Strona 2 z 3 PierwszyPierwszy 123 OstatniOstatni
Pokaż wyniki od 11 do 20 z 23

Temat: [+] Instalacja sterowników do karty graficznej Ati radeon mobily hd 5470

  1. #11
    uname -a dodalem wyzej

    Kod:
    jacek@debian:~$ lspci -k
    00:00.0 Host bridge: Advanced Micro Devices [AMD] RS880 Host Bridge
        Subsystem: ASUSTeK Computer Inc. Device 1bf2
    00:02.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (ext gfx port 0)
        Kernel driver in use: pcieport
    00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0)
        Kernel driver in use: pcieport
    00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1)
        Kernel driver in use: pcieport
    00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode]
        Subsystem: ASUSTeK Computer Inc. Device 1313
        Kernel driver in use: ahci
    00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
        Subsystem: ASUSTeK Computer Inc. Device 1313
        Kernel driver in use: ohci_hcd
    00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
        Subsystem: ASUSTeK Computer Inc. Device 1313
        Kernel driver in use: ehci_hcd
    00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
        Subsystem: ASUSTeK Computer Inc. Device 1313
        Kernel driver in use: ohci_hcd
    00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
        Subsystem: ASUSTeK Computer Inc. Device 1313
        Kernel driver in use: ehci_hcd
    00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 41)
    00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40)
        Subsystem: ASUSTeK Computer Inc. Device 11b3
        Kernel driver in use: HDA Intel
    00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller (rev 40)
        Subsystem: ASUSTeK Computer Inc. Device 1313
    00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (rev 40)
    00:16.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
        Subsystem: ASUSTeK Computer Inc. Device 1313
        Kernel driver in use: ohci_hcd
    00:16.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
        Subsystem: ASUSTeK Computer Inc. Device 1313
        Kernel driver in use: ehci_hcd
    00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration
    00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map
    00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller
    00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control
        Kernel driver in use: k10temp
    00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control
    01:00.0 VGA compatible controller: ATI Technologies Inc Manhattan [Mobility Radeon HD 5000 Series]
        Subsystem: ASUSTeK Computer Inc. Device 1bf2
        Kernel driver in use: fglrx_pci
    01:00.1 Audio device: ATI Technologies Inc Manhattan HDMI Audio [Mobility Radeon HD 5000 Series]
        Subsystem: ASUSTeK Computer Inc. Device 1bf2
        Kernel driver in use: HDA Intel
    04:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
        Subsystem: AzureWave Device 1089
        Kernel driver in use: ath9k
    05:00.0 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 80)
        Subsystem: ASUSTeK Computer Inc. Device 1a07
        Kernel driver in use: sdhci-pci
    05:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 80)
        Subsystem: ASUSTeK Computer Inc. Device 1a07
    05:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 80)
        Subsystem: ASUSTeK Computer Inc. Device 1a07
        Kernel driver in use: jmb38x_ms
    05:00.4 System peripheral: JMicron Technology Corp. xD Host Controller (rev 80)
        Subsystem: ASUSTeK Computer Inc. Device 1a07
    05:00.5 Ethernet controller: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 03)
        Subsystem: ASUSTeK Computer Inc. Device 1905
        Kernel driver in use: jme
    Kod:
    jacek@debian:~$ lspci -n
    00:00.0 0600: 1022:9601
    00:02.0 0604: 1022:9603
    00:04.0 0604: 1022:9604
    00:05.0 0604: 1022:9605
    00:11.0 0106: 1002:4391
    00:12.0 0c03: 1002:4397
    00:12.2 0c03: 1002:4396
    00:13.0 0c03: 1002:4397
    00:13.2 0c03: 1002:4396
    00:14.0 0c05: 1002:4385 (rev 41)
    00:14.2 0403: 1002:4383 (rev 40)
    00:14.3 0601: 1002:439d (rev 40)
    00:14.4 0604: 1002:4384 (rev 40)
    00:16.0 0c03: 1002:4397
    00:16.2 0c03: 1002:4396
    00:18.0 0600: 1022:1200
    00:18.1 0600: 1022:1201
    00:18.2 0600: 1022:1202
    00:18.3 0600: 1022:1203
    00:18.4 0600: 1022:1204
    01:00.0 0300: 1002:68e0
    01:00.1 0403: 1002:aa68
    04:00.0 0280: 168c:002b (rev 01)
    05:00.0 0880: 197b:2382 (rev 80)
    05:00.2 0805: 197b:2381 (rev 80)
    05:00.3 0880: 197b:2383 (rev 80)
    05:00.4 0880: 197b:2384 (rev 80)
    05:00.5 0200: 197b:0250 (rev 03)
    Ostatnio edytowane przez Rafal_F ; 30-03-2013 o 15:56

  2. #12
    Wyniki poszczególnych poleceń nie bardzo się ze sobą zgadzają.

    Zainstaluj pakiet:
    Kod:
    firmware-linux-nonfree
    Zrestartuj komputer i wklej tu ponownie wyniki:
    Kod:
    dmesg
    i log xorga.
    Ostatnio edytowane przez fnmirk ; 19-04-2013 o 08:12

  3. #13
    dmesg:
    Kod:
    jacek@debian:~$ dmesg
    [    0.000000] Initializing cgroup subsys cpuset
    [    0.000000] Initializing cgroup subsys cpu
    [    0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-48squeeze1) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Feb 25 00:26:11 UTC 2013
    [    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=6f88e713-0363-42db-8f86-048dff96ce68 ro quiet
    [    0.000000] KERNEL supported cpus:
    [    0.000000]   Intel GenuineIntel
    [    0.000000]   AMD AuthenticAMD
    [    0.000000]   Centaur CentaurHauls
    [    0.000000] BIOS-provided physical RAM map:
    [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
    [    0.000000]  BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
    [    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    [    0.000000]  BIOS-e820: 0000000000100000 - 00000000afcc8000 (usable)
    [    0.000000]  BIOS-e820: 00000000afcc8000 - 00000000afd10000 (ACPI NVS)
    [    0.000000]  BIOS-e820: 00000000afd10000 - 00000000afd1d000 (ACPI data)
    [    0.000000]  BIOS-e820: 00000000afd1d000 - 00000000afd2e000 (reserved)
    [    0.000000]  BIOS-e820: 00000000afd2e000 - 00000000afd36000 (ACPI NVS)
    [    0.000000]  BIOS-e820: 00000000afd36000 - 00000000afd46000 (reserved)
    [    0.000000]  BIOS-e820: 00000000afd46000 - 00000000afd47000 (usable)
    [    0.000000]  BIOS-e820: 00000000afd47000 - 00000000afd49000 (reserved)
    [    0.000000]  BIOS-e820: 00000000afd49000 - 00000000afd4a000 (ACPI NVS)
    [    0.000000]  BIOS-e820: 00000000afd4a000 - 00000000afd4d000 (reserved)
    [    0.000000]  BIOS-e820: 00000000afd4d000 - 00000000afd53000 (ACPI NVS)
    [    0.000000]  BIOS-e820: 00000000afd53000 - 00000000afd73000 (reserved)
    [    0.000000]  BIOS-e820: 00000000afd73000 - 00000000afd74000 (ACPI NVS)
    [    0.000000]  BIOS-e820: 00000000afd74000 - 00000000afd89000 (reserved)
    [    0.000000]  BIOS-e820: 00000000afd89000 - 00000000afd90000 (ACPI NVS)
    [    0.000000]  BIOS-e820: 00000000afd90000 - 00000000aff00000 (usable)
    [    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed01000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fed61000 - 00000000fed71000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fed80000 - 00000000fed90000 (reserved)
    [    0.000000]  BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
    [    0.000000]  BIOS-e820: 0000000100001000 - 0000000150000000 (usable)
    [    0.000000] DMI 2.6 present.
    [    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
    [    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [    0.000000] last_pfn = 0x150000 max_arch_pfn = 0x400000000
    [    0.000000] MTRR default type: uncachable
    [    0.000000] MTRR fixed ranges enabled:
    [    0.000000]   00000-9FFFF write-back
    [    0.000000]   A0000-BFFFF write-through
    [    0.000000]   C0000-CEFFF write-protect
    [    0.000000]   CF000-E7FFF uncachable
    [    0.000000]   E8000-FFFFF write-protect
    [    0.000000] MTRR variable ranges enabled:
    [    0.000000]   0 base 000000000000 mask FFFF00000000 write-back
    [    0.000000]   1 base 0000AFF00000 mask FFFFFFF00000 uncachable
    [    0.000000]   2 base 0000B0000000 mask FFFFF0000000 uncachable
    [    0.000000]   3 base 0000C0000000 mask FFFFC0000000 uncachable
    [    0.000000]   4 disabled
    [    0.000000]   5 disabled
    [    0.000000]   6 disabled
    [    0.000000]   7 disabled
    [    0.000000] TOM2: 0000000150000000 aka 5376M
    [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [    0.000000] e820 update range: 00000000aff00000 - 0000000100000000 (usable) ==> (reserved)
    [    0.000000] last_pfn = 0xaff00 max_arch_pfn = 0x400000000
    [    0.000000] initial memory mapped : 0 - 20000000
    [    0.000000] Using GB pages for direct mapping
    [    0.000000] init_memory_mapping: 0000000000000000-00000000aff00000
    [    0.000000]  0000000000 - 0080000000 page 1G
    [    0.000000]  0080000000 - 00afe00000 page 2M
    [    0.000000]  00afe00000 - 00aff00000 page 4k
    [    0.000000] kernel direct mapping tables up to aff00000 @ 10000-13000
    [    0.000000] init_memory_mapping: 0000000100000000-0000000150000000
    [    0.000000]  0100000000 - 0140000000 page 1G
    [    0.000000]  0140000000 - 0150000000 page 2M
    [    0.000000] kernel direct mapping tables up to 150000000 @ 12000-14000
    [    0.000000] RAMDISK: 376f3000 - 37fef259
    [    0.000000] ACPI: RSDP 00000000000f0410 00024 (v03 _ASUS_)
    [    0.000000] ACPI: XSDT 00000000afd10080 00054 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
    [    0.000000] ACPI: FACP 00000000afd1cb38 000F4 (v04 _ASUS_ Notebook 01072009 AMI  00010013)
    [    0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20090903/tbfadt-369)
    [    0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - AFD4DF40/00000000AFD4DF80, using 32 (20090903/tbfadt-486)
    [    0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0000000000000000/1 (20090903/tbfadt-557)
    [    0.000000] ACPI: DSDT 00000000afd10168 0C9CE (v02 _ASUS_ Notebook 00000000 INTL 20051117)
    [    0.000000] ACPI: FACS 00000000afd4df40 00040
    [    0.000000] ACPI: APIC 00000000afd1cc30 00072 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
    [    0.000000] ACPI: ECDT 00000000afd1cca8 000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000003)
    [    0.000000] ACPI: MCFG 00000000afd1cd70 0003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
    [    0.000000] ACPI: SSDT 00000000afd1cdb0 001B7 (v01 AMD    POWERNOW 00000001 AMD  00000001)
    [    0.000000] ACPI: HPET 00000000afd1cf68 00038 (v01 _ASUS_ Notebook 01072009 AMI  00000003)
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] Scanning NUMA topology in Northbridge 24
    [    0.000000] No NUMA configuration found
    [    0.000000] Faking a node at 0000000000000000-0000000150000000
    [    0.000000] Bootmem setup node 0 0000000000000000-0000000150000000
    [    0.000000]   NODE_DATA [0000000000013000 - 000000000001afff]
    [    0.000000]   bootmap [000000000001b000 -  0000000000044fff] pages 2a
    [    0.000000] (8 early reservations) ==> bootmem [0000000000 - 0150000000]
    [    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
    [    0.000000]   #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
    [    0.000000]   #2 [0001000000 - 00016db584]    TEXT DATA BSS ==> [0001000000 - 00016db584]
    [    0.000000]   #3 [00376f3000 - 0037fef259]          RAMDISK ==> [00376f3000 - 0037fef259]
    [    0.000000]   #4 [000009ec00 - 0000100000]    BIOS reserved ==> [000009ec00 - 0000100000]
    [    0.000000]   #5 [00016dc000 - 00016dc22d]              BRK ==> [00016dc000 - 00016dc22d]
    [    0.000000]   #6 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]
    [    0.000000]   #7 [0000012000 - 0000013000]          PGTABLE ==> [0000012000 - 0000013000]
    [    0.000000]  [ffffea0000000000-ffffea00049fffff] PMD -> [ffff880001800000-ffff8800051fffff] on node 0
    [    0.000000] Zone PFN ranges:
    [    0.000000]   DMA      0x00000010 -> 0x00001000
    [    0.000000]   DMA32    0x00001000 -> 0x00100000
    [    0.000000]   Normal   0x00100000 -> 0x00150000
    [    0.000000] Movable zone start PFN for each node
    [    0.000000] early_node_map[5] active PFN ranges
    [    0.000000]     0: 0x00000010 -> 0x0000009e
    [    0.000000]     0: 0x00000100 -> 0x000afcc8
    [    0.000000]     0: 0x000afd46 -> 0x000afd47
    [    0.000000]     0: 0x000afd90 -> 0x000aff00
    [    0.000000]     0: 0x00100001 -> 0x00150000
    [    0.000000] On node 0 totalpages: 1048006
    [    0.000000]   DMA zone: 56 pages used for memmap
    [    0.000000]   DMA zone: 103 pages reserved
    [    0.000000]   DMA zone: 3823 pages, LIFO batch:0
    [    0.000000]   DMA32 zone: 14280 pages used for memmap
    [    0.000000]   DMA32 zone: 702065 pages, LIFO batch:31
    [    0.000000]   Normal zone: 4480 pages used for memmap
    [    0.000000]   Normal zone: 323199 pages, LIFO batch:31
    [    0.000000] ACPI: PM-Timer IO Port: 0x808
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
    [    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
    [    0.000000] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    [    0.000000] ACPI: IRQ0 used by override.
    [    0.000000] ACPI: IRQ2 used by override.
    [    0.000000] ACPI: IRQ9 used by override.
    [    0.000000] Using ACPI (MADT) for SMP configuration information
    [    0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
    [    0.000000] SMP: Allowing 4 CPUs, 3 hotplug CPUs
    [    0.000000] nr_irqs_gsi: 24
    [    0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
    [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    [    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [    0.000000] PM: Registered nosave memory: 00000000afcc8000 - 00000000afd10000
    [    0.000000] PM: Registered nosave memory: 00000000afd10000 - 00000000afd1d000
    [    0.000000] PM: Registered nosave memory: 00000000afd1d000 - 00000000afd2e000
    [    0.000000] PM: Registered nosave memory: 00000000afd2e000 - 00000000afd36000
    [    0.000000] PM: Registered nosave memory: 00000000afd36000 - 00000000afd46000
    [    0.000000] PM: Registered nosave memory: 00000000afd47000 - 00000000afd49000
    [    0.000000] PM: Registered nosave memory: 00000000afd49000 - 00000000afd4a000
    [    0.000000] PM: Registered nosave memory: 00000000afd4a000 - 00000000afd4d000
    [    0.000000] PM: Registered nosave memory: 00000000afd4d000 - 00000000afd53000
    [    0.000000] PM: Registered nosave memory: 00000000afd53000 - 00000000afd73000
    [    0.000000] PM: Registered nosave memory: 00000000afd73000 - 00000000afd74000
    [    0.000000] PM: Registered nosave memory: 00000000afd74000 - 00000000afd89000
    [    0.000000] PM: Registered nosave memory: 00000000afd89000 - 00000000afd90000
    [    0.000000] PM: Registered nosave memory: 00000000aff00000 - 00000000fec00000
    [    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
    [    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
    [    0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000
    [    0.000000] PM: Registered nosave memory: 00000000fed01000 - 00000000fed61000
    [    0.000000] PM: Registered nosave memory: 00000000fed61000 - 00000000fed71000
    [    0.000000] PM: Registered nosave memory: 00000000fed71000 - 00000000fed80000
    [    0.000000] PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000
    [    0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000ff800000
    [    0.000000] PM: Registered nosave memory: 00000000ff800000 - 0000000100000000
    [    0.000000] PM: Registered nosave memory: 0000000100000000 - 0000000100001000
    [    0.000000] Allocating PCI resources starting at aff00000 (gap: aff00000:4ed00000)
    [    0.000000] Booting paravirtualized kernel on bare hardware
    [    0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
    [    0.000000] PERCPU: Embedded 30 pages/cpu @ffff880005400000 s90392 r8192 d24296 u524288
    [    0.000000] pcpu-alloc: s90392 r8192 d24296 u524288 alloc=1*2097152
    [    0.000000] pcpu-alloc: [0] 0 1 2 3 
    [    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1029087
    [    0.000000] Policy zone: Normal
    [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=6f88e713-0363-42db-8f86-048dff96ce68 ro quiet
    [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [    0.000000] Initializing CPU#0
    [    0.000000] Checking aperture...
    [    0.000000] No AGP bridge found
    [    0.000000] Node 0: aperture @ faea000000 size 32 MB
    [    0.000000] Aperture beyond 4GB. Ignoring.
    [    0.000000] Your BIOS doesn't leave a aperture memory hole
    [    0.000000] Please enable the IOMMU option in the BIOS setup
    [    0.000000] This costs you 64 MB of RAM
    [    0.000000] Mapping aperture over 65536 KB of RAM @ 20000000
    [    0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000
    [    0.000000] Memory: 4049960k/5505024k available (3087k kernel code, 1313000k absent, 142064k reserved, 2053k data, 592k init)
    [    0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [    0.000000] Hierarchical RCU implementation.
    [    0.000000] NR_IRQS:4352 nr_irqs:440
    [    0.000000] Extended CMOS year: 2000
    [    0.000000] spurious 8259A interrupt: IRQ7.
    [    0.000000] Console: colour VGA+ 80x25
    [    0.000000] console [tty0] enabled
    [    0.000000] hpet clockevent registered
    [    0.000000] Fast TSC calibration using PIT
    [    0.000000] Detected 2194.721 MHz processor.
    [    0.008004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.43 BogoMIPS (lpj=8778872)
    [    0.008020] Security Framework initialized
    [    0.008024] SELinux:  Disabled at boot.
    [    0.008294] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [    0.013209] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [    0.013759] Mount-cache hash table entries: 256
    [    0.013865] Initializing cgroup subsys ns
    [    0.013868] Initializing cgroup subsys cpuacct
    [    0.013871] Initializing cgroup subsys devices
    [    0.013874] Initializing cgroup subsys freezer
    [    0.013875] Initializing cgroup subsys net_cls
    [    0.013894] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    [    0.013897] CPU: L2 Cache: 512K (64 bytes/line)
    [    0.013899] CPU 0/0x0 -> Node 0
    [    0.013902] tseg: 00aff00000
    [    0.013904] mce: CPU supports 6 MCE banks
    [    0.013913] using C1E aware idle routine
    [    0.013915] Performance Events: AMD PMU driver.
    [    0.013919] ... version:                0
    [    0.013920] ... bit width:              48
    [    0.013921] ... generic registers:      4
    [    0.013923] ... value mask:             0000ffffffffffff
    [    0.013925] ... max period:             00007fffffffffff
    [    0.013926] ... fixed-purpose events:   0
    [    0.013927] ... event mask:             000000000000000f
    [    0.013937] SMP alternatives: switching to UP code
    [    0.017790] ACPI: Core revision 20090903
    [    0.032055] Setting APIC routing to flat
    [    0.032342] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [    0.073572] CPU0: AMD V120 Processor stepping 03
    [    0.076001] Brought up 1 CPUs
    [    0.076001] Total of 1 processors activated (4389.43 BogoMIPS).
    [    0.076001] CPU0 attaching NULL sched-domain.
    [    0.076001] devtmpfs: initialized
    [    0.076001] regulator: core version 0.5
    [    0.076001] NET: Registered protocol family 16
    [    0.076001] node 0 link 0: io port [d000, ffff]
    [    0.076001] TOM: 00000000b0000000 aka 2816M
    [    0.076001] Fam 10h mmconf [0xe0000000-0xefffffff]
    [    0.076001] node 0 link 0: mmio [a0000, bffff]
    [    0.076001] node 0 link 0: mmio [b0000000, dfffffff]
    [    0.076001] node 0 link 0: mmio [e0000000, efffffff] ==> none
    [    0.076001] node 0 link 0: mmio [f0000000, ff7fffff]
    [    0.076001] TOM2: 0000000150000000 aka 5376M
    [    0.076001] bus: [00,ff] on node 0 link 0
    [    0.076001] bus: 00 index 0 io port: [0, ffff]
    [    0.076001] bus: 00 index 1 mmio: [a0000, bffff]
    [    0.076001] bus: 00 index 2 mmio: [b0000000, dfffffff]
    [    0.076001] bus: 00 index 3 mmio: [f0000000, ffffffff]
    [    0.076001] bus: 00 index 4 mmio: [150000000, fcffffffff]
    [    0.076001] bus: [00,06] on node 0 link 0
    [    0.076001] ACPI: bus type pci registered
    [    0.076001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
    [    0.076001] PCI: Not using MMCONFIG.
    [    0.076001] PCI: Using configuration type 1 for base access
    [    0.076001] PCI: Using configuration type 1 for extended access
    [    0.076001] bio: create slab <bio-0> at 0
    [    0.076483] ACPI: EC: EC description table is found, configuring boot EC
    [    0.077654] ACPI: Executed 2 blocks of module-level executable AML code
    [    0.081183] ACPI: BIOS _OSI(Linux) query ignored
    [    0.089276] ACPI: Interpreter enabled
    [    0.089279] ACPI: (supports S0 S3 S4 S5)
    [    0.089302] ACPI: Using IOAPIC for interrupt routing
    [    0.089871] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
    [    0.089984] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
    [    0.103607] PCI: Using MMCONFIG at e0000000 - efffffff
    [    0.116415] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
    [    0.116698] ACPI: No dock devices found.
    [    0.117081] ACPI: PCI Root Bridge [PCI0] (0000:00)
    [    0.117197] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
    [    0.117200] pci 0000:00:02.0: PME# disabled
    [    0.117244] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
    [    0.117247] pci 0000:00:04.0: PME# disabled
    [    0.117286] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
    [    0.117289] pci 0000:00:05.0: PME# disabled
    [    0.117344] pci 0000:00:11.0: reg 10 io port: [0xf090-0xf097]
    [    0.117350] pci 0000:00:11.0: reg 14 io port: [0xf080-0xf083]
    [    0.117356] pci 0000:00:11.0: reg 18 io port: [0xf070-0xf077]
    [    0.117362] pci 0000:00:11.0: reg 1c io port: [0xf060-0xf063]
    [    0.117368] pci 0000:00:11.0: reg 20 io port: [0xf050-0xf05f]
    [    0.117375] pci 0000:00:11.0: reg 24 32bit mmio: [0xfeb0a000-0xfeb0a3ff]
    [    0.117444] pci 0000:00:12.0: reg 10 32bit mmio: [0xfeb09000-0xfeb09fff]
    [    0.117510] pci 0000:00:12.2: reg 10 32bit mmio: [0xfeb08000-0xfeb080ff]
    [    0.117568] pci 0000:00:12.2: supports D1 D2
    [    0.117569] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
    [    0.117573] pci 0000:00:12.2: PME# disabled
    [    0.117601] pci 0000:00:13.0: reg 10 32bit mmio: [0xfeb07000-0xfeb07fff]
    [    0.117667] pci 0000:00:13.2: reg 10 32bit mmio: [0xfeb06000-0xfeb060ff]
    [    0.117724] pci 0000:00:13.2: supports D1 D2
    [    0.117726] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
    [    0.117730] pci 0000:00:13.2: PME# disabled
    [    0.117819] pci 0000:00:14.2: reg 10 64bit mmio: [0xfeb00000-0xfeb03fff]
    [    0.117864] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
    [    0.117868] pci 0000:00:14.2: PME# disabled
    [    0.117971] pci 0000:00:16.0: reg 10 32bit mmio: [0xfeb05000-0xfeb05fff]
    [    0.118037] pci 0000:00:16.2: reg 10 32bit mmio: [0xfeb04000-0xfeb040ff]
    [    0.118094] pci 0000:00:16.2: supports D1 D2
    [    0.118096] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
    [    0.118099] pci 0000:00:16.2: PME# disabled
    [    0.118183] PCI: peer root bus 00 res updated from pci conf
    [    0.118210] pci 0000:01:00.0: reg 10 64bit mmio pref: [0xd0000000-0xdfffffff]
    [    0.118218] pci 0000:01:00.0: reg 18 64bit mmio: [0xfdf20000-0xfdf3ffff]
    [    0.118223] pci 0000:01:00.0: reg 20 io port: [0xe000-0xe0ff]
    [    0.118231] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfdf00000-0xfdf1ffff]
    [    0.118260] pci 0000:01:00.0: supports D1 D2
    [    0.118289] pci 0000:01:00.1: reg 10 64bit mmio: [0xfdf40000-0xfdf43fff]
    [    0.118332] pci 0000:01:00.1: supports D1 D2
    [    0.118384] System has AMD C1E enabled
    [    0.118393] Switch to broadcast mode on CPU0
    [    0.124082] pci 0000:00:02.0: bridge io port: [0xe000-0xefff]
    [    0.124086] pci 0000:00:02.0: bridge 32bit mmio: [0xfdf00000-0xfe8fffff]
    [    0.124090] pci 0000:00:02.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
    [    0.124133] pci 0000:04:00.0: reg 10 64bit mmio: [0xfea00000-0xfea0ffff]
    [    0.124196] pci 0000:04:00.0: supports D1
    [    0.124197] pci 0000:04:00.0: PME# supported from D0 D1 D3hot D3cold
    [    0.124201] pci 0000:04:00.0: PME# disabled
    [    0.132090] pci 0000:00:04.0: bridge 32bit mmio: [0xfea00000-0xfeafffff]
    [    0.132133] pci 0000:05:00.0: reg 10 32bit mmio: [0xfe907000-0xfe9070ff]
    [    0.132257] pci 0000:05:00.2: reg 10 32bit mmio: [0xfe906000-0xfe9060ff]
    [    0.132381] pci 0000:05:00.3: reg 10 32bit mmio: [0xfe905000-0xfe9050ff]
    [    0.132500] pci 0000:05:00.4: reg 10 32bit mmio: [0xfe904000-0xfe9040ff]
    [    0.132618] pci 0000:05:00.5: reg 10 32bit mmio: [0xfe900000-0xfe903fff]
    [    0.132631] pci 0000:05:00.5: reg 18 io port: [0xd100-0xd17f]
    [    0.132638] pci 0000:05:00.5: reg 1c io port: [0xd000-0xd0ff]
    [    0.132709] pci 0000:05:00.5: PME# supported from D0 D3hot D3cold
    [    0.132713] pci 0000:05:00.5: PME# disabled
    [    0.140117] pci 0000:00:05.0: bridge io port: [0xd000-0xdfff]
    [    0.140121] pci 0000:00:05.0: bridge 32bit mmio: [0xfe900000-0xfe9fffff]
    [    0.140178] pci 0000:00:14.4: transparent bridge
    [    0.140211] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [    0.140505] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
    [    0.140624] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
    [    0.140715] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT]
    [    0.148603] ACPI: PCI Interrupt Link [LN24] (IRQs *24)
    [    0.148780] ACPI: PCI Interrupt Link [LN25] (IRQs *25)
    [    0.148956] ACPI: PCI Interrupt Link [LN26] (IRQs *26)
    [    0.149131] ACPI: PCI Interrupt Link [LN27] (IRQs *27)
    [    0.149306] ACPI: PCI Interrupt Link [LN28] (IRQs *28)
    [    0.149481] ACPI: PCI Interrupt Link [LN29] (IRQs *29)
    [    0.149656] ACPI: PCI Interrupt Link [LN30] (IRQs *30)
    [    0.149831] ACPI: PCI Interrupt Link [LN31] (IRQs *31)
    [    0.150006] ACPI: PCI Interrupt Link [LN32] (IRQs *32)
    [    0.150181] ACPI: PCI Interrupt Link [LN33] (IRQs *33)
    [    0.150356] ACPI: PCI Interrupt Link [LN34] (IRQs *34)
    [    0.150531] ACPI: PCI Interrupt Link [LN35] (IRQs *35)
    [    0.150706] ACPI: PCI Interrupt Link [LN36] (IRQs *36)
    [    0.150882] ACPI: PCI Interrupt Link [LN37] (IRQs *37)
    [    0.151058] ACPI: PCI Interrupt Link [LN38] (IRQs *38)
    [    0.151233] ACPI: PCI Interrupt Link [LN39] (IRQs *39)
    [    0.151409] ACPI: PCI Interrupt Link [LN40] (IRQs *40)
    [    0.151584] ACPI: PCI Interrupt Link [LN41] (IRQs *41)
    [    0.151760] ACPI: PCI Interrupt Link [LN42] (IRQs *42)
    [    0.151938] ACPI: PCI Interrupt Link [LN43] (IRQs *43)
    [    0.152124] ACPI: PCI Interrupt Link [LN44] (IRQs *44)
    [    0.152299] ACPI: PCI Interrupt Link [LN45] (IRQs *45)
    [    0.152475] ACPI: PCI Interrupt Link [LN46] (IRQs *46)
    [    0.152650] ACPI: PCI Interrupt Link [LN47] (IRQs *47)
    [    0.152825] ACPI: PCI Interrupt Link [LN48] (IRQs *48)
    [    0.153001] ACPI: PCI Interrupt Link [LN49] (IRQs *49)
    [    0.153177] ACPI: PCI Interrupt Link [LN50] (IRQs *50)
    [    0.153352] ACPI: PCI Interrupt Link [LN51] (IRQs *51)
    [    0.153528] ACPI: PCI Interrupt Link [LN52] (IRQs *52)
    [    0.153704] ACPI: PCI Interrupt Link [LN53] (IRQs *53)
    [    0.153881] ACPI: PCI Interrupt Link [LN54] (IRQs *54)
    [    0.154057] ACPI: PCI Interrupt Link [LN55] (IRQs *55)
    [    0.154266] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
    [    0.154522] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
    [    0.154786] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
    [    0.155052] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
    [    0.155299] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
    [    0.155479] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
    [    0.155659] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
    [    0.155847] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
    [    0.155965] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [    0.155970] vgaarb: loaded
    [    0.156038] PCI: Using ACPI for IRQ routing
    [    0.156193] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [    0.156197] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
    [    0.158224] Switching to clocksource tsc
    [    0.159005] pnp: PnP ACPI init
    [    0.159020] ACPI: bus type pnp registered
    [    0.161086] pnp: PnP ACPI: found 14 devices
    [    0.161088] ACPI: ACPI bus type pnp unregistered
    [    0.161097] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
    [    0.161104] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
    [    0.161107] system 00:03: ioport range 0x40b-0x40b has been reserved
    [    0.161109] system 00:03: ioport range 0x4d6-0x4d6 has been reserved
    [    0.161112] system 00:03: ioport range 0xc00-0xc01 has been reserved
    [    0.161114] system 00:03: ioport range 0xc14-0xc14 has been reserved
    [    0.161116] system 00:03: ioport range 0xc50-0xc51 has been reserved
    [    0.161119] system 00:03: ioport range 0xc52-0xc52 has been reserved
    [    0.161121] system 00:03: ioport range 0xc6c-0xc6c has been reserved
    [    0.161123] system 00:03: ioport range 0xc6f-0xc6f has been reserved
    [    0.161126] system 00:03: ioport range 0xcd0-0xcd1 has been reserved
    [    0.161128] system 00:03: ioport range 0xcd2-0xcd3 has been reserved
    [    0.161131] system 00:03: ioport range 0xcd4-0xcd5 has been reserved
    [    0.161133] system 00:03: ioport range 0xcd6-0xcd7 has been reserved
    [    0.161136] system 00:03: ioport range 0xcd8-0xcdf has been reserved
    [    0.161138] system 00:03: ioport range 0x800-0x89f has been reserved
    [    0.161141] system 00:03: ioport range 0x900-0x90f has been reserved
    [    0.161143] system 00:03: ioport range 0x910-0x91f has been reserved
    [    0.161146] system 00:03: ioport range 0xfe00-0xfefe has been reserved
    [    0.161149] system 00:03: iomem range 0xfec00000-0xfec00fff could not be reserved
    [    0.161152] system 00:03: iomem range 0xfee00000-0xfee00fff has been reserved
    [    0.161155] system 00:03: iomem range 0xfed80000-0xfed8ffff has been reserved
    [    0.161158] system 00:03: iomem range 0xfed61000-0xfed70fff has been reserved
    [    0.161160] system 00:03: iomem range 0xfec10000-0xfec10fff has been reserved
    [    0.161163] system 00:03: iomem range 0xfed00000-0xfed00fff has been reserved
    [    0.161166] system 00:03: iomem range 0xff800000-0xffffffff has been reserved
    [    0.161171] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
    [    0.161177] system 00:0a: ioport range 0x240-0x259 has been reserved
    [    0.165901] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
    [    0.165904] pci 0000:00:02.0:   IO window: 0xe000-0xefff
    [    0.165907] pci 0000:00:02.0:   MEM window: 0xfdf00000-0xfe8fffff
    [    0.165910] pci 0000:00:02.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
    [    0.165914] pci 0000:00:04.0: PCI bridge, secondary bus 0000:04
    [    0.165916] pci 0000:00:04.0:   IO window: disabled
    [    0.165919] pci 0000:00:04.0:   MEM window: 0xfea00000-0xfeafffff
    [    0.165921] pci 0000:00:04.0:   PREFETCH window: disabled
    [    0.165925] pci 0000:00:05.0: PCI bridge, secondary bus 0000:05
    [    0.165928] pci 0000:00:05.0:   IO window: 0xd000-0xdfff
    [    0.165930] pci 0000:00:05.0:   MEM window: 0xfe900000-0xfe9fffff
    [    0.165933] pci 0000:00:05.0:   PREFETCH window: disabled
    [    0.165936] pci 0000:00:14.4: PCI bridge, secondary bus 0000:06
    [    0.165938] pci 0000:00:14.4:   IO window: disabled
    [    0.165942] pci 0000:00:14.4:   MEM window: disabled
    [    0.165946] pci 0000:00:14.4:   PREFETCH window: disabled
    [    0.165959]   alloc irq_desc for 18 on node 0
    [    0.165960]   alloc kstat_irqs on node 0
    [    0.165965] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [    0.165969] pci 0000:00:02.0: setting latency timer to 64
    [    0.165974]   alloc irq_desc for 16 on node 0
    [    0.165975]   alloc kstat_irqs on node 0
    [    0.165978] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    0.165981] pci 0000:00:04.0: setting latency timer to 64
    [    0.165986]   alloc irq_desc for 17 on node 0
    [    0.165987]   alloc kstat_irqs on node 0
    [    0.165990] pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [    0.165993] pci 0000:00:05.0: setting latency timer to 64
    [    0.166000] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
    [    0.166002] pci_bus 0000:00: resource 1 mem: [0x0a0000-0x0bffff]
    [    0.166004] pci_bus 0000:00: resource 2 mem: [0xb0000000-0xdfffffff]
    [    0.166007] pci_bus 0000:00: resource 3 mem: [0xf0000000-0xffffffff]
    [    0.166009] pci_bus 0000:00: resource 4 mem: [0x150000000-0xfcffffffff]
    [    0.166011] pci_bus 0000:01: resource 0 io:  [0xe000-0xefff]
    [    0.166013] pci_bus 0000:01: resource 1 mem: [0xfdf00000-0xfe8fffff]
    [    0.166015] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
    [    0.166018] pci_bus 0000:04: resource 1 mem: [0xfea00000-0xfeafffff]
    [    0.166020] pci_bus 0000:05: resource 0 io:  [0xd000-0xdfff]
    [    0.166022] pci_bus 0000:05: resource 1 mem: [0xfe900000-0xfe9fffff]
    [    0.166025] pci_bus 0000:06: resource 3 io:  [0x00-0xffff]
    [    0.166026] pci_bus 0000:06: resource 4 mem: [0x0a0000-0x0bffff]
    [    0.166029] pci_bus 0000:06: resource 5 mem: [0xb0000000-0xdfffffff]
    [    0.166031] pci_bus 0000:06: resource 6 mem: [0xf0000000-0xffffffff]
    [    0.166033] pci_bus 0000:06: resource 7 mem: [0x150000000-0xfcffffffff]
    [    0.166061] NET: Registered protocol family 2
    [    0.166189] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [    0.167100] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [    0.169502] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [    0.169815] TCP: Hash tables configured (established 524288 bind 65536)
    [    0.169817] TCP reno registered
    [    0.169890] NET: Registered protocol family 1
    [    0.169919] pci 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [    0.217817] pci 0000:00:12.0: PCI INT A disabled
    [    0.217835] pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [    0.217861] pci 0000:00:12.2: PCI INT B disabled
    [    0.217866] pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [    0.217879] pci 0000:00:13.0: PCI INT A disabled
    [    0.217887] pci 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [    0.217902] pci 0000:00:13.2: PCI INT B disabled
    [    0.217910] pci 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [    0.217923] pci 0000:00:16.0: PCI INT A disabled
    [    0.217931] pci 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [    0.217944] pci 0000:00:16.2: PCI INT B disabled
    [    0.217955] pci 0000:01:00.0: Boot video device
    [    0.218006] Unpacking initramfs...
    [    0.409849] Freeing initrd memory: 9200k freed
    [    0.412876] PCI-DMA: Disabling AGP.
    [    0.412942] PCI-DMA: aperture base @ 20000000 size 65536 KB
    [    0.412943] PCI-DMA: using GART IOMMU.
    [    0.412946] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
    [    0.413665] audit: initializing netlink socket (disabled)
    [    0.413674] type=2000 audit(1364664488.409:1): initialized
    [    0.416637] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [    0.417697] VFS: Disk quotas dquot_6.5.2
    [    0.417740] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [    0.417821] msgmni has been set to 7928
    [    0.417953] alg: No test for stdrng (krng)
    [    0.417991] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [    0.417993] io scheduler noop registered
    [    0.417995] io scheduler anticipatory registered
    [    0.417996] io scheduler deadline registered
    [    0.418046] io scheduler cfq registered (default)
    [    0.418147]   alloc irq_desc for 24 on node 0
    [    0.418149]   alloc kstat_irqs on node 0
    [    0.418156] pcieport 0000:00:02.0: irq 24 for MSI/MSI-X
    [    0.418161] pcieport 0000:00:02.0: setting latency timer to 64
    [    0.418240]   alloc irq_desc for 25 on node 0
    [    0.418241]   alloc kstat_irqs on node 0
    [    0.418245] pcieport 0000:00:04.0: irq 25 for MSI/MSI-X
    [    0.418249] pcieport 0000:00:04.0: setting latency timer to 64
    [    0.418324]   alloc irq_desc for 26 on node 0
    [    0.418325]   alloc kstat_irqs on node 0
    [    0.418329] pcieport 0000:00:05.0: irq 26 for MSI/MSI-X
    [    0.418333] pcieport 0000:00:05.0: setting latency timer to 64
    [    0.419481] Linux agpgart interface v0.103
    [    0.419516] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
    [    0.419872] input: Macintosh mouse button emulation as /devices/virtual/input/input0
    [    0.419916] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
    [    0.423041] i8042.c: Detected active multiplexing controller, rev 1.1.
    [    0.425502] serio: i8042 KBD port at 0x60,0x64 irq 1
    [    0.425507] serio: i8042 AUX0 port at 0x60,0x64 irq 12
    [    0.425528] serio: i8042 AUX1 port at 0x60,0x64 irq 12
    [    0.425543] serio: i8042 AUX2 port at 0x60,0x64 irq 12
    [    0.425558] serio: i8042 AUX3 port at 0x60,0x64 irq 12
    [    0.425635] mice: PS/2 mouse device common for all mice
    [    0.425678] rtc_cmos 00:05: RTC can wake from S4
    [    0.425708] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    [    0.425746] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [    0.425755] cpuidle: using governor ladder
    [    0.425757] cpuidle: using governor menu
    [    0.425761] No iBFT detected.
    [    0.426030] TCP cubic registered
    [    0.426122] NET: Registered protocol family 10
    [    0.426724] Mobile IPv6
    [    0.426726] NET: Registered protocol family 17
    [    0.426791] PM: Resume from disk failed.
    [    0.426799] registered taskstats version 1
    [    0.427258] rtc_cmos 00:05: setting system clock to 2013-03-30 17:28:09 UTC (1364664489)
    [    0.427330] Initalizing network drop monitor service
    [    0.427353] Freeing unused kernel memory: 592k freed
    [    0.427490] Write protecting the kernel read-only data: 4252k
    [    0.445808] udev[77]: starting version 164
    [    0.463689] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
    [    0.695587] usbcore: registered new interface driver usbfs
    [    0.695687] usbcore: registered new interface driver hub
    [    0.695781] usbcore: registered new device driver usb
    [    0.701002] jme: JMicron JMC2XX ethernet driver version 1.0.5
    [    0.706903] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    0.707271] SCSI subsystem initialized
    [    0.707297] jme 0000:05:00.5: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [    0.707306] jme 0000:05:00.5: setting latency timer to 64
    [    0.707937] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [    0.707949] ehci_hcd 0000:00:12.2: EHCI Host Controller
    [    0.707970] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
    [    0.707982] ehci_hcd 0000:00:12.2: QUIRK: Enable exception for AMD Hudson ASPM
    [    0.708006] ehci_hcd 0000:00:12.2: debug port 1
    [    0.708028] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfeb08000
    [    0.708441] eth0: JMC250 Gigabit Ethernet ver:23 rev:3 macaddr:20:cf:30:48:79:e2
    [    0.722366] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
    [    0.722399] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
    [    0.722402] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    0.722404] usb usb1: Product: EHCI Host Controller
    [    0.722406] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
    [    0.722407] usb usb1: SerialNumber: 0000:00:12.2
    [    0.722552] usb usb1: configuration #1 chosen from 1 choice
    [    0.722598] hub 1-0:1.0: USB hub found
    [    0.722606] hub 1-0:1.0: 5 ports detected
    [    0.722994] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [    0.723023] ehci_hcd 0000:00:13.2: EHCI Host Controller
    [    0.723034] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
    [    0.723047] ehci_hcd 0000:00:13.2: QUIRK: Enable exception for AMD Hudson ASPM
    [    0.723067] ehci_hcd 0000:00:13.2: debug port 1
    [    0.723102] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfeb06000
    [    0.726123] sdhci: Secure Digital Host Controller Interface driver
    [    0.726126] sdhci: Copyright(c) Pierre Ossman
    [    0.728175] sdhci-pci 0000:05:00.0: SDHCI controller found [197b:2382] (rev 80)
    [    0.728602] ACPI Warning for \_TZ_.THRM._PSL: Return Package has no elements (empty) (20090903/nspredef-433)
    [    0.728608] ACPI: [Package] has zero elements (ffff88014c216dc0)
    [    0.728687] ACPI: Invalid passive threshold
    [    0.729239] sdhci-pci 0000:05:00.0: PCI INT B -> GSI 18 (level, low) -> IRQ 18
    [    0.729281] sdhci-pci 0000:05:00.0: setting latency timer to 64
    [    0.729613] thermal LNXTHERM:01: registered as thermal_zone0
    [    0.729621] ACPI: Thermal Zone [THRM] (67 C)
    [    0.730114] Registered led device: mmc0::
    [    0.730186] mmc0: SDHCI controller on PCI [0000:05:00.0] using ADMA
    [    0.730224] libata version 3.00 loaded.
    [    0.733114] sdhci-pci 0000:05:00.2: SDHCI controller found [197b:2381] (rev 80)
    [    0.733132] sdhci-pci 0000:05:00.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18
    [    0.733139] sdhci-pci 0000:05:00.2: Refusing to bind to secondary interface.
    [    0.733144] sdhci-pci 0000:05:00.2: PCI INT B disabled
    [    0.733751] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
    [    0.733785] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
    [    0.733787] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    0.733789] usb usb2: Product: EHCI Host Controller
    [    0.733791] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
    [    0.733793] usb usb2: SerialNumber: 0000:00:13.2
    [    0.733866] usb usb2: configuration #1 chosen from 1 choice
    [    0.733891] hub 2-0:1.0: USB hub found
    [    0.733898] hub 2-0:1.0: 5 ports detected
    [    0.735081] ahci 0000:00:11.0: version 3.0
    [    0.735128]   alloc irq_desc for 19 on node 0
    [    0.735130]   alloc kstat_irqs on node 0
    [    0.735137] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    [    0.735184]   alloc irq_desc for 27 on node 0
    [    0.735185]   alloc kstat_irqs on node 0
    [    0.735195] ahci 0000:00:11.0: irq 27 for MSI/MSI-X
    [    0.735271] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0xf impl SATA mode
    [    0.735275] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
    [    0.735506] scsi0 : ahci
    [    0.735679] scsi1 : ahci
    [    0.735743] scsi2 : ahci
    [    0.735804] scsi3 : ahci
    [    0.735874] ata1: SATA max UDMA/133 abar m1024@0xfeb0a000 port 0xfeb0a100 irq 27
    [    0.735877] ata2: SATA max UDMA/133 abar m1024@0xfeb0a000 port 0xfeb0a180 irq 27
    [    0.735880] ata3: SATA max UDMA/133 abar m1024@0xfeb0a000 port 0xfeb0a200 irq 27
    [    0.735883] ata4: SATA max UDMA/133 abar m1024@0xfeb0a000 port 0xfeb0a280 irq 27
    [    0.736180] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [    0.736205] ehci_hcd 0000:00:16.2: EHCI Host Controller
    [    0.736217] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
    [    0.736229] ehci_hcd 0000:00:16.2: QUIRK: Enable exception for AMD Hudson ASPM
    [    0.736250] ehci_hcd 0000:00:16.2: debug port 1
    [    0.736264] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfeb04000
    [    0.746916] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
    [    0.746940] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
    [    0.746943] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    0.746945] usb usb3: Product: EHCI Host Controller
    [    0.746946] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
    [    0.746948] usb usb3: SerialNumber: 0000:00:16.2
    [    0.747026] usb usb3: configuration #1 chosen from 1 choice
    [    0.747051] hub 3-0:1.0: USB hub found
    [    0.747057] hub 3-0:1.0: 4 ports detected
    [    0.788217] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    0.788301] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [    0.788331] ohci_hcd 0000:00:12.0: OHCI Host Controller
    [    0.788344] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
    [    0.788367] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb09000
    [    0.845764] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
    [    0.845768] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    0.845771] usb usb4: Product: OHCI Host Controller
    [    0.845773] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
    [    0.845774] usb usb4: SerialNumber: 0000:00:12.0
    [    0.845922] usb usb4: configuration #1 chosen from 1 choice
    [    0.845972] hub 4-0:1.0: USB hub found
    [    0.846017] hub 4-0:1.0: 5 ports detected
    [    0.846113] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [    0.846138] ohci_hcd 0000:00:13.0: OHCI Host Controller
    [    0.846147] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
    [    0.846166] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb07000
    [    0.905866] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
    [    0.905869] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    0.905871] usb usb5: Product: OHCI Host Controller
    [    0.905873] usb usb5: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
    [    0.905874] usb usb5: SerialNumber: 0000:00:13.0
    [    0.906010] usb usb5: configuration #1 chosen from 1 choice
    [    0.906053] hub 5-0:1.0: USB hub found
    [    0.906097] hub 5-0:1.0: 5 ports detected
    [    0.906192] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [    0.906217] ohci_hcd 0000:00:16.0: OHCI Host Controller
    [    0.906225] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 6
    [    0.906244] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfeb05000
    [    0.965738] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
    [    0.965741] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    0.965744] usb usb6: Product: OHCI Host Controller
    [    0.965745] usb usb6: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
    [    0.965747] usb usb6: SerialNumber: 0000:00:16.0
    [    0.965898] usb usb6: configuration #1 chosen from 1 choice
    [    0.965940] hub 6-0:1.0: USB hub found
    [    0.965953] hub 6-0:1.0: 4 ports detected
    [    1.040091] ata4: SATA link down (SStatus 0 SControl 300)
    [    1.040119] ata3: SATA link down (SStatus 0 SControl 300)
    [    1.064058] usb 2-2: new high speed USB device using ehci_hcd and address 2
    [    1.204050] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [    1.204076] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [    1.205600] ata1.00: ATA-8: WDC WD3200BEVT-80A0RT0, 01.01A01, max UDMA/133
    [    1.205604] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [    1.207269] ata1.00: configured for UDMA/133
    [    1.218198] ata2.00: ATAPI: Optiarc DVD RW AD-7580S, FX20, max UDMA/100
    [    1.220125] scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200BEVT-8 01.0 PQ: 0 ANSI: 5
    [    1.231796] ata2.00: configured for UDMA/100
    [    1.235159] usb 2-2: New USB device found, idVendor=13d3, idProduct=5130
    [    1.235163] usb 2-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0
    [    1.235165] usb 2-2: Product: USB 2.0 Camera
    [    1.235167] usb 2-2: Manufacturer: Sonix Technology Co., Ltd.
    [    1.235247] usb 2-2: configuration #1 chosen from 1 choice
    [    1.250454] scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7580S  FX20 PQ: 0 ANSI: 5
    [    1.274684] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
    [    1.274720] sd 0:0:0:0: [sda] Write Protect is off
    [    1.274723] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    1.274737] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    1.274832]  sda:sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [    1.284529] Uniform CD-ROM driver Revision: 3.20
    [    1.284620] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [    1.307347]  sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
    [    1.358770] sd 0:0:0:0: [sda] Attached SCSI disk
    [    1.365313] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [    1.365562] sr 1:0:0:0: Attached scsi generic sg1 type 5
    [    1.384081] usb 4-1: new low speed USB device using ohci_hcd and address 2
    [    1.553761] usb 4-1: New USB device found, idVendor=045e, idProduct=076c
    [    1.553766] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    [    1.553768] usb 4-1: Product: Microsoft® Comfort Mouse 4500
    [    1.553770] usb 4-1: Manufacturer: Microsoft
    [    1.553925] usb 4-1: configuration #1 chosen from 1 choice
    [    1.566168] usbcore: registered new interface driver hiddev
    [    1.579327] input: Microsoft Microsoft® Comfort Mouse 4500 as /devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.0/input/input2
    [    1.579436] generic-usb 0003:045E:076C.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft® Comfort Mouse 4500] on usb-0000:00:12.0-1/input0
    [    1.579456] usbcore: registered new interface driver usbhid
    [    1.579573] usbhid: v2.6:USB HID core driver
    [    2.090526] PM: Starting manual resume from disk
    [    2.090530] PM: Resume from partition 8:7
    [    2.090531] PM: Checking hibernation image.
    [    2.101589] PM: Error -22 checking image file
    [    2.101592] PM: Resume from disk failed.
    [    2.119864] EXT4-fs (sda6): INFO: recovery required on readonly filesystem
    [    2.119868] EXT4-fs (sda6): write access will be enabled during recovery
    [    3.962301] EXT4-fs (sda6): recovery complete
    [    3.962966] EXT4-fs (sda6): mounted filesystem with ordered data mode
    [    6.321786] udev[471]: starting version 164
    [    6.618781] ACPI: processor limited to max C-state 1
    [    6.618809] processor LNXCPU:00: registered as cooling_device0
    [    6.629985] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
    [    6.629991] ACPI: Power Button [PWRB]
    [    6.630045] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
    [    6.635447] ACPI: Lid Switch [LID]
    [    6.635526] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
    [    6.635569] ACPI: Sleep Button [SLPB]
    [    6.635614] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
    [    6.635617] ACPI: Power Button [PWRF]
    [    6.774861] asus_laptop: Asus Laptop Support version 0.42
    [    6.794523] ACPI: AC Adapter [AC0] (on-line)
    [    6.806571] asus_laptop: BSTS called, 0xfb7f returned
    [    6.819313] input: Asus Laptop extra buttons as /devices/virtual/input/input7
    [    6.823847] asus_laptop: Brightness ignored, must be controlled by ACPI video driver
    [    6.931166] ACPI: Battery Slot [BAT0] (battery present)
    [    6.958422] input: PC Speaker as /devices/platform/pcspkr/input/input8
    [    7.068288] cfg80211: Using static regulatory domain info
    [    7.068291] cfg80211: Regulatory domain: US
    [    7.068293]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [    7.068296]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
    [    7.068298]     (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
    [    7.068301]     (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
    [    7.068303]     (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
    [    7.068305]     (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
    [    7.068307]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
    [    7.068525] cfg80211: Calling CRDA for country: US
    [    7.137570] ACPI Warning: _BQC returned an invalid level (20090903/video-631)
    [    7.144059] acpi device:3f: registered as cooling_device1
    [    7.144572] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:3c/LNXVIDEO:00/input/input9
    [    7.144634] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
    [    7.622516] elantech.c: assuming hardware version 2, firmware version 4.1.2
    [    7.658698] elantech.c: Synaptics capabilities query result 0x78, 0x16, 0x0d.
    [    7.767602] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input10
    [    8.634418] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
    [    8.634423] Disabling lock debugging due to kernel taint
    [    8.700432] [fglrx] Maximum main memory to use for locked dma buffers: 3802 MBytes.
    [    8.700571] [fglrx]   vendor: 1002 device: 68e0 count: 1
    [    8.700813] [fglrx] ioport: bar 4, base 0xe000, size: 0x100
    [    8.700829] pci 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [    8.700834] pci 0000:01:00.0: setting latency timer to 64
    [    8.700976] [fglrx] Kernel PAT support is enabled
    [    8.700996] [fglrx] module loaded - fglrx 8.77.5 [Aug 25 2010] with 1 minors
    [    8.706489] EDAC MC: Ver: 2.1.0 Feb 24 2013
    [    8.708147] jmb38x_ms 0000:05:00.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18
    [    8.708154] jmb38x_ms 0000:05:00.3: setting latency timer to 64
    [    8.817446] EDAC amd64_edac:  Ver: 3.2.0 Feb 24 2013
    [    8.817499] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
    [    8.817503] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
    [    8.817504]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
    [    8.817506]  (Note that use of the override may cause unknown side effects.)
    [    8.817517] amd64_edac: probe of 0000:00:18.2 failed with error -22
    [    8.886843] ACPI: I/O resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SBSM [0xb00-0xb0f]
    [    8.886889] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [    9.047091] Linux video capture interface: v2.00
    [    9.065310] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (13d3:5130)
    [    9.072547] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:13.2/usb2/2-2/2-2:1.0/input/input11
    [    9.072610] usbcore: registered new interface driver uvcvideo
    [    9.072766] USB Video Class driver (v0.1.0)
    [    9.088511] ath9k 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    9.088520] ath9k 0000:04:00.0: setting latency timer to 64
    [    9.137538] ath: EEPROM regdomain: 0x60
    [    9.137540] ath: EEPROM indicates we should expect a direct regpair map
    [    9.137543] ath: Country alpha2 being used: 00
    [    9.137545] ath: Regpair used: 0x60
    [    9.276445] phy0: Selected rate control algorithm 'ath9k_rate_control'
    [    9.276980] Registered led device: ath9k-phy0::radio
    [    9.276992] Registered led device: ath9k-phy0::assoc
    [    9.277004] Registered led device: ath9k-phy0::tx
    [    9.277015] Registered led device: ath9k-phy0::rx
    [    9.277037] phy0: Atheros AR9285 MAC/BB Rev:2 AR5133 RF Rev:e0: mem=0xffffc900111c0000, irq=16
    [    9.514402] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [   10.194724] hda_codec: ALC269: BIOS auto-probing.
    [   10.195254] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input12
    [   10.198172] HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [   10.198223] HDA Intel 0000:01:00.1: setting latency timer to 64
    [   11.094013] Adding 4191224k swap on /dev/sda7.  Priority:-1 extents:1 across:4191224k 
    [   11.313824] loop: module loaded
    [   12.431988] fuse init (API version 7.13)
    [   12.757845] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [   13.889625] wlan0: direct probe to AP 00:1d:7e:90:b9:f6 (try 1)
    [   13.892472] wlan0: direct probe responded
    [   13.892476] wlan0: authenticate with AP 00:1d:7e:90:b9:f6 (try 1)
    [   13.894409] wlan0: authenticated
    [   13.894428] wlan0: associate with AP 00:1d:7e:90:b9:f6 (try 1)
    [   13.897338] wlan0: RX AssocResp from 00:1d:7e:90:b9:f6 (capab=0x401 status=0 aid=1)
    [   13.897342] wlan0: associated
    [   13.897944] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [   14.474207] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input13
    [   17.252500] Bluetooth: Core ver 2.15
    [   17.252550] NET: Registered protocol family 31
    [   17.252552] Bluetooth: HCI device and connection manager initialized
    [   17.252555] Bluetooth: HCI socket layer initialized
    [   17.418202] Bluetooth: L2CAP ver 2.14
    [   17.418204] Bluetooth: L2CAP socket layer initialized
    [   17.925949] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [   17.925952] Bluetooth: BNEP filters: protocol multicast
    [   17.985224] Bridge firewalling registered
    [   18.408513] Bluetooth: SCO (Voice Link) ver 0.6
    [   18.408517] Bluetooth: SCO socket layer initialized
    [   18.827569]   alloc irq_desc for 28 on node 0
    [   18.827572]   alloc kstat_irqs on node 0
    [   18.827583] fglrx_pci 0000:01:00.0: irq 28 for MSI/MSI-X
    [   18.828251] [fglrx] Firegl kernel thread PID: 1730
    [   18.828466] [fglrx] IRQ 28 Enabled
    [   19.341930] [fglrx] Gart USWC size:1240 M.
    [   19.341933] [fglrx] Gart cacheable size:491 M.
    [   19.341938] [fglrx] Reserved FB block: Shared offset:0, size:1000000 
    [   19.341940] [fglrx] Reserved FB block: Unshared offset:f91d000, size:3e3000 
    [   19.341943] [fglrx] Reserved FB block: Unshared offset:1fff4000, size:c000 
    [   19.714294] lp: driver loaded but no devices found
    [   19.925612] ppdev: user-space parallel port driver
    [   21.556782] powernow-k8: Found 1 AMD V120 Processor processors (1 cpu cores) (version 2.20.00)
    [   21.556824] powernow-k8:    0 : pstate 0 (2200 MHz)
    [   21.556826] powernow-k8:    1 : pstate 1 (1600 MHz)
    [   21.556828] powernow-k8:    2 : pstate 2 (800 MHz)
    [   24.644122] wlan0: no IPv6 routers present
    xorg.0.log
    Kod:
    X.Org X Server 1.7.7
    Release Date: 2010-05-04
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 3.0.0-1-amd64 x86_64 Debian
    Current Operating System: Linux debian 2.6.32-5-amd64 #1 SMP Mon Feb 25 00:26:11 UTC 2013 x86_64
    Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=6f88e713-0363-42db-8f86-048dff96ce68 ro quiet
    Build Date: 29 October 2011  06:58:14PM
    xorg-server 2:1.7.7-14 (Julien Cristau <jcristau@debian.org>) 
    Current version of pixman: 0.16.4
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar 30 17:28:25 2013
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    (==) ServerLayout "X.org Configured"
    (**) |-->Screen "aticonfig-Screen[0]-0" (0)
    (**) |   |-->Monitor "aticonfig-Monitor[0]-0"
    (**) |   |-->Device "aticonfig-Device[0]-0"
    (**) |-->Input Device "Mouse0"
    (**) |-->Input Device "Keyboard0"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
        Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
        Entry deleted from font path.
    (**) FontPath set to:
        /usr/share/fonts/X11/misc,
        /usr/share/fonts/X11/100dpi/:unscaled,
        /usr/share/fonts/X11/75dpi/:unscaled,
        /usr/share/fonts/X11/Type1,
        /usr/share/fonts/X11/100dpi,
        /usr/share/fonts/X11/75dpi,
        /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
        built-ins,
        /usr/share/fonts/X11/misc,
        /usr/share/fonts/X11/100dpi/:unscaled,
        /usr/share/fonts/X11/75dpi/:unscaled,
        /usr/share/fonts/X11/Type1,
        /usr/share/fonts/X11/100dpi,
        /usr/share/fonts/X11/75dpi,
        /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
        built-ins
    (**) ModulePath set to "/usr/lib/xorg/modules"
    (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    (WW) Disabling Mouse0
    (WW) Disabling Keyboard0
    (II) Loader magic: 0x7c8a40
    (II) Module ABI versions:
        X.Org ANSI C Emulation: 0.4
        X.Org Video Driver: 6.0
        X.Org XInput driver : 7.0
        X.Org Server Extension : 2.0
    (++) using VT number 7
    
    (--) PCI:*(0:1:0:0) 1002:68e0:1043:1bf2 ATI Technologies Inc Manhattan [Mobility Radeon HD 5000 Series] rev 0, Mem @ 0xd0000000/268435456, 0xfdf20000/131072, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "record" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    (II) Module glx: vendor="FireGL - ATI Technologies Inc."
        compiled for 7.5.0, module version = 1.0.0
    (II) Loading extension GLX
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
        compiled for 1.7.7, module version = 1.1.0
        ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
        compiled for 1.7.7, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension SELinux
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    (II) Module record: vendor="X.Org Foundation"
        compiled for 1.7.7, module version = 1.13.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
        compiled for 1.7.7, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    (II) Module dri: vendor="X.Org Foundation"
        compiled for 1.7.7, module version = 1.0.0
        ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "fglrx"
    (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
    (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
        compiled for 1.7.1, module version = 8.77.5
        Module class: X.Org Video Driver
    (II) Loading sub module "fglrxdrm"
    (II) LoadModule: "fglrxdrm"
    (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
    (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
        compiled for 1.7.1, module version = 8.77.5
    (II) ATI Proprietary Linux Driver Version Identifier:8.77.5
    (II) ATI Proprietary Linux Driver Release Identifier: 8.771                                
    (II) ATI Proprietary Linux Driver Build Date: Aug 25 2010 21:38:26
    (II) Primary Device is: PCI 01@00:00:0
    (WW) Falling back to old probe method for fglrx
    (II) Loading PCS database from /etc/ati/amdpcsdb
    (--) Chipset Supported AMD Graphics Processor (0x68E0) found
    (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
    (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
    (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
    (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
    (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
    (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
    (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
    (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
    (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
    (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:0) found
    (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:2) found
    (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
    (II) AMD Video driver is running on a device belonging to a group targeted for this release
    (II) AMD Video driver is signed
    (II) fglrx(0): pEnt->device->identifier=0x13df540
    (II) fglrx(0): === [atiddxPreInit] === begin
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/lib/xorg/modules/libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
        compiled for 1.7.7, module version = 0.1.0
        ABI class: X.Org Video Driver, version 6.0
    (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
    (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    (==) fglrx(0): Default visual is TrueColor
    (**) fglrx(0): Option "DPMS" "true"
    (==) fglrx(0): RGB weight 888
    (II) fglrx(0): Using 8 bits per RGB 
    (==) fglrx(0): Buffer Tiling is ON
    (II) Loading sub module "fglrxdrm"
    (II) LoadModule: "fglrxdrm"
    (II) Reloading /usr/lib/xorg/modules/linux/libfglrxdrm.so
    ukiDynamicMajor: found major device number 251
    ukiDynamicMajor: found major device number 251
    ukiOpenByBusid: Searching for BusID PCI:1:0:0
    ukiOpenDevice: node name is /dev/ati/card0
    ukiOpenDevice: open result is 11, (OK)
    ukiOpenByBusid: ukiOpenMinor returns 11
    ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
    (==) fglrx(0): NoAccel = NO
    (==) fglrx(0): ATI 2D Acceleration Architecture enabled
    (--) fglrx(0): Chipset: "ATI Mobility Radeon HD 5400 Series " (Chipset = 0x68e0)
    (--) fglrx(0): (PciSubVendor = 0x1043, PciSubDevice = 0x1bf2)
    (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
    (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
    (--) fglrx(0): MMIO registers at 0xfdf20000
    (--) fglrx(0): I/O port at 0x0000e000
    (==) fglrx(0): ROM-BIOS at 0x000c0000
    (II) fglrx(0): AC Adapter is used
    (II) fglrx(0): Primary V_BIOS segment is: 0xc000
    (II) Loading sub module "vbe"
    (II) LoadModule: "vbe"
    (II) Loading /usr/lib/xorg/modules/libvbe.so
    (II) Module vbe: vendor="X.Org Foundation"
        compiled for 1.7.7, module version = 1.1.0
        ABI class: X.Org Video Driver, version 6.0
    (II) fglrx(0): VESA BIOS detected
    (II) fglrx(0): VESA VBE Version 3.0
    (II) fglrx(0): VESA VBE Total Mem: 16384 kB
    (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
    (II) fglrx(0): VESA VBE OEM Software Rev: 12.20
    (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. 
    (II) fglrx(0): VESA VBE OEM Product: PARK
    (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
    (II) fglrx(0): ATI Video BIOS revision 9 or later detected
    (--) fglrx(0): Video RAM: 524288 kByte, Type: DDR3
    (II) fglrx(0): PCIE card detected
    (--) fglrx(0): Using per-process page tables (PPPT) as GART.
    (WW) fglrx(0): board is an unknown third party board, chipset is supported
    (II) fglrx(0): Using adapter: 1:0.0.
    (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000)
    (II) fglrx(0): Interrupt handler installed at IRQ 28.
    (II) fglrx(0): RandR 1.2 support is enabled!
    (II) fglrx(0): RandR 1.2 rotation support is enabled!
    (==) fglrx(0): Center Mode is disabled 
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules/libfb.so
    (II) Module fb: vendor="X.Org Foundation"
        compiled for 1.7.7, module version = 1.0.0
        ABI class: X.Org ANSI C Emulation, version 0.4
    (==) fglrx(0): Active stereo disabled
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) fglrx(0): Finished Initialize PPLIB!
    (II) fglrx(0): Output LVDS using monitor section aticonfig-Monitor[0]-0
    (II) fglrx(0): Output DFP1 has no monitor section
    (II) fglrx(0): Output CRT1 has no monitor section
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) fglrx(0): Connected Display0: LVDS
    (II) fglrx(0): Display0 EDID data ---------------------------
    (II) fglrx(0): Manufacturer: CMO  Model: 1593  Serial#: 0
    (II) fglrx(0): Year: 2010  Week: 8
    (II) fglrx(0): EDID Version: 1.3
    (II) fglrx(0): Digital Display Input
    (II) fglrx(0): Max Image Size [cm]: horiz.: 34  vert.: 19
    (II) fglrx(0): Gamma: 2.20
    (II) fglrx(0): No DPMS capabilities specified
    (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
    (II) fglrx(0): First detailed timing is preferred mode
    (II) fglrx(0): redX: 0.577 redY: 0.364   greenX: 0.348 greenY: 0.563
    (II) fglrx(0): blueX: 0.151 blueY: 0.116   whiteX: 0.313 whiteY: 0.329
    (II) fglrx(0): Manufacturer's mask: 0
    (II) fglrx(0): Supported detailed timing:
    (II) fglrx(0): clock: 69.3 MHz   Image Size:  344 x 193 mm
    (II) fglrx(0): h_active: 1366  h_sync: 1382  h_sync_end 1416 h_blank_end 1466 h_border: 0
    (II) fglrx(0): v_active: 768  v_sync: 770  v_sync_end 776 v_blanking: 788 v_border: 0
    (II) fglrx(0):  N156B3-L0B
    (II) fglrx(0):  CMO
    (II) fglrx(0):  N156B3-L0B
    (II) fglrx(0): EDID (in hex):
    (II) fglrx(0):     00ffffffffffff000daf931500000000
    (II) fglrx(0):     08140103802213780ad1f5935d599026
    (II) fglrx(0):     1d505400000001010101010101010101
    (II) fglrx(0):     010101010101121b5664500014301022
    (II) fglrx(0):     260058c110000018000000fe004e3135
    (II) fglrx(0):     3642332d4c30420a2020000000fe0043
    (II) fglrx(0):     4d4f0a202020202020202020000000fe
    (II) fglrx(0):     004e31353642332d4c30420a20200076
    (II) fglrx(0): End of Display0 EDID data --------------------
    (II) fglrx(0): EDID vendor "CMO", prod id 5523
    (II) fglrx(0): Printing DDC gathered Modelines:
    (II) fglrx(0): Modeline "1366x768"x0.0   69.30  1366 1382 1416 1466  768 770 776 788 -hsync -vsync (47.3 kHz)
    (II) fglrx(0): Output LVDS connected
    (II) fglrx(0): Output DFP1 disconnected
    (II) fglrx(0): Output CRT1 disconnected
    (II) fglrx(0): Using exact sizes for initial modes
    (II) fglrx(0): Output LVDS using initial mode 1366x768
    (II) fglrx(0): Display dimensions: (340, 190) mm
    (II) fglrx(0): DPI set to (102, 102)
    (II) fglrx(0): Adapter ATI Mobility Radeon HD 5400 Series  has 2 configurable heads and 1 displays connected.
    (==) fglrx(0):  PseudoColor visuals disabled
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (==) fglrx(0): NoDRI = NO
    (==) fglrx(0): Capabilities: 0x00000000
    (==) fglrx(0): CapabilitiesEx: 0x00000000
    (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
    (==) fglrx(0): UseFastTLS=0
    (==) fglrx(0): BlockSignalsOnLock=1
    (--) Depth 24 pixmap format is 32 bpp
    (II) Loading extension ATIFGLRXDRI
    (II) fglrx(0): doing swlDriScreenInit
    (II) fglrx(0): swlDriScreenInit for fglrx driver
    ukiDynamicMajor: found major device number 251
    ukiDynamicMajor: found major device number 251
    ukiDynamicMajor: found major device number 251
    ukiOpenByBusid: Searching for BusID PCI:1:0:0
    ukiOpenDevice: node name is /dev/ati/card0
    ukiOpenDevice: open result is 16, (OK)
    ukiOpenByBusid: ukiOpenMinor returns 16
    ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
    (II) fglrx(0): [uki] DRM interface version 1.0
    (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
    (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
    (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f05678e6000
    (II) fglrx(0): [uki] framebuffer handle = 0x3000
    (II) fglrx(0): [uki] added 1 reserved context for kernel
    (II) fglrx(0): swlDriScreenInit done
    (II) fglrx(0): Kernel Module Version Information:
    (II) fglrx(0):     Name: fglrx
    (II) fglrx(0):     Version: 8.77.5
    (II) fglrx(0):     Date: Aug 25 2010
    (II) fglrx(0):     Desc: ATI FireGL DRM kernel module
    (II) fglrx(0): Kernel Module version matches driver.
    (II) fglrx(0): Kernel Module Build Time Information:
    (II) fglrx(0):     Build-Kernel UTS_RELEASE:        2.6.32-5-amd64
    (II) fglrx(0):     Build-Kernel MODVERSIONS:        no
    (II) fglrx(0):     Build-Kernel __SMP__:            no
    (II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
    (II) fglrx(0): [uki] register handle = 0x00004000
    (II) fglrx(0): Display width adjusted to to 1664 due to alignment constraints
    (II) fglrx(0): DRI initialization successfull
    (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x010a8000
    (II) fglrx(0): FBMM initialized for area (0,0)-(1664,2624)
    (II) fglrx(0): FBMM auto alloc for area (0,0)-(1664,1664) (front color buffer - assumption)
    (II) fglrx(0): Largest offscreen area available: 1664 x 960
    (==) fglrx(0): Backing store disabled
    (II) Loading extension FGLRXEXTENSION
    (**) fglrx(0): DPMS enabled
    (II) fglrx(0): Initialized in-driver Xinerama extension
    (**) fglrx(0): Textured Video is enabled.
    (II) LoadModule: "glesx"
    (II) Loading /usr/lib/xorg/modules/glesx.so
    (II) Module glesx: vendor="X.Org Foundation"
        compiled for 1.7.1, module version = 1.0.0
    (II) Loading extension GLESX
    (II) fglrx(0): GLESX enableFlags = 592
    (II) fglrx(0): GLESX is enabled
    (II) fglrx(0): Acceleration enabled
    (II) LoadModule: "amdxmm"
    (II) Loading /usr/lib/xorg/modules/amdxmm.so
    (II) Module amdxmm: vendor="X.Org Foundation"
        compiled for 1.7.1, module version = 1.0.0
    (II) Loading extension AMDXVOPL
    (II) fglrx(0): UVD2 feature is available
    (II) fglrx(0): Enable composite support successfully
    (WW) fglrx(0): Option "VendorName" is not used
    (WW) fglrx(0): Option "ModelName" is not used
    (II) fglrx(0): X context handle = 0x1
    (II) fglrx(0): [DRI] installation complete
    (==) fglrx(0): Silken mouse enabled
    (==) fglrx(0): Using HW cursor of display infrastructure!
    (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
    (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
    (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
    (--) RandR disabled
    (II) Initializing built-in extension Generic Event Extension
    (II) Initializing built-in extension SHAPE
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension BIG-REQUESTS
    (II) Initializing built-in extension SYNC
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-MISC
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    SELinux: Disabled on system, not enabling in X server
    ukiDynamicMajor: found major device number 251
    ukiDynamicMajor: found major device number 251
    ukiOpenByBusid: Searching for BusID PCI:1:0:0
    ukiOpenDevice: node name is /dev/ati/card0
    ukiOpenDevice: open result is 17, (OK)
    ukiOpenByBusid: ukiOpenMinor returns 17
    ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
    (II) AIGLX: Loaded and initialized /usr/lib64/dri/fglrx_dri.so
    (II) GLX: Initialized DRI GL provider for screen 0
    (II) fglrx(0): Enable the clock gating!
    (II) fglrx(0): Setting screen physical size to 361 x 203
    (II) config/udev: Adding input device Power Button (/dev/input/event6)
    (**) Power Button: Applying InputClass "evdev keyboard catchall"
    (II) LoadModule: "evdev"
    (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    (II) Module evdev: vendor="X.Org Foundation"
        compiled for 1.7.6.901, module version = 2.3.2
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 7.0
    (**) Power Button: always reports core events
    (**) Power Button: Device: "/dev/input/event6"
    (II) Power Button: Found keys
    (II) Power Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "pc105"
    (**) Option "xkb_layout" "pl"
    (II) config/udev: Adding input device Video Bus (/dev/input/event9)
    (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    (**) Video Bus: always reports core events
    (**) Video Bus: Device: "/dev/input/event9"
    (II) Video Bus: Found keys
    (II) Video Bus: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "pc105"
    (**) Option "xkb_layout" "pl"
    (II) config/udev: Adding input device Power Button (/dev/input/event3)
    (**) Power Button: Applying InputClass "evdev keyboard catchall"
    (**) Power Button: always reports core events
    (**) Power Button: Device: "/dev/input/event3"
    (II) Power Button: Found keys
    (II) Power Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "pc105"
    (**) Option "xkb_layout" "pl"
    (II) config/udev: Adding input device Lid Switch (/dev/input/event4)
    (II) No input driver/identifier specified (ignoring)
    (II) config/udev: Adding input device Sleep Button (/dev/input/event5)
    (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    (**) Sleep Button: always reports core events
    (**) Sleep Button: Device: "/dev/input/event5"
    (II) Sleep Button: Found keys
    (II) Sleep Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "pc105"
    (**) Option "xkb_layout" "pl"
    (II) config/udev: Adding input device Microsoft Microsoft® Comfort Mouse 4500 (/dev/input/event2)
    (**) Microsoft Microsoft® Comfort Mouse 4500: Applying InputClass "evdev pointer catchall"
    (**) Microsoft Microsoft® Comfort Mouse 4500: Applying InputClass "evdev keyboard catchall"
    (**) Microsoft Microsoft® Comfort Mouse 4500: always reports core events
    (**) Microsoft Microsoft® Comfort Mouse 4500: Device: "/dev/input/event2"
    (II) Microsoft Microsoft® Comfort Mouse 4500: Found 9 mouse buttons
    (II) Microsoft Microsoft® Comfort Mouse 4500: Found scroll wheel(s)
    (II) Microsoft Microsoft® Comfort Mouse 4500: Found relative axes
    (II) Microsoft Microsoft® Comfort Mouse 4500: Found x and y relative axes
    (II) Microsoft Microsoft® Comfort Mouse 4500: Found absolute axes
    (II) Microsoft Microsoft® Comfort Mouse 4500: Found keys
    (II) Microsoft Microsoft® Comfort Mouse 4500: Configuring as mouse
    (II) Microsoft Microsoft® Comfort Mouse 4500: Configuring as keyboard
    (**) Microsoft Microsoft® Comfort Mouse 4500: YAxisMapping: buttons 4 and 5
    (**) Microsoft Microsoft® Comfort Mouse 4500: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Microsoft Microsoft® Comfort Mouse 4500" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "pc105"
    (**) Option "xkb_layout" "pl"
    (II) Microsoft Microsoft® Comfort Mouse 4500: initialized for relative axes.
    (WW) Microsoft Microsoft® Comfort Mouse 4500: ignoring absolute axes.
    (II) config/udev: Adding input device Microsoft Microsoft® Comfort Mouse 4500 (/dev/input/mouse1)
    (II) No input driver/identifier specified (ignoring)
    (II) config/udev: Adding input device USB 2.0 Camera (/dev/input/event11)
    (**) USB 2.0 Camera: Applying InputClass "evdev keyboard catchall"
    (**) USB 2.0 Camera: always reports core events
    (**) USB 2.0 Camera: Device: "/dev/input/event11"
    (II) USB 2.0 Camera: Found keys
    (II) USB 2.0 Camera: Configuring as keyboard
    (II) XINPUT: Adding extended input device "USB 2.0 Camera" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "pc105"
    (**) Option "xkb_layout" "pl"
    (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event12)
    (II) No input driver/identifier specified (ignoring)
    (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event1)
    (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    (**) AT Translated Set 2 keyboard: always reports core events
    (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
    (II) AT Translated Set 2 keyboard: Found keys
    (II) AT Translated Set 2 keyboard: Configuring as keyboard
    (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "pc105"
    (**) Option "xkb_layout" "pl"
    (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event10)
    (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
    (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
    (II) LoadModule: "synaptics"
    (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    (II) Module synaptics: vendor="X.Org Foundation"
        compiled for 1.7.6.901, module version = 1.2.2
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 7.0
    (II) Synaptics touchpad driver version 1.2.2
    (**) Option "Device" "/dev/input/event10"
    (II) ETPS/2 Elantech Touchpad: x-axis range 8 - 1144
    (II) ETPS/2 Elantech Touchpad: y-axis range 8 - 760
    (II) ETPS/2 Elantech Touchpad: device does not report pressure, will use touch data.
    (II) ETPS/2 Elantech Touchpad: finger width range 0 - 0
    (II) ETPS/2 Elantech Touchpad: buttons: left right middle double triple
    (--) ETPS/2 Elantech Touchpad: touchpad found
    (**) ETPS/2 Elantech Touchpad: always reports core events
    (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD)
    (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
    (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 0
    (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
    (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
    (--) ETPS/2 Elantech Touchpad: touchpad found
    (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse2)
    (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
    (II) Synaptics touchpad driver version 1.2.2
    ETPS/2 Elantech Touchpad no synaptics event device found
    (**) Option "Device" "/dev/input/mouse2"
    Query no Synaptics: 6003C8
    (--) ETPS/2 Elantech Touchpad: no supported touchpad found
    (EE) ETPS/2 Elantech Touchpad Unable to query/initialize Synaptics hardware.
    (EE) PreInit failed for input device "ETPS/2 Elantech Touchpad"
    (II) UnloadModule: "synaptics"
    (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
    (II) No input driver/identifier specified (ignoring)
    (II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/event0)
    (**) Macintosh mouse button emulation: Applying InputClass "evdev pointer catchall"
    (**) Macintosh mouse button emulation: always reports core events
    (**) Macintosh mouse button emulation: Device: "/dev/input/event0"
    (II) Macintosh mouse button emulation: Found 3 mouse buttons
    (II) Macintosh mouse button emulation: Found relative axes
    (II) Macintosh mouse button emulation: Found x and y relative axes
    (II) Macintosh mouse button emulation: Configuring as mouse
    (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
    (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
    (II) Macintosh mouse button emulation: initialized for relative axes.
    (II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/mouse0)
    (II) No input driver/identifier specified (ignoring)
    (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event13)
    (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
    (**) ACPI Virtual Keyboard Device: always reports core events
    (**) ACPI Virtual Keyboard Device: Device: "/dev/input/event13"
    (II) ACPI Virtual Keyboard Device: Found keys
    (II) ACPI Virtual Keyboard Device: Configuring as keyboard
    (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "pc105"
    (**) Option "xkb_layout" "pl"
    (II) config/udev: Adding input device Asus Laptop extra buttons (/dev/input/event7)
    (**) Asus Laptop extra buttons: Applying InputClass "evdev keyboard catchall"
    (**) Asus Laptop extra buttons: always reports core events
    (**) Asus Laptop extra buttons: Device: "/dev/input/event7"
    (II) Asus Laptop extra buttons: Found keys
    (II) Asus Laptop extra buttons: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Asus Laptop extra buttons" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "pc105"
    (**) Option "xkb_layout" "pl"
    (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments

  4. #14
    No i powinno wszystko działać:
    Cytat Napisał xorg.0.log
    (II) fglrx(0): Acceleration enabled

  5. #15
    Chyba wybrałem zły sposób instalacji tzn ten poprze sgfxi. No i tak patrzę, zaczął odinstalowywać fglrx i gdy zaczął instalować a właściwie próbował sterowniki do karty wystąpił ten sam błąd a do tego nie ładuje mi się serwer X, informuje, że jest nie włączony.

    Rafal pomóż bo już nie daję rady jak skonfigurować xorga?
    Ostatnio edytowane przez fnmirk ; 19-04-2013 o 08:13

  6. #16
    No ale przecież działało. Wklej log xorga. Najlepiej instalować metodą debiana - z repozytorium.

  7. #17
    Ciężko będzie z logiem bo nie włącza się serwer X, więc z trybu tekstowego dużo zachodu.
    W jaki sposób włączyć X serwer, bo bez tego zostaje mi jedynie tryb tekstowy?
    Ostatnio edytowane przez fnmirk ; 19-04-2013 o 08:14

  8. #18
    Najpierw trzeba się dowiedzieć co zepsułeś. Poza tym nie miesza się sposobów instalacji sterowników bo to prawie nigdy nie działa.

  9. #19
    Zapamiętam sobie. To co zostaje mi reinstalacja?

    Chyba to będzie najszybszy sposób. O matko nie ogarniam trzy dni się męczę i zamiast do przodu to jakbym się cofał.

    A tak spytam rozwiązaniem mojego wcześniejszego problemu było
    Kod:
    firmware-linux-nonfree
    Ostatnio edytowane przez fnmirk ; 19-04-2013 o 08:15

  10. #20
    Powyższe rozwiązanie jest dla sterowników otwartych. Miałeś jakieś dziwne wyniki poleceń jakbyś część wykonał przed instalacją a część po. Nie zgadzały się ze sobą.
    Co do instalacji sterowników to spróbuj tą metodą: http://wiki.debian.org/ATIProprietary . Tylko rób po kolei i czytaj komunikaty, jak w którymś momencie będzie coś nie tak to nie wklejaj dalej poleceń do konsoli tylko napisz tutaj. W razie czego zawsze można łatwo odwrócić polecenia i cofnąć zmiany.

Zakładki

Uprawnienia

  • Nie możesz zakładać nowych tematów
  • Nie możesz pisać wiadomości
  • Nie możesz dodawać załączników
  • Nie możesz edytować swoich postów
  •