Pokaż wyniki od 1 do 2 z 2

Temat: Czarny ekran po zalogowaniu się do KDE

  1. #1

    Czarny ekran po zalogowaniu się do KDE

    Witam.
    Po zalogowaniu się do kde jedyne co się pokazuje to czarny ekran. Po zabiciu kdm i uruchomieniu polecenia
    Kod:
    startx
    z konta roota kde działa sobie normalnie. Pracuje czasem z dwoma monitorami więc prawdopodobnie coś namieszałem w konfingu. Więc pytanie- gdzie kde przechowuje pliki konfiguracyjne na temat ekranu i jego właściwości? Prawdopodobnie po zgraniu ich wszystko będzie działać. System Debian testowy.

    Kod:
    lspci -k
    
    00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
    Subsystem: Dell Device 01cc
    Kernel driver in use: agpgart-intel
    00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
    Subsystem: Dell Device 01cc
    Kernel driver in use: i915
    00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
    Subsystem: Dell Device 01cc
    00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)
    Subsystem: Dell Device 01cc
    Kernel driver in use: snd_hda_intel
    00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 01)
    Kernel driver in use: pcieport
    00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 01)
    Kernel driver in use: pcieport
    00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev 01)
    Kernel driver in use: pcieport
    00:1c.3 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 4 (rev 01)
    Kernel driver in use: pcieport
    00:1d.0 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 01)
    Subsystem: Dell Device 01cc
    Kernel driver in use: uhci_hcd
    00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01)
    Subsystem: Dell Device 01cc
    Kernel driver in use: uhci_hcd
    00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01)
    Subsystem: Dell Device 01cc
    Kernel driver in use: uhci_hcd
    00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01)
    Subsystem: Dell Device 01cc
    Kernel driver in use: uhci_hcd
    00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01)
    Subsystem: Dell Device 01cc
    Kernel driver in use: ehci_hcd
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1)
    00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01)
    Subsystem: Dell Device 01cc
    00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 01)
    Subsystem: Dell Device 01cc
    Kernel driver in use: ata_piix
    00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 01)
    Subsystem: Dell Device 01cc
    Kernel driver in use: i801_smbus
    03:01.0 CardBus bridge: O2 Micro, Inc. Cardbus bridge (rev 21)
    Subsystem: Dell Device 01cc
    Kernel driver in use: yenta_cardbus
    03:01.4 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02)
    Subsystem: Dell Device 01cc
    Kernel driver in use: firewire_ohci
    09:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5752 Gigabit Ethernet PCI Express (rev 02)
    Subsystem: Dell Device 01cc
    Kernel driver in use: tg3
    0c:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
    Subsystem: Intel Corporation Device 1021
    Kernel driver in use: iwl3945
    Kod:
    lspci -n
    
    00:00.0 0600: 8086:27a0 (rev 03)
    00:02.0 0300: 8086:27a2 (rev 03)
    00:02.1 0380: 8086:27a6 (rev 03)
    00:1b.0 0403: 8086:27d8 (rev 01)
    00:1c.0 0604: 8086:27d0 (rev 01)
    00:1c.1 0604: 8086:27d2 (rev 01)
    00:1c.2 0604: 8086:27d4 (rev 01)
    00:1c.3 0604: 8086:27d6 (rev 01)
    00:1d.0 0c03: 8086:27c8 (rev 01)
    00:1d.1 0c03: 8086:27c9 (rev 01)
    00:1d.2 0c03: 8086:27ca (rev 01)
    00:1d.3 0c03: 8086:27cb (rev 01)
    00:1d.7 0c03: 8086:27cc (rev 01)
    00:1e.0 0604: 8086:2448 (rev e1)
    00:1f.0 0601: 8086:27b9 (rev 01)
    00:1f.2 0101: 8086:27c4 (rev 01)
    00:1f.3 0c05: 8086:27da (rev 01)
    03:01.0 0607: 1217:7135 (rev 21)
    03:01.4 0c00: 1217:00f7 (rev 02)
    09:00.0 0200: 14e4:1600 (rev 02)
    0c:00.0 0280: 8086:4222 (rev 02)

    Kod:
    dpkg --print-architecture
    
    i386
    /var/log/Xorg.0.log:
    Kod:
    [ 13.545]
    X.Org X Server 1.11.1.902 (1.11.2 RC 2)
    Release Date: 2011-10-28
    [ 13.562] X Protocol Version 11, Revision 0
    [ 13.562] Build Operating System: Linux 2.6.32-5-686-bigmem i686 Debian
    [ 13.562] Current Operating System: Linux snail 3.1.0-1-486 #1 Mon Nov 14 07:36:41 UTC 2011 i686
    [ 13.562] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.1.0-1-486 root=UUID=3051ead3-7915-4696-ad77-1558a5e4f1e7 ro quiet
    [ 13.562] Build Date: 02 November 2011 11:01:26AM
    [ 13.562] xorg-server 2:1.11.1.902-1 (Cyril Brulebois <kibi@debian.org>)
    [ 13.562] Current version of pixman: 0.24.0
    [ 13.562] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 13.562] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 13.563] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Dec 3 11:05:46 2011
    [ 13.605] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 13.635] (==) No Layout section. Using the first Screen section.
    [ 13.635] (==) No screen section available. Using defaults.
    [ 13.635] (**) |-->Screen "Default Screen Section" (0)
    [ 13.635] (**) | |-->Monitor "<default monitor>"
    [ 13.649] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 13.650] (==) Automatically adding devices
    [ 13.650] (==) Automatically enabling devices
    [ 13.700] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
    [ 13.700] Entry deleted from font path.
    [ 13.794] (WW) `fonts.dir' not found (or not valid) in "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType".
    [ 13.794] Entry deleted from font path.
    [ 13.794] (Run 'mkfontdir' on "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType").
    [ 13.794] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    built-ins
    [ 13.794] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 13.794] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 13.808] (II) Loader magic: 0xb7794580
    [ 13.808] (II) Module ABI versions:
    [ 13.808] X.Org ANSI C Emulation: 0.4
    [ 13.808] X.Org Video Driver: 11.0
    [ 13.808] X.Org XInput driver : 13.0
    [ 13.808] X.Org Server Extension : 6.0
    [ 13.809] (--) PCI:*(0:0:2:0) 8086:27a2:1028:01cc rev 3, Mem @ 0xeff00000/524288, 0xd0000000/268435456, 0xefec0000/262144, I/O @ 0x0000eff8/8
    [ 13.809] (--) PCI: (0:0:2:1) 8086:27a6:1028:01cc rev 3, Mem @ 0xeff80000/524288
    [ 13.812] (II) Open ACPI successful (/var/run/acpid.socket)
    [ 13.812] (II) LoadModule: "extmod"
    [ 13.877] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 13.891] (II) Module extmod: vendor="X.Org Foundation"
    [ 13.891] compiled for 1.11.1.902, module version = 1.0.0
    [ 13.891] Module class: X.Org Server Extension
    [ 13.891] ABI class: X.Org Server Extension, version 6.0
    [ 13.891] (II) Loading extension SELinux
    [ 13.891] (II) Loading extension MIT-SCREEN-SAVER
    [ 13.891] (II) Loading extension XFree86-VidModeExtension
    [ 13.891] (II) Loading extension XFree86-DGA
    [ 13.891] (II) Loading extension DPMS
    [ 13.891] (II) Loading extension XVideo
    [ 13.891] (II) Loading extension XVideo-MotionCompensation
    [ 13.891] (II) Loading extension X-Resource
    [ 13.891] (II) LoadModule: "dbe"
    [ 13.891] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 13.892] (II) Module dbe: vendor="X.Org Foundation"
    [ 13.892] compiled for 1.11.1.902, module version = 1.0.0
    [ 13.892] Module class: X.Org Server Extension
    [ 13.892] ABI class: X.Org Server Extension, version 6.0
    [ 13.892] (II) Loading extension DOUBLE-BUFFER
    [ 13.892] (II) LoadModule: "glx"
    [ 13.892] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 13.898] (II) Module glx: vendor="X.Org Foundation"
    [ 13.898] compiled for 1.11.1.902, module version = 1.0.0
    [ 13.898] ABI class: X.Org Server Extension, version 6.0
    [ 13.898] (==) AIGLX enabled
    [ 13.898] (II) Loading extension GLX
    [ 13.898] (II) LoadModule: "record"
    [ 13.898] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 13.899] (II) Module record: vendor="X.Org Foundation"
    [ 13.899] compiled for 1.11.1.902, module version = 1.13.0
    [ 13.899] Module class: X.Org Server Extension
    [ 13.899] ABI class: X.Org Server Extension, version 6.0
    [ 13.899] (II) Loading extension RECORD
    [ 13.899] (II) LoadModule: "dri"
    [ 13.899] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 13.916] (II) Module dri: vendor="X.Org Foundation"
    [ 13.916] compiled for 1.11.1.902, module version = 1.0.0
    [ 13.916] ABI class: X.Org Server Extension, version 6.0
    [ 13.916] (II) Loading extension XFree86-DRI
    [ 13.916] (II) LoadModule: "dri2"
    [ 13.917] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 13.917] (II) Module dri2: vendor="X.Org Foundation"
    [ 13.917] compiled for 1.11.1.902, module version = 1.2.0
    [ 13.917] ABI class: X.Org Server Extension, version 6.0
    [ 13.917] (II) Loading extension DRI2
    [ 13.917] (==) Matched intel as autoconfigured driver 0
    [ 13.917] (==) Matched vesa as autoconfigured driver 1
    [ 13.917] (==) Matched fbdev as autoconfigured driver 2
    [ 13.918] (==) Assigned the driver to the xf86ConfigLayout
    [ 13.918] (II) LoadModule: "intel"
    [ 13.918] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 14.016] (II) Module intel: vendor="X.Org Foundation"
    [ 14.016] compiled for 1.11.1.902, module version = 2.17.0
    [ 14.016] Module class: X.Org Video Driver
    [ 14.016] ABI class: X.Org Video Driver, version 11.0
    [ 14.016] (II) LoadModule: "vesa"
    [ 14.016] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
    [ 14.082] (II) Module vesa: vendor="X.Org Foundation"
    [ 14.082] compiled for 1.11.0, module version = 2.3.0
    [ 14.082] Module class: X.Org Video Driver
    [ 14.082] ABI class: X.Org Video Driver, version 11.0
    [ 14.082] (II) LoadModule: "fbdev"
    [ 14.082] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
    [ 14.094] (II) Module fbdev: vendor="X.Org Foundation"
    [ 14.094] compiled for 1.11.0, module version = 0.4.2
    [ 14.094] ABI class: X.Org Video Driver, version 11.0
    [ 14.094] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
    Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
    Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
    Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
    Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
    [ 14.095] (II) VESA: driver for VESA chipsets: vesa
    [ 14.095] (II) FBDEV: driver for framebuffer: fbdev
    [ 14.095] (++) using VT number 7
    [ 14.135] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 14.135] (WW) Falling back to old probe method for vesa
    [ 14.135] (WW) Falling back to old probe method for fbdev
    [ 14.135] (II) Loading sub module "fbdevhw"
    [ 14.135] (II) LoadModule: "fbdevhw"
    [ 14.135] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
    [ 14.144] (II) Module fbdevhw: vendor="X.Org Foundation"
    [ 14.144] compiled for 1.11.1.902, module version = 0.0.2
    [ 14.144] ABI class: X.Org Video Driver, version 11.0
    [ 14.144] drmOpenDevice: node name is /dev/dri/card0
    [ 14.144] drmOpenDevice: open result is 9, (OK)
    [ 14.145] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    [ 14.145] drmOpenDevice: node name is /dev/dri/card0
    [ 14.145] drmOpenDevice: open result is 9, (OK)
    [ 14.145] drmOpenByBusid: drmOpenMinor returns 9
    [ 14.145] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    [ 14.145] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 14.145] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 14.145] (==) intel(0): RGB weight 888
    [ 14.145] (==) intel(0): Default visual is TrueColor
    [ 14.145] (II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
    [ 14.145] (--) intel(0): Chipset: "945GM"
    [ 14.145] (**) intel(0): Relaxed fencing disabled
    [ 14.145] (**) intel(0): Wait on SwapBuffers? enabled
    [ 14.145] (**) intel(0): Triple buffering? enabled
    [ 14.145] (**) intel(0): Framebuffer tiled
    [ 14.145] (**) intel(0): Pixmaps tiled
    [ 14.145] (**) intel(0): 3D buffers tiled
    [ 14.145] (**) intel(0): SwapBuffers wait enabled
    [ 14.145] (==) intel(0): video overlay key set to 0x101fe
    [ 14.145] (II) intel(0): Output LVDS1 has no monitor section
    [ 14.145] (II) intel(0): found backlight control interface /sys/class/backlight/intel_backlight
    [ 14.176] (II) intel(0): Output VGA1 has no monitor section
    [ 14.196] (II) intel(0): Output DVI1 has no monitor section
    [ 14.516] (II) intel(0): Output TV1 has no monitor section
    [ 14.517] (II) intel(0): EDID for output LVDS1
    [ 14.517] (II) intel(0): Manufacturer: SEC Model: 3250 Serial#: 0
    [ 14.517] (II) intel(0): Year: 2006 Week: 0
    [ 14.517] (II) intel(0): EDID Version: 1.3
    [ 14.517] (II) intel(0): Digital Display Input
    [ 14.517] (II) intel(0): Max Image Size [cm]: horiz.: 33 vert.: 21
    [ 14.517] (II) intel(0): Gamma: 2.20
    [ 14.517] (II) intel(0): No DPMS capabilities specified
    [ 14.517] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 14.517] (II) intel(0): First detailed timing is preferred mode
    [ 14.517] (II) intel(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
    [ 14.517] (II) intel(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
    [ 14.517] (II) intel(0): Manufacturer's mask: 0
    [ 14.517] (II) intel(0): Supported detailed timing:
    [ 14.517] (II) intel(0): clock: 119.2 MHz Image Size: 331 x 207 mm
    [ 14.517] (II) intel(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
    [ 14.517] (II) intel(0): v_active: 1050 v_sync: 1052 v_sync_end 1058 v_blanking: 1080 v_border: 0
    [ 14.517] (II) intel(0): Unknown vendor-specific block f
    [ 14.517] (II) intel(0): FD161154P2
    [ 14.517] (II) intel(0): (?HT}ŁÓ˙
    [ 14.517] (II) intel(0): EDID (in hex):
    [ 14.517] (II) intel(0): 00ffffffffffff004ca3503200000000
    [ 14.517] (II) intel(0): 00100103802115780a87f594574f8c27
    [ 14.517] (II) intel(0): 27505400000001010101010101010101
    [ 14.517] (II) intel(0): 010101010101932e90a0601a1e403020
    [ 14.517] (II) intel(0): 26004bcf100000190000000f00000000
    [ 14.517] (II) intel(0): 00000000003cd2026400000000fe0046
    [ 14.517] (II) intel(0): 443136310231353450320a20000000fe
    [ 14.517] (II) intel(0): 00283f48547da3d3ff02010a20200058
    [ 14.517] (II) intel(0): EDID vendor "SEC", prod id 12880
    [ 14.517] (II) intel(0): Printing DDC gathered Modelines:
    [ 14.517] (II) intel(0): Modeline "1680x1050"x0.0 119.23 1680 1728 1760 1840 1050 1052 1058 1080 -hsync -vsync (64.8 kHz)
    [ 14.517] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
    [ 14.517] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 14.517] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 14.517] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
    [ 14.517] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
    [ 14.517] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
    [ 14.517] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
    [ 14.517] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
    [ 14.517] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
    [ 14.517] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
    [ 14.517] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
    [ 14.517] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
    [ 14.517] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
    [ 14.517] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
    [ 14.518] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
    [ 14.518] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
    [ 14.518] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
    [ 14.518] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
    [ 14.518] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
    [ 14.518] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
    [ 14.518] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
    [ 14.518] (II) intel(0): Printing probed modes for output LVDS1
    [ 14.518] (II) intel(0): Modeline "1680x1050"x60.0 119.23 1680 1728 1760 1840 1050 1052 1058 1080 -hsync -vsync (64.8 kHz)
    [ 14.518] (II) intel(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
    [ 14.518] (II) intel(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
    [ 14.518] (II) intel(0): Modeline "1600x1024"x60.2 103.12 1600 1600 1656 1664 1024 1024 1029 1030 +hsync +vsync (62.0 kHz)
    [ 14.518] (II) intel(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz)
    [ 14.518] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [ 14.518] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
    [ 14.518] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
    [ 14.518] (II) intel(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz)
    [ 14.518] (II) intel(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz)
    [ 14.518] (II) intel(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz)
    [ 14.518] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 14.518] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 14.518] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 14.518] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 14.548] (II) intel(0): EDID for output VGA1
    [ 14.564] (II) intel(0): EDID for output DVI1
    [ 14.888] (II) intel(0): EDID for output TV1
    [ 14.888] (II) intel(0): Output LVDS1 connected
    [ 14.888] (II) intel(0): Output VGA1 disconnected
    [ 14.889] (II) intel(0): Output DVI1 disconnected
    [ 14.889] (II) intel(0): Output TV1 disconnected
    [ 14.889] (II) intel(0): Using exact sizes for initial modes
    [ 14.889] (II) intel(0): Output LVDS1 using initial mode 1680x1050
    [ 14.889] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 14.889] (II) intel(0): Kernel page flipping support detected, enabling
    [ 14.889] (**) intel(0): Display dimensions: (330, 210) mm
    [ 14.889] (**) intel(0): DPI set to (129, 126)
    [ 14.889] (II) Loading sub module "fb"
    [ 14.889] (II) LoadModule: "fb"
    [ 14.889] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 14.924] (II) Module fb: vendor="X.Org Foundation"
    [ 14.924] compiled for 1.11.1.902, module version = 1.0.0
    [ 14.924] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 14.924] (II) Loading sub module "dri2"
    [ 14.924] (II) LoadModule: "dri2"
    [ 14.925] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 14.925] (II) Module dri2: vendor="X.Org Foundation"
    [ 14.925] compiled for 1.11.1.902, module version = 1.2.0
    [ 14.925] ABI class: X.Org Server Extension, version 6.0
    [ 14.925] (II) UnloadModule: "vesa"
    [ 14.925] (II) Unloading vesa
    [ 14.925] (II) UnloadModule: "fbdev"
    [ 14.925] (II) Unloading fbdev
    [ 14.925] (II) UnloadModule: "fbdevhw"
    [ 14.925] (II) Unloading fbdevhw
    [ 14.925] (==) Depth 24 pixmap format is 32 bpp
    [ 14.925] (II) intel(0): [DRI2] Setup complete
    [ 14.925] (II) intel(0): [DRI2] DRI driver: i915
    [ 14.925] (II) intel(0): Allocated new frame buffer 1728x1050 stride 8192, tiled
    [ 14.976] (II) UXA(0): Driver registered support for the following operations:
    [ 14.976] (II) solid
    [ 14.976] (II) copy
    [ 14.976] (II) composite (RENDER acceleration)
    [ 14.976] (II) put_image
    [ 14.976] (II) get_image
    [ 14.976] (==) intel(0): Backing store disabled
    [ 14.977] (==) intel(0): Silken mouse enabled
    [ 14.977] (II) intel(0): Initializing HW Cursor
    [ 15.004] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 15.005] (==) intel(0): DPMS enabled
    [ 15.005] (==) intel(0): Intel XvMC decoder disabled
    [ 15.005] (II) intel(0): Set up textured video
    [ 15.005] (II) intel(0): Set up overlay video
    [ 15.005] (II) intel(0): direct rendering: DRI2 Enabled
    [ 15.005] (==) intel(0): hotplug detection: "enabled"
    [ 15.005] (--) RandR disabled
    [ 15.005] (II) Initializing built-in extension Generic Event Extension
    [ 15.005] (II) Initializing built-in extension SHAPE
    [ 15.005] (II) Initializing built-in extension MIT-SHM
    [ 15.005] (II) Initializing built-in extension XInputExtension
    [ 15.005] (II) Initializing built-in extension XTEST
    [ 15.005] (II) Initializing built-in extension BIG-REQUESTS
    [ 15.005] (II) Initializing built-in extension SYNC
    [ 15.005] (II) Initializing built-in extension XKEYBOARD
    [ 15.005] (II) Initializing built-in extension XC-MISC
    [ 15.005] (II) Initializing built-in extension SECURITY
    [ 15.005] (II) Initializing built-in extension XINERAMA
    [ 15.005] (II) Initializing built-in extension XFIXES
    [ 15.005] (II) Initializing built-in extension RENDER
    [ 15.005] (II) Initializing built-in extension RANDR
    [ 15.005] (II) Initializing built-in extension COMPOSITE
    [ 15.005] (II) Initializing built-in extension DAMAGE
    [ 15.005] (II) SELinux: Disabled on system
    [ 15.354] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 15.354] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 15.354] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 15.354] (II) AIGLX: enabled GLX_SGI_make_current_read
    [ 15.354] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 15.354] (II) AIGLX: Loaded and initialized i915
    [ 15.354] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 15.355] (II) intel(0): Setting screen physical size to 444 x 277
    [ 16.043] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
    [ 16.043] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 16.043] (II) LoadModule: "evdev"
    [ 16.043] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 16.060] (II) Module evdev: vendor="X.Org Foundation"
    [ 16.060] compiled for 1.11.0, module version = 2.6.0
    [ 16.060] Module class: X.Org XInput Driver
    [ 16.060] ABI class: X.Org XInput driver, version 13.0
    [ 16.060] (II) Using input driver 'evdev' for 'Video Bus'
    [ 16.060] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 16.060] (**) Video Bus: always reports core events
    [ 16.060] (**) Video Bus: Device: "/dev/input/event5"
    [ 16.060] (--) Video Bus: Found keys
    [ 16.060] (II) Video Bus: Configuring as keyboard
    [ 16.060] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:01/input/input5/event5"
    [ 16.060] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
    [ 16.060] (**) Option "xkb_rules" "evdev"
    [ 16.060] (**) Option "xkb_model" "pc105"
    [ 16.060] (**) Option "xkb_layout" "pl"
    [ 16.133] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 16.133] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 16.133] (II) Using input driver 'evdev' for 'Power Button'
    [ 16.133] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 16.133] (**) Power Button: always reports core events
    [ 16.133] (**) Power Button: Device: "/dev/input/event2"
    [ 16.133] (--) Power Button: Found keys
    [ 16.133] (II) Power Button: Configuring as keyboard
    [ 16.133] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
    [ 16.133] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 16.133] (**) Option "xkb_rules" "evdev"
    [ 16.133] (**) Option "xkb_model" "pc105"
    [ 16.133] (**) Option "xkb_layout" "pl"
    [ 16.133] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
    [ 16.133] (II) No input driver/identifier specified (ignoring)
    [ 16.134] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
    [ 16.134] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 16.134] (II) Using input driver 'evdev' for 'Sleep Button'
    [ 16.134] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 16.134] (**) Sleep Button: always reports core events
    [ 16.134] (**) Sleep Button: Device: "/dev/input/event3"
    [ 16.134] (--) Sleep Button: Found keys
    [ 16.134] (II) Sleep Button: Configuring as keyboard
    [ 16.134] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
    [ 16.134] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
    [ 16.134] (**) Option "xkb_rules" "evdev"
    [ 16.134] (**) Option "xkb_model" "pc105"
    [ 16.134] (**) Option "xkb_layout" "pl"
    [ 16.135] (II) config/udev: Adding input device HDA Intel Mic at Ext Left Jack (/dev/input/event11)
    [ 16.135] (II) No input driver/identifier specified (ignoring)
    [ 16.135] (II) config/udev: Adding input device HDA Intel HP Out at Ext Left Jack (/dev/input/event12)
    [ 16.135] (II) No input driver/identifier specified (ignoring)
    [ 16.135] (II) config/udev: Adding input device MLK USB Multi-Smart Mouse (/dev/input/event9)
    [ 16.136] (**) MLK USB Multi-Smart Mouse: Applying InputClass "evdev pointer catchall"
    [ 16.136] (**) MLK USB Multi-Smart Mouse: Applying InputClass "evdev keyboard catchall"
    [ 16.136] (II) Using input driver 'evdev' for 'MLK USB Multi-Smart Mouse'
    [ 16.136] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 16.136] (**) MLK USB Multi-Smart Mouse: always reports core events
    [ 16.136] (**) MLK USB Multi-Smart Mouse: Device: "/dev/input/event9"
    [ 16.136] (--) MLK USB Multi-Smart Mouse: Found 16 mouse buttons
    [ 16.136] (--) MLK USB Multi-Smart Mouse: Found scroll wheel(s)
    [ 16.136] (--) MLK USB Multi-Smart Mouse: Found relative axes
    [ 16.136] (--) MLK USB Multi-Smart Mouse: Found x and y relative axes
    [ 16.136] (--) MLK USB Multi-Smart Mouse: Found absolute axes
    [ 16.136] (--) MLK USB Multi-Smart Mouse: Found keys
    [ 16.136] (II) MLK USB Multi-Smart Mouse: Configuring as mouse
    [ 16.136] (II) MLK USB Multi-Smart Mouse: Configuring as keyboard
    [ 16.136] (II) MLK USB Multi-Smart Mouse: Adding scrollwheel support
    [ 16.136] (**) MLK USB Multi-Smart Mouse: YAxisMapping: buttons 4 and 5
    [ 16.136] (**) MLK USB Multi-Smart Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 16.136] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input9/event9"
    [ 16.136] (II) XINPUT: Adding extended input device "MLK USB Multi-Smart Mouse" (type: KEYBOARD, id 9)
    [ 16.136] (**) Option "xkb_rules" "evdev"
    [ 16.136] (**) Option "xkb_model" "pc105"
    [ 16.136] (**) Option "xkb_layout" "pl"
    [ 16.136] (II) MLK USB Multi-Smart Mouse: initialized for relative axes.
    [ 16.136] (WW) MLK USB Multi-Smart Mouse: ignoring absolute axes.
    [ 16.136] (**) MLK USB Multi-Smart Mouse: (accel) keeping acceleration scheme 1
    [ 16.136] (**) MLK USB Multi-Smart Mouse: (accel) acceleration profile 0
    [ 16.136] (**) MLK USB Multi-Smart Mouse: (accel) acceleration factor: 2.000
    [ 16.136] (**) MLK USB Multi-Smart Mouse: (accel) acceleration threshold: 4
    [ 16.137] (II) config/udev: Adding input device MLK USB Multi-Smart Mouse (/dev/input/mouse2)
    [ 16.137] (II) No input driver/identifier specified (ignoring)
    [ 16.137] (II) config/udev: Adding input device LITEON Technology USB Multimedia Keyboard (/dev/input/event10)
    [ 16.137] (**) LITEON Technology USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 16.137] (II) Using input driver 'evdev' for 'LITEON Technology USB Multimedia Keyboard'
    [ 16.137] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 16.137] (**) LITEON Technology USB Multimedia Keyboard: always reports core events
    [ 16.137] (**) LITEON Technology USB Multimedia Keyboard: Device: "/dev/input/event10"
    [ 16.137] (--) LITEON Technology USB Multimedia Keyboard: Found keys
    [ 16.137] (II) LITEON Technology USB Multimedia Keyboard: Configuring as keyboard
    [ 16.137] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input10/event10"
    [ 16.137] (II) XINPUT: Adding extended input device "LITEON Technology USB Multimedia Keyboard" (type: KEYBOARD, id 10)
    [ 16.137] (**) Option "xkb_rules" "evdev"
    [ 16.137] (**) Option "xkb_model" "pc105"
    [ 16.137] (**) Option "xkb_layout" "pl"
    [ 16.138] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 16.138] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 16.138] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 16.138] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 16.138] (**) AT Translated Set 2 keyboard: always reports core events
    [ 16.138] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 16.138] (--) AT Translated Set 2 keyboard: Found keys
    [ 16.138] (II) AT Translated Set 2 keyboard: Configuring as keyboard
    [ 16.138] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 16.138] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
    [ 16.138] (**) Option "xkb_rules" "evdev"
    [ 16.138] (**) Option "xkb_model" "pc105"
    [ 16.138] (**) Option "xkb_layout" "pl"
    [ 16.139] (II) config/udev: Adding input device DualPoint Stick (/dev/input/event7)
    [ 16.139] (**) DualPoint Stick: Applying InputClass "evdev pointer catchall"
    [ 16.139] (II) Using input driver 'evdev' for 'DualPoint Stick'
    [ 16.139] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 16.139] (**) DualPoint Stick: always reports core events
    [ 16.139] (**) DualPoint Stick: Device: "/dev/input/event7"
    [ 16.139] (--) DualPoint Stick: Found 3 mouse buttons
    [ 16.139] (--) DualPoint Stick: Found relative axes
    [ 16.139] (--) DualPoint Stick: Found x and y relative axes
    [ 16.139] (II) DualPoint Stick: Configuring as mouse
    [ 16.139] (**) DualPoint Stick: YAxisMapping: buttons 4 and 5
    [ 16.139] (**) DualPoint Stick: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 16.139] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event7"
    [ 16.139] (II) XINPUT: Adding extended input device "DualPoint Stick" (type: MOUSE, id 12)
    [ 16.139] (II) DualPoint Stick: initialized for relative axes.
    [ 16.139] (**) DualPoint Stick: (accel) keeping acceleration scheme 1
    [ 16.139] (**) DualPoint Stick: (accel) acceleration profile 0
    [ 16.139] (**) DualPoint Stick: (accel) acceleration factor: 2.000
    [ 16.139] (**) DualPoint Stick: (accel) acceleration threshold: 4
    [ 16.140] (II) config/udev: Adding input device DualPoint Stick (/dev/input/mouse0)
    [ 16.140] (II) No input driver/identifier specified (ignoring)
    [ 16.140] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/event8)
    [ 16.140] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "evdev touchpad catchall"
    [ 16.140] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "touchpad catchall"
    [ 16.140] (II) LoadModule: "synaptics"
    [ 16.140] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 16.188] (II) Module synaptics: vendor="X.Org Foundation"
    [ 16.188] compiled for 1.11.0, module version = 1.4.1
    [ 16.188] Module class: X.Org XInput Driver
    [ 16.188] ABI class: X.Org XInput driver, version 13.0
    [ 16.188] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS DualPoint TouchPad'
    [ 16.188] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 16.188] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
    [ 16.188] (**) Option "Device" "/dev/input/event8"
    [ 16.188] (--) AlpsPS/2 ALPS DualPoint TouchPad: x-axis range 0 - 1023
    [ 16.188] (--) AlpsPS/2 ALPS DualPoint TouchPad: y-axis range 0 - 767
    [ 16.188] (--) AlpsPS/2 ALPS DualPoint TouchPad: pressure range 0 - 127
    [ 16.188] (--) AlpsPS/2 ALPS DualPoint TouchPad: buttons: left right middle
    [ 16.188] (--) AlpsPS/2 ALPS DualPoint TouchPad: invalid finger width range. defaulting to 0 - 16
    [ 16.188] (--) AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
    [ 16.188] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
    [ 16.189] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event8"
    [ 16.189] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint TouchPad" (type: TOUCHPAD, id 13)
    [ 16.189] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) MinSpeed is now constant deceleration 2.5
    [ 16.189] (**) AlpsPS/2 ALPS DualPoint TouchPad: MaxSpeed is now 1.75
    [ 16.189] (**) AlpsPS/2 ALPS DualPoint TouchPad: AccelFactor is now 0.156
    [ 16.189] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) keeping acceleration scheme 1
    [ 16.189] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration profile 1
    [ 16.189] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration factor: 2.000
    [ 16.189] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration threshold: 4
    [ 16.189] (--) AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
    [ 16.189] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/mouse1)
    [ 16.189] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "touchpad catchall"
    [ 16.189] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS DualPoint TouchPad'
    [ 16.189] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 16.189] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
    [ 16.189] (**) Option "Device" "/dev/input/mouse1"
    [ 16.189] (--) AlpsPS/2 ALPS DualPoint TouchPad: invalid x-axis range. defaulting to 1615 - 5685
    [ 16.189] (--) AlpsPS/2 ALPS DualPoint TouchPad: invalid y-axis range. defaulting to 1729 - 4171
    [ 16.189] (--) AlpsPS/2 ALPS DualPoint TouchPad: invalid pressure range. defaulting to 0 - 256
    [ 16.190] (--) AlpsPS/2 ALPS DualPoint TouchPad: invalid finger width range. defaulting to 0 - 16
    [ 16.210] (EE) Query no Synaptics: 6003C8
    [ 16.210] (--) AlpsPS/2 ALPS DualPoint TouchPad: no supported touchpad found
    [ 16.210] (EE) AlpsPS/2 ALPS DualPoint TouchPad Unable to query/initialize Synaptics hardware.
    [ 16.210] (EE) PreInit returned 11 for "AlpsPS/2 ALPS DualPoint TouchPad"
    [ 16.210] (II) UnloadModule: "synaptics"
    [ 16.210] (II) Unloading synaptics
    [ 16.210] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
    [ 16.210] (II) No input driver/identifier specified (ignoring)
    [ 16.211] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event13)
    [ 16.211] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
    [ 16.211] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device'
    [ 16.211] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 16.211] (**) ACPI Virtual Keyboard Device: always reports core events
    [ 16.211] (**) ACPI Virtual Keyboard Device: Device: "/dev/input/event13"
    [ 16.211] (--) ACPI Virtual Keyboard Device: Found keys
    [ 16.211] (II) ACPI Virtual Keyboard Device: Configuring as keyboard
    [ 16.211] (**) Option "config_info" "udev:/sys/devices/virtual/input/input13/event13"
    [ 16.211] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD, id 14)
    [ 16.211] (**) Option "xkb_rules" "evdev"
    [ 16.211] (**) Option "xkb_model" "pc105"
    [ 16.211] (**) Option "xkb_layout" "pl"
    [ 16.214] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event4)
    [ 16.214] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
    [ 16.214] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
    [ 16.214] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 16.214] (**) Dell WMI hotkeys: always reports core events
    [ 16.214] (**) Dell WMI hotkeys: Device: "/dev/input/event4"
    [ 16.214] (--) Dell WMI hotkeys: Found keys
    [ 16.214] (II) Dell WMI hotkeys: Configuring as keyboard
    [ 16.214] (**) Option "config_info" "udev:/sys/devices/virtual/input/input4/event4"
    [ 16.214] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 15)
    [ 16.214] (**) Option "xkb_rules" "evdev"
    [ 16.214] (**) Option "xkb_model" "pc105"
    [ 16.214] (**) Option "xkb_layout" "pl"
    [ 216.793] (II) AIGLX: Suspending AIGLX clients for VT switch
    Załączone pliki Załączone pliki
    Ostatnio edytowane przez fnmirk ; 03-12-2011 o 16:15

  2. #2
    Błąd jaki popełniasz to uruchamianie środowiska graficznego jako root. Uruchom system normalnie. Następnie zrestartuj i z pomocą jakiejś wersji livecd Linuksa, przedstaw jeszcze raz, plik /var/log/Xorg.0.log z nieudanej sesji.

Podobne wątki

  1. Czarny ekran w terminalu
    By Andrews in forum Główne tematy
    Odpowiedzi: 6
    Ostatni post/ autor: 24-01-2009, 04:56
  2. SDL i czarny ekran?
    By lays in forum Software
    Odpowiedzi: 2
    Ostatni post/ autor: 14-06-2008, 13:45
  3. xdtv czarny ekran
    By miras_w in forum Software
    Odpowiedzi: 15
    Ostatni post/ autor: 04-01-2008, 11:28
  4. FGLRX i czarny ekran...
    By ZinC in forum Hardware
    Odpowiedzi: 2
    Ostatni post/ autor: 24-08-2007, 12:23
  5. Czarny ekran.
    By dawideo in forum Desktop
    Odpowiedzi: 4
    Ostatni post/ autor: 10-08-2007, 20:51

Uprawnienia

  • Nie możesz zakładać nowych tematów
  • Nie możesz pisać wiadomości
  • Nie możesz dodawać załączników
  • Nie możesz edytować swoich postów
  •