq	:	0
memory	:	e0000000-e3ffffff
id:	
pci
description: 	PCI bridge
product: 	VT8366/A/7 [Apollo KT266/A/333 AGP]
vendor: 	VIA Technologies, Inc.
physical id: 	
1
bus info: 	
pci@0000:00:01.0
version: 	00
width: 	32 bits
clock: 	66MHz
capabilities: 	pci pm normal_decode bus_master cap_list
resources:	
memory	:	dde00000-dfefffff
memory	:	d9d00000-ddcfffff
id:	
display
description: 	VGA compatible controller
product: 	NV5 [Riva TNT2 Model 64 / Model 64 Pro]
vendor: 	NVIDIA Corporation
physical id: 	
0
bus info: 	
pci@0000:01:00.0
version: 	15
width: 	32 bits
clock: 	66MHz
capabilities: 	pm agp agp-2.0 vga_controller bus_master cap_list rom
configuration:	
driver	=	nouveau
latency	=	32
maxlatency	=	1
mingnt	=	5
resources:	
irq	:	16
memory	:	de000000-deffffff
memory	:	da000000-dbffffff
memory	:	c0000-dffff
id:	
usb:0
description: 	USB controller
product: 	VT82xx/62xx UHCI USB 1.1 Controller
vendor: 	VIA Technologies, Inc.
physical id: 	
10
bus info: 	
pci@0000:00:10.0
version: 	80
width: 	32 bits
clock: 	33MHz
capabilities: 	pm uhci bus_master cap_list
configuration:	
driver	=	uhci_hcd
latency	=	32
resources:	
irq	:	21
ioport	:	e400(size=32)
id:	
usbhost
product: 	UHCI Host Controller
vendor: 	Linux 4.6.0-1-686-pae uhci_hcd
physical id: 	
1
bus info: 	
usb@1
logical name: 	
usb1
version: 	4.06
capabilities: 	usb-1.10
configuration:	
driver	=	hub
slots	=	2
speed	=	12Mbit/s
id:	
usb:1
description: 	USB controller
product: 	VT82xx/62xx UHCI USB 1.1 Controller
vendor: 	VIA Technologies, Inc.
physical id: 	
10.1
bus info: 	
pci@0000:00:10.1
version: 	80
width: 	32 bits
clock: 	33MHz
capabilities: 	pm uhci bus_master cap_list
configuration:	
driver	=	uhci_hcd
latency	=	32
resources:	
irq	:	21
ioport	:	e800(size=32)
id:	
usbhost
product: 	UHCI Host Controller
vendor: 	Linux 4.6.0-1-686-pae uhci_hcd
physical id: 	
1
bus info: 	
usb@3
logical name: 	
usb3
version: 	4.06
capabilities: 	usb-1.10
configuration:	
driver	=	hub
slots	=	2
speed	=	12Mbit/s
id:	
usb
description: 	Mouse
product: 	Usb Mouse
vendor: 	SIGMACHIP
physical id: 	
2
bus info: 	
usb@3:2
version: 	1.10
capabilities: 	usb-1.10
configuration:	
driver	=	usbhid
maxpower	=	98mA
speed	=	1Mbit/s
id:	
usb:2
description: 	USB controller
product: 	VT82xx/62xx UHCI USB 1.1 Controller
vendor: 	VIA Technologies, Inc.
physical id: 	
10.2
bus info: 	
pci@0000:00:10.2
version: 	80
width: 	32 bits
clock: 	33MHz
capabilities: 	pm uhci bus_master cap_list
configuration:	
driver	=	uhci_hcd
latency	=	32
resources:	
irq	:	21
ioport	:	ec00(size=32)
id:	
usbhost
product: 	UHCI Host Controller
vendor: 	Linux 4.6.0-1-686-pae uhci_hcd
physical id: 	
1
bus info: 	
usb@4
logical name: 	
usb4
version: 	4.06
capabilities: 	usb-1.10
configuration:	
driver	=	hub
slots	=	2
speed	=	12Mbit/s
id:	
usb:3
description: 	USB controller
product: 	USB 2.0
vendor: 	VIA Technologies, Inc.
physical id: 	
10.3
bus info: 	
pci@0000:00:10.3
version: 	82
width: 	32 bits
clock: 	33MHz
capabilities: 	pm ehci bus_master cap_list
configuration:	
driver	=	ehci-pci
latency	=	32
resources:	
irq	:	21
memory	:	dffdff00-dffdffff
id:	
usbhost
product: 	EHCI Host Controller
vendor: 	Linux 4.6.0-1-686-pae ehci_hcd
physical id: 	
1
bus info: 	
usb@2
logical name: 	
usb2
version: 	4.06
capabilities: 	usb-2.00
configuration:	
driver	=	hub
slots	=	6
speed	=	480Mbit/s
id:	
usb
description: 	Mass storage device
product: 	Intelligent
vendor: 	I-Stick mini
physical id: 	
2
bus info: 	
usb@2:2
logical name: 	
scsi2
version: 	1.00
serial: 	30c6196359b751
capabilities: 	usb-2.00 scsi emulated
configuration:	
driver	=	usb-storage
maxpower	=	80mA
speed	=	480Mbit/s
id:	
disk
description: 	SCSI Disk
product: 	IntelligentStick
vendor: 	pqi
physical id: 	
0.0.0
bus info: 	
scsi@2:0.0.0
logical name: 	
/dev/sdb
version: 	0.00
size: 	963MiB (1010MB)
capabilities: 	removable
configuration:	
ansiversion	=	2
logicalsectorsize	=	512
sectorsize	=	512
id:	
medium
physical id: 	
0
logical name: 	
/dev/sdb
size: 	963MiB (1010MB)
capabilities: 	partitioned partitioned:dos
configuration:	
signature	=	0002e4e5
id:	
volume
description: 	Windows FAT volume
vendor: 	mkdosfs
physical id: 	
1
logical name: 	
/dev/sdb1
logical name: 	
/media/krzysztof/CCFD-F070
version: 	FAT16
serial: 	ccfd-f070
size: 	961MiB
capacity: 	962MiB
capabilities: 	primary fat initialized
configuration:	
FATs	=	2
filesystem	=	fat
mount.fstype	=	vfat
mount.options	=	rw,nosuid,nodev,relatime,uid=1000,gid=1000,fmask=0022,dmask=0022,codepage=437,iocharset=utf8,shortname=mixed,showexec,utf8,flush,errors=remount-ro
state	=	mounted
id:	
isa
description: 	ISA bridge
product: 	VT8235 ISA Bridge
vendor: 	VIA Technologies, Inc.
physical id: 	
11
bus info: 	
pci@0000:00:11.0
version: 	00
width: 	32 bits
clock: 	33MHz
capabilities: 	isa pm bus_master cap_list
configuration:	
latency	=	0
id:	
ide
description: 	IDE interface
product: 	VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE
vendor: 	VIA Technologies, Inc.
physical id: 	
11.1
bus info: 	
pci@0000:00:11.1
version: 	06
width: 	32 bits
clock: 	33MHz
capabilities: 	ide pm bus_master cap_list
configuration:	
driver	=	pata_via
latency	=	32
resources:	
irq	:	255
ioport	:	1f0(size=8)
ioport	:	3f6
ioport	:	170(size=8)
ioport	:	376
ioport	:	fc00(size=16)
id:	
multimedia
description: 	Multimedia audio controller
product: 	VT8233/A/8235/8237 AC97 Audio Controller
vendor: 	VIA Technologies, Inc.
physical id: 	
11.5
bus info: 	
pci@0000:00:11.5
version: 	50
width: 	32 bits
clock: 	33MHz
capabilities: 	pm cap_list
configuration:	
driver	=	snd_via82xx
latency	=	0
resources:	
irq	:	22
ioport	:	e000(size=256)
id:	
network
description: 	Ethernet interface
product: 	VT6102/VT6103 [Rhine-II]
vendor: 	VIA Technologies, Inc.
physical id: 	
12
bus info: 	
pci@0000:00:12.0
logical name: 	
enp0s18
version: 	74
serial: 	00:0c:6e:05:c9:f6
size: 	10Mbit/s
capacity: 	100Mbit/s
width: 	32 bits
clock: 	33MHz
capabilities: 	pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration:	
autonegotiation	=	on
broadcast	=	yes
driver	=	via-rhine
driverversion	=	1.5.1
duplex	=	half
latency	=	32
link	=	no
maxlatency	=	8
mingnt	=	3
multicast	=	yes
port	=	MII
speed	=	10Mbit/s
resources:	
irq	:	23
ioport	:	dc00(size=256)
memory	:	dffdfe00-dffdfeff
id:	
scsi
physical id: 	
2
logical name: 	
scsi0
capabilities: 	emulated
id:	
disk
description: 	ATA Disk
product: 	SAMSUNG SV3063H
physical id: 	
0.0.0
bus info: 	
scsi@0:0.0.0
logical name: 	
/dev/sda
version: 	0-11
serial: 	0271J1FN929585
size: 	28GiB (30GB)
capabilities: 	partitioned partitioned:dos
configuration:	
ansiversion	=	5
logicalsectorsize	=	512
sectorsize	=	512
signature	=	40f49d3a
id:	
volume:0
description: 	EXT4 volume
vendor: 	Linux
physical id: 	
1
bus info: 	
scsi@0:0.0.0,1
logical name: 	
/dev/sda1
logical name: 	
/
version: 	1.0
serial: 	befac79c-7951-4f7d-95a8-a2d8e84094a6
size: 	7398MiB
capacity: 	7398MiB
capabilities: 	primary bootable journaled extended_attributes large_files huge_files dir_nlink extents ext4 ext2 initialized
configuration:	
created	=	2016-01-26 18:18:17
filesystem	=	ext4
label	=	debian
lastmountpoint	=	/
modified	=	2016-10-13 04:07:37
mount.fstype	=	ext4
mount.options	=	rw,relatime,errors=remount-ro,data=ordered
mounted	=	2016-10-12 23:14:20
state	=	mounted
id:	
volume:1
description: 	Extended partition
physical id: 	
2
bus info: 	
scsi@0:0.0.0,2
logical name: 	
/dev/sda2
size: 	21GiB
capacity: 	21GiB
capabilities: 	primary extended partitioned partitioned:extended
id:	
logicalvolume:0
description: 	Linux swap volume
physical id: 	
5
logical name: 	
/dev/sda5
version: 	1
serial: 	1923ae7e-95f3-40b0-a52c-4600bf3fa579
size: 	943MiB
capacity: 	943MiB
capabilities: 	nofs swap initialized
configuration:	
filesystem	=	swap
pagesize	=	4096
id:	
logicalvolume:1
description: 	EXT4 volume
vendor: 	Linux
physical id: 	
6
logical name: 	
/dev/sda6
logical name: 	
/home
version: 	1.0
serial: 	556ea38e-d1aa-4e9d-92e4-b991020f1a84
size: 	10GiB
capacity: 	10GiB
capabilities: 	journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized
configuration:	
created	=	2016-01-26 18:18:24
filesystem	=	ext4
label	=	home
lastmountpoint	=	/home
modified	=	2016-10-13 04:07:50
mount.fstype	=	ext4
mount.options	=	rw,relatime,data=ordered
mounted	=	2016-10-13 04:07:50
state	=	mounted
id:	
logicalvolume:2
description: 	EXT4 volume
vendor: 	Linux
physical id: 	
7
logical name: 	
/dev/sda7
version: 	1.0
serial: 	7495a20b-efc8-42ac-8ae9-50a142b4f9d2
size: 	1707MiB
capacity: 	1707MiB
capabilities: 	journaled extended_attributes large_files huge_files dir_nlink 64bit extents ext4 ext2 initialized
configuration:	
created	=	2016-10-12 07:03:25
filesystem	=	ext4
label	=	temp
lastmountpoint	=	/media/sda7
modified	=	2016-10-12 07:30:14
mounted	=	2016-10-12 07:20:37
state	=	clean
id:	
logicalvolume:3
description: 	EXT4 volume
vendor: 	Linux
physical id: 	
8
logical name: 	
/dev/sda8
version: 	1.0
serial: 	c66050ce-4ad0-4ba3-b99b-fbfc5ecdbc5c
size: 	8216MiB
capacity: 	8216MiB
capabilities: 	journaled extended_attributes large_files huge_files dir_nlink 64bit extents ext4 ext2 initialized
configuration:	
created	=	2016-10-12 07:03:36
filesystem	=	ext4
label	=	temp_deb
modified	=	2016-10-12 07:05:45
state	=	clean

[tokirium]

Czy ktoś ma jakiś pomysł jak to rozwiązać?

[dedito]

Pokaż:

Kod: Zaznacz cały

sudo ifconfig -a

Kod: Zaznacz cały

dmesg

[tokirium]

dmesg

Kod: Zaznacz cały

[    0.000000] Linux version 4.6.0-1-686-pae (debian-kernel@lists.debian.org) (gcc version 5.4.0 20160609 (Debian 5.4.0-6) ) #1 SMP Debian 4.6.4-1 (2016-07-18)
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000d7fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffeffff] usable
[    0.000000] BIOS-e820: [mem 0x000000003fff0000-0x000000003fff7fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000003fff8000-0x000000003fffffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] Legacy DMI 2.3 present.
[    0.000000] DMI:          K7VT2/K7VT2, BIOS P1.20 12/10/2002
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x3fff0 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FC0000000 write-back
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 base 0E0000000 mask FFC000000 write-combining
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] initial memory mapped: [mem 0x00000000-0x01dfffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] BRK [0x018ed000, 0x018edfff] PGTABLE
[    0.000000] BRK [0x018ee000, 0x018effff] PGTABLE
[    0.000000] BRK [0x018f0000, 0x018f0fff] PGTABLE
[    0.000000] BRK [0x018f1000, 0x018f1fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x360be000-0x37056fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FA8E0 000014 (v00 AMI   )
[    0.000000] ACPI: RSDT 0x000000003FFF0000 00002C (v01 AMIINT VIA_K7   00000010 MSFT 00000097)
[    0.000000] ACPI: FACP 0x000000003FFF0030 000081 (v01 AMIINT VIA_K7   00000011 MSFT 00000097)
[    0.000000] ACPI: DSDT 0x000000003FFF0120 0031A3 (v01 VIA    KT266A   00001000 MSFT 0100000D)
[    0.000000] ACPI: FACS 0x000000003FFF8000 000040
[    0.000000] ACPI: APIC 0x000000003FFF00C0 000054 (v01 AMIINT VIA_K7   00000009 MSFT 00000097)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 133MB HIGHMEM available.
[    0.000000] 889MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 379fe000
[    0.000000]   low ram: 0 - 379fe000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x00000000379fdfff]
[    0.000000]   HighMem  [mem 0x00000000379fe000-0x000000003ffeffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000003ffeffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000003ffeffff]
[    0.000000] On node 0 totalpages: 262030
[    0.000000] free_area_init_node: node 0, pgdat c1796780, node_mem_map f70fe024
[    0.000000]   DMA zone: 36 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 1967 pages used for memmap
[    0.000000]   Normal zone: 223742 pages, LIFO batch:31
[    0.000000]   HighMem zone: 34290 pages, LIFO batch:7
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000d1fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000d2000-0x000d7fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000d8000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0x40000000-0xfebfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] percpu: Embedded 18 pages/cpu @f70e5000 s43916 r0 d29812 u73728
[    0.000000] pcpu-alloc: s43916 r0 d29812 u73728 alloc=18*4096
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260027
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.6.0-1-686-pae root=UUID=befac79c-7951-4f7d-95a8-a2d8e84094a6 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000379fe:0003fff0)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 1012812K/1048120K available (5587K kernel code, 629K rwdata, 1636K rodata, 716K init, 468K bss, 35308K reserved, 0K cma-reserved, 137160K highmem)
[    0.000000] virtual kernel memory layout:
                   fixmap  : 0xffd36000 - 0xfffff000   (2852 kB)
                   pkmap   : 0xffa00000 - 0xffc00000   (2048 kB)
                   vmalloc : 0xf81fe000 - 0xff9fe000   ( 120 MB)
                   lowmem  : 0xc0000000 - 0xf79fe000   ( 889 MB)
                     .init : 0xc17af000 - 0xc1862000   ( 716 kB)
                     .data : 0xc157526b - 0xc17ad540   (2272 kB)
                     .text : 0xc1000000 - 0xc157526b   (5588 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 32.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=1.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
[    0.000000] NR_IRQS:2304 nr_irqs:256 16
[    0.000000] CPU 0 irqstacks, hard=f5c2c000 soft=f5c2e000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1199.486 MHz processor
[    0.004026] Calibrating delay loop (skipped), value calculated using timer frequency.. 2398.97 BogoMIPS (lpj=4797944)
[    0.004036] pid_max: default: 32768 minimum: 301
[    0.004085] ACPI: Core revision 20160108
[    0.015490] ACPI: 1 ACPI AML tables successfully acquired and loaded

[    0.015572] Security Framework initialized
[    0.015580] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.015606] AppArmor: AppArmor disabled by boot time parameter
[    0.015643] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.015649] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.016668] Disabling memory control group subsystem
[    0.016768] mce: CPU supports 4 MCE banks
[    0.016802] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.016808] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.028109] Freeing SMP alternatives memory: 24K (c1862000 - c1868000)
[    0.031388] ftrace: allocating 23336 entries in 46 pages
[    0.044326] smpboot: Max logical packages: 1
[    0.044338] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.044353] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.045592] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.088000] smpboot: CPU0: AMD Athlon(tm) (family: 0x6, model: 0x8, stepping: 0x1)
[    0.088000] Performance Events: AMD PMU driver.
[    0.088000] ... version:                0
[    0.088000] ... bit width:              48
[    0.088000] ... generic registers:      4
[    0.088000] ... value mask:             0000ffffffffffff
[    0.088000] ... max period:             00007fffffffffff
[    0.088000] ... fixed-purpose events:   0
[    0.088000] ... event mask:             000000000000000f
[    0.088000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.088000] x86: Booted up 1 node, 1 CPUs
[    0.088000] smpboot: Total of 1 processors activated (2398.97 BogoMIPS)
[    0.088000] devtmpfs: initialized
[    0.088000] PM: Registering ACPI NVS region [mem 0x3fff8000-0x3fffffff] (32768 bytes)
[    0.088000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.088000] pinctrl core: initialized pinctrl subsystem
[    0.088224] NET: Registered protocol family 16
[    0.088670] cpuidle: using governor ladder
[    0.088678] cpuidle: using governor menu
[    0.088819] ACPI: bus type PCI registered
[    0.088826] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.089016] PCI: Using configuration type 1 for base access
[    0.091746] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.092689] ACPI: Added _OSI(Module Device)
[    0.092696] ACPI: Added _OSI(Processor Device)
[    0.092700] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.092704] ACPI: Added _OSI(Processor Aggregator Device)
[    0.098756] ACPI: Interpreter enabled
[    0.098806] ACPI: (supports S0 S1 S4 S5)
[    0.098811] ACPI: Using IOAPIC for interrupt routing
[    0.098890] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.100314] ACPI: Power Resource [URP1] (off)
[    0.102502] ACPI: Power Resource [URP2] (off)
[    0.102625] ACPI: Power Resource [FDDP] (off)
[    0.102742] ACPI: Power Resource [LPTP] (off)
[    0.108453] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.108472] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[    0.108488] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.108500] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.108614] acpi PNP0A03:00: host bridge window expanded to [mem 0x40000000-0xffdfffff window]; [mem 0xfee01000-0xffdfffff window] ignored
[    0.108945] PCI host bridge to bus 0000:00
[    0.108955] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.108960] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.108966] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.108971] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.108977] pci_bus 0000:00: root bus resource [mem 0x40000000-0xffdfffff window]
[    0.108983] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.109012] pci 0000:00:00.0: [1106:3099] type 00 class 0x060000
[    0.109033] pci 0000:00:00.0: reg 0x10: [mem 0xe0000000-0xe3ffffff pref]
[    0.109291] pci 0000:00:01.0: [1106:b099] type 01 class 0x060400
[    0.109352] pci 0000:00:01.0: supports D1
[    0.109535] pci 0000:00:0a.0: [1186:1300] type 00 class 0x020000
[    0.109556] pci 0000:00:0a.0: reg 0x10: [io  0xec00-0xecff]
[    0.109569] pci 0000:00:0a.0: reg 0x14: [mem 0xdfffff00-0xdfffffff]
[    0.109642] pci 0000:00:0a.0: supports D1 D2
[    0.109648] pci 0000:00:0a.0: PME# supported from D1 D2 D3hot D3cold
[    0.109852] pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300
[    0.109900] pci 0000:00:10.0: reg 0x20: [io  0xe000-0xe01f]
[    0.109951] pci 0000:00:10.0: supports D1 D2
[    0.109956] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.110043] pci 0000:00:10.0: System wakeup disabled by ACPI
[    0.110189] pci 0000:00:10.1: [1106:3038] type 00 class 0x0c0300
[    0.110237] pci 0000:00:10.1: reg 0x20: [io  0xe400-0xe41f]
[    0.110287] pci 0000:00:10.1: supports D1 D2
[    0.110293] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.110373] pci 0000:00:10.1: System wakeup disabled by ACPI
[    0.110515] pci 0000:00:10.2: [1106:3038] type 00 class 0x0c0300
[    0.110563] pci 0000:00:10.2: reg 0x20: [io  0xe800-0xe81f]
[    0.110613] pci 0000:00:10.2: supports D1 D2
[    0.110619] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.110699] pci 0000:00:10.2: System wakeup disabled by ACPI
[    0.110842] pci 0000:00:10.3: [1106:3104] type 00 class 0x0c0320
[    0.110863] pci 0000:00:10.3: reg 0x10: [mem 0xdffffe00-0xdffffeff]
[    0.110941] pci 0000:00:10.3: supports D1 D2
[    0.110946] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.111037] pci 0000:00:10.3: System wakeup disabled by ACPI
[    0.111187] pci 0000:00:11.0: [1106:3177] type 00 class 0x060100
[    0.111257] HPET not enabled in BIOS. You might try hpet=force boot option
[    0.111271] pci 0000:00:11.0: can't claim BAR 13 [io  0x0800-0x087f]: address conflict with ACPI CPU throttle [io  0x0810-0x0815]
[    0.111278] pci 0000:00:11.0: quirk: [io  0x0400-0x040f] claimed by vt8235 SMB
[    0.111490] pci 0000:00:11.1: [1106:0571] type 00 class 0x01018a
[    0.111541] pci 0000:00:11.1: reg 0x20: [io  0xfc00-0xfc0f]
[    0.111565] pci 0000:00:11.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.111570] pci 0000:00:11.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.111575] pci 0000:00:11.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.111579] pci 0000:00:11.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.111801] pci 0000:00:11.5: [1106:3059] type 00 class 0x040100
[    0.111822] pci 0000:00:11.5: reg 0x10: [io  0xdc00-0xdcff]
[    0.111904] pci 0000:00:11.5: supports D1 D2
[    0.111982] pci 0000:00:11.5: System wakeup disabled by ACPI
[    0.112154] pci 0000:00:12.0: [1106:3065] type 00 class 0x020000
[    0.112175] pci 0000:00:12.0: reg 0x10: [io  0xd800-0xd8ff]
[    0.112188] pci 0000:00:12.0: reg 0x14: [mem 0xdffffd00-0xdffffdff]
[    0.112262] pci 0000:00:12.0: supports D1 D2
[    0.112267] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.112349] pci 0000:00:12.0: System wakeup disabled by ACPI
[    0.112592] pci 0000:01:00.0: [10de:002d] type 00 class 0x030000
[    0.112611] pci 0000:01:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
[    0.112623] pci 0000:01:00.0: reg 0x14: [mem 0xda000000-0xdbffffff pref]
[    0.112656] pci 0000:01:00.0: reg 0x30: [mem 0xdfef0000-0xdfefffff pref]
[    0.112834] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.112845] pci 0000:00:01.0:   bridge window [mem 0xdde00000-0xdfefffff]
[    0.112853] pci 0000:00:01.0:   bridge window [mem 0xd9d00000-0xddcfffff pref]
[    0.112865] pci_bus 0000:00: on NUMA node 0
[    0.114394] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.114547] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.114694] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.114840] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.115553] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.115561] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.115564] vgaarb: loaded
[    0.115569] vgaarb: bridge control possible 0000:01:00.0
[    0.115924] PCI: Using ACPI for IRQ routing
[    0.115931] PCI: pci_cache_line_size set to 32 bytes
[    0.116018] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.116025] e820: reserve RAM buffer [mem 0x3fff0000-0x3fffffff]
[    0.116677] clocksource: Switched to clocksource refined-jiffies
[    0.142636] VFS: Disk quotas dquot_6.6.0
[    0.142705] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.143128] pnp: PnP ACPI init
[    0.143513] pnp 00:00: [dma 2]
[    0.143657] pnp 00:00: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.144267] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.145270] pnp 00:02: [dma 0 disabled]
[    0.145479] pnp 00:02: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.145865] pnp 00:03: Plug and Play ACPI device, IDs PNPb02f (active)
[    0.146281] pnp 00:04: Plug and Play ACPI device, IDs PNPb006 (active)
[    0.146467] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.146658] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.146927] pnp: PnP ACPI: found 7 devices
[    0.146941] PnPBIOS: Disabled by ACPI PNP
[    0.187713] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.187757] clocksource: Switched to clocksource acpi_pm
[    0.187819] pci 0000:00:11.0: BAR 13: [io  size 0x0080] has bogus alignment
[    0.187834] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.187847] pci 0000:00:01.0:   bridge window [mem 0xdde00000-0xdfefffff]
[    0.187855] pci 0000:00:01.0:   bridge window [mem 0xd9d00000-0xddcfffff pref]
[    0.187868] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.187873] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.187878] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.187884] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.187889] pci_bus 0000:00: resource 8 [mem 0x40000000-0xffdfffff window]
[    0.187895] pci_bus 0000:01: resource 1 [mem 0xdde00000-0xdfefffff]
[    0.187900] pci_bus 0000:01: resource 2 [mem 0xd9d00000-0xddcfffff pref]
[    0.187900] NET: Registered protocol family 2
[    0.187900] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.187900] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.187900] TCP: Hash tables configured (established 8192 bind 8192)
[    0.187900] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.187900] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.187900] NET: Registered protocol family 1
[    0.187900] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[    0.187900] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.187900] PCI: CLS 32 bytes, default 32
[    0.187900] Unpacking initramfs...
[    1.056001] Freeing initrd memory: 15972K (f60be000 - f7057000)
[    1.057459] futex hash table entries: 256 (order: 2, 16384 bytes)
[    1.057553] audit: initializing netlink subsys (disabled)
[    1.057622] audit: type=2000 audit(1476565017.055:1): initialized
[    1.058457] Initialise system trusted keyring
[    1.058765] workingset: timestamp_bits=12 max_order=18 bucket_order=6
[    1.058837] zbud: loaded
[    1.498082] Key type asymmetric registered
[    1.498096] Asymmetric key parser 'x509' registered
[    1.498149] bounce: pool size: 64 pages
[    1.498233] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    1.498329] io scheduler noop registered
[    1.498337] io scheduler deadline registered
[    1.498362] io scheduler cfq registered (default)
[    1.498679] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.498708] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.498858] GHES: HEST is not enabled!
[    1.498933] isapnp: Scanning for PnP cards...
[    1.852499] isapnp: No Plug & Play device found
[    1.852787] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.873153] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.874294] Linux agpgart interface v0.103
[    1.874645] agpgart: Detected VIA KT266/KY266x/KT333 chipset
[    1.879884] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xe0000000
[    1.880481] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    1.880487] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    1.880783] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.881181] mousedev: PS/2 mouse device common for all mice
[    1.881331] rtc_cmos 00:05: RTC can wake from S4
[    1.881644] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    1.881702] rtc_cmos 00:05: alarms up to one year, y3k, 114 bytes nvram
[    1.881740] ledtrig-cpu: registered to indicate activity on CPUs
[    1.882786] NET: Registered protocol family 10
[    1.883433] mip6: Mobile IPv6
[    1.883443] NET: Registered protocol family 17
[    1.883456] mpls_gso: MPLS GSO support
[    1.883867] microcode: AMD CPU family 0x6 not supported
[    1.883899] Using IPI No-Shortcut mode
[    1.884475] registered taskstats version 1
[    1.884507] Loading compiled-in X.509 certificates
[    1.889433] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
[    1.891962] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
[    1.892151] zswap: loaded using pool lzo/zbud
[    1.892849] rtc_cmos 00:05: setting system clock to 2016-10-15 20:56:59 UTC (1476565019)
[    1.893047] PM: Hibernation image not present or could not be loaded.
[    1.894849] Freeing unused kernel memory: 716K (c17af000 - c1862000)
[    1.895048] Write protecting the kernel text: 5592k
[    1.895137] Write protecting the kernel read-only data: 1640k
[    1.905613] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.945295] random: systemd-udevd urandom read with 0 bits of entropy available
[    2.056160] tsc: Refined TSC clocksource calibration: 1199.423 MHz
[    2.056178] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1149faa27d0, max_idle_ns: 440795220627 ns
[    2.107362] mii: module verification failed: signature and/or required key missing - tainting kernel
[    2.108859] 8139too: 8139too Fast Ethernet driver 0.9.28
[    2.110050] 8139too 0000:00:0a.0 eth0: RealTek RTL8139 at 0xf8212f00, 00:05:5d:4f:6b:96, IRQ 18
[    2.146356] ACPI: bus type USB registered
[    2.146456] usbcore: registered new interface driver usbfs
[    2.146497] usbcore: registered new interface driver hub
[    2.164271] usbcore: registered new device driver usb
[    2.166167] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.167400] uhci_hcd: USB Universal Host Controller Interface driver
[    2.167813] uhci_hcd 0000:00:10.0: UHCI Host Controller
[    2.167839] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[    2.167858] uhci_hcd 0000:00:10.0: detected 2 ports
[    2.167916] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000e000
[    2.176269] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    2.176283] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.176288] usb usb1: Product: UHCI Host Controller
[    2.176293] usb usb1: Manufacturer: Linux 4.6.0-1-686-pae uhci_hcd
[    2.176297] usb usb1: SerialNumber: 0000:00:10.0
[    2.176834] hub 1-0:1.0: USB hub found
[    2.176861] hub 1-0:1.0: 2 ports detected
[    2.177520] uhci_hcd 0000:00:10.1: UHCI Host Controller
[    2.177541] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[    2.177557] uhci_hcd 0000:00:10.1: detected 2 ports
[    2.177591] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000e400
[    2.177754] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.177760] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.177765] usb usb2: Product: UHCI Host Controller
[    2.177770] usb usb2: Manufacturer: Linux 4.6.0-1-686-pae uhci_hcd
[    2.177774] usb usb2: SerialNumber: 0000:00:10.1
[    2.183233] hub 2-0:1.0: USB hub found
[    2.184593] hub 2-0:1.0: 2 ports detected
[    2.189853] uhci_hcd 0000:00:10.2: UHCI Host Controller
[    2.189881] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[    2.189898] uhci_hcd 0000:00:10.2: detected 2 ports
[    2.189935] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e800
[    2.190135] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    2.190142] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.190147] usb usb3: Product: UHCI Host Controller
[    2.190152] usb usb3: Manufacturer: Linux 4.6.0-1-686-pae uhci_hcd
[    2.190157] usb usb3: SerialNumber: 0000:00:10.2
[    2.210615] hub 3-0:1.0: USB hub found
[    2.210673] hub 3-0:1.0: 2 ports detected
[    2.272324] Floppy drive(s): fd0 is 1.44M
[    2.292405] FDC 0 is a post-1991 82077
[    2.347643] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker
[    2.353460] ehci-pci: EHCI PCI platform driver
[    2.380572] SCSI subsystem initialized
[    2.388846] via-rhine 0000:00:12.0 eth1: VIA Rhine II at 0x1d800, 00:0c:6e:05:c9:f6, IRQ 23
[    2.389649] via-rhine 0000:00:12.0 eth1: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1
[    2.433251] libata version 3.00 loaded.
[    2.500204] usb 2-2: new low-speed USB device number 2 using uhci_hcd
[    2.673704] usb 2-2: New USB device found, idVendor=1c4f, idProduct=0003
[    2.673718] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.673723] usb 2-2: Product: Usb Mouse
[    2.673728] usb 2-2: Manufacturer: SIGMACHIP
[    2.677208] usb 2-2: USB disconnect, device number 2
[    2.700530] ehci-pci 0000:00:10.3: EHCI Host Controller
[    2.700567] ehci-pci 0000:00:10.3: new USB bus registered, assigned bus number 4
[    2.700684] ehci-pci 0000:00:10.3: irq 21, io mem 0xdffffe00
[    2.712183] ehci-pci 0000:00:10.3: USB 2.0 started, EHCI 1.00
[    2.712400] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[    2.712407] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.712412] usb usb4: Product: EHCI Host Controller
[    2.712417] usb usb4: Manufacturer: Linux 4.6.0-1-686-pae ehci_hcd
[    2.712421] usb usb4: SerialNumber: 0000:00:10.3
[    2.712931] hub 4-0:1.0: USB hub found
[    2.712963] hub 4-0:1.0: 6 ports detected
[    2.736424] hub 1-0:1.0: USB hub found
[    2.736460] hub 1-0:1.0: 2 ports detected
[    2.760549] hub 2-0:1.0: USB hub found
[    2.760584] hub 2-0:1.0: 2 ports detected
[    2.784441] hub 3-0:1.0: USB hub found
[    2.784482] hub 3-0:1.0: 2 ports detected
[    2.785106] pata_via 0000:00:11.1: version 0.3.4
[    2.785356] pata_via 0000:00:11.1: can't derive routing for PCI INT A
[    2.798131] scsi host0: pata_via
[    2.816176] scsi host1: pata_via
[    2.816467] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[    2.816474] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[    2.987084] ata1.00: ATA-6: SAMSUNG SV3063H, PL100-11, max UDMA/100
[    2.987098] ata1.00: 59797584 sectors, multi 16: LBA 
[    2.987115] ata1.01: ATAPI: CRD-8322B, 1.10, max MWDMA2
[    2.989942] ata1.00: configured for UDMA/100
[    2.992795] ata1.01: configured for MWDMA2
[    2.996194] 8139too 0000:00:0a.0 enp0s10: renamed from eth0
[    3.001461] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG SV3063H  0-11 PQ: 0 ANSI: 5
[    3.011235] scsi 0:0:1:0: CD-ROM               LG    CD-ROM CRD-8322B 1.10 PQ: 0 ANSI: 5
[    3.066527] clocksource: Switched to clocksource tsc
[    3.106944] via-rhine 0000:00:12.0 enp0s18: renamed from eth1
[    3.200153] usb 2-2: new low-speed USB device number 3 using uhci_hcd
[    3.272839] sd 0:0:0:0: [sda] 59797584 512-byte logical blocks: (30.6 GB/28.5 GiB)
[    3.272984] sd 0:0:0:0: [sda] Write Protect is off
[    3.272993] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.273053] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.288260] sr 0:0:1:0: [sr0] scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray
[    3.288276] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.289993] sr 0:0:1:0: Attached scsi CD-ROM sr0
[    3.355402]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[    3.362649] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.373192] usb 2-2: New USB device found, idVendor=1c4f, idProduct=0003
[    3.373205] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.373211] usb 2-2: Product: Usb Mouse
[    3.373215] usb 2-2: Manufacturer: SIGMACHIP
[    3.418039] hidraw: raw HID events driver (C) Jiri Kosina
[    3.449018] usbcore: registered new interface driver usbhid
[    3.449033] usbhid: USB HID core driver
[    3.479953] input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:10.1/usb2/2-2/2-2:1.0/0003:1C4F:0003.0001/input/input1
[    3.481017] hid-generic 0003:1C4F:0003.0001: input,hidraw0: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:00:10.1-2/input0
[    6.352117] usb 2-2: USB disconnect, device number 3
[    7.760033] usb 2-2: new low-speed USB device number 4 using uhci_hcd
[    7.933980] usb 2-2: New USB device found, idVendor=1c4f, idProduct=0003
[    7.933988] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    7.933993] usb 2-2: Product: Usb Mouse
[    7.933998] usb 2-2: Manufacturer: SIGMACHIP
[    7.951928] input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:10.1/usb2/2-2/2-2:1.0/0003:1C4F:0003.0002/input/input2
[    7.953574] hid-generic 0003:1C4F:0003.0002: input,hidraw0: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:00:10.1-2/input0
[   15.632358] blk_update_request: I/O error, dev fd0, sector 0
[   15.632428] floppy: error -5 while reading block 0
[   15.651873] PM: Starting manual resume from disk
[   15.651895] PM: Hibernation image partition 8:5 present
[   15.651899] PM: Looking for hibernation image.
[   15.667175] PM: Image not found (code -22)
[   15.667181] PM: Hibernation image not present or could not be loaded.
[   16.095440] random: nonblocking pool is initialized
[   16.162555] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   17.941936] systemd[1]: systemd 231 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[   17.942354] systemd[1]: Detected architecture x86.
[   17.984387] systemd[1]: Set hostname to <Krzys-db>.
[   20.742532] systemd[1]: rsyslog.service: Cannot add dependency job, ignoring: Unit rsyslog.service is masked.
[   20.746061] systemd[1]: Created slice User and Session Slice.
[   20.746368] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[   20.746499] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   20.746892] systemd[1]: Created slice System Slice.
[   20.747284] systemd[1]: Created slice system-getty.slice.
[   20.747456] systemd[1]: Listening on udev Kernel Socket.
[   20.747736] systemd[1]: Listening on Journal Audit Socket.
[   20.747858] systemd[1]: Listening on fsck to fsckd communication Socket.
[   20.747907] systemd[1]: Reached target Encrypted Volumes.
[   20.748190] systemd[1]: Listening on Journal Socket.
[   20.750325] systemd[1]: Mounting Debug File System...
[   20.753596] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[   20.761808] systemd[1]: Starting Uncomplicated firewall...
[   20.906154] systemd[1]: Starting Load Kernel Modules...
[   20.910683] systemd[1]: Mounting Huge Pages File System...
[   20.915570] systemd[1]: Mounting POSIX Message Queue File System...
[   20.924461] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[   20.924616] systemd[1]: Reached target Slices.
[   20.926948] systemd[1]: Mounting RPC Pipe File System...
[   20.927276] systemd[1]: Listening on RPCbind Server Activation Socket.
[   20.927527] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   20.936833] systemd[1]: Starting Remount Root and Kernel File Systems...
[   20.937478] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   20.974437] systemd[1]: Listening on udev Control Socket.
[   20.974699] systemd[1]: Listening on Journal Socket (/dev/log).
[   20.977433] systemd[1]: Starting Journal Service...
[   20.982138] systemd[1]: Starting Set the console keyboard layout...
[   21.056384] systemd[1]: Started Create list of required static device nodes for the current kernel.
[   21.059809] systemd[1]: Starting Create Static Device Nodes in /dev...
[   21.376455] systemd[1]: Started Uncomplicated firewall.
[   21.458083] systemd[1]: Mounted Debug File System.
[   21.458243] systemd[1]: Mounted POSIX Message Queue File System.
[   21.458319] systemd[1]: Mounted Huge Pages File System.
[   21.485771] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   21.490393] systemd[1]: Started Remount Root and Kernel File Systems.
[   21.542773] systemd[1]: Starting udev Coldplug all Devices...
[   21.549775] systemd[1]: Starting Load/Save Random Seed...
[   21.558645] systemd[1]: Started Journal Service.
[   21.767170] lp: driver loaded but no devices found
[   21.934471] ppdev: user-space parallel port driver
[   22.030744] RPC: Registered named UNIX socket transport module.
[   22.030757] RPC: Registered udp transport module.
[   22.030761] RPC: Registered tcp transport module.
[   22.030764] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   22.078543] parport_pc 00:02: reported by Plug and Play ACPI
[   22.078704] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[   22.172430] lp0: using parport0 (interrupt-driven).
[   22.491475] systemd-journald[499]: Received request to flush runtime journal from PID 1
[   22.505032] w83627hf: w83627hf: Found W83697HF chip at 0x290
[   24.367631] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[   24.367651] ACPI: Power Button [PWRB]
[   24.367900] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
[   24.367907] ACPI: Sleep Button [SLPB]
[   24.368699] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[   24.368710] ACPI: Power Button [PWRF]
[   24.458246] NET: Registered protocol family 23
[   24.466910] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   24.526516] via-ircc 0000:00:11.0: can't enable device: BAR 13 [io  size 0x0080] not assigned
[   24.897955] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   24.898112] sr 0:0:1:0: Attached scsi generic sg1 type 5
[   24.979285] gameport gameport0: NS558 PnP Gameport is pnp00:03/gameport0, io 0x200, speed 953kHz
[   25.067181] [drm] Initialized drm 1.1.0 20060810
[   25.353803] wmi: Mapper loaded
[   25.675852] nouveau 0000:01:00.0: NVIDIA NV05 (20154000)
[   25.716750] nouveau 0000:01:00.0: bios: version 02.05.13.00.00
[   25.740051] nouveau 0000:01:00.0: bios: DCB table not found
[   25.740245] nouveau 0000:01:00.0: bios: DCB table not found
[   25.740336] nouveau 0000:01:00.0: bios: DCB table not found
[   25.740344] nouveau 0000:01:00.0: bios: DCB table not found
[   25.740375] nouveau 0000:01:00.0: bios: DCB table not found
[   25.741086] agpgart-via 0000:00:00.0: AGP 2.0 bridge
[   25.741109] agpgart-via 0000:00:00.0: putting AGP V2 device into 4x mode
[   25.741154] nouveau 0000:01:00.0: putting AGP V2 device into 4x mode
[   25.741207] nouveau 0000:01:00.0: tmr: unknown input clock freq
[   25.741219] nouveau 0000:01:00.0: fb: 32 MiB SDRAM
[   25.766982] [TTM] Zone  kernel: Available graphics memory: 446182 kiB
[   25.766994] [TTM] Zone highmem: Available graphics memory: 514762 kiB
[   25.766997] [TTM] Initializing pool allocator
[   25.767022] [TTM] Initializing DMA pool allocator
[   25.767074] nouveau 0000:01:00.0: DRM: VRAM: 31 MiB
[   25.767080] nouveau 0000:01:00.0: DRM: GART: 64 MiB
[   25.767088] nouveau 0000:01:00.0: DRM: BMP version 2.1
[   25.767096] nouveau 0000:01:00.0: DRM: No DCB data found in VBIOS
[   25.772430] nouveau 0000:01:00.0: DRM: Saving VGA fonts
[   25.856191] nouveau 0000:01:00.0: DRM: No DCB data found in VBIOS
[   25.856877] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   25.856881] [drm] Driver supports precise vblank timestamp query.
[   25.859754] nouveau 0000:01:00.0: DRM: MM: using M2MF for buffer copies
[   25.960813] nouveau 0000:01:00.0: DRM: allocated 1280x1024 fb: 0x4000, bo f4eedc00
[   25.965526] fbcon: nouveaufb (fb0) is primary device
[   26.185920] Console: switching to colour frame buffer device 160x64
[   26.187418] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[   26.187432] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[   26.881118] input: PC Speaker as /devices/platform/pcspkr/input/input6
[   27.793242] Adding 965628k swap on /dev/sda5.  Priority:-1 extents:1 across:965628k FS
[   28.617473] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   37.412319] blk_update_request: I/O error, dev fd0, sector 0
[   37.412369] floppy: error -5 while reading block 0

ifconfig -a

Kod: Zaznacz cały

enp0s10: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 00:05:5d:4f:6b:96  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

enp0s18: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 00:0c:6e:05:c9:f6  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1  (Local Loopback)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

Zapomnialem wyjac dodatkowa karte sieciowa D-Link, ktora tez probowalem uruchomic, Debian pokazuje ja w logach, ale w interfaces dalej jest tylko lo. Puppy Linux wykrywa obie i moge wybierac inerfejsy eth0, eth1 lub wlan0 (jak podlacze bezprzewodowy modem usb) do polaczenia z internetem.
P.S. Puppy (i wszystkie jego odmiany) jest niesamowity - dziala zarowno na starym sprzecie, jak i na dwurdzeniowych architekturach i praktycznie wszystko od razu wykrywa i obsluguje, nawet lepiej niz Windows XP Gdyby nie male repozytoria i przestarzala przegladarka to bym przy nim pozostal, a byl nawet szybszy od Debiana

[LordRuthwen]

Jak to dalej jest tylko lo, a to niby co jest?

Kod: Zaznacz cały

enp0s10: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 00:05:5d:4f:6b:96  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

enp0s18: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 00:0c:6e:05:c9:f6  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

Kod: Zaznacz cały

[    2.996194] 8139too 0000:00:0a.0 enp0s10: renamed from eth0
[    3.001461] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG SV3063H  0-11 PQ: 0 ANSI: 5
[    3.011235] scsi 0:0:1:0: CD-ROM               LG    CD-ROM CRD-8322B 1.10 PQ: 0 ANSI: 5
[    3.066527] clocksource: Switched to clocksource tsc
[    3.106944] via-rhine 0000:00:12.0 enp0s18: renamed from eth1

[tokirium]

samo polecenie ifconfig, bez opcji -a pokazuje tylko lo.
Mam w etc/network/interfaces zamienić eth0 na enp0s10 lub enp0s18?

[lizard]

Kod: Zaznacz cały

[    2.996194] 8139too 0000:00:0a.0 enp0s10: renamed from eth0
[...]
[    3.106944] via-rhine 0000:00:12.0 enp0s18: renamed from eth1

Zmień w /etc/network/interfaces:

Kod: Zaznacz cały

allow-hotplug eth0
iface eth0 inet dhcp

na:

Kod: Zaznacz cały

allow-hotplug enp0s10
iface enp0s10 inet dhcp

i dopisz:

Kod: Zaznacz cały

allow-hotplug enp0s18
iface enp0s18 inet dhcp

Potem wykonaj (jako root): ifup enp0s10 i ifup enp0s18. Ta karta, do której masz podłączony kabel sieciowy powinna ruszyć.

[tokirium]

Tak na razie wpisałem

Kod: Zaznacz cały

# The loopback network interface
auto lo eth0 enp0s18
iface lo inet loopback

# The primary network interface
allow-hotplug eth0
iface eth0 inet dhcp
iface enp0s18 inet dhcp

I po restarcie połączył się z internetem. Dlaczego te nazwy interfejsów są inne niż klasyczne ethX, to jakaś nowość jest? Jeszcze przed zmianą płyty robiłem dist-upgrade, ale nie zaktualizowałem właściwego gruba i nie odpalał mi nowego jądra, miałem chyba dalej 4.3. Dopiero potem grub odpalił mi nowego kernela, może to dlatego?

[dedito]

Te nowe nazwy interfejsów funkcjonują chyba od jessie (bieżącej stabilnej wersji).
Być może w trakcie dist-upgrade wybrałeś niewłaściwą opcję.
Jak problem rozwiązany, proszę oznaczyć wątek.

[tokirium]

A jak tą opcję się podaje? Nie pamiętam, by coś takiego było.