Pokaż wyniki od 1 do 7 z 7

Temat: Nie uruchania się środowisko graficzne po aktualizacji - Sid

  1. #1

    Nie uruchania się środowisko graficzne po aktualizacji - Sid

    Witam.
    O
    d dłuższego czasu męczę się z niemożnością uruchomienia serwera X po aktualizacji dystrybucji. Wcześniej uruchamiało się wszystko do momentu uruchomienia kdm (więc zakładam, że xy działały), ale po próbie zalogowania serwer x się resetował (xorg.log był czysty, kdm.log mówił o niemożliwości połączenia się z serwerem D-Bus). Próbowałem walczyć z tym sam przez przeinstalowanie xów, kdm, całego kde, rekonfiguracja. Zostawiłem to jakiś tydzień albo dwa temu. Dzisiaj stwierdziłem że dosyć, Linux mi potrzebny no i spróbowałem jeszcze raz. To co zrobiłem dzisiaj:
    • Aktualizacja dystrybucji
      Kod:
      aptitude update
      aptitude full-upgrade
    • Reinstalacja x-ów, kde, kdm.
    • Próba rekonfiguracji przez:
      Kod:
      dpkg-reconfigure xserver-xorg
    • Próba rekonfiguracji przez:
      Kod:
      X -configure
    • Instalacja nvidia-xconfig i próba konfiguracji przez niego.


    Mój system to Debian Sid amd64, najświeższe jądro (dzisiaj aktualizowane). Jeśli chodzi o kartę graficzną to są dwie - zintegrowany układ intela i nvidia geForce 310M. Plik /etc/X11/xorg.conf wygenerowany przez:
    Kod:
    nvidia-xconfig
    Kod:
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig# nvidia-xconfig:  version 295.20  (pbuilder@cake)  Wed Feb 15 20:32:16 UTC 2012
    
    Section "ServerLayout"
        Identifier     "Layout0"
        Screen      0  "Screen0" 0 0
        InputDevice    "Keyboard0" "CoreKeyboard"
        InputDevice    "Mouse0" "CorePointer"
    EndSection
    
    Section "Files"
    EndSection
    
    Section "InputDevice"
        # generated from default
        Identifier     "Mouse0"
        Driver         "mouse"
        Option         "Protocol" "auto"
        Option         "Device" "/dev/psaux"
        Option         "Emulate3Buttons" "no"
        Option         "ZAxisMapping" "4 5"
    EndSection
    
    Section "InputDevice"
        # generated from default
        Identifier     "Keyboard0"
        Driver         "kbd"
    EndSection
    
    Section "Monitor"
        Identifier     "Monitor0"
        VendorName     "Unknown"
        ModelName      "Unknown"
        HorizSync       28.0 - 33.0
        VertRefresh     43.0 - 72.0
        Option         "DPMS"
    EndSection
    
    Section "Device"
        Identifier     "Device0"
        Driver         "nvidia"
        VendorName     "NVIDIA Corporation"
    EndSection
    
    Section "Screen"
        Identifier     "Screen0"
        Device         "Device0"
        Monitor        "Monitor0"
        DefaultDepth    24
        SubSection     "Display"
            Depth       24
        EndSubSection
    EndSection

    /var/log/xorg.0.log:
    Kod:
    [    14.547] X.Org X Server 1.11.4
    Release Date: 2012-01-27
    [    14.572] X Protocol Version 11, Revision 0
    [    14.572] Build Operating System: Linux 3.2.0-1-amd64 x86_64 Debian
    [    14.572] Current Operating System: Linux debian 3.2.0-2-amd64 #1 SMP Tue Mar 20 18:36:37 UTC 2012 x86_64
    [    14.572] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-2-amd64 root=UUID=c9fc0c10-439e-468f-a16d-c227e47b021b ro quiet
    [    14.572] Build Date: 04 March 2012  11:42:13PM
    [    14.572] xorg-server 2:1.11.4-1 (Cyril Brulebois <kibi@debian.org>) 
    [    14.572] Current version of pixman: 0.24.4
    [    14.572] 	Before reporting problems, check http://wiki.x.org
    	to make sure that you have the latest version.
    [    14.572] Markers: (--) probed, (**) from config file, (==) default setting,
    	(++) from command line, (!!) notice, (II) informational,
    	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [    14.573] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 30 01:16:11 2012
    [    14.627] (==) Using config file: "/etc/X11/xorg.conf"
    [    14.627] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [    14.662] (==) ServerLayout "Layout0"
    [    14.662] (**) |-->Screen "Screen0" (0)
    [    14.662] (**) |   |-->Monitor "Monitor0"
    [    14.679] (**) |   |-->Device "Device0"
    [    14.679] (**) |-->Input Device "Keyboard0"
    [    14.679] (**) |-->Input Device "Mouse0"
    [    14.679] (==) Automatically adding devices
    [    14.679] (==) Automatically enabling devices
    [    14.740] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
    [    14.740] 	Entry deleted from font path.
    [    14.740] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
    [    14.740] 	Entry deleted from font path.
    [    14.740] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
    [    14.740] 	Entry deleted from font path.
    [    14.767] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
    [    14.767] 	Entry deleted from font path.
    [    14.767] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
    [    14.767] 	Entry deleted from font path.
    [    14.798] (WW) `fonts.dir' not found (or not valid) in "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType".
    [    14.798] 	Entry deleted from font path.
    [    14.798] 	(Run 'mkfontdir' on "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType").
    [    14.798] (==) FontPath set to:
    	/usr/share/fonts/X11/misc,
    	/usr/share/fonts/X11/Type1,
    	built-ins
    [    14.798] (==) ModulePath set to "/usr/lib/xorg/modules"
    [    14.798] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [    14.798] (WW) Disabling Keyboard0
    [    14.798] (WW) Disabling Mouse0
    [    14.798] (II) Loader magic: 0x7f69908f5ae0
    [    14.798] (II) Module ABI versions:
    [    14.798] 	X.Org ANSI C Emulation: 0.4
    [    14.798] 	X.Org Video Driver: 11.0
    [    14.798] 	X.Org XInput driver : 13.0
    [    14.798] 	X.Org Server Extension : 6.0
    [    14.799] (--) PCI:*(0:0:2:0) 8086:0046:1043:1432 rev 24, Mem @ 0xd3400000/4194304, 0xb0000000/268435456, I/O @ 0x0000e080/8
    [    14.799] (--) PCI: (0:1:0:0) 10de:0a70:1043:1432 rev 162, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288
    [    14.799] (II) Open ACPI successful (/var/run/acpid.socket)
    [    14.799] (II) LoadModule: "extmod"
    [    14.883] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [    14.956] (II) Module extmod: vendor="X.Org Foundation"
    [    14.956] 	compiled for 1.11.4, module version = 1.0.0
    [    14.956] 	Module class: X.Org Server Extension
    [    14.956] 	ABI class: X.Org Server Extension, version 6.0
    [    14.956] (II) Loading extension SELinux
    [    14.956] (II) Loading extension MIT-SCREEN-SAVER
    [    14.956] (II) Loading extension XFree86-VidModeExtension
    [    14.956] (II) Loading extension XFree86-DGA
    [    14.956] (II) Loading extension DPMS
    [    14.956] (II) Loading extension XVideo
    [    14.956] (II) Loading extension XVideo-MotionCompensation
    [    14.956] (II) Loading extension X-Resource
    [    14.956] (II) LoadModule: "dbe"
    [    14.956] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [    14.962] (II) Module dbe: vendor="X.Org Foundation"
    [    14.962] 	compiled for 1.11.4, module version = 1.0.0
    [    14.962] 	Module class: X.Org Server Extension
    [    14.962] 	ABI class: X.Org Server Extension, version 6.0
    [    14.962] (II) Loading extension DOUBLE-BUFFER
    [    14.962] (II) LoadModule: "glx"
    [    14.963] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
    [    16.537] (II) Module glx: vendor="NVIDIA Corporation"
    [    16.549] 	compiled for 4.0.2, module version = 1.0.0
    [    16.549] 	Module class: X.Org Server Extension
    [    16.549] (II) NVIDIA GLX Module  295.20  Mon Feb  6 21:28:16 PST 2012
    [    16.549] (II) Loading extension GLX
    [    16.549] (II) LoadModule: "record"
    [    16.549] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [    16.556] (II) Module record: vendor="X.Org Foundation"
    [    16.556] 	compiled for 1.11.4, module version = 1.13.0
    [    16.556] 	Module class: X.Org Server Extension
    [    16.556] 	ABI class: X.Org Server Extension, version 6.0
    [    16.556] (II) Loading extension RECORD
    [    16.556] (II) LoadModule: "dri"
    [    16.556] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [    16.574] (II) Module dri: vendor="X.Org Foundation"
    [    16.574] 	compiled for 1.11.4, module version = 1.0.0
    [    16.574] 	ABI class: X.Org Server Extension, version 6.0
    [    16.574] (II) Loading extension XFree86-DRI
    [    16.574] (II) LoadModule: "dri2"
    [    16.574] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [    16.575] (II) Module dri2: vendor="X.Org Foundation"
    [    16.575] 	compiled for 1.11.4, module version = 1.2.0
    [    16.575] 	ABI class: X.Org Server Extension, version 6.0
    [    16.575] (II) Loading extension DRI2
    [    16.575] (II) LoadModule: "nvidia"
    [    16.648] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [    16.908] (II) Module nvidia: vendor="NVIDIA Corporation"
    [    16.928] 	compiled for 4.0.2, module version = 1.0.0
    [    16.928] 	Module class: X.Org Video Driver
    [    16.951] (II) NVIDIA dlloader X Driver  295.20  Mon Feb  6 21:09:10 PST 2012
    [    16.952] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [    17.004] (++) using VT number 7
    
    
    [    17.013] (EE) No devices detected.
    [    17.013] 
    Fatal server error:
    [    17.013] no screens found
    [    17.013] 
    Please consult the The X.Org Foundation support 
    	 at http://wiki.x.org
     for help. 
    [    17.013] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [    17.013]
    Co mogę z tym jeszcze zrobić?
    Ostatnio edytowane przez fnmirk ; 09-05-2012 o 23:42

  2. #2
    Kod:
    [    17.013] (EE) No devices detected. [    17.013]
    Czy zainstalowałeś sterowniki do karty graficznej?
    Ostatnio edytowane przez fnmirk ; 01-04-2012 o 22:11

  3. #3
    Zainstalowane są zarówno sterowniki intela jak i nvidii, przynajmniej według:
    Kod:
    aptitude search xserver-xorg | grep -e intel -e nvidia
    Monitor też podłączony (Linux na laptopie). Znalazłem jeszcze dzisiaj informację, że nvidia-config nie dodaje do xorg.conf linii BusID - jak dzisiaj wrócę wieczorem do domu to sprawdzę to bo faktycznie tej linii u siebie nie mam.

    Edycja:

    Dodałem do /etc/X11/xorg.conf w sekcji Device linię:
    Kod:
    BusID "1:0:0"
    To coś zmieniło - xy wydają się jakkolwiek reagować. Kończy się na tym, że mam czarny ekran (muszę się przełączyć na tekstowy terminal żeby coś zrobić, każdorazowa próba przełączenia się na środowisko kończy się kilkusekundowym zawieszeniem się systemu). Nowy /var/log/Xorg.0.log:
    Kod:
    [    14.389] 
    X.Org X Server 1.11.4
    Release Date: 2012-01-27
    [    14.461] X Protocol Version 11, Revision 0
    [    14.461] Build Operating System: Linux 3.2.0-1-amd64 x86_64 Debian
    [    14.461] Current Operating System: Linux debian 3.2.0-2-amd64 #1 SMP Tue Mar 20 18:36:37 UTC 2012 x86_64
    [    14.461] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-2-amd64 root=UUID=c9fc0c10-439e-468f-a16d-c227e47b021b ro quiet
    [    14.461] Build Date: 04 March 2012  11:42:13PM
    [    14.461] xorg-server 2:1.11.4-1 (Cyril Brulebois <kibi@debian.org>) 
    [    14.461] Current version of pixman: 0.24.4
    [    14.461] 	Before reporting problems, check http://wiki.x.org
    	to make sure that you have the latest version.
    [    14.461] Markers: (--) probed, (**) from config file, (==) default setting,
    	(++) from command line, (!!) notice, (II) informational,
    	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [    14.461] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 30 22:30:33 2012
    [    14.502] (==) Using config file: "/etc/X11/xorg.conf"
    [    14.502] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [    14.540] (==) ServerLayout "Layout0"
    [    14.540] (**) |-->Screen "Screen0" (0)
    [    14.540] (**) |   |-->Monitor "Monitor0"
    [    14.563] (**) |   |-->Device "Device0"
    [    14.563] (**) |-->Input Device "Keyboard0"
    [    14.563] (**) |-->Input Device "Mouse0"
    [    14.563] (==) Automatically adding devices
    [    14.563] (==) Automatically enabling devices
    [    14.615] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
    [    14.615] 	Entry deleted from font path.
    [    14.615] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
    [    14.615] 	Entry deleted from font path.
    [    14.615] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
    [    14.615] 	Entry deleted from font path.
    [    14.642] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
    [    14.642] 	Entry deleted from font path.
    [    14.642] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
    [    14.642] 	Entry deleted from font path.
    [    14.706] (WW) `fonts.dir' not found (or not valid) in "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType".
    [    14.706] 	Entry deleted from font path.
    [    14.706] 	(Run 'mkfontdir' on "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType").
    [    14.706] (==) FontPath set to:
    	/usr/share/fonts/X11/misc,
    	/usr/share/fonts/X11/Type1,
    	built-ins
    [    14.706] (==) ModulePath set to "/usr/lib/xorg/modules"
    [    14.706] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [    14.706] (WW) Disabling Keyboard0
    [    14.706] (WW) Disabling Mouse0
    [    14.706] (II) Loader magic: 0x7f6de8779ae0
    [    14.706] (II) Module ABI versions:
    [    14.706] 	X.Org ANSI C Emulation: 0.4
    [    14.706] 	X.Org Video Driver: 11.0
    [    14.706] 	X.Org XInput driver : 13.0
    [    14.706] 	X.Org Server Extension : 6.0
    [    14.708] (--) PCI:*(0:0:2:0) 8086:0046:1043:1432 rev 24, Mem @ 0xd3400000/4194304, 0xb0000000/268435456, I/O @ 0x0000e080/8
    [    14.708] (--) PCI: (0:1:0:0) 10de:0a70:1043:1432 rev 162, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288
    [    14.708] (II) Open ACPI successful (/var/run/acpid.socket)
    [    14.708] (II) LoadModule: "extmod"
    [    14.791] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [    14.952] (II) Module extmod: vendor="X.Org Foundation"
    [    14.952] 	compiled for 1.11.4, module version = 1.0.0
    [    14.952] 	Module class: X.Org Server Extension
    [    14.952] 	ABI class: X.Org Server Extension, version 6.0
    [    14.952] (II) Loading extension SELinux
    [    14.952] (II) Loading extension MIT-SCREEN-SAVER
    [    14.952] (II) Loading extension XFree86-VidModeExtension
    [    14.952] (II) Loading extension XFree86-DGA
    [    14.952] (II) Loading extension DPMS
    [    14.952] (II) Loading extension XVideo
    [    14.952] (II) Loading extension XVideo-MotionCompensation
    [    14.952] (II) Loading extension X-Resource
    [    14.952] (II) LoadModule: "dbe"
    [    14.952] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [    14.986] (II) Module dbe: vendor="X.Org Foundation"
    [    14.986] 	compiled for 1.11.4, module version = 1.0.0
    [    14.986] 	Module class: X.Org Server Extension
    [    14.986] 	ABI class: X.Org Server Extension, version 6.0
    [    14.986] (II) Loading extension DOUBLE-BUFFER
    [    14.986] (II) LoadModule: "glx"
    [    14.986] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
    [    16.420] (II) Module glx: vendor="NVIDIA Corporation"
    [    16.432] 	compiled for 4.0.2, module version = 1.0.0
    [    16.432] 	Module class: X.Org Server Extension
    [    16.432] (II) NVIDIA GLX Module  295.20  Mon Feb  6 21:28:16 PST 2012
    [    16.432] (II) Loading extension GLX
    [    16.432] (II) LoadModule: "record"
    [    16.432] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [    16.439] (II) Module record: vendor="X.Org Foundation"
    [    16.439] 	compiled for 1.11.4, module version = 1.13.0
    [    16.439] 	Module class: X.Org Server Extension
    [    16.439] 	ABI class: X.Org Server Extension, version 6.0
    [    16.439] (II) Loading extension RECORD
    [    16.439] (II) LoadModule: "dri"
    [    16.439] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [    16.500] (II) Module dri: vendor="X.Org Foundation"
    [    16.500] 	compiled for 1.11.4, module version = 1.0.0
    [    16.500] 	ABI class: X.Org Server Extension, version 6.0
    [    16.500] (II) Loading extension XFree86-DRI
    [    16.500] (II) LoadModule: "dri2"
    [    16.500] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [    16.501] (II) Module dri2: vendor="X.Org Foundation"
    [    16.501] 	compiled for 1.11.4, module version = 1.2.0
    [    16.501] 	ABI class: X.Org Server Extension, version 6.0
    [    16.501] (II) Loading extension DRI2
    [    16.501] (II) LoadModule: "nvidia"
    [    16.551] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [    16.890] (II) Module nvidia: vendor="NVIDIA Corporation"
    [    16.910] 	compiled for 4.0.2, module version = 1.0.0
    [    16.910] 	Module class: X.Org Video Driver
    [    16.942] (II) NVIDIA dlloader X Driver  295.20  Mon Feb  6 21:09:10 PST 2012
    [    16.942] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [    16.978] (++) using VT number 7
    
    
    [    17.010] (II) Loading sub module "fb"
    [    17.010] (II) LoadModule: "fb"
    [    17.010] (II) Loading /usr/lib/xorg/modules/libfb.so
    [    17.022] (II) Module fb: vendor="X.Org Foundation"
    [    17.022] 	compiled for 1.11.4, module version = 1.0.0
    [    17.022] 	ABI class: X.Org ANSI C Emulation, version 0.4
    [    17.022] (II) Loading sub module "wfb"
    [    17.022] (II) LoadModule: "wfb"
    [    17.046] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [    17.085] (II) Module wfb: vendor="X.Org Foundation"
    [    17.085] 	compiled for 1.11.4, module version = 1.0.0
    [    17.085] 	ABI class: X.Org ANSI C Emulation, version 0.4
    [    17.085] (II) Loading sub module "ramdac"
    [    17.085] (II) LoadModule: "ramdac"
    [    17.085] (II) Module "ramdac" already built-in
    [    17.088] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [    17.088] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [    17.088] (II) Loading /usr/lib/xorg/modules/libfb.so
    [    17.101] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    [    17.101] (==) NVIDIA(0): RGB weight 888
    [    17.101] (==) NVIDIA(0): Default visual is TrueColor
    [    17.101] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [    17.101] (**) NVIDIA(0): Enabling 2D acceleration
    [    18.636] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [    18.639] (II) NVIDIA(0): NVIDIA GPU GeForce 310M (GT218) at PCI:1:0:0 (GPU-0)
    [    18.639] (--) NVIDIA(0): Memory: 1048576 kBytes
    [    18.639] (--) NVIDIA(0): VideoBIOS: 70.18.4d.00.11
    [    18.639] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [    18.639] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
    [    18.639] (--) NVIDIA(0): Connected display device(s) on GeForce 310M at PCI:1:0:0
    [    18.639] (--) NVIDIA(0):     CRT-0
    [    18.639] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
    [    18.644] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [    18.644] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
    [    18.644] (**) NVIDIA(0):     all display devices.)
    [    18.650] (II) NVIDIA(0): Assigned Display Device: CRT-0
    [    18.650] (==) NVIDIA(0): 
    [    18.651] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
    [    18.651] (==) NVIDIA(0):     will be used as the requested mode.
    [    18.651] (==) NVIDIA(0): 
    [    18.651] (II) NVIDIA(0): Validated modes:
    [    18.651] (II) NVIDIA(0):     "nvidia-auto-select"
    [    18.651] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
    [    18.652] (WW) NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI
    [    18.652] (WW) NVIDIA(0):     from CRT-0's EDID.
    [    18.652] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
    [    18.652] (--) Depth 24 pixmap format is 32 bpp
    [    18.652] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
    [    18.661] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
    [    18.714] (II) NVIDIA(0): Built-in logo is bigger than the screen.
    [    18.714] (II) Loading extension NV-GLX
    [    18.756] (==) NVIDIA(0): Disabling shared memory pixmaps
    [    18.756] (==) NVIDIA(0): Backing store disabled
    [    18.756] (==) NVIDIA(0): Silken mouse enabled
    [    18.756] (**) NVIDIA(0): DPMS enabled
    [    18.769] (II) Loading extension NV-CONTROL
    [    18.769] (II) Loading extension XINERAMA
    [    18.769] (II) Loading sub module "dri2"
    [    18.769] (II) LoadModule: "dri2"
    [    18.770] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [    18.770] (II) Module dri2: vendor="X.Org Foundation"
    [    18.770] 	compiled for 1.11.4, module version = 1.2.0
    [    18.770] 	ABI class: X.Org Server Extension, version 6.0
    [    18.770] (II) NVIDIA(0): [DRI2] Setup complete
    [    18.770] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
    [    18.770] (==) RandR enabled
    [    18.770] (II) Initializing built-in extension Generic Event Extension
    [    18.770] (II) Initializing built-in extension SHAPE
    [    18.770] (II) Initializing built-in extension MIT-SHM
    [    18.770] (II) Initializing built-in extension XInputExtension
    [    18.770] (II) Initializing built-in extension XTEST
    [    18.770] (II) Initializing built-in extension BIG-REQUESTS
    [    18.770] (II) Initializing built-in extension SYNC
    [    18.770] (II) Initializing built-in extension XKEYBOARD
    [    18.770] (II) Initializing built-in extension XC-MISC
    [    18.770] (II) Initializing built-in extension SECURITY
    [    18.770] (II) Initializing built-in extension XINERAMA
    [    18.770] (II) Initializing built-in extension XFIXES
    [    18.770] (II) Initializing built-in extension RENDER
    [    18.770] (II) Initializing built-in extension RANDR
    [    18.770] (II) Initializing built-in extension COMPOSITE
    [    18.770] (II) Initializing built-in extension DAMAGE
    [    18.770] (II) SELinux: Disabled on system
    [    18.774] (II) Initializing extension GLX
    [    19.337] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    [    19.337] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [    19.337] (II) LoadModule: "evdev"
    [    19.364] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [    19.376] (II) Module evdev: vendor="X.Org Foundation"
    [    19.376] 	compiled for 1.11.0, module version = 2.6.0
    [    19.376] 	Module class: X.Org XInput Driver
    [    19.376] 	ABI class: X.Org XInput driver, version 13.0
    [    19.376] (II) Using input driver 'evdev' for 'Power Button'
    [    19.376] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [    19.376] (**) Power Button: always reports core events
    [    19.376] (**) Power Button: Device: "/dev/input/event3"
    [    19.377] (--) Power Button: Found keys
    [    19.377] (II) Power Button: Configuring as keyboard
    [    19.377] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
    [    19.377] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [    19.377] (**) Option "xkb_rules" "evdev"
    [    19.377] (**) Option "xkb_model" "pc105"
    [    19.377] (**) Option "xkb_layout" "pl"
    [    19.451] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
    [    19.451] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [    19.451] (II) Using input driver 'evdev' for 'Video Bus'
    [    19.451] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [    19.451] (**) Video Bus: always reports core events
    [    19.451] (**) Video Bus: Device: "/dev/input/event8"
    [    19.451] (--) Video Bus: Found keys
    [    19.451] (II) Video Bus: Configuring as keyboard
    [    19.451] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:02/input/input8/event8"
    [    19.451] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [    19.451] (**) Option "xkb_rules" "evdev"
    [    19.451] (**) Option "xkb_model" "pc105"
    [    19.451] (**) Option "xkb_layout" "pl"
    [    19.451] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
    [    19.451] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [    19.451] (II) Using input driver 'evdev' for 'Video Bus'
    [    19.451] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [    19.451] (**) Video Bus: always reports core events
    [    19.451] (**) Video Bus: Device: "/dev/input/event7"
    [    19.451] (--) Video Bus: Found keys
    [    19.451] (II) Video Bus: Configuring as keyboard
    [    19.451] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input7/event7"
    [    19.451] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
    [    19.451] (**) Option "xkb_rules" "evdev"
    [    19.451] (**) Option "xkb_model" "pc105"
    [    19.451] (**) Option "xkb_layout" "pl"
    [    19.452] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
    [    19.452] (II) No input driver specified, ignoring this device.
    [    19.452] (II) This device may have been added with another device file.
    [    19.452] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
    [    19.452] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [    19.452] (II) Using input driver 'evdev' for 'Sleep Button'
    [    19.452] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [    19.452] (**) Sleep Button: always reports core events
    [    19.452] (**) Sleep Button: Device: "/dev/input/event2"
    [    19.452] (--) Sleep Button: Found keys
    [    19.452] (II) Sleep Button: Configuring as keyboard
    [    19.452] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
    [    19.452] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
    [    19.452] (**) Option "xkb_rules" "evdev"
    [    19.452] (**) Option "xkb_model" "pc105"
    [    19.452] (**) Option "xkb_layout" "pl"
    [    19.453] (II) config/udev: Adding input device USB 2.0 Camera (/dev/input/event13)
    [    19.453] (**) USB 2.0 Camera: Applying InputClass "evdev keyboard catchall"
    [    19.453] (II) Using input driver 'evdev' for 'USB 2.0 Camera'
    [    19.453] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [    19.453] (**) USB 2.0 Camera: always reports core events
    [    19.453] (**) USB 2.0 Camera: Device: "/dev/input/event13"
    [    19.453] (--) USB 2.0 Camera: Found keys
    [    19.453] (II) USB 2.0 Camera: Configuring as keyboard
    [    19.453] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input13/event13"
    [    19.453] (II) XINPUT: Adding extended input device "USB 2.0 Camera" (type: KEYBOARD, id 10)
    [    19.453] (**) Option "xkb_rules" "evdev"
    [    19.453] (**) Option "xkb_model" "pc105"
    [    19.453] (**) Option "xkb_layout" "pl"
    [    19.453] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
    [    19.453] (II) No input driver specified, ignoring this device.
    [    19.453] (II) This device may have been added with another device file.
    [    19.454] (II) config/udev: Adding input device HDA Intel HDMI/DP,pcm=3 (/dev/input/event10)
    [    19.454] (II) No input driver specified, ignoring this device.
    [    19.454] (II) This device may have been added with another device file.
    [    19.454] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event11)
    [    19.454] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
    [    19.454] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
    [    19.454] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [    19.454] (**) Logitech USB Receiver: always reports core events
    [    19.454] (**) Logitech USB Receiver: Device: "/dev/input/event11"
    [    19.454] (--) Logitech USB Receiver: Found 20 mouse buttons
    [    19.454] (--) Logitech USB Receiver: Found scroll wheel(s)
    [    19.454] (--) Logitech USB Receiver: Found relative axes
    [    19.454] (--) Logitech USB Receiver: Found x and y relative axes
    [    19.454] (II) Logitech USB Receiver: Configuring as mouse
    [    19.454] (II) Logitech USB Receiver: Adding scrollwheel support
    [    19.454] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
    [    19.454] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [    19.454] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input11/event11"
    [    19.454] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 11)
    [    19.454] (II) Logitech USB Receiver: initialized for relative axes.
    [    19.454] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
    [    19.454] (**) Logitech USB Receiver: (accel) acceleration profile 0
    [    19.454] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
    [    19.454] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
    [    19.455] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse1)
    [    19.455] (II) No input driver specified, ignoring this device.
    [    19.455] (II) This device may have been added with another device file.
    [    19.455] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event12)
    [    19.455] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
    [    19.455] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
    [    19.455] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [    19.455] (**) Logitech USB Receiver: always reports core events
    [    19.455] (**) Logitech USB Receiver: Device: "/dev/input/event12"
    [    19.455] (--) Logitech USB Receiver: Found 1 mouse buttons
    [    19.455] (--) Logitech USB Receiver: Found scroll wheel(s)
    [    19.455] (--) Logitech USB Receiver: Found relative axes
    [    19.455] (--) Logitech USB Receiver: Found absolute axes
    [    19.455] (--) Logitech USB Receiver: Found keys
    [    19.455] (II) Logitech USB Receiver: Configuring as mouse
    [    19.455] (II) Logitech USB Receiver: Configuring as keyboard
    [    19.455] (II) Logitech USB Receiver: Adding scrollwheel support
    [    19.455] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
    [    19.455] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [    19.455] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/input/input12/event12"
    [    19.455] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 12)
    [    19.455] (**) Option "xkb_rules" "evdev"
    [    19.455] (**) Option "xkb_model" "pc105"
    [    19.455] (**) Option "xkb_layout" "pl"
    [    19.455] (EE) Logitech USB Receiver: failed to initialize for relative axes.
    [    19.456] (II) Logitech USB Receiver: initialized for absolute axes.
    [    19.456] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
    [    19.456] (**) Logitech USB Receiver: (accel) acceleration profile 0
    [    19.456] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
    [    19.456] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
    [    19.456] (II) config/udev: Adding input device Asus Laptop extra buttons (/dev/input/event5)
    [    19.456] (**) Asus Laptop extra buttons: Applying InputClass "evdev keyboard catchall"
    [    19.456] (II) Using input driver 'evdev' for 'Asus Laptop extra buttons'
    [    19.456] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [    19.456] (**) Asus Laptop extra buttons: always reports core events
    [    19.456] (**) Asus Laptop extra buttons: Device: "/dev/input/event5"
    [    19.456] (--) Asus Laptop extra buttons: Found keys
    [    19.456] (II) Asus Laptop extra buttons: Configuring as keyboard
    [    19.456] (**) Option "config_info" "udev:/sys/devices/platform/asus_laptop/input/input5/event5"
    [    19.456] (II) XINPUT: Adding extended input device "Asus Laptop extra buttons" (type: KEYBOARD, id 13)
    [    19.456] (**) Option "xkb_rules" "evdev"
    [    19.456] (**) Option "xkb_model" "pc105"
    [    19.456] (**) Option "xkb_layout" "pl"
    [    19.457] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [    19.457] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [    19.457] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [    19.457] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [    19.457] (**) AT Translated Set 2 keyboard: always reports core events
    [    19.457] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [    19.457] (--) AT Translated Set 2 keyboard: Found keys
    [    19.457] (II) AT Translated Set 2 keyboard: Configuring as keyboard
    [    19.457] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [    19.457] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
    [    19.457] (**) Option "xkb_rules" "evdev"
    [    19.457] (**) Option "xkb_model" "pc105"
    [    19.457] (**) Option "xkb_layout" "pl"
    [    19.457] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event6)
    [    19.457] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
    [    19.457] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
    [    19.457] (II) LoadModule: "synaptics"
    [    19.457] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [    19.499] (II) Module synaptics: vendor="X.Org Foundation"
    [    19.499] 	compiled for 1.11.2.902, module version = 1.5.0
    [    19.499] 	Module class: X.Org XInput Driver
    [    19.499] 	ABI class: X.Org XInput driver, version 13.0
    [    19.499] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
    [    19.499] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [    19.499] (**) ETPS/2 Elantech Touchpad: always reports core events
    [    19.500] (**) Option "Device" "/dev/input/event6"
    [    19.576] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 1280
    [    19.576] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 704
    [    19.576] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
    [    19.576] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 0
    [    19.576] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
    [    19.576] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
    [    19.608] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
    [    19.608] (**) ETPS/2 Elantech Touchpad: always reports core events
    [    19.640] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input6/event6"
    [    19.640] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 15)
    [    19.640] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
    [    19.640] (**) synaptics: ETPS/2 Elantech Touchpad: MaxSpeed is now 1.75
    [    19.640] (**) synaptics: ETPS/2 Elantech Touchpad: AccelFactor is now 0.137
    [    19.640] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
    [    19.640] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
    [    19.640] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
    [    19.640] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
    [    19.640] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
    [    19.641] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
    [    19.641] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
    [    19.641] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
    [    19.641] (II) No input driver specified, ignoring this device.
    [    19.641] (II) This device may have been added with another device file.
    [   129.891] (II) UnloadModule: "synaptics"
    [   129.891] (II) Unloading synaptics
    [   129.891] (II) AT Translated Set 2 keyboard: Close
    [   129.891] (II) UnloadModule: "evdev"
    [   129.891] (II) Unloading evdev
    [   129.891] (II) Asus Laptop extra buttons: Close
    [   129.891] (II) UnloadModule: "evdev"
    [   129.891] (II) Unloading evdev
    [   129.891] (II) Logitech USB Receiver: Close
    [   129.891] (II) UnloadModule: "evdev"
    [   129.891] (II) Unloading evdev
    [   129.891] (II) Logitech USB Receiver: Close
    [   129.891] (II) UnloadModule: "evdev"
    [   129.891] (II) Unloading evdev
    [   129.891] (II) USB 2.0 Camera: Close
    [   129.891] (II) UnloadModule: "evdev"
    [   129.891] (II) Unloading evdev
    [   129.891] (II) Sleep Button: Close
    [   129.891] (II) UnloadModule: "evdev"
    [   129.891] (II) Unloading evdev
    [   129.891] (II) Video Bus: Close
    [   129.891] (II) UnloadModule: "evdev"
    [   129.891] (II) Unloading evdev
    [   129.891] (II) Video Bus: Close
    [   129.891] (II) UnloadModule: "evdev"
    [   129.891] (II) Unloading evdev
    [   129.891] (II) Power Button: Close
    [   129.891] (II) UnloadModule: "evdev"
    [   129.891] (II) Unloading evdev
    [   129.908] Server terminated successfully (0). Closing log file.
    Jako że przy uruchamianiu systemu widziałem, że uruchamia mi się kdm, a nie zobaczyłem go, zerknąłem też do /var/log/kdm.log i ten jest podobny do tego sprzed konfiguracji xów przez nvidia-xconfig:
    Kod:
    ********************************************************************************
    Note that your system uses syslog. All of kdm's internally generated messages
    (i.e., not from libraries and external programs/scripts it uses) go to the
    daemon.* syslog facility; check your syslog configuration to find out to which
    file(s) it is logged. PAM logs messages related to authentication to authpriv.*.
    ********************************************************************************
    
    
    
    
    X.Org X Server 1.11.4
    Release Date: 2012-01-27
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 3.2.0-1-amd64 x86_64 Debian
    Current Operating System: Linux debian 3.2.0-2-amd64 #1 SMP Tue Mar 20 18:36:37 UTC 2012 x86_64
    Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-2-amd64 root=UUID=c9fc0c10-439e-468f-a16d-c227e47b021b ro quiet
    Build Date: 04 March 2012  11:42:13PM
    xorg-server 2:1.11.4-1 (Cyril Brulebois <kibi@debian.org>) 
    Current version of pixman: 0.24.4
    	Before reporting problems, check http://wiki.x.org
    	to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    	(++) from command line, (!!) notice, (II) informational,
    	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 30 22:30:33 2012
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
    >                   Ignoring extra symbols
    Errors from xkbcomp are not fatal to the X server
    (EE) Logitech USB Receiver: failed to initialize for relative axes.
    klauncher(1960) kdemain: No DBUS session-bus found. Check if you have started the DBUS server. 
    kdeinit4: Communication error with launcher. Exiting!
    kdmgreet(1611)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed:  "Not connected to D-Bus server" 
    
    
    kdmgreet(1611)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned 
    Server terminated successfully (0). Closing log file.
    Ostatnio edytowane przez fnmirk ; 31-03-2012 o 22:28

  4. #4
    A menadżer logowania masz w systemie jakiś? Może po aktualizacji go usunęło? Gdm3, lightdm kdm, slim?
    Ostatnio edytowane przez fnmirk ; 31-03-2012 o 22:21

  5. #5
    Jest kdm, w trakcie uruchamiania systemu mam informację, że się uruchamia, ale go nie widzę. W poprzednim poście jest też log z kdm.
    Ostatnio edytowane przez fnmirk ; 01-04-2012 o 22:04

  6. #6
    A próbowałeś po tym wszystkim jeszcze raz zainstalować sterowniki do karty graficznej?
    Jak użyłeś
    Kod:
    aptitude update 
    aptitude full-upgrade
    mogły jakieś pakiety, pójść w las.

  7. #7
    Cytat Napisał hashedone
    Kod:
    [    19.455] (EE) Logitech USB Receiver: failed to initialize for relative axes.
    Cytat Napisał Andyk
    A próbowałeś po tym wszystkim jeszcze raz zainstalować sterowniki do karty graficznej?
    Jak użyłeś
    W jakim celu ma to robić?
    Cytat Napisał hashedone
    Kod:
    [    14.502] (==) Using config file: "/etc/X11/xorg.conf"
    
    ...
    
    [    14.706] (==) ModulePath set to "/usr/lib/xorg/modules"
    [    14.706] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [    14.706] (WW) Disabling Keyboard0
    [    14.706] (WW) Disabling Mouse0
    Przecież ma dublujące się sterowniki urządzeń wejściowych. Mysz nie działa, a to jest wystarczający powód aby środowisko graficzne się nie uruchomiło

    Usuń plik /etc/X11/xorg.conf (zmień nazwę) i uruchom ponownie system. Jak nie będzie działać to przedstaw wynik:
    Kod:
    lspci -n
    I plik: /var/log/Xorg.0.log

Podobne wątki

  1. Środowisko graficzne na VPS-ie
    By widmo2004 in forum Serwer
    Odpowiedzi: 5
    Ostatni post/ autor: 26-08-2012, 06:37
  2. Odpowiedzi: 3
    Ostatni post/ autor: 13-04-2011, 12:13
  3. Jak wyłączyć środowisko graficzne?
    By grzesmlodzian in forum Główne tematy
    Odpowiedzi: 12
    Ostatni post/ autor: 04-04-2011, 15:39
  4. Środowisko graficzne
    By piatasz in forum Software
    Odpowiedzi: 1
    Ostatni post/ autor: 26-03-2010, 06:49
  5. Jak uruchomić środowisko graficzne?
    By Angolix3 in forum Desktop
    Odpowiedzi: 10
    Ostatni post/ autor: 22-02-2009, 16:47

Uprawnienia

  • Nie możesz zakładać nowych tematów
  • Nie możesz pisać wiadomości
  • Nie możesz dodawać załączników
  • Nie możesz edytować swoich postów
  •