Kod: Zaznacz cały
smartctl 6.4 2014-10-07 r4002 [x86_64-linux-4.0.0-kali1-amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Momentus 5400.6
Device Model: ST9500325AS
Serial Number: 5VEHJW4V
LU WWN Device Id: 5 000c50 038b8366f
Firmware Version: 0001SDM1
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Fri May 27 17:28:22 2016 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: FAILED!
Drive failure expected in less than 24 hours. SAVE ALL DATA.
See vendor-specific Attribute list for failed Attributes.
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 73) The previous self-test completed having
a test element that failed and the test
element that failed is not known.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 145) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103b) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 086 083 006 Pre-fail Always - 152099973
3 Spin_Up_Time 0x0003 098 098 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 096 096 020 Old_age Always - 4634
5 Reallocated_Sector_Ct 0x0033 005 005 036 Pre-fail Always FAILING_NOW 1963
7 Seek_Error_Rate 0x000f 086 060 030 Pre-fail Always - 410001816
9 Power_On_Hours 0x0032 079 079 000 Old_age Always - 19041
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 096 096 020 Old_age Always - 4492
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 1113
188 Command_Timeout 0x0032 100 088 000 Old_age Always - 64425492505
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 061 051 045 Old_age Always - 39 (Min/Max 25/39)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 122
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 16
193 Load_Cycle_Count 0x0032 026 026 000 Old_age Always - 149536
194 Temperature_Celsius 0x0022 039 049 000 Old_age Always - 39 (0 8 0 0 0)
195 Hardware_ECC_Recovered 0x001a 049 042 000 Old_age Always - 152099973
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 135
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 135
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 1126 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1126 occurred at disk power-on lifetime: 19030 hours (792 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 71 04 9d 00 32 e0 Device Fault; Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
a1 00 00 00 00 00 a0 00 00:04:35.169 IDENTIFY PACKET DEVICE
ec 00 00 00 00 00 a0 00 00:04:35.161 IDENTIFY DEVICE
00 00 00 00 00 00 00 04 00:04:35.005 NOP [Abort queued commands]
00 00 00 00 00 00 00 ff 00:04:33.664 NOP [Abort queued commands]
a1 00 00 00 00 00 a0 00 00:04:28.664 IDENTIFY PACKET DEVICE
Error 1125 occurred at disk power-on lifetime: 19030 hours (792 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 71 04 9d 00 32 e0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ec 00 00 00 00 00 a0 00 00:04:35.161 IDENTIFY DEVICE
00 00 00 00 00 00 00 04 00:04:35.005 NOP [Abort queued commands]
00 00 00 00 00 00 00 ff 00:04:33.664 NOP [Abort queued commands]
a1 00 00 00 00 00 a0 00 00:04:28.664 IDENTIFY PACKET DEVICE
ec 00 00 00 00 00 a0 00 00:04:28.656 IDENTIFY DEVICE
Error 1124 occurred at disk power-on lifetime: 19030 hours (792 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 71 04 9d 00 32 e0 Device Fault; Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
a1 00 00 00 00 00 a0 00 00:04:28.664 IDENTIFY PACKET DEVICE
ec 00 00 00 00 00 a0 00 00:04:28.656 IDENTIFY DEVICE
00 00 00 00 00 00 00 04 00:04:28.500 NOP [Abort queued commands]
00 00 00 00 00 00 00 ff 00:04:27.160 NOP [Abort queued commands]
a1 00 00 00 00 00 a0 00 00:04:27.120 IDENTIFY PACKET DEVICE
Error 1123 occurred at disk power-on lifetime: 19030 hours (792 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 71 04 9d 00 32 e0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ec 00 00 00 00 00 a0 00 00:04:28.656 IDENTIFY DEVICE
00 00 00 00 00 00 00 04 00:04:28.500 NOP [Abort queued commands]
00 00 00 00 00 00 00 ff 00:04:27.160 NOP [Abort queued commands]
a1 00 00 00 00 00 a0 00 00:04:27.120 IDENTIFY PACKET DEVICE
ec 00 00 00 00 00 a0 00 00:04:27.088 IDENTIFY DEVICE
Error 1122 occurred at disk power-on lifetime: 19030 hours (792 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 71 04 9d 00 32 e0 Device Fault; Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
a1 00 00 00 00 00 a0 00 00:04:27.120 IDENTIFY PACKET DEVICE
ec 00 00 00 00 00 a0 00 00:04:27.088 IDENTIFY DEVICE
25 00 00 ff ff ff ef 00 00:04:08.748 READ DMA EXT
25 00 e0 ff ff ff ef 00 00:04:08.747 READ DMA EXT
25 00 10 ff ff ff ef 00 00:04:08.734 READ DMA EXT
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Conveyance offline Completed: unknown failure 90% 19041 0
# 2 Extended offline Completed: unknown failure 90% 19041 0
# 3 Short offline Completed: unknown failure 90% 19041 0
# 4 Conveyance offline Completed without error 00% 18549 -
# 5 Short offline Completed without error 00% 18549 -
# 6 Short offline Completed without error 00% 0 -
# 7 Conveyance offline Completed without error 00% 0 -
# 8 Short offline Completed without error 00% 0 -
# 9 Short offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Kod: Zaznacz cały
5 Reallocated_Sector_Ct 0x0033 005 005 036 Pre-fail Always FAILING_NOW 1963
